Rhino-Rack Roof Rack for Factory Tracks - 2 Vortex Aero Crossbars - Black - 59" Bars
(3000 reviews)
Price: $358.15
In Stock
Rhino-Rack Roof Rack for Factory Tracks - 2 Vortex Aero Crossbars - Black - 59" Bars
Item # Y02-490B-NT
Retail:$506.99
Our Price: $358.15
You Save: $148.84
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (3000)
- Q & A (0)
- Photos
Rhino Rack Roof Rack - Y02-490B-NT
- Camper Shell Systems
- Aero Bars
- 2 Bars
- 59 Inch Bar Space
- Rhino Rack
- Black
- Overhang
Use your Rhino-Rack Aero accessories on your vehicle with factory roof-rack tracks. Locking, Quick Mount legs mount to tracks. Black, Vortex Aero crossbars accommodate clamp-on and channel-mount gear.
Features:
- Adjustable roof-rack lets you carry gear on your vehicle's factory roof-rack tracks
- 4 Quick Mount legs mount in the channels of tracks to create mounting points for crossbars
- Durable, glass-reinforced nylon construction
- Quick-release trigger system allows for easy, tool-free installation
- Squeeze internal triggers to release legs from bases
- Slide triggers apart to secure legs to bases
- Bases remain mounted to tracks
- Locks in covers let you secure the system to your vehicle
- Pivoting bases offer 33 degrees of adjustment to help level crossbars
- Precision-molded inserts cover bases when the legs are removed
- 2 Vortex Aero black, elliptical crossbars hold ladder racks, conduit cases and other work accessories
- Bars mount to roof-rack legs using built-in channels on bottoms of bars
- Lightweight, structural-grade, extruded aluminum construction for strength, durability and maximum carrying capability
- Built-in C-channel on top of each bar lets you mount Rhino-Rack accessories and carriers
- Rubber strips in the channels help to cushion load and provide slip resistance
- Can be cut to accommodate track-mounted accessories and carriers
Specs:
- Weight capacity: 220 lbs
- Always observe your vehicle's maximum roof load capacity
- Crossbar dimensions: 59" long x 3-1/2" wide x 1-1/2" tall
- Leg height: 3"
- Limited lifetime warranty
The bases of these Rhino Rack legs easily mount into Thule or Yakima roof-rack tracks. After the initial setup, you can leave the bases in the tracks.
Molded inserts help keep out dirt and provide a finished look when there are no legs and crossbars installed. To install a leg, simply remove the insert.
Once you've set up the bases, installing and removing your roof rack is easy. The Quick Mount legs have an integrated trigger system that creates an easy, tool-free installation.
To install a leg in a base, pinch and slide the internal triggers together.
Lower the leg onto the base and slide the internal triggers apart to secure the leg in the base.
Once the leg is installed in the base, replace the cover and lock it to help secure the system to your roof.
Y02-490B-NT Rhino Rack Track Mounted Roof Rack for Factory Tracks - 2 Aero Elliptical Cross Bars - Black - 59" Long
Installation Details
Customer Satisfaction Score:
92% were satisfied with this product
8% of customers were not satisfied
- Wrong item was ordered
- etrailer mistake
- Arrived Damaged
Customer Reviews
Rhino-Rack Roof Rack for Factory Tracks - 2 Vortex Aero Crossbars - Black - 59" Bars - Y02-490B-NT
Average Customer Rating: 4.7 out of 5 stars (3000 Customer Reviews)
Use your Rhino-Rack Aero accessories on your vehicle with factory roof-rack tracks. Locking, Quick Mount legs mount to tracks. Black, Vortex Aero crossbars accommodate clamp-on and channel-mount gear.by: James03/17/2023
While these seem very popular and generally well reviewed ( the reason I tried them) I cant see why, generally cheaply made molded parts with a just adequate fit. Most shocking were the pins that hold the towers and bars down to the base being plastic. Im sure Ill find some use for them but it wont be with my carbon fiber canoe on top, I just dont have the confidence in the connection. While they may be aerodynamic they are definitely not quiet on my installation. The locks can easily be defeated with a screwdriver. At this price I would look at other brands that might have a more positive and secure fit from bar to base. The service from etrailer was its usually quick and correct shipment and delivery though!
by: Tim04/13/2022
Overall unimpressed. Item took nearly a month to arrive from eTrailer despite being in-stock and an estimated delivery time of two days at checkout. The rack looks good but the leg locking bars are made of plastic, not sure why for the price. Not enough hardware was supplied to install following the instructions. Instructions show split lock washers on each bolt. Had to purchase additional split lock washers. Not impressed with the fact that I now need to keep up with 3 specialty tools to service/remove this rack that is supposed to be quick release. 1 key to lock the bases, 1 key to remove the bar end caps and a 5mm safety post Allen which is a stupid tool anyway. The hardware should be standard Allen or torx not safety. The tube end caps should be able to be removed with a flat head or normal tool and not a proprietary key. This would eliminate two superfluous tools. Overall I would not buy this rack again, I would go with a different system.
by: Michael05/23/2023
Shipped quickly. Package intact. Easy install. Etrailer makes transactions quick and easy. Always satisfied with their service.
by: Gary B.08/21/2019
The Rhino Rack roof rack system fit perfectly on my A.R.E. truck cap with Yakita tracks. The 54" Aero Bars were just the right length and it was a very easy install. Rhino Rack has blended functionality, smart looks and security into this system. I would highly recommend Rhino Rack for similar applications.
by: Jonathan 07/24/2023
High marks for the build quality. Rhino Rack pays attention to details and makes a solid product all around.
by: Matt 08/11/2022
Fit perfectly to my truck cap Yakima rails. Great system. All possible necessary parts were included in the installation kit; therefore, they will fit Thule tracks too.
by: Brendan05/05/2022
Crossbars have a minimum track width that is not listed on the product page.
The 59" (1500mm) bars have only 300mm of mounting space on the ends to connect the mounting legs. This is not found anywhere on the product page. Accounting for the offset of the mounting legs, your factory tracks must be at least ~1000mm apart to fit these crossbars. The tracks on my truck cap are 800mm apart (SnugTop Hi-Liner) so the cross bars did not fit.
etrailer customer service was courteous but not very helpful. I went in circles answering the same questions before contacting the manufacturer directly. One star for the hardware seeming well designed and solidly built. A second star for the return process being uncomplicated and the refund prompt.
by: Richard 12/04/2022
Pretty good. The rubber that seats inside the racks can dislodge when trying to slide heavy items onto the rack. Overall a good quality rack.
by: Richard02/19/2019
This product arrived in perfect condition due to the excellent way it was packaged. It has instructions that appear to be clear and usable. I will install this carrier on the Leer canopy on my 2018 Ram and the primary use will be to carry my canoe. I have not tried to install it yet due to continued snow, which is also keeping any urge to use the canoe at bay.
by: Michael 09/18/2022
These are awesome. Well built and look great on the truck.
by: Jesse 11/15/2023
by: David 12/27/2022
by: Robert 08/14/2023
by: Ulysses08/01/2022
by: Kevin02/22/2023
by: Ronald 06/29/2023
by: Marlon 12/23/2021
by: Chuck 08/25/2021
by: Stephen08/14/2022
Great addition to the bed track of my 2022 Hyundai Santa Cruz! I got these for my rhino rack rod holder since they made such noise on the oem roof rack. So happy I went with rhino rack. You can't beat the price and the quality is as good if not better than Thule or Yakima. Highly reccomend.
by: David07/04/2023
I wanted to share the items I used to be able to haul two Wilderness Systems Tsunami 145 kayaks on my 2006 Scion xB. This may help others who struggle with deciding what to use. I am pleased with my purchase and hope this helps. I originally thought I wanted the Thule Hull-A-Port Aero, but they discontinued making the fit kit for their roof rack systems and I ended up going with the Kuats. I am glad that they didn’t make the fit kit for approximately $[XX] and so they missed out on the rest of my business. Here are the items I used for anyone interested – pictures included. Custom DK Fit Kit for 4 Rhino-Rack 2500 Series Roof Rack Legs - Naked Roof #DK138, Kuat Class 4 V2 Kayak Carrier w/ Tie-Downs - J-Style - Folding - 1 Kayak - Black #KU53VR and these are really cool, Rhino-Rack 2500 Series Legs for Vortex Aero Crossbars - Naked Roofs or Fixed Mounting Points - Qty 4 #RRRLKVA, Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 54" Long - Qty 2 #RRVA137-B2. The 54” crossbars fit really well and the perfect length in my opinion and it doesn’t stick out like the longer ones would. Also purchased two sets of these Malone QuickLash T-Style Hood Loops for Bow and Stern Tie-Downs - Qty 2 #MPG308.
by: E. Stone06/11/2023
The selection process that etrailer uses is top-notch. This really helped narrow down the choices for my 2019 RAM Quad cab. I bought this all kitted together. The assembly process is very straightforward and well-documented. I would highly recommend etrailer as a source for vehicle accessories. I have Yakima bike racks on our Subaru and this is as good if not better.
by: Richard06/12/2022
2020 Ford Edge with Vista Roof. Product arrived ahead of predicted delivery date. Very easy to assemble and directions were very easy to follow. Product is very high quality. I found 150mm front and 140mm rear to be the correct dimensions (I read a feedback that said they were not correct). No problems with Vista Roof, legs sit on the metal roof part not the glass. Overall very pleased with my purchase.
by: Mindy06/28/2022
Indeed they were the wrong parts in the box marked demo on them.
The new parts came and I was able to
Put it on my car with no problem!!
Thank you for listening to me and helping me problem solve. It looks great on my car and I'm ready to load the kayaks now!!
Kalie is a gal that sent me some return labels so I'm going to put that on the box and send it back to you guys!
by: Skip07/10/2023
Product fits the Thule rails on the Leer camper shell on my 2019 Tacoma. Had to remove the back mount end to get the rail nuts on as the rails did not have a slot to fit the nuts in. One nut that attaches the feet to the crossbars was machined wrong but there were enough extra parts to get around the problem. Shipped via USPS which was slow and hard to track. I live in rural Iowa and had to go to town to pick up as the carrier just left a note saying it was at the post office.
by: Michael 11/14/2022
Look great, and function great. Just make sure you find all the parts packaged inside the rails themselves after you open the box!
25
3003
Show More Reviews
See what our Experts say about this Rhino Rack Roof Rack
- Does Rhino Rack Roof Rack for Factory Tracks Fit Directly to ARE Camper Shell TracksThe Rhino-Rack Roof Rack for Factory Tracks # Y02-490B-NT that you referenced will fit directly to the channels you have on the top of your ARE camper shell without requiring any other adapters.
view full answer...
- Roof Rack Recommendation for Tracks on ARE Topper for 2012 Toyota Tacoma and Roof Top TentThe Rhino-Rack Roof Rack for Factory Tracks # Y02-490B-NT is going to be your best bet for the tracks on the ARE topper for your 2012 Toyota Tacoma. The weight capacity is 220 lbs like you mentioned, but that's going to be the highest you'll see out of a roof rack, and your ARE topper likely doesn't even have that high of a capacity either. The only way for you to get to a 500 lb capacity is by going with a ladder rack and ditching the topper. With all of that being said, I think the reason...
view full answer...
- Rhino-Rack Vortex Roof Rack to Fit Thule Tracks on Leer Truck CapThe Rhino-Rack Aero Bar Roof Rack for Camper Shells # Y02-490B that you referenced actually comes with the tracks so since you already have Thule tracks on your Leer truck cap you need part # Y02-490B-NT instead.
view full answer... - Will Rhino-Rack Roof Rack for Factory Tracks # Y02-490B-NT Fit Into Rhino Rack Roof TracksYes, the Rhino-Rack Roof Rack for Factory Tracks # Y02-490B-NT that you referenced would fit into a set of Rhino Rack RTC roof tracks like you have installed on your 2019 Ford Transit Connect.
view full answer... - Will Rhino-Rack Roof Rack for Factory Tracks Fit 2011 ARE Truck Topper TracksYes, the Rhino-Rack Roof Rack for Factory Tracks # Y02-490B-NT will fit directly to the tracks on your ARE truck topper. I really like this system because it comes with everything you need and the legs have the quick-release feature if you every need to remove the roof rack from your truck.
view full answer...
- Does Rhino Rack Roof rack for Factory Tracks Fit Tracks on SnugTop Camper ShellThe Rhino-Rack Roof Rack for Factory Tracks # Y02-490B-NT that you referenced is a direct fit for the factory tracks you have on top of your SnugTop camper shell. This comes with everything you'd need too so you wouldn't need any additional parts.
view full answer... - Will Rhino Rack Roof Rack for Factory Tracks Fit Yakima TracksYes the Rhino-Rack Roof Rack for Factory Tracks # Y02-490B-NT will fit Yakima tracks as well.
view full answer... - Will Rhino-Rack Roof Rack For Factory Tracks Fit My Leer Topper With Factory TracksYes, the Rhino-Rack Roof Rack for Factory Tracks - 2 Vortex Aero Crossbars - Black - 54" Long, part # Y02-480B-NT, will fit the tracks on your Leer topper. I have included a product description link below.
view full answer... - Does Rhino-Rack Roof Rack for Factory Tracks # Y02-480B-NT Fit Truck Hero TS RailsYes the Rhino-Rack Roof Rack for Factory Tracks # Y02-490B-NT that you referenced does fit the Truxedo Truck Hero TS rails you mentioned.
view full answer... - Can the Track on the Rhino-Rack Aero Bar Roof Rack for Camper Shells Be Trimmed for a 5' BedThe track on the Rhino-Rack Aero Bar Roof Rack for Camper Shells # Y02-490B can be cut down to the size you need. But, the crossbars cannot be cut. That being said, you should not need to trim down the crossbars. It is also important to note that the wider slot on whichever end is trimmed will be gone, so installation and removal of the crossbars would need to be from the untrimmed edge. You could also use the Rhino-Rack Roof Rack for Factory Tracks # Y02-490B-NT (59") with shorter tracks,...
view full answer... - Installation of Track Mounted Rhino-Rack System on Tonneau Cover When Trimming Length is RequiredFor your Undercover SE Tonneau cover on your 2019 Chevy Colorado you can use the Rhino-Rack Roof Rack System w/ 2 Vortex Aero Crossbars - Track Mount - Black - 59" Long # Y02-490B will work by simply trimming the tracks as you mentioned. There isn't a specific amount to be trimmed, they can simply be trimmed to your desired length. Note that the wider slot on whichever end is trimmed will be lost so removal would need to be from the untrimmed edge. Alternatively you can use the Rhino-Rack...
view full answer...
- Will The Rhino-Rack Aero Bar Roof Rack For Camper Shells Fit A Leer Truck Topper 100XQ?The Rhino-Rack Aero Bar Roof Rack for Camper Shells - Track Mount - Black - Standard - 59" Long # Y02-490B is a universal roof rack and can be adjusted to fit various camper shells. The track length is 63" on this roof rack but they can be trimmed down to fit a smaller camper shell if need be. Another solution is to use Rhino-Rack RTC-Style Roof Rack Tracks - Channel Mount - 55" Long - Qty 2 # RTC14 which are 55" long tracks. Then you can add Rhino Rack Track Mounted Roof Rack # Y02-490B-NT...
view full answer... - Rhino Rack Roof Rack that Attaches to Thule Tracks on Leer Camper ShellSince your Leer camper shell has a set of Thule roof tracks installed on it you'd actually want the Rhino Rack Roof Rack part # Y02-490B-NT which was designed to attach to those top channels. The kit you mentioned was designed to attach to a roof by drilling into it and attaching in that manner.
view full answer... - Rhino Rack Y02-490-NT Crossbar AvailabilityYes, we carry the Rhino-Rack Roof Rack for Factory Tracks # Y02-490B-NT. The base of these Rhino Rack legs easily mount into Thule or Yakima roof-rack tracks. If you don't have those kind of mounts then send me in a picture and I can find the correct base/crossbar combination to connect to the roof of your 2021 Mercedes-Benz Metris.
view full answer... - Roof Rack for Tracks of ARE Camper ShellRhino Rack has aero bar roof racks that fit directly to the ARE camper shell roof tracks you have now with the part # Y02-480B-NT for a 54 inch long crossbar or part # Y02-490B-NT for 59 inch bars. This would be an easy and great option to add a roof rack to your camper shell.
view full answer... - Replacement Setup In Place Of The Thule Tracker II TowersThank you for the picture! I took a look at your Thule Tracker II tower, and turns out Thule actually phased out the entire system including the feet, towers, and fit kit. I know it's not ideal, but the best option is to replace your entire system with your new system. I recommend taking a look at the Rhino-Rack Roof Rack for Factory Tracks # Y02-480B-NT for a 54" bar setup, or the Rhino-Rack Roof Rack for Factory Tracks # Y02-490B-NT for a 59" long bar setup. Both of these bars will...
view full answer...
- Crossbar Recommendations for a 2015 Jayco 1207HD Jay Series with Factory TracksFrom the sounds of your question, it sounds like you have factory track OEM rails on the roof of your 2015 Jayco 1207UD Say Series camper. If this is the case, I recommend the following parts: - Rhino-Rack Roof Rack for Factory Tracks - 2 Vortex Aero Crossbars 54" Long # Y02-480B-NT (black) or # Y02-480-NT (silver) With these options, you receive the benefits of an extremely dynamic crossbar setup. This leads to a quieter ride and increased fuel efficiency. The quick mount legs will...
view full answer...
- Roof Rack Recommendation for Factory Tracks on ARE Camper ShellI really like the Rhino-Rack Vortex Aero crossbars for the factory truck tracks like what you have on your ARE camper shell because they can easily be removed if you ever want to take them off. There are locks for this system as well so even though it's easy to remove, you have to get past the lock first. There are a few different sizes for this setup but you will likely need the 54" Crossbar System # Y02-480B-NT or 59" Crossbar System # Y02-490B-NT. You'll want to measure the distance...
view full answer... - Roof Rack that Can Fit Tracks on Top of Lance CamperRhino Rack has aero bar roof racks that fit directly to the Lance camper shell roof tracks you have now with the part # Y02-480B-NT for a 54 inch long crossbar or part # Y02-490B-NT for 59 inch bars. This would be an easy and great option to add a roof rack to your camper shell. The aero design of this rack would also add the least amount of height to the camper roof as well.
view full answer... - Crossbar Recommendation for Factory Tracks Spaced 96" Apart on Lance 850 CamperIt sounds like you have factory tracks on your Lance 850 camper. While you are correct that those quick mount legs # RRRLT600 or the # RLTP-2 fit the tracks, we do not have any long enough crossbars to accommodate tracks that are 96" apart. the only other solution is to purchase new tracks to mount between the ones you currently have or to remove the ones you have and bring them closer together. For the solution for purchasing all new tracks with the crossbars, I recommend the Rhino-Rack...
view full answer... - Does Rhino Rack Kayak Carrier # S510 Fit Rhino Rack for Roof Tracks Y02-490B-NTYes the Rhino Rack kayak carrier part # S510 fits directly to the Rhino Rack roof rack for roof tracks # Y02-490B-NT that you also mentioned.
view full answer... - Roof Rack for 2009 Highlander Niagara with Roof Top ChannelsWe have solutions that would work but the Sportrack # SR1020 that you referenced would not fit directly to the tracks you have on your Niagara pop up. Instead the Rhino Rack part # Y02-490B-NT would be a great option that fits directly to the tracks you have. The bars of this are 59 inches long and are aero shaped.
view full answer... - Which Roof Rack Will Fit My Retrax Pro XR Tonneau Cover On My 2020 Toyota Tacoma?Yes you can certainly install a 59" crossbar setup such as Rhino-Rack Roof Rack for Factory Tracks - 2 Vortex Aero Crossbars - Black - 59" Long # Y02-490B-NT onto your RetraxPRO XR Hard Tonneau Cover - Retractable - Aluminum - Matte Black - Accessory T-Slots # RTT-80851. The mounting legs underneath the Rhino-Rack crossbars are adjustable to fit various distances, allowing for a simple install onto the hard cover on your 2020 Tacoma. The Rhino-Rack crossbars have the common top track...
view full answer... - Roof Rack that Fits Channels of 2023 Forest River IBEX 20BHSWe have just what you need with the Rhino Rack Roof Rack for Factory Tracks part # Y02-490B-NT. This is a 59 inch crossbar setup that fits directly to the channels you have on the top of your 2023 Forest River IBEX 20BHS.
view full answer...
Do you have a question about this Roof Rack?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Jameson C
Installed by:
Andrew K
Edited by:
Tyler C
Video Edited:
Jacob T
Updated by:
Wilson B
Updated by:
Alex H
Written by:
Daron K
Video by:
Jonathan Y
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Richard
12/5/2023
The racks are working great. I use it mainly for ladders and building supplies. Some of the rubber grip that popped out of the track is deformed and will no longer stay in the track. Overall satisfied with the rack.