See what our Experts say about this Inno Roof Rack

• Will Inno Square Crossbars Fit a Thule 450 Crossroad Roof Rack?
  Yes, they will Aaron! The Inno Square Crossbars item # INB147 will indeed fit the older Thule 450 Crossroad roof rack. They measure 58" long x 7/8" tall x 1-1/4" wide, which is the same size but it doesn't have the track in the bottom like the Thule ones do. What do you use your Thule 450 Crossroad roof rack for?
  view full answer...
• What is the Inno Roof Rack Weight Capacity for My 2016 Toyota Tacoma Limited Double Cab?
  Hello Dana, Yes, the Inno Square Bar Roof Rack for Naked Roofs - Steel - Black - Qty 2 # IN79TR will be a great fit for your 2016 Toyota Tacoma Limited Double Cab without factory rails. As for the weight rating, you are only as strong as the weakest link, the feet are actually rated for 132 pounds, so I cannot recommend putting more weight on the roof rack than that. As you already know, you will want to check your owners manual to see what Toyota says you can put up there, based on my...
  view full answer...
• Will Inno Ski and Snowboard Roof Rack Fit On Roof Of 2013 Ford Flex Without a Roof Rack?
  I was able to verify with Inno that you will need a roof rack to use the Inno Ski and Snowboard Roof Rack # INTX726 on your 2013 Ford Flex with the bare roof. They do not have a way to install the rack the way you see in the image you found. The Inno Square bar rack consisting of the Crossbars # INB147, Feet # INSUT and Fit Kit # INK263 will allow you to mount their carrier. The mounts for the roof rack are very similar in the way they clamp to the door frames. We do have the SeaSucker...
  view full answer...
  
• Will the Inno Square Crossbars Fit the Thule Tracker II Feet?
  Yes. Since the Inno Square Crossbars # INB147 have the same dimensions as the Thule SquareBar Evo Crossbars # TH712300 (7/8" tall x 1-1/4" wide), the Inno Square Crossbars will fit the Replacement Railing Foot for Thule Tracker II 753-2152..
  view full answer...
• What Inno Square Bars do You Carry over 50 Inches Long for My 2022 Chevy Equinox?
  Yes! We do carry longer Inno Square Crossbars than the # INB127. For longer sizes, here is what we carry: - Inno Square Crossbars - Steel - Black - 58" Long # INB147 - Inno Square Crossbars - Steel - Black - 65" Long # INB165 - Inno Square Crossbars - Steel - Black - 71" Long # IN434 - Inno Square Crossbars - Steel - Black - 79" Long # IN436L It is important to note that Inno recommends the 50" # INB127 maximum crossbar length for your 2022 Chevy Equinox. If you go with longer crossbars,...
  view full answer...
• Can Hullavator and J-Style Carrier be Used to Carry Two 40 lb Kayaks on a 2003 Honda Odyssey
  We do have an option for you to use a roof rack to carry your kayaks but I am unsure as to the weight capacity of the roof of your 2003 Honda Odyssey. The Inno roof rack that we carry has a weight capacity of 140 lbs which would allow you to use the Hullavator # TH898 and the Hull-A-Port # TH834, but if your roof itself doesn't have a weight capacity of at least 135 (weight of the kayaks and both carriers combined) then you will be overloading your roof. The Thule roof rack options for...
  view full answer...
• Carrying A Previous Generation Thule Hullavator On A 2011 Subaru Forester
  Your least expensive option would be to go with an Inno roof rack. Your older Thule Hullavator was designed to go with either square crossbars or round crossbars. The Inno rack uses square crossbars that are the same dimension as Thule's square crossbars. Your rack will consist of the following; Inno Square Crossbars - Steel - Black - 50" Long - Qty 2, part # INB127 or Inno Square Crossbars - Steel - Black - 58" Long - Qty 2, part # INB147 and Inno Feet for Square Crossbars - Raised Side...
  view full answer...
  
• What Crossbars Should be Used with Inno Roof Rack Feet part # INMDK
  You need to use Inno crossbars with the Inno Feet part # INMDK that you referenced. Based on the length you said you wanted you'd want the part # INB147 which is a pair of 58 inch long bars.
  view full answer...
• How to Carry 2 Kayaks with the Darby Extend-A-Truck Kayak Carrier on a 2013 Toyota Tundra
  The foam block that comes with the Darby Extend-A-Truck Kayak Carrier # DTA944-968-924 is really only meant to be used with 1 kayak so if you plan on carrying 2 you need to acquire more blocks with part # MPG158. We do have some tie-downs attached to the load extender down to the safety chain loops to help stabilize the load extender. Please note that this kit is meant to be used for short distances as the roof rack crossbar is very basic and isn't meant for long distance traveling. If...
  view full answer...
• Fit of the Inno Square Crossbars On A 2020 Chevrolet Traverse
  Yes, the Inno Square Crossbars # INB147 with the Inno Feet for Square Crossbars # INSUT and the Custom Fit Kit for Inno XS200, XS250, and INSU-K5 Roof Rack Feet # IN63FR will work great with your 2020 Chevrolet Traverse LS. These crossbars measure 58" long x 7/8" tall x 1-1/4" wide and has a weight capacity of 220-lbs.
  view full answer...
• Weight Limit of Thule Traverse Roof Rack with FitKit # THKIT1520 on 2014 Ram 1500 Crew Cab
  The different components that make up the Thule Traverse roof rack for your 2014 Dodge 1500 crew cab have differing ratings. The load bars # INB147 for example are themselves rated for 165-lbs while the foot pack and fit kit are rated lower, 130-lbs. It can also be that the vehicle has a lower roof weight rating than any of the rack system components. Whenever different parts of a system have different ratings, the lowest-rated one determines the overall capacity. My contact at Thule...
  view full answer...
• Are the Inno Square Crossbars # INB147 and the Malone SteelTop Roof Rack # MPG202 the Same?
  I have an answer for you. Unfortunately, the Inno Square Crossbars # INB147 does not come with the feet (that have the locking mechanism) that are needed to mount the crossbars to your 2018 Honda Odyssey's roof. The Malone SteelTop Roof Rack # MPG202, on the other hand, comes with all the parts needed to mount onto your vehicle's roof. For the feet for the Inno crossbars, that is part # INFR. Other than the feet on the Inno square crossbars, another difference between the roof rack systems...
  view full answer...
• Recommended Roof Rack for a 2007 Toyota Sienna Using a Thule Hullavator
  I would be happy to! There are two different types of rails to mount a roof rack you could have on the roof of your 2007 Toyota Sienna so I will make recommendations for both. The Thule Hullavator item # TH898 also requires an extra 4" - 8" past the mounting legs for the lift assist function to operate without hitting the side of your van. I have listed the two options below that would be the best choice and included the longer crossbars: With Raised Rails Rhino-Rack Vortex Aero Crossbars...
  view full answer...
• What Crossbars and Fly Rod Carrier do You Recommend for My 2019 Chevy Traverse?
  When looking to mount a CRC fishing rod system to the Malone AirFlow2 Crossbars # MPG216 on your 2019 Chevy Traverse, it really depends on the mounting clamps on your CRC system. If you already own a CRC system, I recommend measuring the width and depth of your clamps to make sure they can wrap around the 3" wide x 1" tall crossbars of the Malone AirFlow2. With that being said, the AirFlow2 crossbars will work great with a compatible CRC setup on your vehicle. It is important to note, though,...
  view full answer...
• Will the Thule Stacker Work with the Inno Square Crossbars
  Yes, the Inno Square Crossbar System part # INB147, part # INSUT, and part # INK263 which is a fit for your 2011 Ford Flex will work with the Thule Stacker part # TH830. This option will allow you to carry multiple kayaks on the roof of your vehicle. The roof racks comes with locks for security and the carrier comes with tie-downs. I have attached a review video on each of these items for you. Please note that the weight of the roof rack, stacker, and water sport accessories will need...
  view full answer...
• Can 2007 Chevy Suburban w/ Raised Rails Use Inno Square Crossbars Longer Than 54 Inches
  If you'd like you can go with Inno square crossbars that are longer than the 54 inch # INB137 on your 2007 Chevy Suburban with raised side rails. There aren't 60 inch crossbars but you can go with 58 inch long bars to give you some extra space, and here is exactly what you will need: - Inno Square Crossbars - 58" Long # INB147 - Inno Feet for Square Crossbars - Raised Side Rails # INFR This will give you a nice amount of added room to carry cargo on top of your '07 Suburban, and the...
  view full answer...
• Roof Rack Recommendation for 2017 Acura MDX with a Naked Roof
  We do have a roof rack that fits the naked roof on your 2017 Acura MDX, but the SportRack Semi-Custom Roof Rack # SR1008 will not fit. For your application I recommend the Inno Square Bar roof rack system which consists of the following: 58" Long Square Crossbars - # INB147 Inno Feet - # INSUT Custom Fit Kit - # INK656 This will actually fit much better than the SportRack roof rack system and we have an install video of the Inno on a 2016 Acura MDX that you can check out.
  view full answer...
• How Do I Know Which Roof Rack Accessories Will Work With My Roof Rack On 2012 Scion XB?
  When determining if certain accessories can be mounted to a roof rack system you want to look at a few things. First, if it is a clamp-on accessory then you to make sure it can fit the style of roof rack that you have (square, round, aero etc.). You then want to check the max crossbar dimensions that the accessory can fit and make sure the roof rack is not bigger than that max dimension; these dimensions are typically listed on the product page of roof racks and any roof rack-mounted accessories....
  view full answer...
  
• Recommended Carrier for SUP on 2002 Toyota Tundra Extended Cab
  I have two options I recommend for you to carry your SUP on your 2002 Toyota Tundra Extra Cab. Either set-up will work great for carrying your SUP. One option is to use crossbars on the cab of your truck to carry the SUP. I recommend using the Inno Square Bar Roof Rack, # INB147 for the crossbars, # INSUT for the foot pack, and # INK532 for the fit kit. These crossbars have a 140 pound weight capacity and a 28 inch spread when installed on your Tundra. To hold your SUP while on the crossbars,...
  view full answer...
• Roof Rack for 2017 MDX with Naked Roof for Carrying 2 Kayaks
  I would go with an aftermarket roof rack for your 2017 Acura MDX as it's going to cost considerably less and be just as good if not better. For the money and the quality the Rhino Rack # RRVA137B-2, # RRRLKVA, and # DK400 is the best option. It gives you an aero bar roof rack that's very high quality at a price that beats the higher end rack manufacturers. The INNO kayak carrier part # INA450 then would be a great choice as it can carry up to 2 kayaks like what you need.
  view full answer...
• Inno Roof Rack Recommendation for 2007 Subaru Forester
  For your 2007 Subaru Forester with raised side rails we have the Inno roof rack part numbers # INB117, # INTR, # INTR104 that INNO recommends as a fit. The bars that come with this, # INB117 are 46 inches long. If you wanted the longer 58 inch bars you'd need the part # INB147.
  view full answer...
• Rooftop Cargo Basket for 2005 Toyota Tundra Double Cab With Inno Square Bar Roof Rack
  We do have a rooftop cargo basket for your 2005 Toyota Tundra Double Cab that will work with the square bar roof rack from Inno, which consists of the following: - Inno Square Crossbars # INB147 - Inno Feet for Square Crossbars # INSUT - Custom Fit Kit # INK532 What you will need is a rooftop cargo basket and rooftop cargo bag, which you can combine to give you the same amount of carrying capacity as a rooftop cargo box. The best option is from Yakima: - Yakima LoadWarrior Roof Rack...
  view full answer...
• How To Carry Bike and Cargo Box On 2012 Acura MDX with Bare Roof
  The Inno Square Crossbar System part # INB147, part # INSUT, and part # INK590 is an excellent cost effective option for a 2012 Acura MDX and it even comes with locks for security. It can then be used for a bike rack like the Inno Tire Hold II Roof Bike Rack part # INA389 and a cargo box like the SportRack Vista XL Cargo Box part # SR7095. The two should fit together width wise no problem and because the cargo box has a higher profile rather than longer length it should clear the hatch...
  view full answer...
• Roof Rack Fit for 2013 Toyota Tundra CrewMax
  We do have a reasonably-priced roof rack option for your 2013 Tundra CrewMax, but none of the SportRack roof racks like the # SR1002 you mentioned would be compatible. Inno offers a roof rack that would be assembled from the following parts: 58 Inch Square Crossbars, part # INB147 Roof Rack Feet, part # INSUT Vehicle Specific Clamp Kit, part # INK742
  view full answer...
• Will Inno Roof Rack for 2016 Kia Optima Allow Water to Leak in to Vehicle
  The door clamp style of roof racks like the Inno part # INB137, # INSUT, and # INK685 do not allow water to leak into the vehicle. If you check out the picture I attached you can see that the clamp actually fits above the door seal.
  view full answer...
  
• Cost Effective Way to Carry Two Kayaks on the Roof of a 2003 Toyota Avalon
  For a roof rack confirmed to fit your 2003 Toyota Avalon SLE I recommend the Inno Square Crossbar Roof Rack System which is composed of part # INB137, part # INSUT, and part # INK202. This is an excellent cost effective system for you. It has square crossbars as the title states that will accept a wide range of different rooftop carriers. The bars have a 140 lb weight capacity though you will need to check the roofs weight capacity before use. The best way to carry two kayaks on the roof...
  view full answer...
• Replacement Lock Cover for Inno Feet
  Hi Scott; sorry for the delay on this it took a while to hear back from Inno. The part you need is the Replacement Lock Cover Set for Inno Roof Rack Feet Stays for Bare Roofs # IN97YV. This replaces the lock and cover on the # INSUT. However, this will be a random lock so more than likely it won't match the others on your roof rack. We don't have a way to get a specific lock core for it to remain keyed alike.
  view full answer...
• Parts Needed to Install Old Thule Square Bars on 2000 Toyota Tundra Access Cab SR5
  Hey Chris! To install your Thule square bars on the roof of your Tundra you will need the Inno Feet for Square Crossbars # INSUT along with the Custom Fit Kit # INK153. What will you be using the solar for?
  view full answer...
• Roof Rack Recommendation for 2006 Chevy Uplander
  Thule does not make a roof rack solution that fits the naked roof versions of the 2006 Chevy Uplander. Closest thing would be the Inno brand roof rack that consists of part numbers # INB127, # INSUT, and # INK585. This won't reuse any of your Thule roof rack but your roof carriers will fit this same square bar style of rack that you had.
  view full answer...
  
• Thule Roof Rack Recommendation for 2012 Toyota Camry
  For a new Thule roof rack that fits your 2012 Toyota Camry the Wingbar Evo rack part numbers # TH711420, # TH710501, and # TH145149 would be a great choice confirmed to fit the vehicle and the bike racks you have as well as long as they can fit aero shaped bars.
  view full answer...
• Recommended Roof Rack and Kayak Carrier for 2018 Honda Civic 2 Door
  For your 2018 Honda Civic 2 Door with a bare roof I recommend the Inno Aero Bar Roof Rack because it will provide you with the quietest rack available for your vehicle. This system consists of # INXB130-2 for the two 51 inch Aero Crossbars, # INXS250 for the Inno Through Feet, and # INK683 for the Custom Fit Kit. In addition to reducing noise during travel, the aero-style bars also offer a really sleek appearance and plenty of capacity to support your 2 kayaks. I have attached a short...
  view full answer...
  
• How to Use Older Thule Square Bars with 2017 Toyota Highlander with Naked Roof
  Hey John, I do have a solution for you but the Thule square bar roof racks changed a few years ago and now their current feet don't work with the older style of crossbar. The new crossbar has a channel that runs along the bottom of it whereas old style did not have this. But we have found is that the Inno square bars are exact same dimensions so you can use their feet and fit kit with the bars you have now. For that you'd need the part numbers # INK666 for the correct fit kit and part...
  view full answer...
• Roof Rack for 2010 Toyota Corolla Similar to Thule Square Bar Rack
  Thule stopped offering the fit kit you mentioned for your 2010 Toyota Corolla which means that while we have other great roof racks that can be installed on your vehicle we do not have any Thule options. For a rack that is very similar to the Thule square bar racks we have the Inno part # INB127, # INSUT, and # INK593 that fits your vehicle. This rack actually has the exact same crossbar dimensions as the Thule square bars but at a much better price.
  view full answer...
• Roof Rack for 2013 Ford Focus
  Roof rack # SR1010 is not a fit for a Ford Focus, is this the one you have? If you let me know what year your vehicle is I can recommend the right fit, but this one is not going to work on a Focus.
  view full answer...
• Roof Rack Capacity for a 2017 Ford Fiesta
  The racks you see have a different weight capacity depending on if your 2017 Ford Fiesta is a 5-door hatchback or 4-door sedan. For example, the Rhino Rack that consists of Aero cross bars # RRVA118B-2, legs # RRRLKVA and fit kit # DK046 have a 110 lb capacity if installed on a '17 Fiesta that is a 5-door hatchback but the same rack has a 165 lb capacity if installed on a '17 Fiesta that is a 4-door Sedan. Choosing what model of Fiesta you have will lead you to the correct rack. I've attached...
  view full answer...
• How To Determine Crossbar Placement On A 2024 Ford Maverick
  Hello Warren, I can definitely help. Roof rack manufacturers test vehicle roofs to determine the strongest points. They develop their fit kits to fit in this predetermined spot. So, this measurement will vary from vehicle to vehicle. For a 2024 Ford Maverick, the front crossbar will be placed 12-1/4" back from the top edge of the front windshield. The rear crossbar will be placed about 27-1/2" behind the front crossbar. There may be a bit of front/back wiggle room, but generally you will...
  view full answer...
• Recommended Cost-Effective Roof Rack for a 2009 Chevrolet Malibu and a 2012 Nissan Maxima
  The SportRack # SR1002 is a Semi-Custom roof rack. It will fit your 2009 Chevrolet Malibu and will work if you are looking for the most cost-effective option out there. If you plan on using the roof rack frequently though I highly recommend going with a custom roof rack for your Malibu. A custom rack is one that uses a fit kit specially designed and tested to fit your roof properly. The most cost-effective option we have in this category is the Inno rack which consists of the Square Crossbars...
  view full answer...
• Roof Rack Recommendation for 2008 Honda Fit for Carrying Kayak Carrier
  For your 2008 Honda Fit the Inno roof rack part numbers # INB127, # INSUT, and # INK219 is a confirmed fit and would do a great job carrying a kayak carrier. For the carrier we have the Thule Hullaport part # TH849000 which will do a great job and is compatible. It's padded, can fold down when not in use, and can be expanded to carry a second kaya if ever needed.
  view full answer...
• Roof Rack Options For A 2024 Honda CR-V
  Hey Shelby, Roof rack components are all brand and even model specific so I'll need to know exactly what crossbars you have to find any other compatible components. The # INSUT feet you referenced are for Inno square crossbars. If you want to use them then you would need fit kit # IN45RR and 54" Inno sqaure crossbars # INB137. If you can get me more info on what you have or if you're just wanting to go with a whole new rack then let me know and we can figure out what the best options...
  view full answer...
• Cost Effective Roof Rack Recommendation for 2011 Honda Accord
  What we've found with the Sportrack Semi-Custom roof racks like the part # SR1002 is that they don't always fit the best. Reason being they are designed to fit as many vehicles as possible which means they don't fit everything perfectly. The price makes these hard to not be tempted by, but your best option is a fully custom fit roof rack like the Inno part # INB127, # INSUT, and # INK745 otherwise you'll have to get somewhat creative to get the Sportrack to fit right.
  view full answer...
• Roof Rack, Kayak Carrier and Paddleboard Carrier Recommendation for 2011 Ford Edge with Naked Roof
  Do you have crossbars on your roof already that run from left to right? Or what does you roof look like now? I can see what would be best option from there.
  view full answer...
• Recommended Roof Rack for 2014 Mazda 3 Without Fixed Mounting Points
  If your 2014 Mazda 3 does not have the fixed mounting points, I recommend the Rhino Rack Aero Bar Roof Rack. This system consists of # RRVA126B-2 for the two 49 inch Vortex Aero Crossbars, # RRRLKVA for the 2500 Series Legs, and # DK406 for the Custom DK Fit Kit. This will provide an extremely quiet roof rack system with a weight capacity of 165 pounds. If you find that your vehicle does in fact have fixed mounting points, you can use the same crossbars and 2500 Series Legs as above,...
  view full answer...
• What is the Inno Roof Rack Weight Capacity for My 2016 Toyota Tacoma Limited Double Cab?
  Hello Dana, Yes, the Inno Square Bar Roof Rack for Naked Roofs - Steel - Black - Qty 2 # IN79TR will be a great fit for your 2016 Toyota Tacoma Limited Double Cab without factory rails. As for the weight rating, you are only as strong as the weakest link, the feet are actually rated for 132 pounds, so I cannot recommend putting more weight on the roof rack than that. As you already know, you will want to check your owners manual to see what Toyota says you can put up there, based on my...
  view full answer...
• Weight Capacity For The Inno Square Bar Roof Rack System For My 2019 Kia Sportage
  The Inno Square Bar System # INB137 # INSUT # INK686 you will have 132 lbs of dynamic weight capacity. That is the amount of weight you can have on the roof rack system while driving. Plenty of weight for a cargo basket like this one # Y07138.
  view full answer...
• How to Mount Old Thule Square Bars to 2020 Toyota Camry
  Thanks for the pictures. What you have there are the old Thule square bars. Since none of the current Thule feet are compatible with those crossbars you will need to use the Inno Feet for Square Crossbars # INSUT. The Inno bars are the same as the old Thule so they're compatible with the feet. You will also need the Custom Fit Kit # INK498 to attach them to your 2020 Camry.
  view full answer...
  
• Can Old Thule Square Bars Be Mounted On A 2008 Honda Civic 4-Door LX?
  Hey Matt, thanks for reaching out. There is a solution for using the old-style Thule square crossbars on a 2008 Honda Civic, and it involves using parts from an Inno roof rack. The Inno square bars have the same dimensions as the old Thule bars and they do not have a bottom channel, so they mount the same way. To mount them on your 2008 Civic, you will need the following: - Inno Feet for Square Crossbars - Naked Roofs - Black - Qty 4 # INSUT - Custom Fit Kit for Inno XS200, XS250, and...
  view full answer...
• Parts Needed To Mount Thule Square Crossbars On 2016 Honda CR-V
  Hello Chad, thanks for reaching out. I do have a solution for you, but first I will need to know exactly what kind of Thule square bars you have. Basically there are new-style and old-style bars. The new-style bars have a bottom channel for mounting the towers. The old-style bars are just a solid bar and do not have a bottom channel. We have solutions for both, just select from the following depending what kind of bar you have. New Style bars: - Evo Clamp Feet for Thule Crossbars - Naked...
  view full answer...
• Will Inno Ski and Snowboard Roof Rack Fit On Roof Of 2013 Ford Flex Without a Roof Rack?
  I was able to verify with Inno that you will need a roof rack to use the Inno Ski and Snowboard Roof Rack # INTX726 on your 2013 Ford Flex with the bare roof. They do not have a way to install the rack the way you see in the image you found. The Inno Square bar rack consisting of the Crossbars # INB147, Feet # INSUT and Fit Kit # INK263 will allow you to mount their carrier. The mounts for the roof rack are very similar in the way they clamp to the door frames. We do have the SeaSucker...
  view full answer...
  
• Why are Roof Rack Crossbars Different Lengths for a 2007 Acura MDX with Naked Roof
  You have to consider the whole system and how the designs are different. Since they are all different the bars won't necessarily be all the same. There are some designs, for example from Inno, that have bars that are even shorter because the way the feet are designed they have to be a certain length. If you want to go with a quality aero bar roof rack the Rhino-Rack is a great choice. You will need the following parts to install it on your 2007 Acura MDX with naked roof: 2500 Roof Rack...
  view full answer...
• What Roof Rack Fits Both My 2011 Volkswagen Jetta and My 2007 Toyota Matrix?
  I have a great solution for you. While we don't have a complete interchangeable roof rack that fits both your 2011 Volkswagen Jetta (bare roof) and your 2007 Toyota Matrix (bare roof), we do have a system that can use the exact same crossbars and mounting feet. The only difference between the two sets of roof racks are the fit kit that connects the feet to the roof of the vehicles. The difference parts are needed because fit kits are designed for specifically to fit the contours of roofs...
  view full answer...
• How To Carry Bike and Cargo Box On 2012 Acura MDX with Bare Roof
  The Inno Square Crossbar System part # INB147, part # INSUT, and part # INK590 is an excellent cost effective option for a 2012 Acura MDX and it even comes with locks for security. It can then be used for a bike rack like the Inno Tire Hold II Roof Bike Rack part # INA389 and a cargo box like the SportRack Vista XL Cargo Box part # SR7095. The two should fit together width wise no problem and because the cargo box has a higher profile rather than longer length it should clear the hatch...
  view full answer...
• Recommended Trailer Hitch and Bike Rack for 2014 Volkswagen Jetta Sportwagen
  For your 2014 Volkswagen Jetta Sportwagen SE, I recommend the Curt Class I Trailer Hitch Receiver # C11474. When compared to the other trailer hitches confirmed to fit your vehicle, the Curt has the best ground clearance measurement of about 10-1/2 inches from the ground to the top of the hitch receiver. I have attached an installation video on your vehicle for you to check out. Keep in mind that Curt requires you to use stabilizing straps like # 18050 for non-trailer loads such as bike...
  view full answer...
• Does Inno Square Bar Roof Rack Fit 2009 Acura MDX With Naked Roof
  Yes, the Inno square bar roof rack will absolutely fit your 2009 Acura MDX with a naked roof You do need to purchase the legs separately, and everything you need for the complete Inno roof rack on your 2009 Acura MDX are the following: - Inno Square Crossbars # INB147 - Inno Feet for Square Crossbars # INSUT - Custom Fit Kit # INK590 Since these are square crossbars, I do recommend considering a wind fairing to help minimize the wind noise, with the correct one being the Inno Fairing...
  view full answer...
• Recommended Roof Rack and Ski/Snowboard Carrier for a 2012 Volkswagen Jetta
  The Inno Dual Angle Ski and Snowboard Carrier INUK729 (discontinued) is a great ski/snowboard carrier but it only fits with certain vehicles which unfortunately does not include your 2012 Volkswagen Jetta. The good news is that we still have options for you though! For your application I recommend installing the Inno Aero roof rack system because it's simple, yet doesn't lack any features and is more cost-effective than most of the other roof rack systems that fit your vehicle. Here are...
  view full answer...
• Recommended Roof Rack Ending In Towers for Factory Look on 2012 Acura MDX
  We have exactly what you are seeking. I recommend the Inno Roof Rack System which uses 45" Long and 48" Long Inno Aero Crossbars # INXB115-123, Inno Flush Feet for Aero Crossbars # INXS200, and Fit Kit # INK590. This option has crossbars that do not overhang the feet like you are wanting and give you a 165lb capacity to carry whichever accessories you are wanting.
  view full answer...

Do you have a question about this Roof Rack?