Roof Rack Recommendation to Carry Ladders on 2015 Mazda CX-5 with Naked Roof

Question

Question:

So roughly 600 dollars ? Is there a cheaoer way ?

asked by: Eric C

1

Helpful Expert Reply:

Thule has a roof rack that will fit and work great for your 2015 Mazda CX-5 that has a naked roof and moonroof with the roof rack part numbers # TH711420, # TH710501, and # TH145110. This gives you an aerodynamically shaped roof rack (minimal wind noise) with plenty of capacity that's very well made and easy to install.

Then for a set of load stops that fit these bars to make carrying a ladder easy you'd want the part # 753-3761. For straps then to hold the ladders to the rack the part # IMF12636 would be a great option as well and you'd be set.

expert reply by: Jameson C

1

Eric C.

10/9/2019

So roughly 600 dollars ? Is there a cheaoer way ?

Reply

Jameson C.

10/9/2019

We do have more economically priced options that are still really solid like the Inno roof rack part # INXB138-2, # INXS250, # INK758. Then for straps the part # 753-3761 would work great too.

Reply

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

If your 2016 Mazda CX-5 was made on May, 16th 2016 then you have a 2016.5 mid-year model as the cutoff date for prior mid-year models was April 1st, 2016. However, none of that matters when choosing a trailer hitch for your CX-5 as the Curt Trailer…

view full answer...

Answer 3

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 4

Hey Fernando, so our best option would be the version of the same Timbren Axle Less kit but it was designed for off road tires part #T99GR. The max tire size this works with is 35x12.5-20 instead. Only other difference is that it has a 4 inch lift…

view full answer...

Answer 5

Thank you for the information! It sounds like your 2020 Toyota 4Runner TRD Pro has the raised rails and OEM crossbar setup that we'd find on the standard 2020 Toyota 4Runner. This has very low clearance under the factory crossbars so it's…

view full answer...

Answer 6

You can definitely fit the Thule Force XT XL #TH6358B on your 2019 Toyota 4Runner with enough hatch clearance, but you'll need to install an aftermarket roof rack to accomplish this because the OEM roof rack on your 4Runner sits too close to the…

view full answer...

Answer 7

For your Thule WingBar Evo Crossbars, like #TH711420, you can use the Thule load-stops 314! Alternatively, you could also use the: -Load Stops for Yakima HD Bar, JetStream, FlushBar, and RailBar Crossbars #Y01161, or the, -Load Stops for Rhino-Rack…

view full answer...

Answer 8

The Malone Universal Crossbar System #MPG201 is a more economical choice but it still does a good job. The design and quality of Thule's system is why they have such a large difference in price. Whether you go with the Thule Crossroads system…

view full answer...

Answer 9

I personally prefer the Thule WingBar Evo roof rack for your 2024 Kia Telluride. I prefer this system as it uses a 2 piece seal on the top channel which allows you to easily slide in your roof mounted channel accessories without requiring removal and…

view full answer...

Roof Rack Recommendation to Carry Ladders on 2015 Mazda CX-5 with Naked Roof

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching