See what our Experts say about this Inno Roof Rack

• Recommended Roof Rack For A 2016 Ford Fusion SE
  Hey Alec, For your 2016 Ford Fusion I recommend the recommend a roof rack from Inno: Inno Aero Crossbars # INXB138-145 Inno Through Feet for Aero Crossbars # INXS250 Custom Fit Kit for Inno XS200, XS250, and INSU-K5 Roof Rack Feet # INK860 As with any other roof rack option for your vehicle you will not likely be able to open the sun roof while the bars are in place, but if you did the wind/noise from the crossbars would be very annoying. This isn't an issue with the quality of the...
  view full answer...
• Recommended Roof Rack and Kayak Carrier for 2021 Hyundai Tucson with Bare Roof
  The Inno Aero Crossbar Roof Rack part # INXB138-145, part # INXS250,and part # INK680 is an excellent option for a 2021 Hyundai Tucson with bare roof. This is an aero bar system so there will be reduced wind noise and mpg affects. The extended crossbars will be great for kayaks, giving you more space and making loading much easier. In order to secure a kayak you'll still need a carrier, the etrailer J-Style Kayak Carrier part # e98878 is what I recommend. It has all the tie-downs you need...
  view full answer...
• Replacement Parts For Inno Fit Kit TR152 On a 2022 Lexus GX460
  Those parts are only available with the Fit Kit # INTR152 for your 2022 Lexus GX 460. These will attach to your Feet # INXS350 and Crossbars # INXB138-145.
  view full answer...
• Recommended Roof Rack and Kayak Carrying Option for 2020 Mazda CX-5
  Inno offers a couple different options that would work well with your CX-5. Inno might not have the brand-name recognition of Thule or Yakima, but they make an excellent product that's usually less expensive than products from the more well-known companies. For a rack that uses more aerodynamic oval profiled crossbars, you can assemble a roof rack out of the following parts: Black Aero-style crossbars, part # INXB138-145 Roof Rack Feet, part # INXS250 Vehicle Specific Clamp Kit, part...
  view full answer...
• Recommended Solution for Carrying 2 Kayaks on Roof of 2017 Hyundai Tucson
  Inno makes a great roof rack solution for your vehicle. You might be more familiar with names like Thule or Yakima, but Inno is very well known on the west coast for making high quality roof racks at reasonable prices. You can construct a roof rack using the following parts: Crossbars, item # INXB138-145 Roof Rack Feet, item # INXS250 Vehicle Specific Clamp Kit, item # INK680 The crossbars used on the rack system above would be perfectly compatible with the Rhino Rack item # S512-S512X...
  view full answer...
• Parts Needed for the Inno Roof Rack for a 2016 Toyota Highlander with Flush Mounted Rails
  Yes, you are correct. As long as your 2016 Toyota Highlander XLE has flush mounted rails that run front to back, then the 2016 Toyota Highlander Roof Rack by Inno will work to provide a roof rack for your Highlander. I have listed out the parts you need for that roof rack below. - Inno Aero Crossbars # INXB138-145 - Inno Through Feet for Aero Crossbars # INXS350 - Custom Fit Kit for Inno XS300, XS350, XS400, XS450, INTR, and INXR Roof Rack Feet # INTR153
  view full answer...
• Inno Crossbar Fit for 5-Door 2014 Ford Focus
  I'm happy to inform you that this custom fit is compatible with a 2014 5-Door Ford Focus. When pairing these with the feet and crossbars, I recommend getting the Aero Crossbars over the Square as they will cut down on wind noise and offer much more versatility with mounting options (clamps and channel-mount). We have a combo made up with the longest pair, part # INXB138-145, which I've linked for you. The combo includes the crossbars; the feet, part # INXS250; and the custom fit, part...
  view full answer...
• Recommended Roof Rack And Paddleboard Carrier For 2015 Lexus NX 300h With Naked Roof
  All three of the Inno roof racks will work well on your 2015 Lexus. The difference between the roof racks are the crossbars and feet. Our least expensive roof rack features square crossbars, while the other two roof racks have aerodynamic bars. All three roof racks have the same weight capacity at 140 lbs. Since aerodynamic crossbars will mean less wind noise and drag I recommend the NX 300h roof rack. To order this roof rack you will need part # INXB138-145, part # INXS250, and part...
  view full answer...
• 2019 Ford Fusion Roof Rack Recommendation
  We definitely have some roof rack options for your 2019 Ford Fusion but unfortunately none of them are from Rhino-Rack. I recommend using the Inno aero-style roof rack setup which includes the following: 54" and 57" Aero Crossbars - # INXB138-145 Through Feet - # INXS250 Fit Kit - # INK860 There is a square bar system from Inno but it's about the same price which is why I recommend going with the nicer aero bars. Not only do they look more sleek but they also help to cut down on wind...
  view full answer...
• What Size Crossbars Do I Need for the Thule Hullavator on My 2019 Hyundai Tucson?
  For a crossbar kit that will allow you to fit the Thule Hullavator # TH898 on you the roof of your 2019 Hyundai Tucson with factory flush rails involves the following components: - Inno Aero Crossbars - Aluminum - Black - 54" Long and 57" Long - Qty 2 # INXB138-145 - Inno Through Feet for Aero Crossbars - Naked Roofs - Qty 4 # INXS250 - Custom Fit Kit for Inno XS200, XS250, and INSUT Roof Rack Feet # INK680 With this Inno system, you will be able to use the top channels in the crossbars...
  view full answer...
• Recommended Thule Roof Rack For A Stand Up Paddleboard Carrier On A 2022 Lexus RX 350
  If you are looking for a Thule roof rack to go onto your 2022 Lexus RX 350, we definitely have a good option for you. With that being said, you will want the Thule WingBar Evo Crossbars # TH711320, Evo Flush Rail Feet # TH710601, and the Fit Kit # TH186044. This is a full set up that will give you 50" of usable space, which will be more than enough to carry an SUP or two on your roof. I too have used a lot of Thule parts over the years and really like their products. Definitely the way...
  view full answer...
• Recommended Parts Needed to Carry a 12 Jon Boat on the Roof of a 2019 Hyundai Tucson
  We do have a solution for you via installing a roof rack on your 2019 Hyundai Tucson. If your Tucson has flush mount rails that run front to back then I recommend the Thule WingBar Evo roof rack which consists of 47" # TH711220 WingBar Evo Bars, the Evo Flush Foot Pack # TH710601, and Fit Kit # TH186013. If you just have a naked roof (no rails) then I recommend the Inno Aero style roof rack which uses Crossbars # INXB138-145, Through Feet # INXS250, and Fit Kit # INK680. The Thule roof...
  view full answer...
• Recommended Roof Rack For A 2016 Ford Fusion SE
  Hey Alec, For your 2016 Ford Fusion I recommend the recommend a roof rack from Inno: Inno Aero Crossbars # INXB138-145 Inno Through Feet for Aero Crossbars # INXS250 Custom Fit Kit for Inno XS200, XS250, and INSU-K5 Roof Rack Feet # INK860 As with any other roof rack option for your vehicle you will not likely be able to open the sun roof while the bars are in place, but if you did the wind/noise from the crossbars would be very annoying. This isn't an issue with the quality of the...
  view full answer...
• Roof Rack for 2008 Land Rover Range Rover Sport With Naked Roof to Carry SUPs
  The best value for a roof rack for your 2008 Land Rover Range Rover Sport with a naked roof to carry your SUPs is going to be from Inno because it gives you a high-quality aerodynamic rack at a price that is less than other recognizable brands. The parts you need are the following: - Inno Aero Crossbars # INXB153-2 - Inno Through Feet for Aero Crossbars # INXS250 - Custom Fit Kit # INK766 Then to carry either 1 or 2 SUPs I highly recommend the Inno Locker Watersport Carrier # INXA445. The...
  view full answer...
• Recommended Roof Rack and Kayak Carrier for 2018 Honda Civic 2 Door
  For your 2018 Honda Civic 2 Door with a bare roof I recommend the Inno Aero Bar Roof Rack because it will provide you with the quietest rack available for your vehicle. This system consists of # INXB130-2 for the two 51 inch Aero Crossbars, # INXS250 for the Inno Through Feet, and # INK683 for the Custom Fit Kit. In addition to reducing noise during travel, the aero-style bars also offer a really sleek appearance and plenty of capacity to support your 2 kayaks. I have attached a short...
  view full answer...
  
• Inno Roof Rack and Yakima Kayak Carrier Fitment on a 2010 Honda Accord Crosstour
  Thanks for reaching out to verify, Frank! Yes, those parts (listed below) will fit great together and on your 2010 Honda Accord Crosstour with the naked roof. Inno Roof Rack - Aero Crossbars # INXB130-138 - Through Feet # INXS250 - Fit Kit # INK587 The Yakima Kayak Roof Rack w/ Tie-Downs # Y04083-04082 is designed to clamp around this very style of crossbar to everything will fit very neatly together!
  view full answer...
• Roof Rack Recommendation to Carry Ladders on 2015 Mazda CX-5 with Naked Roof
  Thule has a roof rack that will fit and work great for your 2015 Mazda CX-5 that has a naked roof and moonroof with the roof rack part numbers # TH711420, # TH710501, and # TH145110. This gives you an aerodynamically shaped roof rack (minimal wind noise) with plenty of capacity that's very well made and easy to install. Then for a set of load stops that fit these bars to make carrying a ladder easy you'd want the part # 753-3761. For straps then to hold the ladders to the rack the part...
  view full answer...
• Aero Bar Roof Rack Recommendation for 2011 Lincoln MKZ
  For an aero bar roof rack that is available for your 2011 Lincoln MKZ that rivals the quality of Yakima racks and is priced better I would highly recommend the Inno Aero Bar roof rack part numbers # INXB123-130, # INXS250, and # INK546. This would be your best option for a rack that's ready to go!
  view full answer...
• Best Way to Add Cargo Carrying Space on a 2016 Fiat 500X
  Unfortunately there are no trailer hitch fits for the Pop version of the 2016 Fiat 500X that you have. If you let me know what you were planning on using the hitch for I can see if we have any other solutions out there for your application.
  view full answer...
• Can I Mount the Rightline RL100D90 Next to a Ski Carrier on My 2016 Volkswagen Tiguan?
  I have a solution for you. In order to mount the Rightline Gear Car Top Duffel Bag # RL100D90 to your vehicle with crossbars, you will have to mount the bag vertically (pointing toward the front/rear of the vehicle). and use the straps to either attach to your doors or to your rails on your vehicle. This is the setup used in the video I attached to this answer. To find out whether you have enough room to use the Rightline Gear Car Top Duffel Bag # RL100D90 with a roof-mounted ski rack,...
  view full answer...
• Recommended Crossbars for a 2004 Toyota Tundra Double Cab With a Naked Roof
  For your 2004 Toyota Tundra, I recommend checking out the Inno Aero Crossbars # INXB145-2, with the Inno Through Feet for Aero Crossbars # INXS250 and the Custom Fit Kit for Inno XS200, XS250, and INSU-K5 Roof Rack Feet # INK532. This cross bar setup will work with your naked roof and provide you with 57" long crossbars with integrated top channels for mounting roof top accessories. These bars also have a maximum dynamic weight capacity of 165 lbs, so you'll have plenty of capacity for...
  view full answer...
• Recommended Inno Roof Rack For 2013 Honda Civic Coupe Naked Roof
  The custom fit kit part # INK642 that you referenced is the correct fit kit for the 2013 Honda Civic Coupe. To complete the roof rack system you will need Inno Aero Crossbars part # INXB130-138 and Inno Through feet part # INXS250. The Inno crossbars are aerodynamic to cut down on wind noise and have integrated T-slots to make mounting accessories easier. The through feet are designed so the bar sits on top of the feet and allows for bar overhang, which comes in handy if you have a water...
  view full answer...
  
• How To Carry 2 Bikes On 2019 Honda Civic Si With Spoiler and Center Exhaust
  For your 2019 Honda Civic Coupe Si or Sedan SI, you can use the Yakima FullBack 2 bike trunk rack # Y02634. However, for your car, especially if you have the Civic coupe, SI, I would really recommend looking at a roof rack instead of a trunk rack so you won't have to worry about damage to the spoiler. If your Honda Civic SI is a coupe, I recommend Inno Roof Rack part # INXB130-2 for the bars, # INXS250 for the feet and # INK683 for the fit kit. If your Honda Civic SI is a hatchback,...
  view full answer...
  
• Recommended Roof Rack and Cargo Bag for a 2019 Toyota Highlander
  I agree it can be a bit overwhelming and confusing to pick out crossbars for your vehicle if you're not familiar with what you need, but I'm here to help. If you have raised rails then I'd recommend going with the Inno Aero Crossbars # INXB130-138, with the Inno Through Feet for Aero Crossbars # INXS350 and the fit kit # INTR153. If you have a naked roof, you can use the same crossbar mentioned above, but you'll need different feet # INXS250 and a different fit kit # INK666. These crossbars...
  view full answer...
• What Inno Aero Bar Roof Rack Parts Are Needed for a 2004 Toyota Tundra
  Yes, the Inno Roof Rack part numbers # INXB153-2, # INXS250, and # INK532 have been confirmed as a fit for your 2004 Toyota Tundra so it would fit and work well for you.
  view full answer...
• Roof Rack For 2015 Ford Fusion For Kayak
  For your 2015 Ford Fusion I do recommend the Inno roof rack because it's a great value. It will perform just as well as other options, but at a lesser cost. The correct fit for your '15 Fusion is the following: - Inno Aero Crossbars # INXB130-138 - Inno Through Feet # INXS250 - Custom Fit Kit # INK860 Then for a kayak carrier that will fit the rack and has the capacity to haul your 75 lb kayak, I recommend the Swagman Exo Aero Rooftop Kayak Roof Rack # S65145. This carrier has a 100...
  view full answer...
• Roof Rack Recommendation for 2022 Chevy Equinox with Naked Roof
  For your 2022 Chevy Equinox that has a naked roof the roof rack I would recommend is the Inno Aero Bar Roof Rack part # INXB130-2, # INXS250, # IN43FR. This is a higher quality roof rack that beats it's competitors in price by quite a bit. It's still one of the nicer rack options that's going to fit well, install easy, and be quieter but it just comes in a much better price so I really like it.
  view full answer...
• Recommended Roof Rack to Fit a 2015 Honda Civic Coupe
  I have a solution for you, but the SportRack Semi-Custom Roof Rack # SR1002 is not a fit on the 2015 Honda Civic coupe. However, the Inno roof rack system for a 2015 Honda Civic that uses parts # INXB130-138, # INXS250 and # INK642 is a really well made system that won't break the bank. This roof rack gives you aero style bars that will reduce wind noise compared to a square bar or round bar, and Inno roof rack parts are backed by a lifetime limited warranty. I've linked a short review...
  view full answer...
• Roof Rack For 2017 Fiat 500X With Panoramic Sunroof
  Yes there are a few roof racks that you can use on your 2017 Fiat 500X with panoramic sunroof, however, you will likely not be able to open/use the sunroof while the roof rack is installed. If you have the factory roof rails running parallel to the car then you can use Thule WingBar Evo Crossbars 47" Long - Qty 2 # TH711200 along with Feet # TH460R and Fit Kit # THKIT4043. This is an aerodynamic crossbar that is low-profile and has less noise and vibration than other styles of crossbars....
  view full answer...
• Cargo box and Roof Rack Recommendation For 2019 Nissan Rogue
  Cargo Boxes are not technically vehicle specific, as long as you have a roof rack on the vehicle you can use a cargo box that is compatible with the bars that you have. Measure from the center of the rear cross bar to the center of the front cross bar for the cross bar spread. You also want to measure from the center of the front cross bear to the point where the roof and hatch meet. I recommend to use a box with a more versatile fit like Malone Cargo16 Rooftop Cargo Box part # MPG902...
  view full answer...
  
• What Size Crossbars do I Need for My 2016 Honda Civic?
  From the sounds of your question, you are looking for what roof rack crossbar length fits your 2016 Honda Civic. If that is your question, it truly depends on what roof rack manufacturer constructed the bars. This is because each manufacturer conducts different tests to make sure they produce the correct length for your vehicle. With that being said, one of the roof rack systems you looked at was the SportRack Semi-Custom Roof Rack # SR1010. While we do have great roof racks that fit...
  view full answer...
• Roof Rack for 2016 Lincoln MKX with Naked Roof and Panoramic Sunroof
  There is one high-quality roof rack that will work on your 2016 Lincoln MKX with a naked roof and panoramic sunroof from Inno, which consists of: - Inno Aero Crossbars # INXB138-2 - Inno Through Feet for Aero Crossbars # INXS250 - Custom Fit Kit for Inno # INK676 This roof rack uses aero crossbars that measure 3-1/8" wide x 1-1/8" tall which are the same dimensions as Thule bars such as the WingBar Evo so your Thule cargo box will fit. The fit kit does have pads to protect your the surface...
  view full answer...
  
• Are there Any Thule Crossbars for My 2013 Honda Crosstour?
  There is not a fit kit for your 2013 Crosstour because Thule does not make a set of bars compatible with your vehicle. Instead, you're limited to using either the SportRack Semi-Custom Roof Rack for Naked Roofs - Square Crossbars # SR1002, or any of the following: -Inno Aero Crossbars # INXB130-138 for a set of 51" and 54" long bars with the custom feet # INXS250, and the fit kit # INK587, -Inno Aero Crossbars # INXB123-130 for a set of 48" and 51" long bars, with the custom feet # INXS250,...
  view full answer...
• Recommended Roof Rack for 2017 Fiat 500x with Sunroof
  For your 2017 Fiat 500X, the roof rack I recommend for your vehicle is the Inno Aero Crossbars # INXB130-138, along with the Inno Through Feet # INXS250, and the Fit Kit # INK482. This combination will allow you to use your Thule accessories whether they are channel mounted or clamp on. This system comes with the integrated locking covers for increased security and has the aero bars for a quieter rack. This roof rack will give you a crossbar spread of 26 inches, so it will work with...
  view full answer...
• Recommended Roof Rack With Highest Weight Capacity For 2015 Toyota Prius
  The Inno aero roof rack that you are referring to includes InnoAero Crossbars - Aluminum - Black - 51" Long and 54" Long # INXB130-138, Inno Through Feet # INXS250, and Custom Fit Kit # INK865. This system is indeed locking; it secures the roof rack to your vehicle's roof and also secures any track-mounted accessories to the crossbars. The track-mounted accessories simply slide into the integrated T-slot track on top of the crossbars. The weight capacity for this system is 140lbs, but...
  view full answer...
• Recommended Roof Rack and Cargo Basket for a 2002 Toyota Tundra
  To add a roof rack to your 2002 Toyota Tundra's Naked Roof you will need the following parts: Inno Aero Crossbars - Aluminum - Black - 54" Long - Qty 2 item # INXB138-2 Inno Through Feet for Aero Crossbars - Naked Roofs - Qty 4 item # INXS250 Custom Fit Kit for Inno XS200, XS250, and INSU-K5 Roof Rack Feet item # INK153 This roof rack is confirmed to fit the Access Cab model of your Tundra. It has a 140 lbs weight capacity which is the highest available option for your truck. The...
  view full answer...
• Lowest Profile Roof Rack for 2022 Mazda CX-5 With Bare Roof
  The lowest-profile roof rack for your 2022 Mazda CX-5 is the flush-mounted Inno rack on your bare roof. The overall height added will be 4 inches give or take a small amount (the curves of the roof will mean this can vary). The flush-mount does not shift the mounting point, however, as the feet have to be positioned at specific points on your CX-5, per the instructions. The parts that make up the Inno rack that fit your '22 CX-5 are the following: - Inno Aero Crossbars # INXB108-115 -...
  view full answer...
• Can Roof Tracks Be Installed On a 2019 Mazda CX-5
  I do have plenty of roof rack options for a 2019 Mazda CX-5 but since your vehicle has a bare roof you will need to install a system that attaches inside the door jamb. The tracks cannot be used on the roof of a vehicle as they require drilling and are more for hard shell camper tops. The rain gutters on your CX-5 should not be modified in any way. I recommend the Inno Aero Crossbar System part # INXB130-138, part # INXS250, and part # INK497 which as mentioned will attach inside the...
  view full answer...
  
• Recommended Roof Rack for 2021 Mazda CX-5 Carbon Edition
  For your 2021 Mazda CX-5 Carbon I recommend the Inno Roof Rack consisting of the following: Inno Aero Crossbars - Aluminum - Black - 42" Long and 45" Long - Qty 2 # INXB108-115 Inno Flush Feet for Aero Crossbars - Naked Roofs - Qty 4 # INXS200 Custom Fit Kit for Inno XS200, XS250, and INSUT Roof Rack Feet # INK497 This is rated for 120 lbs and is compatible with your Rhino-Rack Ski Rack. The fit kit does allow for this roof rack to be removed as needed, but you will need to remeasure...
  view full answer...
• Will the SportRack Semi-Custom Roof Rack # SR1002 Fit a 2017 Mazda CX-5
  I do have a solution for you, but unfortunately the SportRack Semi-Custom Roof Rack # SR1002 is not compatible with your 2017 Mazda CX-5. The square bar roof rack that does fit your CX-5 with a naked roof (since that's what the SportRack option fits) is the Inno roof rack which consists of the Inno Square Crossbars # INB137, Feet # INSUT, and Fit Kit # INK497. This roof rack has a weight capacity of 120 lbs and can be shipped to Canada. I have linked a review video for you to check out.
  view full answer...
• Recommended Roof Rack and Kayak Carriers for 2020 Mazda CX-5
  The JetStream Rack from Yakima I previously recommended will be easy to remove and won't require pulling that rubber piece out of the roof gully. Once you assembly the feet and crossbars all you have to do is sit it on the roof, attach the hooks and tighten them down. You only have to do the assembly once so putting the rack on and taking it off after is just a matter of positioning it correctly and installing the DropHook system again. You need the following for this rack: -Yakima JetStream...
  view full answer...
• How to Fit Rhino-Rack Ski and Snowboard Carrier on a 2023 Mazda CX-5 Naked Roof
  To use the Rhino-Rack Ski and Snowboard Carrier # RR574 on your 2023 Mazda CX-5 we need to get you a roof rack, and for that I recommend the Inno Aero roof rack system since it has great quality and doesn't break the bank. Here are the parts you need for this: - Aero Crossbars # INXB130-138 - Through Feet # INXS250 - Fit Kit # INK497
  view full answer...
  
• Recommended Roof Rack and Kayak Carrying Option for 2020 Mazda CX-5
  Inno offers a couple different options that would work well with your CX-5. Inno might not have the brand-name recognition of Thule or Yakima, but they make an excellent product that's usually less expensive than products from the more well-known companies. For a rack that uses more aerodynamic oval profiled crossbars, you can assemble a roof rack out of the following parts: Black Aero-style crossbars, part # INXB138-145 Roof Rack Feet, part # INXS250 Vehicle Specific Clamp Kit, part...
  view full answer...
• Parts Needed to Fit Thule Square Bars on 2017 Mazda CX-5
  Yes, if you only have the rubber strip on the roof of your 2017 Mazda CX-5 then that would be considered the naked roof. The flush mount side rails actually stick up a little bit and are pretty noticeable. If you have the newer Thule SquareBar Evo crossbars that are 53" long then the following parts will give you a complete roof rack 53" SquareBar Bars - # TH712400 Evo Clamp Feet - # TH710501 Fit Kit - # TH145079 The newer SquareBar from Thule has a slot on the underside of the bar that...
  view full answer...
• Recommended Roof Rack For A 2018 Mazda CX-5
  You will not remove the plastic strips on your 2018 Mazda CX-5 when you install a roof rack that is compatible with your vehicle. Aesthetics aside, none of the roof racks I have installed on the naked roofs of my personal vehicles have ever leaked. I do like the Inno option: Inno Aero Crossbars - Aluminum - Black - 42" Long and 45" Long - Qty 2, part # INXB108-115 Inno Flush Feet for Aero Crossbars - Naked Roofs - Qty 4, part # INXS200 Custom Fit Kit for Inno XS200, XS250, and INSUT Roof...
  view full answer...
• What is Needed to Mount Inno Feet to 2019 Mazda CX-5 With Bare Roof
  For your 2019 Mazda CX-5 with a bare roof, you will also need a fit kit to mount the Inno Feet for Square Crossbars # INSUT. Fit kits are designed to conform to specific vehicles and give the feet a mounting point, which is why they are needed, and the correct kit for your '19 CX-5 is the Custom Fit Kit for Inno XS200, XS250, and INSUT Roof Rack Feet # INK497.
  view full answer...
• Recommended Roof Rack for 2017 Mazda CX-5
  I do have a solution for you. If the roof on your CX-5 has factory installed rails that run front to back, I recommend looking at the Thule Roof Rack # TH711220, # TH460R, #THKIT3160. This is a nice roof rack system with an aerodynamic profile to reduce wind noise and a weight capacity of 165 pounds. The kit will include the two 50 inch long crossbars, 2 towers with keyed locks, 4 end caps, 2 keys and all the necessary hardware for installation. If you have a roof with no rails and...
  view full answer...
• Replacement Crossbar Recommendation For An Older Thule SquareBar System Going on A 2021 Mazda CX-5
  The Thule Traverse Roof-Rack Foot Pack 754/480 has been discontinued for a bit now so they are not going to be available for your new 2021 Mazda CX-5. In addition to that, since Thule changed the way the SquareBar attaches to the new feet you'd actually have to order a new SquareBar system. The Thule SquareBar Evo Crossbars # TH712400 with the Evo Clamp Feet for Thule Crossbars # TH710501 and the Fit Kit for Thule Evo Clamp and Edge Clamp Roof Rack Feet # TH145079 is the new and improved...
  view full answer...
• Correct Inno Square Crossbar Roof Rack for a 2023 Mazda CX-5
  If you don't have flush side rails on your 2023 Mazda CX-5 then in order to add a Inno Square Crossbar Roof Rack you'll need part # INB137, part # INSUT, and part # INK497. If you do have flush side rails then you'll want to use the Inno Square Crossbar Roof Rack part # INB117, part # INXP, and part # IN53FR. These are both great systems, it's just a matter of choosing the correct one based on what type of roof you have.
  view full answer...
• Will Malone AirFlow2 Roof Rack fit 2018 Mazda CX-5?
  The Malone AirFlow2 Roof Rack # MPG215 will only fit a 2018 Mazda CX-5 that has raised side rails; from your photo it does not appear your CX-5 has those, unless you were talking about those side rails when you mentioned you have already installed the side bar. Otherwise, if you do have a naked roof, the most economical roof rack option for your '18 CX-5 is from Inno and consists of the Square Crossbars # INB137, Feet for Crossbars # INSUT and Custom Fit Kit # INK497.
  view full answer...
  
• Solution For Carrying 3 Bikes On A 2016 Mazda CX-5 With 1-1/4" Hitch Receiver
  When using a 1-1/4" trailer hitch receiver, you are limited to 2 bikes and cannot carry 3 bikes; this is because class 1 receivers are not designed to hold that much weight. For a 2-bike carrier you could go with the Saris SuperClamp EX Bike Rack 1-1/4" and 2" Hitches # SA4025F. This has a weight capacity of 60lbs per bike. Then if you have a 3rd bike that you need to carry you can add a roof-mounted bike rack such as Swagman Upright Bike Rack # S64720. For this you will need a roof rack...
  view full answer...
• Roof Rack Recommendation for 2021 Mazda CX-5 for etrailer Kayak Carrier
  Hey Jeff, for your 2021 Mazda CX-5 I would go with a longer crossbar roof rack like the Inno part # IN95PR which is a confirmed fit and also has bars that are 54 inches long. Your etrailer kayak carrier part # e98878 would fit and work great on this roof rack.
  view full answer...
• Roof Rack for 2024 Mazda CX-5 With Naked Roof
  Hey Kody! Thanks for the pictures. You do not have the flush rails so this is considered a naked roof with no existing rails or crossbars. Although the # IN74WR you referenced is designed for fixed mounting points it will not fit the ones on your 2024 Mazda CX-5. If you want an Inno Aero rack the only option is the # IN89BR or # IN95PR that use their fit kit hooks. If you would like a roof rack that attaches to the fixed mounting points you can use the Rhino-Rack Vortex Roof Rack for...
  view full answer...
• Roof Rack for 2024 Mazda CX-5 with Naked Roof
  Hey Kody, thank you for the picture of your roof setup. Based on seeing that you would need a naked roof style roof rack from Inno which we have with the part # IN95PR. It is odd that you have what looks like factory fixed points but that type of fixed point is not one we have a roof rack for.
  view full answer...

Do you have a question about this Roof Rack?