Cargo box and Roof Rack Recommendation For 2019 Nissan Rogue

Question

Question:

Who makes a cargo box for a 2019 nissan rouge.

asked by: Chris H

1

Helpful Expert Reply:

Cargo Boxes are not technically vehicle specific, as long as you have a roof rack on the vehicle you can use a cargo box that is compatible with the bars that you have. Measure from the center of the rear cross bar to the center of the front cross bar for the cross bar spread. You also want to measure from the center of the front cross bear to the point where the roof and hatch meet.

I recommend to use a box with a more versatile fit like Malone Cargo16 Rooftop Cargo Box part # MPG902 which fits cross bar spreads between 25" to 40". It fits round, square, aero, elliptical, and factory crossbars and provides 16 cubic square feet of space. You will also want to measure for hatchback clearance by measuring from the center of your rear cross bar to the line where the roof and hatch meet. That measurement needs to at least be 16" for hatch clearance.

If you do not have a roof rack and have raised roof rails, I recommend Inno Aero Crossbars part # INXB130-2 with the feet part # INXS150. If you do not have raised rails, I recommend the same bars with the feet part # INXS250 and fit kit part # INK466. Both of these roof rack set ups are aerodynamic bars that are designed to cut down on wind noise with a built-in T-slot for mounting accessories.

expert reply by: Heather A

1

click to enlarge

Answer 1

I understand that you want the best roof rack for your money. I recommend the Inno Aero Crossbars part #INXB123-130 and feet part #INXS150. The Inno Aero Crossbars are very comparable to the quality of other more well known brands out there. They are…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 6

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 7

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

Hey Melanie. The reason you can't find a replacement for your GE ARC15AACBL2 15,000 btu air conditioner is because they phased them out. In 2025 all RV AC systems had to change over to a new coolant called R32. This was a EPA mandated decision.…

view full answer...

Answer 10

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 11

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 12

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Cargo box and Roof Rack Recommendation For 2019 Nissan Rogue

Products Featured in This Question

Featured Help Information

Miscellaneous Media

Continue Researching