See what our Experts say about this Yakima Roof Rack

• How to Carry SUP and SkyBox 21 on Roof of 2006 Land Rover LR3
  Could you let me know if your Land Rover LR3 has factory installed tracks that run from the front to back or if the OEM roof rack is more of a raised type? I tried doing some research but was having trouble finding anything that looked like it was an actually OEM roof rack. If you could send me some pictures of your roof rack system that would help me know what you have.
  view full answer...
  
• Recommended Roof Rack for Using Two Hullavators on a 2024 Ford Bronco Hard Top
  Hey Tina! Not sure what roof rack setup you were using on your Jeep but I checked with Thule and they do not have one that will work with a Hullavator item # TH898 on a 2024 Bronco. To mount and use two Hullavator item # TH898 on a 2024 Ford Bronco 4 door hard top with factory raised roof rails you will need the following parts: TimberLine Towers for Yakima Crossbars item # Y33TR 70" Long - Yakima JetStream Crossbars - Aluminum - Black item # Y00427 The 70" bars are the next size up...
  view full answer...
• Low Profile Roof Rack and Cargo Box to Carry Skis on a 2018 Subaru Outback Wagon
  I went out to our warehouse to measure a lot of the kits available to you. Since the sizing is standardized and your 2018 Subaru Outback Wagon has fixed mounting points, you can predict the size of the rack overall pretty easily. The lowest profile kit is the Yakima JetStream, standing at 4-1/2 inches tall. You will need the same mounting kit regardless of what length bar, which consists of: - Yakima SkyLine Towers, part # Y53TR - Yakima LandingPad 15, part # Y00241 What's nice is...
  view full answer...
• Will I Be Able to Use the Thule Hullavator in the Channels of Rhino-Rack Vortex Aero Crossbars?
  To address your question - yes. The top channels in the Vortex Aero Crossbars in the # Y02-490B are the same dimensions as the Thule channels like in the Thule WingBar Evo Crossbars # TH711420. However, when it comes to finding the fit required for the Thule Hullavator # TH898 on a camper shell, it is a bit complicated. The reason why is because in order for the Hullavator to function in the "down" position, it requires at least 4 inches of crossbar clearance past the feet. In addition...
  view full answer...
• Roof Rack And Bed Cover Recommendation For 2024 Ram 2500 Big Horn Crew Cab
  Hello Nancy, thanks for reaching out. We do have roof rack options for your 2024 Ram 2500 big horn crew cab, but sadly we do not have a fit for the Thule wingbars, so you will need to go with something different. For that I recommend going with a Yakima JetStream roof rack. The JetStream aero bars will work great with your Hullavator so here is what I recommend: - BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 # Y28TR - BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers...
  view full answer...
• Easily Loading and Carrying 2 Kayaks on a 2017 GMC Denali XL
  A roof rack is required first and if you are looking to ease the loading, a lift assist would be important too. The Yukon XL roof weight limit is 150 pounds so that is important in selecting rails, loading 2 kayaks, and their carriers. Yakima makes a solid roof rack option with their 66" roof rack system including parts # Y00410, # Y53TR, # Y03536, # Y00243 A side loading kayak carrier such as the Thule Hullavator # TH898 would help you a great deal loading kayaks. The video below...
  view full answer...
• Roof Rack Options For Carrying The Thule Hullavator On A 2022 Chevy Tahoe
  Hi Kristen! The Thule Hullavator requires anywhere from 4 to 8 inches of overhang past the tower to make sure it will not come in contact with your 2022 Chevy Tahoe. You didn't mention if you were going to running just one or one on each side, so that is definitely something to take into account. That said, these are going to be your two best options: Aero Bar Option: Yakima JetStream Crossbars - Aluminum - Black - 70" Long - Qty 2 # Y00427 SightLine Towers for Yakima Crossbars - Flush...
  view full answer...
• Recommended Crossbars for Yakima Top Tracks On an A.R.E Camper Shell CX Series
  The Thule TracRac CapRac Ladder Rack for Camper Shell/Truck Cap # TH29200XT is not actually meant to be installed into top tracks. This crossbar system is actually meant to be installed in fixed points on your camper shell so it's not going to work with your Yakima tracks. Yakima does offer a complete system - # Y47CV which includes everything, but since you already have the tracks you'd just need the crossbars # Y00427, the landing pad # Y00221, and the towers # Y53TR. These bars and...
  view full answer...
• Converting RetraxONE MX Tonneau Cover on a 2021 Ford F-150 5-1/2' Bed To Add Crossbars Above Bed
  I have a couple options for your Carolyn. The first is to replace your current side rails with the XR Rails # RTT-82381 on the Cover # RTX37VR so you will have the T-Slots. Other wise using a reack like the Adarac # A54KG would be an option as this places the rails about half way up your window and attaches to the stake bed pockets. If you go the route of the T-Slots you will want the Yakima Crossbars # Y00427, Towers # Y53TR and 2 sets of the Landing Pads # Y00221. For your keys you...
  view full answer...
• 2019 Ram 1500 Fitment for Yakima HD Tracks and Tonneau Cover
  As long as you can fit the 2" wide Yakima 60" HD Tracks # Y74MR so you have no less than 1/8" overhanging the outside of your truck bed side (see attached) you're good to go. This then allows you to use 2 sets of the Landing Pad 26 # Y75ZR and SkyLine Towers # Y53TR for a base system. The 66" Round Crossbars # Y00410 might work but I'm not sure if you'll have the clearance for that since I'm not sure where the Yakima tracks will sit. If they truly can sit in the middle of your rails...
  view full answer...
  
• Will Rhino-Rack Crossbars Fit On Yakima BaseLine Towers?
  The top channel on most crossbars like the Rhino-Rack and Yakima are similar but you should never mix and match towers and crossbars between different manufacturers. Their components are designed to work specifically with each other and your Yakima towers may not work properly with the Rhino-Rack crossbars. Instead you will want to stay with the Yakima crossbars from the list below to ensure they fit together properly and you have a manufacturer who will stand behind the warranty for the...
  view full answer...
• Will the Truck Hero Elevate Rack System Work With Yakima Roof Rack
  Yes, the TS (T-Slot) Rails for Truck Hero Elevate Rack System part # TH85FR is a universal track system that works with most inside the bed rail mounted tonneau covers. The tracks will then accept pretty much any track mounted accessory. In order to add a Yakima system you would need the following: SkyLine Towers for Yakima Crossbars part # Y53TR Landing Pad 1 for Yakima Control Towers part # Y00221 (2) Yakima JetStream Crossbars part # Y00427
  view full answer...
• Are Rhino-Rack and Yakima Lock Cores Interchangeable for a 2013 Ram 2500
  The Rhino-Rack key and lock systems are not interchangeable with the Yakima SKS lock systems. I noticed you are looking at # Y02-500B which mounts in tracks. The tracks would have to be installed by drilling into the vehicle roof. If you want to avoid that and still have a Yakima rack you can look at other roof rack options for your 2013 Ram 2500. Provided that the truck has the Crew Cab you can use the following Yakima roof rack parts: JetStream Bars # Y00427 or CoreBars # Y00423 BaseLine...
  view full answer...
• Recommended Thule Aero Style Bar for Lengths Longer than 60 Inch WingBar Evo for Subaru Outback
  Thule WingBar Evo Crossbars do not come in lengths beyond 60 inches. To get longer bars that are compatible with your Thule feet you will need to use their ProBar. The Thule ProBar Evo Crossbars - Aluminum - 69" Long - Qty 2 # TH713600 can be cut to your custom length as the channels run the entire length of the bars. They still have an aero style with a top channel but they also have a rear channel and bottom channel that span the entire length to give you more mounting options. These...
  view full answer...
  
• Why are the Malone SteelTop # MPG203 Not Confirmed to Fit My 2020 Toyota 4Runner with Raised Rails?
  I have a fitment answer for you. The reason why the Malone SteelTop Roof Rack - Square Crossbars - Raised, Factory Side Rails - Steel - 65" Long # MPG203 is not listed as a confirmed fit for your vehicle is because the 65" length of the crossbars are deemed far too long for your 2020 Toyota 4Runner Limited with raised factory rails. This is why the SteelTop 50" # MPG201 and SteelTop 58" # MPG202 are confirmed fits. You are right that the towers # MAL25YR will fit your vehicle. Also, another...
  view full answer...
• Parts Needed To Mount Rhino Rack Awning RR33200 To Yakima SkyLine Towers
  Yes, I definitely recommend getting new crossbars with a top channel. The good news is you can use the feet you already have. It appears you have the Yakima SkyLine Towers # Y53TR. So the 70" Jetstream bars # Y00427 will be all you need to mount your Rhino Rack # RR33200 awning.
  view full answer...
  
• Is thule Hullavator Compatible with Yakima JetStream Bars for SNUGTOP Cap on 2018 Toyota Tacoma
  The Thule Hullavator Pro # TH898 is compatible with the Yakima JetStream bars as long as they stick out past the side of your SNUGTOP truck cap 4" - 8" so that it doesn't make contact with your truck cap (see attached photo). If you are just getting the Yakima tracks on your SNUGTOP cap then you also need 2 sets of the Landing Pad 1 # Y00221, Yakima SkyLine Towers # Y53TR, and a set of the JetStream bars. The JetStream bar sets are available in the following colors and lengths: Black...
  view full answer...
  
• Roof Rack and Kayak Carrier Recommendation for Leer Camper Shell with Tracks on a Ford F-150
  I have what you need! Even though we have amazing options for installing a complete roof rack system on your Ford F-150 with a Leer camper shell, installing the WingBar Evo Crossbars onto a track system is a complicated process. This is because with the WingBar Evo crossbars, they come with bottom channels that do not extend the entire length of the bottom of the crossbar. With that being the case, there is no way to fully determine what WingBar Evo crossbars you need unless we have the...
  view full answer...
• Parts Needed to Install the PlusNut Hardware for Yakima Roof Racks on a Fiberglass Roof
  The Replacement PlusNut Hardware Kit for Yakima Roof Rack Tracks # Y8880039 is the replacement hardware for the Yakima 42" Tracks for Roof Racks # Y01126 or the Yakima 54" Tracks for Roof Racks # Y01127 both these tracks include the PlusNut hardware. Since you have a fiberglass roof you will also need to get the Replacement Capnuts, Washers and Bolts # Y8810155 which is needed when installing on a fiberglass roof. To have a complete roof rack you would also need to pick up the Landing...
  view full answer...
• Yakima Towers Needed to Mount to Landing Pad 1 on Track System
  It looks like you have the Yakima Landing Pad 1 for Yakima Control Towers # Y00221 on your A.R.E. Canopy, so I recommend using the Skyline Towers for Yakima Crossbars # Y53TR. These towers will allow you to choose between the Jetstream # Y00426 (60" long) / # Y00427 (70" long), the Yakima CoreBar # Y00422 (60" long)/ # Y00423 or use Round bars like the Yakima # Y00410 with the adapter # Y03536. These towers are not compatible with square bars that you had asked about in a previous question. If...
  view full answer...
  
• Can I Mount 70-Inch JetStream Crossbars with a Hullavator and Cargo Box on My 2022 Subaru Outback?
  Technically, it is possible to do this on your 2022 Subaru Outback Wilderness. However, the only concern with this setup is that the Yakima JetStream Crossbars - 70" # Y00427 are such long crossbars that extend past the feet on your vehicle. This may not only be illegal, it can be dangerous. We do not recommend doing this setup. I attached a video that shows just how far these crossbars protrude from a similar-sized vehicle. If you were to mount the crossbars, the compatible feet would...
  view full answer...
• How To Install Yakima LockNLoad Over Truck Bed with Tonneau Cover
  In order to install the Yakima LockNLoad Platform Roof Tray above a tonneau cover on a truck bed you will need to install a set of tracks alongside the bed rails along with a crossbar system. The crossbar system is needed because the tray is not wide enough to reach just the mounting feet on the tracks. I have attached the needed parts below: Yakima JetStream Crossbars part # Y00427 Yakima Tracks for Roof Racks part # Y01135 Landing Pad Yakima Control Towers part # Y00221 (2) SkyLine Towers...
  view full answer...
• What Rack is Needed to Fit Two Thule Hullavators on a 2020 Ford Expedition?
  Mounting two Hullavators # TH898 requires 57 inches of crossbar length (inside of the mounting points) and a minimum of four inches on both ends outside of the feet to operate. With that being said, you will need crossbars with a minimum length of 65 inches. The Yakima JetStream crossbars 70-inches # Y00427 will do the trick. The towers you need are the TimberLine Towers for Yakima Crossbars - Raised, Factory Side Rails # Y33TR. However, I called my contact with Thule and he strongly...
  view full answer...
• Best Roof Rack System for 2001 Ford E350 Van
  The gutter mounts we have are actually really sturdy if you get the right ones and install them right. Technically, you should have more weight capacity off the gutter mounts since the weight is distributed vertically through the gutters vs racks bolted onto your fiberglass roof. A good system for your 2001 Ford E350 Van is the Rhino Rack system with Square Crossbars # RB1800B-2 and Gutter Feet # RL150S10. You can switch the square crossbars for aero ones with 71" Vortex Aero Crossbars...
  view full answer...
• Recommended Fairing for Rola Roof rack on a 2009 Honda Accord Sedan
  Yes! Out of the variety of fairings that we have to offer I recommend the 40" long Inno Fairing # INA261 because it will fit perfectly with the 38" long Rola Sport Series Roof Rack # 59757 for your 2009 Honda Accord. If you let me know what you are wanting to use the roof rack for I can make additional recommendations for you. I have also attached an installation video and a picture of this roof rack on a 2009 Accord Sedan that you can reference.
  view full answer...
  
• Roof Rack and Ski Carrier to Fit 2019 Hyundai Santa Fe with Naked Roof
  Yakima has a really great roof rack for your 2019 Hyundai Santa Fe with a naked roof with the Baseline JetStream bar rack part numbers # Y28TR, # Y06151, # Y06154, and # Y00425 (see attached picture). This will give you an extremely high quality roof rack that has aero bars which will give you minimal wind noise. Then for a ski rack we have the FatCat EVO part # Y03096 which will hold 6 skis or part # Y03095 for up to 4. I attached a review video for this carrier for you to check out as well.
  view full answer...
  
• Recommended Roof Rack and Bike Rack for a 2016 Lexus GSF
  The best option to transport a bike with your 2016 Lexus GSF is going to be to install a roof rack and attach a bike rack. The trunk mounted ones like item # SA805BL have mixed results and won't work with cars with spoilers. It doesn't look like your Lexus has any rails so to add a roof rack you will need the following parts: Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2 item # Y00425 BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR BaseClip...
  view full answer...
• How Can I Tell if I have Fixed Mounting Points on My 2015 Mazda CX-5 for a Crossbar System?
  According to the specs I have, you may have fixed mounting points on those rubber strips on your 2015 Mazda CX-5. The way you can tell is if there is a small removable tab on those rails that cover the holes. I went ahead and attached a video of a 2015 Mazda CX-5 with fixed mounting points to give you perspective about what to look for. If you determine that you have fixed mounting points, I recommend the following setup: - Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 46" #...
  view full answer...
• Will the Thule Force XT L Fit My 2020 BMW X5?
  Yes, you will be able to fit the Thule Force XT L # TH6357B on your 2020 BMW X5's roof. Not only do you have enough roof for the required crossbar spread of 23-5/8 - 33 inches, you will also be able to mount the box to your roof and fully open your rear hatch. If you are wanting to go bigger, the Thule Force XT XL # TH6358B and XXL # TH6359B will fit as well. As far as mounting, you will need a crossbar system in order to secure the Force XT XXL to your roof. The setup you need depends...
  view full answer...
• Will a Yakima Roof Rack System Fit My 2020 Toyota Highlander LE?
  I confirmed with Yakima that mounting points that are on your bare roof of your 2020 Toyota Highlander will fit a roof rack system. After you pop off the tab that covers the mounting points, there is a screw that you will use to attach a roof rack system. I went ahead and attached a video that shows how you would attach a Yakima roof rack system on the 2020 Toyota Highlander. For the parts you need for that setup, you will need the following parts: - Yakima JetStream Crossbars - Aluminum...
  view full answer...
• Roof Rack Fit on 2012 Toyota Venza With Panoramic Sunroof
  There is one roof rack that is a confirmed fit for your 2012 Toyota Venza with a panoramic sunroof, though the sunroof should not be opened with the rack on. There isn't a roof rack available for your Venza that is going to allow normal use of the sunroof when the rack is on, but you can remove the rack if you like when you aren't using it in order to utilize the sunroof. The roof rack that fits your '12 Venza with a panoramic roof is an exceptionally nice one from Yakima, and consists...
  view full answer...
• Recommended Roof Rack for Fiat 500x With Panoramic Glass Sunroof
  There is a roof rack that will fit your 2016 Fiat 500X that has the panoramic sunroof, the Inno Aero. This rack is made up of Aero Crossbars # INXB100-108, Flush Feet for Aero Crossbars # INXS200, and Custom Fit Kit # INK482. This rack has a 100 lbs weight capacity though I do recommend checking your Fiat's manual to confirm what the actual capacity is. The aero crossbars are going to give you a quiet ride and they also have integrated T-slots so you can carry accessories that way. I've...
  view full answer...
  
• Roof Rack and Board Carrier Recommendation for 2016 Toyota Prius V with Glass Roof
  For your 2016 Toyota Prius V you will need to install a roof rack to carry the boards you mentioned. Unfortunately only Yakima makes roof racks for your vehicle and they aren't exactly super cheap. So for that you would want the Yakima CoreBar part numbers # Y00425, # Y28TR, # Y06117, # Y06174. Which with that you'd be able to use the LockRack kpart # LR59FR that you referenced. This will attach to the crossbar by the top channel.
  view full answer...
• Compatibility of 3 Bike Rack on 2015 Toyota Prius
  The Reese Q-Slot Platform-Style 2 Bike Rack is a fit for your 2015 Prius but has been discontinued. If you already have the rack it will work very well for you. I recommend using the included pin and clip for a secure fit in the hitch and then using a cable lock like # e98891 to secure your bikes to the rack. The 2 inch receiver only Reese Q-Slot Platform-Style 2 Bike and 4 Bike Rack PS63138 (also discontinued) was a 2 or 4 bike carrier, but would NOT work on your 2015 Toyota Prius...
  view full answer...
• Is There A Trailer Hitch Available For A 2019 Honda Civic Sedan With A Center Exhaust
  Hi Hamza, Honda Civic models with a center exhaust unfortunately prevent the installation of a trailer hitch so the only way to haul your bike(s) would be to use a trunk mounted bike rack or roof rack mounted bike rack. If you'd prefer a trunk mounted bike rack then I recommend the Yakima FullBack 2 Bike Rack # Y02634. If you want to go with a roof rack mounted back rack and don't currently have a roof rack then you'll need the following components: Yakima JetStream Crossbars # Y00425 BaseLine...
  view full answer...
• Roof Rack Recommendation for 2018 Toyota Camry Hybrid with Sun Roof
  For your 2018 Toyota Camry Yakima has the CoreBar roof rack with aero shaped crossbars part numbers # Y00421, # Y28TR, and # Y06192 that can be used on vehicles with sun roofs. But Yakima states to keep it closed when the rack is installed. For a carrier to carry your two kayaks we have the Thule Stacker part # TH830 then that would work well. This rack will hold the kayaks on end. See install video I attached.
  view full answer...
• Square Bar Roof Rack that Fits 2020 Ram 1500 Quad Cab
  Thule offers a square bar roof rack that fits your 2020 Ram 1500 quad cab with the part # TH712500, # TH710501, and # TH145199. Then for a square bar roof rack the Thule Portage part # TH819 would work great.
  view full answer...
• Roof Rack for Carrying a Canoe/Kayak on a 2014 Subaru Impreza with a Naked Roof
  While we do have roof racks for your 2014 Subaru Impreza, the (discontinued) Custom Fit Kit WB-K473 you referenced is for various years and models of GM pickups and there isn't a Whispbar roof rack currently in production that fits your vehicle. If you like the higher quality of a Whispbar product then you'll want to go with a Yakima roof rack as they actually manufacture the Whispbar brand. From what you were looking at I'm guessing you have a Sedan that isn't the WRX. For this you'll...
  view full answer...
• Roof Rack Options that Fit 2012 Chrysler 300
  What install video are you referring to? Or what part number?
  view full answer...
• Recommended Rhino Rack Roof Rack With Bike Rack And Surfboard Carrier For 2015 Ford F-150
  For your 2015 Ford F-150 SuperCrew Cab, I recommend the Rhino Rack Roof Rack consisting of: Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 59" Long - Qty 2, # RRVA150B-2 Rhino-Rack 2500 Series Legs for Vortex Aero Crossbars - Qty 4 # RRRLKVA Custom DK Fit Kit for Rhino-Rack 2500 Series Roof Rack Legs - Naked Roof # DK427 The custom fit kit is designed to specifically fit your vehicle curves and prevent marring and scratches as you mentioned. This kit is rated to carry 165 lbs....
  view full answer...
• Can Yakima Roof Rack From 2000 Ford F250 Be Used On A 2025 Ford F350?
  Hello Lori, thanks for reaching out. You may be able to re use certain components from your old Yakima roof rack, but I would need to know specifically what parts you have in order to say for sure. If you have the Yakima BaseLine towers like part # Y28TR, those could be used on the 2025 F350, you would just need a new fit kit # Y06185. You might be able to re use you crossbars but again it depends what you have. Yakima recommends a 58" or 60" crossbar for the 2025 F350. If you can tell...
  view full answer...
• Recommended Spacing for Yakima Q7 Clip on 2015 Chevrolet 2500HD Double Cab with Yakima Cargo Basket
  The best solution for you if you already have the Loadwarrior is to purchase the extension # Y07074. If you haven't already settled on a roof rack then I would instead recommend the MegaWarrior # Y07080. This will save you a little bit of money compared to the LoadWarrior plus extension # Y07070-74 and fit your roof rack crossbar spread of 33 inches great. I cannot recommend you move the placement of your Yakima Q clips for two reasons. The clamps will not fit properly on the roof and...
  view full answer...
• Roof Rack and Cargo Box Recommendation for 2017 Honda Accord Sedan
  The Yakima roof rack you referenced part numbers # Y00408, # Y28TR, # Y03536, and # Y06148 is a confirmed fit for your 2017 Honda Accord sedan and would be an excellent option for carrying a roof cargo box. Then for a cargo box the Thule Force part # TH6357B would fit this rack and work great. I attached a review video for this box installed on a similar sized vehicle as your Accord sedan. I really like the Thule roof racks and cargo baskets as they are very well made, easy to use, and...
  view full answer...
• Recommended Roof Rack for a 2022 Honda Insight
  Hey Andy! The 50" crossbars on the Yakima BaseLine Roof Rack Kit item # Y88UB can be swapped out but the next largest size is the 60" Long item # Y00429 so I do not think that's going to be a viable option. By law the crossbars are not supposed to stick out past the rear view mirrors. If you want to pursue this option you'll need the following parts: BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item...
  view full answer...
• Parts Needed to Carry 3 Bikes or 3 Longboard Surfboards with a 2018 Honda Civic
  To transport the 3 longboards on the roof of your 2018 Honda Civic I recommend going with the Yakima JetStream crossbars system but with longer bars to accommodate all of your boards. Since the max amount of boards you can stack on a carrier is 2 we have to make sure there is enough room to place the longboards side by side. For a roof rack use the following: 60" JetStream Crossbars # Y00426 BaseLine Towers - # Y28TR Fit Kit - # Y06182 Fit Kit - # Y06183 Then for carriers I recommend...
  view full answer...
• Recommendation for Transporting 5 Bikes on a 2019 Ford Fiesta Hatchback
  The best route is to mount your 2 adult bikes to a trunk bike rack and mount the 3 children's bikes onto the roof of your 2019 Ford Fiesta hatchback. For the trunk rack, I recommend going with the Saris Bones 2 # SA805BL. The Bones 2 comes with a 35 pound per-bike weight capacity and has anti-sway cradles to eliminate movement during transport. It is important to note that if you have women's-style frames or step-thru adult frames, you need to use a bike frame adapter bar # 64005 for those...
  view full answer...
• Recommended Yakima Roof Rack for My 2010 Hyundai Genesis Coupe
  While we do have a great Yakima crossbar system that is confirmed to fit your 2010 Hyundai Genesis Coupe, Rhino-Rack does not have a roof rack option that fits your vehicle. With that being said, I saw that you were looking at the Yakima round crossbar system that includes the 58" Crossbars # Y00409. In order to have a complete setup with these crossbars that fit your roof, you also need the following parts: - RoundBar End Caps # Y8007026 - BaseLine Towers # Y28TR - RoundBar SL Adapters...
  view full answer...
• How to Tell if Thule Hullavator Kayak Carrier Will Fit on a Tesla Model 3
  Both the current Hullavator Pro # TH898 and the older model, part 897XT that you have, require the crossbars to overhang the feet of the roof rack by 4" - 8" for their to be enough clearance to lower the carrier without making contact with any given vehicle. If you're Tesla Model 3 crossbars have a T-Slot, you still have the T-Slot mounting hardware, and the crossbars can achieve an overhang then you'll be good to go. The nice thing is that you already have this discontinued carrier so...
  view full answer...
• Can Yakima Roof Rack From 2000 Ford F250 Be Used On A 2025 Ford F350?
  Hello Lori, thanks for reaching out. You may be able to re use certain components from your old Yakima roof rack, but I would need to know specifically what parts you have in order to say for sure. If you have the Yakima BaseLine towers like part # Y28TR, those could be used on the 2025 F350, you would just need a new fit kit # Y06185. You might be able to re use you crossbars but again it depends what you have. Yakima recommends a 58" or 60" crossbar for the 2025 F350. If you can tell...
  view full answer...
• Recommended Yakima Roof Rack for a 2024 Ford F-250 Crew Cab
  To add a Yakima roof rack to your 2024 Ford F-250 Crew Cab you will need the following parts: Yakima JetStream Crossbars - Aluminum - Black - 60" Long - Qty 2 item # Y00426 BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 4 item # Y06185
  view full answer...
• Can Two Thule Hullavator Kayak Carriers Be Used On A Thule TracRac SR Ladder Rack
  Yes, you can use two of the Thule Hullavator Pro Kayak Roof Rack and Lift Assist # TH898 on the Thule TracRac SR. It has plenty of capacity and space for both to fit, you'll just need to place the towers so that the crossbars are spaced 24" apart. For your 2022 Ford F-250 with a 6-3/4' bed you'll need part # TH43003XT-785 for the TracRac. The Thule Hullavator requires that the roof of the vehicle can hold at least 130lbs, but you'll be splitting this with the ladder rack. I'd just check...
  view full answer...
• Can I Reuse Yakima Q Towers for 2021 Ford F-250
  In 2016, Yakima phased out their Q-Towers and upgraded to their new BaseLine system. That means for vehicles that are model year 2016 or newer, there are no confirmed Q-clip fits for them so we need to get you a new roof rack for your 2021 Ford F-250. If you want to reuse your round bars to make a roof rack on your F-250 Crew Cab, you can do so with a new BaseLine system. That consists of BaseLine Towers # Y28TR, a RoundBar Adapter # Y03536, and BaseClip Fit Kit # Y06185.
  view full answer...
• Roof Rack Recommendatio nfor 2018 Ford F-250 Crew Cab that is Leased
  For your 2018 Ford F-250 Crew Cab the Yakima Roof Rack part numbers # Y00422, # Y28TR, and # Y06185 would be a great solution as it is a confirmed fit and the fact that it does not permanently modify the roof of the vehicle it is installed on. So you'd be able to take the roof off when it's time to return the lease and no one would know the difference. The aero shape of these bars also helps cut down on wind noise which is a nice feature as well. I attached an install video for thist...
  view full answer...
  
• Recommended Roof Rack and Kayak Carrier for a 2003 Toyota RAV4
  Lucky for you, Yakima does make a set of crossbars that are designed to work with vehicle's that have a bare roof like your RAV4. Check out the Yakima BaseLine FX Roof Rack for Naked Roofs # Y59UV with the BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06185. These crossbars measure 44 3/4" long, has a 165 lb dynamic weight capacity, and has an integrated top channel for roof mounted accessories. Since you also are looking for a way to transport some kayaks, I'd recommend checking...
  view full answer...
• Roof Rack Fit for 2016 Hyundai Elantra GT With Panoramic Sunroof
  I checked for you and there is a fit for a roof rack for your 2016 Hyundai Elantra GT with the panoramic glass roof (moonroof), which is from Yakima. I verified the fit with the manufacturer and roof rack consists of the following parts: - Yakima JetStream Crossbars # Y00425 Black - BaseLine Towers for Yakima Crossbars # Y28TR - BaseClip Fit Kit # Y06151 - BaseClip Fit Kit # Y06185 - Same Key System Lock Cores (Optional) # Y07204 This is going to give your '16 Elantra GT an easy to use,...
  view full answer...
• Solution for Carrying Multiple Bikes on Roof of 2021 Ford F250
  We absolutely have roof rack options for your 2021 Ford F250. Beginning with the roof rack, I'd recommend the Yakima CoreBar roof rack which would be assembled using these parts: • Yakima 70 inch CoreBar crossbars, part # Y00423 • Yakima BaseLine Towers, part # Y28TR • Yakima Vehicle-Specific fit kit, part # Y06185 With a 70 inch long crossbar, you'll be able to fit up to 5 bikes on the roof, but keep in mind that the roof rack has a 165 lb weight capacity, so unless your bikes are really...
  view full answer...
• Can 70 Inch Yakima JetStream Crossbars be Cut on 2021 Ford F-350 Crew Cab
  We have a similar option for you, but you do not want to cut or trim down the Yakima JetStream Crossbars # Y00427. Instead, there are different Yakima bars that are designed to be cut down if needed, called CoreBars. The 70 inch CoreBars, and rest of the parts needed for a Yakima roof rack on your 2021 Ford F-350 Crew Cab are the following: - Yakima CoreBar Crossbars # Y00423 - BaseLine Towers for Yakima Crossbars # Y28TR - BaseClip Fit Kit # Y06185 I do recommend considering locks...
  view full answer...
• Buying a Single Yakima HD Crossbar for a 2020 Ford F-250
  While we do not have a full kit for just one crossbar for your 2020 Ford F-250, I have compiled a list of the individual part numbers that make up the Yakima HD crossbars that are compatible with the SuperCab and CrewCab. For the crossbar itself, use part # Y95FR. It's the single bar, 60" long like the full kit. For the BaseLine Towers, use part # Y62TR. There are 2 in this kit. For the HD Bar SL Adapter, use part # Y03541. This, unfortunately, does not come in a quantity of 2, so you'll...
  view full answer...
• Half Roof Rack and Ladder Rack that Fits 2023 Ford F-350
  To do a half roof rack for the roof of your 2023 Ford F-350 you'd need the following: Yakima JetStream Crossbar part # 8880650 BaseLine Towers for Yakima Crossbars part # Y62TR BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers part # Y06185 There isn't a way to do a half ladder rack so best option would be an adjustable height rack like the Yakima Overhaul # Y01151-5855 so that you can have it match the height of your roof rack and if needed you could leave off the rear (or front)...
  view full answer...
• Roof Rack for Roof Tent on a 2019 Ford F-450 Super Duty Crew Cab
  While there are no roof racks that have a weight capacity of 400 lbs, I still believe we have a solution for your 2019 Ford F-450 Super Duty Crew Cab with the Yakima HD roof rack. This consists of the HD Crossbars # Y01157, BaseLine Towers # Y28TR, HD Bar SL Adapter # Y03541, and Fit Kit # Y06185. If you are looking to use a tent that has a 400 lb weight capacity like the Yakima SkyRise HD # Y07436 then you actually just need to make sure that the roof rack is rated for 165 lbs like the...
  view full answer...
• Is There a Solution for a Roof Rack on My 2021 Ford F-250 that Doesnt Require Drilling?
  I have a great no-drilling solution for you. While the Rhino-Rack Heavy-Duty Bar Roof Rack for Camper Shells - Track Mount - Black - 59" Long # Y01-130B requires drilling, there are options for your 2021 Ford F-250 Super Duty crew cab that do not require any drilling. To go this route, you will need the following parts: - Round 66" CrossBars for Yakima Roof Rack System (QTY 2) # Y00410 - BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 # Y28TR - RoundBar SL Adapter for Yakima...
  view full answer...
• Parts Needed to Install Yakima JetStream Crossbars on 2021 Ford F-250
  To install 60 inch Yakima JetStream # Y00427 aero-style crossbars on your Ford F-250, you'll need the # Y28TR BaseLine towers and the # Y06185 vehicle-specific fit kit.
  view full answer...
• How To Transfer Crossbars From a 2019 Ford F-350 to a Leer 100RC Topper
  The track systems are all pretty much universal so you can use Yakima accessories in Thule tracks or vice versa. In regards to weight, you will be limited to 165 lbs per set of crossbars no matter which system you choose as that is all the mounting feet can handle, even with the Yakima HD Crossbars System. The vehicle's roof would likely not be able to handle much more than this either. However, you can carry up to 330 lbs total but you would need to distribute the weight so that 165 lbs...
  view full answer...
• Correct Yakima Roof Rack For 2018 Ford F-250 Crew Cab
  Okay, we can get your 2018 Ford F-250 Crew Cab set up with the right Yakima roof rack, and let's start with your first question about the correct length bars. That is determined by the manufacturer when they test fit roof racks, which is how we know the correct length of crossbar for your truck are the 70 inch long bars. In regards to a disadvantage with the clips/clamp-on versus drilled on racks, there is no disadvantage at all. Really, the only reason someone might use a rack that that...
  view full answer...
• What Roof Rack do You Recommend for a 2017 Lexus LS 460?
  I have an answer about your Rhino-Rack crossbar system. Unfortunately, I confirmed that Rhino-Rack does not make a crossbar system that is compatible to fit your 2017 Lexus LS 460. Since they do not have any roof racks for your vehicle, they do not manufacture compatible fit kits for the crossbars. Fit kits from other manufacturers do not work with Rhino-Rack crossbars because each company produces specific fitments for their feet/towers. Here at etrailer, we have never seen anyone custom...
  view full answer...
• Recommended Roof Rack for a 2018 Ford F-350 Super Duty With a Naked Roof
  For your 2018 Ford F-350 super duty with a naked roof, I recommend going with the Yakima BaseLine FX Roof Rack for Naked Roofs - JetStream Aero Crossbars # Y56UV with the fit kit # Y06185. This roof rack system will work great with your naked roof, has a maximum weight capacity of 165-lbs, and has integrated t-slots so you can use roof mounted accessories as well.
  view full answer...
• Is It Possible To Add One Crossbar To The Roof Of A 2019 Ford F-350 Super Duty
  Absolutely! As long as your 2019 Ford F-350 Super Duty is a Crew Cab or Super Cab you can use the following parts to add just one crossbar to your truck: 60" Yakima JetStream Crossbar # 8880649 2 of the Replacement BaseLine Tower for Yakima Crossbars # 8880618 BaseClip Fit Kit # Y06185 I also recommend adding the Yakima Same Key System (SKS) Lock Cores # Y07202 which will lock the roof rack to your roof to deter theft. At this time there is not a roof rack system to fit the regular...
  view full answer...
• Recommended Roof Rack and Bike Rack for 2019 Ford F-350 Crew Cab
  We have everything you need to secure your bikes on the roof of your 2019 Ford F-350 Crew Cab. Starting with the roof rack I recommend the Yakima JetStream System. This consists of Black # Y00426 aluminum JetStream Crossbars, the BaseLine Towers # Y28TR, and the BaseClip Fit Kit # Y06185. This will provide you with a really sleek, aerodynamic system for a quiet ride and better fuel efficiency when compared to round or square bar racks. I have attached a short video demonstration that...
  view full answer...
• Roof Rack for 2020 Ford F-350 Super Duty to Carry Bike Racks
  For a roof rack for your 2020 Ford F-350 Super Duty that would allow you to carry a lot of bikes you'd want to go with a rack that has a longer crossbar like our Yakima Jetstream Rack # Y00426, # Y28TR, and # Y06185 which is 60 inches long. Then you could use a roof bike rack like the Yakima HighRoad part # Y02114 which allows you to keep the front wheel installed on the bike. Space-wise you wouldn't be limited on how many bikes you could carry as most likely you'd run out of roof capacity...
  view full answer...
• Adding A Roof Rack To A 2020 Ford F-350 Crew Cab For Additional Cargo Carrying Capacity
  Yakima OverHaul HD Adjustable Truck Bed Ladder Rack - Aluminum - 500lbs - 68" Crossbars # Y01151-58 has an on-road capacity of 500lbs, off-road capacity of 300lbs, and static capacity of 800lbs. The correct roof rack for your 2020 Ford F-350 Super Duty Roof Rack by Yakima would be the following parts: Yakima HD Crossbars - Aluminum - Black - 60" Long - Qty 2 # Y01157. BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 # Y28TR. HD Bar SL Adapter for Yakima BaseLine, SkyLine, TimberLine,...
  view full answer...
• Recommended Set Up for 2017 Ford F-250 to Haul 4 White Water Kayaks.
  I have a set up that will work great for your 2017 Ford F-250 to haul 4 white water kayaks. For a roof rack for your truck I recommend the following components: -Yakima HD Crossbars # Y01158 -BaseLine Towers for Yakima Crossbars # Y28TR -HD Bar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers # Y03541 -BaseClip Fit Kit for Yakima BaseLine Roof Rack # Y06185 To get your 4 kayaks strapped down safe and sound, I recommend the Rhino-Rack Nautic Stack Kayak Carrier...
  view full answer...
• Correct BaseClip Fit Kit for Yakima JetStream Crossbars on a 2024 Ford F-350 Crew Cab
  For your 2024 Ford F-350 Crew Cab using the Yakima JetStream Crossbars # Y00426 you're going to need the BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06185 with the towers # Y28TR.
  view full answer...
• Can Yakima Roof Rack From 2000 Ford F250 Be Used On A 2025 Ford F350?
  Hello Lori, thanks for reaching out. You may be able to re use certain components from your old Yakima roof rack, but I would need to know specifically what parts you have in order to say for sure. If you have the Yakima BaseLine towers like part # Y28TR, those could be used on the 2025 F350, you would just need a new fit kit # Y06185. You might be able to re use you crossbars but again it depends what you have. Yakima recommends a 58" or 60" crossbar for the 2025 F350. If you can tell...
  view full answer...
• Recommended Yakima Roof Rack for a 2024 Ford F-250 Crew Cab
  To add a Yakima roof rack to your 2024 Ford F-250 Crew Cab you will need the following parts: Yakima JetStream Crossbars - Aluminum - Black - 60" Long - Qty 2 item # Y00426 BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 4 item # Y06185
  view full answer...
• Can Two Thule Hullavator Kayak Carriers Be Used On A Thule TracRac SR Ladder Rack
  Yes, you can use two of the Thule Hullavator Pro Kayak Roof Rack and Lift Assist # TH898 on the Thule TracRac SR. It has plenty of capacity and space for both to fit, you'll just need to place the towers so that the crossbars are spaced 24" apart. For your 2022 Ford F-250 with a 6-3/4' bed you'll need part # TH43003XT-785 for the TracRac. The Thule Hullavator requires that the roof of the vehicle can hold at least 130lbs, but you'll be splitting this with the ladder rack. I'd just check...
  view full answer...
• Can I Reuse Yakima Q Towers for 2021 Ford F-250
  In 2016, Yakima phased out their Q-Towers and upgraded to their new BaseLine system. That means for vehicles that are model year 2016 or newer, there are no confirmed Q-clip fits for them so we need to get you a new roof rack for your 2021 Ford F-250. If you want to reuse your round bars to make a roof rack on your F-250 Crew Cab, you can do so with a new BaseLine system. That consists of BaseLine Towers # Y28TR, a RoundBar Adapter # Y03536, and BaseClip Fit Kit # Y06185.
  view full answer...
• Roof Rack Recommendatio nfor 2018 Ford F-250 Crew Cab that is Leased
  For your 2018 Ford F-250 Crew Cab the Yakima Roof Rack part numbers # Y00422, # Y28TR, and # Y06185 would be a great solution as it is a confirmed fit and the fact that it does not permanently modify the roof of the vehicle it is installed on. So you'd be able to take the roof off when it's time to return the lease and no one would know the difference. The aero shape of these bars also helps cut down on wind noise which is a nice feature as well. I attached an install video for thist...
  view full answer...
  
• Recommended Roof Rack and Kayak Carrier for a 2003 Toyota RAV4
  Lucky for you, Yakima does make a set of crossbars that are designed to work with vehicle's that have a bare roof like your RAV4. Check out the Yakima BaseLine FX Roof Rack for Naked Roofs # Y59UV with the BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06185. These crossbars measure 44 3/4" long, has a 165 lb dynamic weight capacity, and has an integrated top channel for roof mounted accessories. Since you also are looking for a way to transport some kayaks, I'd recommend checking...
  view full answer...
• Roof Rack Fit for 2016 Hyundai Elantra GT With Panoramic Sunroof
  I checked for you and there is a fit for a roof rack for your 2016 Hyundai Elantra GT with the panoramic glass roof (moonroof), which is from Yakima. I verified the fit with the manufacturer and roof rack consists of the following parts: - Yakima JetStream Crossbars # Y00425 Black - BaseLine Towers for Yakima Crossbars # Y28TR - BaseClip Fit Kit # Y06151 - BaseClip Fit Kit # Y06185 - Same Key System Lock Cores (Optional) # Y07204 This is going to give your '16 Elantra GT an easy to use,...
  view full answer...
• Solution for Carrying Multiple Bikes on Roof of 2021 Ford F250
  We absolutely have roof rack options for your 2021 Ford F250. Beginning with the roof rack, I'd recommend the Yakima CoreBar roof rack which would be assembled using these parts: • Yakima 70 inch CoreBar crossbars, part # Y00423 • Yakima BaseLine Towers, part # Y28TR • Yakima Vehicle-Specific fit kit, part # Y06185 With a 70 inch long crossbar, you'll be able to fit up to 5 bikes on the roof, but keep in mind that the roof rack has a 165 lb weight capacity, so unless your bikes are really...
  view full answer...
• Can 70 Inch Yakima JetStream Crossbars be Cut on 2021 Ford F-350 Crew Cab
  We have a similar option for you, but you do not want to cut or trim down the Yakima JetStream Crossbars # Y00427. Instead, there are different Yakima bars that are designed to be cut down if needed, called CoreBars. The 70 inch CoreBars, and rest of the parts needed for a Yakima roof rack on your 2021 Ford F-350 Crew Cab are the following: - Yakima CoreBar Crossbars # Y00423 - BaseLine Towers for Yakima Crossbars # Y28TR - BaseClip Fit Kit # Y06185 I do recommend considering locks...
  view full answer...
• Buying a Single Yakima HD Crossbar for a 2020 Ford F-250
  While we do not have a full kit for just one crossbar for your 2020 Ford F-250, I have compiled a list of the individual part numbers that make up the Yakima HD crossbars that are compatible with the SuperCab and CrewCab. For the crossbar itself, use part # Y95FR. It's the single bar, 60" long like the full kit. For the BaseLine Towers, use part # Y62TR. There are 2 in this kit. For the HD Bar SL Adapter, use part # Y03541. This, unfortunately, does not come in a quantity of 2, so you'll...
  view full answer...
• Half Roof Rack and Ladder Rack that Fits 2023 Ford F-350
  To do a half roof rack for the roof of your 2023 Ford F-350 you'd need the following: Yakima JetStream Crossbar part # 8880650 BaseLine Towers for Yakima Crossbars part # Y62TR BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers part # Y06185 There isn't a way to do a half ladder rack so best option would be an adjustable height rack like the Yakima Overhaul # Y01151-5855 so that you can have it match the height of your roof rack and if needed you could leave off the rear (or front)...
  view full answer...
• Roof Rack for Roof Tent on a 2019 Ford F-450 Super Duty Crew Cab
  While there are no roof racks that have a weight capacity of 400 lbs, I still believe we have a solution for your 2019 Ford F-450 Super Duty Crew Cab with the Yakima HD roof rack. This consists of the HD Crossbars # Y01157, BaseLine Towers # Y28TR, HD Bar SL Adapter # Y03541, and Fit Kit # Y06185. If you are looking to use a tent that has a 400 lb weight capacity like the Yakima SkyRise HD # Y07436 then you actually just need to make sure that the roof rack is rated for 165 lbs like the...
  view full answer...
• Is There a Solution for a Roof Rack on My 2021 Ford F-250 that Doesnt Require Drilling?
  I have a great no-drilling solution for you. While the Rhino-Rack Heavy-Duty Bar Roof Rack for Camper Shells - Track Mount - Black - 59" Long # Y01-130B requires drilling, there are options for your 2021 Ford F-250 Super Duty crew cab that do not require any drilling. To go this route, you will need the following parts: - Round 66" CrossBars for Yakima Roof Rack System (QTY 2) # Y00410 - BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 # Y28TR - RoundBar SL Adapter for Yakima...
  view full answer...
• Parts Needed to Install Yakima JetStream Crossbars on 2021 Ford F-250
  To install 60 inch Yakima JetStream # Y00427 aero-style crossbars on your Ford F-250, you'll need the # Y28TR BaseLine towers and the # Y06185 vehicle-specific fit kit.
  view full answer...
• How To Transfer Crossbars From a 2019 Ford F-350 to a Leer 100RC Topper
  The track systems are all pretty much universal so you can use Yakima accessories in Thule tracks or vice versa. In regards to weight, you will be limited to 165 lbs per set of crossbars no matter which system you choose as that is all the mounting feet can handle, even with the Yakima HD Crossbars System. The vehicle's roof would likely not be able to handle much more than this either. However, you can carry up to 330 lbs total but you would need to distribute the weight so that 165 lbs...
  view full answer...
• Correct Yakima Roof Rack For 2018 Ford F-250 Crew Cab
  Okay, we can get your 2018 Ford F-250 Crew Cab set up with the right Yakima roof rack, and let's start with your first question about the correct length bars. That is determined by the manufacturer when they test fit roof racks, which is how we know the correct length of crossbar for your truck are the 70 inch long bars. In regards to a disadvantage with the clips/clamp-on versus drilled on racks, there is no disadvantage at all. Really, the only reason someone might use a rack that that...
  view full answer...
• What Roof Rack do You Recommend for a 2017 Lexus LS 460?
  I have an answer about your Rhino-Rack crossbar system. Unfortunately, I confirmed that Rhino-Rack does not make a crossbar system that is compatible to fit your 2017 Lexus LS 460. Since they do not have any roof racks for your vehicle, they do not manufacture compatible fit kits for the crossbars. Fit kits from other manufacturers do not work with Rhino-Rack crossbars because each company produces specific fitments for their feet/towers. Here at etrailer, we have never seen anyone custom...
  view full answer...
• Recommended Roof Rack for a 2018 Ford F-350 Super Duty With a Naked Roof
  For your 2018 Ford F-350 super duty with a naked roof, I recommend going with the Yakima BaseLine FX Roof Rack for Naked Roofs - JetStream Aero Crossbars # Y56UV with the fit kit # Y06185. This roof rack system will work great with your naked roof, has a maximum weight capacity of 165-lbs, and has integrated t-slots so you can use roof mounted accessories as well.
  view full answer...
• Is It Possible To Add One Crossbar To The Roof Of A 2019 Ford F-350 Super Duty
  Absolutely! As long as your 2019 Ford F-350 Super Duty is a Crew Cab or Super Cab you can use the following parts to add just one crossbar to your truck: 60" Yakima JetStream Crossbar # 8880649 2 of the Replacement BaseLine Tower for Yakima Crossbars # 8880618 BaseClip Fit Kit # Y06185 I also recommend adding the Yakima Same Key System (SKS) Lock Cores # Y07202 which will lock the roof rack to your roof to deter theft. At this time there is not a roof rack system to fit the regular...
  view full answer...
• Recommended Roof Rack and Bike Rack for 2019 Ford F-350 Crew Cab
  We have everything you need to secure your bikes on the roof of your 2019 Ford F-350 Crew Cab. Starting with the roof rack I recommend the Yakima JetStream System. This consists of Black # Y00426 aluminum JetStream Crossbars, the BaseLine Towers # Y28TR, and the BaseClip Fit Kit # Y06185. This will provide you with a really sleek, aerodynamic system for a quiet ride and better fuel efficiency when compared to round or square bar racks. I have attached a short video demonstration that...
  view full answer...
• Roof Rack for 2020 Ford F-350 Super Duty to Carry Bike Racks
  For a roof rack for your 2020 Ford F-350 Super Duty that would allow you to carry a lot of bikes you'd want to go with a rack that has a longer crossbar like our Yakima Jetstream Rack # Y00426, # Y28TR, and # Y06185 which is 60 inches long. Then you could use a roof bike rack like the Yakima HighRoad part # Y02114 which allows you to keep the front wheel installed on the bike. Space-wise you wouldn't be limited on how many bikes you could carry as most likely you'd run out of roof capacity...
  view full answer...
• Adding A Roof Rack To A 2020 Ford F-350 Crew Cab For Additional Cargo Carrying Capacity
  Yakima OverHaul HD Adjustable Truck Bed Ladder Rack - Aluminum - 500lbs - 68" Crossbars # Y01151-58 has an on-road capacity of 500lbs, off-road capacity of 300lbs, and static capacity of 800lbs. The correct roof rack for your 2020 Ford F-350 Super Duty Roof Rack by Yakima would be the following parts: Yakima HD Crossbars - Aluminum - Black - 60" Long - Qty 2 # Y01157. BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 # Y28TR. HD Bar SL Adapter for Yakima BaseLine, SkyLine, TimberLine,...
  view full answer...
• Recommended Set Up for 2017 Ford F-250 to Haul 4 White Water Kayaks.
  I have a set up that will work great for your 2017 Ford F-250 to haul 4 white water kayaks. For a roof rack for your truck I recommend the following components: -Yakima HD Crossbars # Y01158 -BaseLine Towers for Yakima Crossbars # Y28TR -HD Bar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers # Y03541 -BaseClip Fit Kit for Yakima BaseLine Roof Rack # Y06185 To get your 4 kayaks strapped down safe and sound, I recommend the Rhino-Rack Nautic Stack Kayak Carrier...
  view full answer...
• Correct BaseClip Fit Kit for Yakima JetStream Crossbars on a 2024 Ford F-350 Crew Cab
  For your 2024 Ford F-350 Crew Cab using the Yakima JetStream Crossbars # Y00426 you're going to need the BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06185 with the towers # Y28TR.
  view full answer...
• Roof Rack for 2022 Ford F-250 Crew Cab
  Hi Devin; I'm not aware of one that attaches to the fixed points on your roof but we do have roof racks you can add to your 2022 F-250 without drilling. All of the roof racks are going to clamp on using the door jambs which also means the rack is easy to install and take off. Sticking with Yakima, you can use the Yakima BaseLine Roof Rack for Naked Roofs # Y76KB. This comes with their extremely quiet JetStream crossbars along with the feet and fit kit required for installation.
  view full answer...

Do you have a question about this Roof Rack?