RV Bumper 2" Trailer Hitch Receiver - Clamp-On
(123 reviews)
Price: $45.00
In Stock
RV Bumper 2" Trailer Hitch Receiver - Clamp-On
Item # S64025
Retail:$67.71
Our Price: $45.00
You Save: 34%
Orders above $99 qualify for Free Shipping
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (123)
- Q & A (0)
- Photos
Swagman RV and Camper Hitch - S64025
- Bumper Mount Hitch
- 4 x 4 Inch Bumper
- 4-1/2 x 4-1/2 Inch Bumper
- 4-1/4 x 4-1/4 Inch Bumper
- Bolt-On
- 2 Inch Hitch
- Swagman
Attaches to RV bumper to provide a 2" receiver opening that works with hitch-mounted bike racks. Designed for 4" x 4" and 4-1/2" x 4-1/2" continuous-welded steel bumpers.
Features:
- 2" Hitch receiver opening to accommodate hitch accessories
- Solid steel construction
- Powder coated to resist corrosion
- For use with up to a 4-bike non-folding, standard bike rack
- Not to be used for towing or with cargo carriers
- For use above the bumper only
- Never exceed the bumper's stated capacities
- Attaches to bumper using 4" bolts (included)
Specs:
- Designed for 4" x 4" and 4-1/2" x 4-1/2" continuous-welded steel bumpers
- Not for use on aluminum or spot-welded bumpers
- Load capacity: 200 lbs
- Distance from the center of hitch pin hole to end of receiver: 3"
- Mounting plate measures 6" x 6"
Note: Not to be used with an adapter or extender.
64025 RV Bumper 2" Trailer Hitch Receiver - Clamp-On
Tech Tip
No drilling required for installation
Customer Satisfaction Score:
95% were satisfied with this product
5% of customers were not satisfied
- etrailer mistake
- Wrong item was ordered
- Missing parts
Customer Reviews
RV Bumper 2" Trailer Hitch Receiver - Clamp-On - S64025
Average Customer Rating: 4.8 out of 5 stars (123 Customer Reviews)
Attaches to RV bumper to provide a 2" receiver opening that works with hitch-mounted bike racks. Designed for 4" x 4" and 4-1/2" x 4-1/2" continuous-welded steel bumpers.by: Clark C09/07/2022
Hold up well after 160 miles camping trip. Mounted at 4” rear bumper of my camping trailer to accomodate 2 bike rack. I only carry 1 bike for the trip. Solid and well secured using provision screw that you need to tightened once bike rack is mounted to avoid movement when driving.
by: George 02/12/2024
Very happy with the item. Well-made, and fits my RV bumper.
by: Jimbo09/01/2014
Very pleased with this product it's robust and solid, the bolts and lock nuts are high quality. Ordering and shipping were easy and fast. The part fit perfectly I used some gasket material to protect the bumper, would have liked to have the torque specs on the nuts. I use a Thule bicycle rack and this hitch allows me to bring along the bikes on my 5th wheel.
by: Lazy Creeks06/30/2018
Great vendor, great product.
We have 6 trailers at our home; 2 boat, 1 tandem utility, 3 single axle utility that need to be moved around frequently for space reasons.
Airports need to "push back" planes from their gates for which the "tugs" have hitches on their front bumpers. That arrangement allows greater steering control than if their hitches were mounted on the rear of the "tugs". So, I've mounted this wonderful hitch to the front bumper of my '86 Isuzu Trooper II 4-wheel drive which I use to position my trailers. Of course it's NOT safe for highway travel, but as a positioning aid, it is superb. Also; etrailer communications and speed of delivery cannot be improved. Don't change anything, etrailer.
by: Kevin 06/17/2020
I'm using this to mount a pretty large and heavy 4-bike rack to the rear bumper of my camper. This thing is stout. It has nylock nuts so I don't have to worry about the nuts backing off. Also has a threaded bolt hold in the side w/ bolt so that you can snug up whatever you put in the receiver (bike rack, etc.) to keep it from swaying. I really like that feature.
by: Michael J04/23/2014
Opened the box and was immediately impressed by the construction quality of this bike rack receiver. Easily installed on the bumper of our trailer and again, I was very impressed with the sturdy bolts, back plate and receiver. Too bad Swagman doesn't make one of these for my inferior spare tire holder.
Michael J.
4/23/2015
This is a great product, period! Perfect match for my 4 trailer bumper and my bike rack. But more importantly is the quality service I receive from etrailer. They are a great source for everything you could possibly need for your trailer or RV. Ive ordered several items from them and the quality is always 5 Star! Cannot say enough good things about their customer service. They are 5 Star from top to bottom. They set the standard for customer service and products.
by: John 06/09/2020
Luck was on your side for a nice piece of furniture for my trailer. The package arrived ok but when I went to open it -- I had no trouble. The shipping expert had forgotten to tape the box on the lid!!! Thankfully because the connector was tightly packed, it did not fall our and break someones foot or get lost and thrown in the trash.
John
6/11/2021
Like it is supppose to!
by: John M.08/05/2015
The RV Bumper Hitch Receiver is of great quality and is easily installed. I used it to mount to my trailer steel bumper so I can carry my bikes which mount on a receiver type rack.
John M.
8/16/2016
All three of these products have held up well and performed well. Thanks.
by: Patricia09/18/2018
Swagman hitch fits securely on our 4” trailer bumper. Our standard bike rack works fine on the hitch. I have had several campers ask me where I got the bumper hitch and have recommended etrailer for their solid customer service
by: Jim S.03/17/2017
The Swagman RV Bumper 2" Trailer Hitch receiver is a very solid hitch receiver especially for the Swagman Dispatch 2 Bike Platform Rack - 2". Along with the threaded pin from the bike rack and the set bolt on this receiver there is no play or movement in the receiver tube. My bumper is 4" square and will require spacers on the back side to fully secure, minor issue.
by: Doug 09/22/2022
Works great on travel trailer tube bumper. As cheap to buy rather than making it
by: Glenn03/12/2018
Etrailer service is always top notch with fast shipping. They are my go-to whenever I need parts or service items on my RV's trailers or truck.
About this hitch. Easy to install & does the job. Needed it to carry bikes on the back of our travel trailer. Due to ground clearance as you leave some gas stations, I would not mount it below the bumper you may drag the bikes on the ground. In fact they say not to bolt it underneath the bumper due to the limits of the bolt strength. So for what it is intended for, it's a great solution.
by: Mike07/06/2016
Purchased to fit on my RV bumper for bike rack/cargo carrier. Installation is as basic as you can get. I was surprised that the bolts were grade 8, but there were no washers. See no reason why it won't work very well.
by: Mark 09/08/2022
Had it for a year now it’s holding up perfectly, still looks like new. I use it for my bike rack and it works great.
by: Jay W.12/06/2017
RV Bumper Hitch attachment: Works perfect! I use two, one on each end of the bumper to attach flag pole holders. Have already had comments about the product and the professionalism of the staff and the quick mailing was impressive!
Installation was simply bolting the product onto the bumper, how easy is that!!??
No more use of U-Bolts and or having to weld pipe onto the RV in order to flag my NASCAR flags at the track(s).
Do not be doubtful of this product!! Get yourself one or two!! Thanks etrailer!!
by: Tom A.10/11/2014
I installed this item to mount the Prorack 2 bike rack on the bumper of our new trailer so that we could conveniently carry 2 lounge chairs. It was nicely fabricated and finished, and installed easily with the hardware included. I'd have given it an "excellent" rating, but I'm not sure that there won't be some future corrosion issues with the bolts provided due to the type of surface treatment. However - with this stated - I'd definitely consider purchasing this item again to meet a similar need in the future.
by: Charles M05/18/2018
I ordered the Swagman RV hitch s64025. Upon receiving the hitch early Wednesday afternoon, I opened the box and noticed that the bottom plate was missing. I immediately called etrailer and spoke with Crystal. She was sympathetic and totally understanding of my situation. She immediately placed an order for a replacement. I received the replacement hitch early Friday afternoon. I'm just waiting for instructions to return the old hitch. The original box may have been opened somewhere during shipment--I can't be sure. However, I would not hesitate ordering anything from etrailer. I ordered other items as well and they all arrived on-time and in good condition. A big Thank you Crystal, and I would be remiss if I didn't thank Reesa, and Tiffany for their help in placing other orders. This is what I call a Five-Star customer oriented company--nothing short of OUTSTANDING!!!
by: Andrew 09/03/2020
Good product, reasonable price, easy to find on etrailer. Just what was needed to add a bike rack on the rear bumper of our travel trailer. Just as advertised, works fine, seems strong enough - though time will tell. Arrived in good time, as predicted.
by: Don S.03/06/2017
This clamp on hitch receiver arrived in only a couple of days although I live in Southern Ontario Canada. The finish and welding on this product are excellent. I will use it for attaching a bike rack to the rear bumper of our new travel trailer. I purchased the bike rack some months ago from etrailer. That was also very good customer service experience.
by: Dave 05/14/2020
Just right to add a bike rack, not load rated to add a trailer.
Would prefer locking nuts, but easy to find at hardware store.
by: Gareth M02/21/2017
This hitch was the perfect way to mount my bicycle rack to the rear of my trailer. We have used it several times in the last year with no problems. It was easy to install.
by: Fred B.06/20/2016
Perfect for my new RV. I like the all black finish, bolts included, that goes well with the black bumper. It will be used for a two bike carrier and looks to be rugged enough, I'm sure it is, and time will tell. I think it will be great.
by: Elwood07/25/2015
Received the product and installed it today - easy installation. I have another hitch receiver that I bought years ago, but it's at our home in Florida and we're currently in Ohio. This one is much better quality, but also cost over twice as much. While we won't be leaving to head home for a month, I foresee no issues with this receiver handling the bike rack and two bikes.
by: Jeremy06/01/2020
Been using this for a year on our camper bumper for bike rack. So far so good!
by: Charles S.12/06/2015
Bolt-on 2" receiver for bike rack on RV bumper. Wow! Excellent quality, super construction, welds & finish, easy install. AND fast delivery. Thank you etrailer!!
25
123
Show More Reviews
See what our Experts say about this Swagman RV and Camper Hitch
- Swagman Platform Bike Rack Recommendation for Use Behind an RVThe Swagman XTC2 Bike Rack part # S64670 is a great rack, the only problem is that it is not designed to work at the back of an RV or trailer. The ride quality at the back of an RV is much rougher than the back of a passenger vehicle. Because of this only certain racks have been designed to work there. For a similar rack that would work at the back of an RV (and actually this comes with the # S64025) you would want the Swagman Platform-Style 2 Bike Rack # S64663. This rack has been confirmed...
view full answer... - Could Swagman RV Bumper Mount with Hitch Opening Vertical for Carrying FlagThere's no reason you couldn't mount the # S64025 in a vertical position to use it like you are wanting to.
view full answer... - Can E100 RV Bumper Trailer Hitch Receiver Mount on Top of BumperI spoke with my contact at Curt and she said the Curt RV Bumper 2" Trailer Hitch Receiver # E-100, is designed and tested to be installed with the receiver on the bottom of the bumper and due to stress and functionality is not designed to be used on top of the bumper. Although the receiver is rated at 3500 lbs towing and 350 lbs of tongue weight, you will need to check the RV owners manual for the capacity of the bumper. If the capacity of the bumper is less than 3500 lbs or 350 lb of...
view full answer... - Hitch Options for Carrying Bikes on Rear of 1989 Prowler Travel TrailerSince all the RV bumper hitches we offer only fit up to 4 inch bumpers, your best bet would be to go with a frame mounted hitch. The hitch you need will depend on the outside-to-outside dimension of the frame members under your travel trailer. If the outside to outside width is between 22 and 72 inches, the Curt # 13703 would be an excellent choice that has a tongue weight capacity of 350 lbs. If the outside frame member to frame member distance is less than 22 inches, the Curt # C13701...
view full answer... - Trailer Hitch that Mounts to the Frame of a 5th Wheel TrailerYou can put an RV trailer hitch on a 5th wheel trailer. For a frame mounted hitch the most versatile is the Curt hitch # 13703. This hitch fits frame frames from 22 to 72 inches wide (frame width is measured from the outside of one frame rail to the outside of the other frame rail). It can be used on box frames, I-Beam frames, and C-Channel frames. And it can be bolted or welded on. Welding should be performed by a professional welder. I have included a link to the installation instructions...
view full answer... - Weight Capacity Of RV Bumper Mounted Hitch ReceiverThis Clamp-On RV Bumper Hitch Receiver, part # S64025, is constructed of solid steel and designed to fit 4 inch by 4 inch bumpers. Its load capacity is 200 lbs which should be plenty strong to hold two bikes and the weight of the bike carrier. You will want to check with the RV manufacturer to make sure you never exceed the bumper weight capacity on your RV. This receiver should not be used with aluminum or spot welded bumpers. It is not designed for cargo carriers or for towing. I have...
view full answer... - Trailer Hitch Options for a 2008 Fleetwood Avalon Pop-Up CamperFrame mounted trailer hitches are always a more secure option over bumper mounted hitches and typically have higher towing and tongue weight capacities. Before you install a trailer hitch on your 2008 Fleetwood Avalon pop-up camper, I recommend contacting Fleetwood to see if they have a recommended towing capacity for your camper. I know many trailer manufacturers do not recommend towing a trailer behind another trailer for safety reasons and some pop-up campers are not even rated for towing. We...
view full answer... - Trailer Hitch Receiver Compatible with Chalet LTW A-Frame Camping TrailerBolt on RV hitch receivers are all designed for 4x4 inch bumpers so you will need to check with the manufacturer of your bumper to confirm it is rated for the that kind of application. It is likely they will say it is not rated for that use and then I recommend using a hitch like # C13704. If it is, then I would use the RV Bumper 2" Trailer Hitch Receiver - Clamp-On # S64025 along with a metal spacer to stabilize the hitch. Then use the Swagman Original - 3 Bike Rack for 2" Trailer Hitches...
view full answer... - Bumper Mounted Hitch That Will Work With Roadmaster Hitch Mounted Spare Tire CarrierThere is a hitch that will work for you, but the Bumper Hitch Receiver # S64025 that you referenced is for use with bike racks and would not be a fit for your new Roadmaster Spare Tire Mount RM-195225. Instead, I recommend the Ultra-Fab # UF35-946402 which is a 2" trailer hitch receiver that clamps onto 4" x 4" square bumpers and has a maximum tongue weight of 350 lbs, which should be well within the range of the Spare Tire Mount and spare tire. I've added links to a pair of video reviews...
view full answer... - Weight of Swagman Bike Rack for RV Bumpers with Bumper AdapterThe Swagman Platform Rack for 2" Hitches of RV Bumpers # S64663 weighs 36.1 lbs. The RV Bumper 2" Hitch Receiver Adapter # S64025 weighs 9 lbs. The total weight for the rack and the bumper adapter is 45.1 lbs. I attached videos below reviewing the bike rack and showing how to install the bumper adapter if you want to check them out. With this bike rack, I recommend upgrading to the anti-rattle hitch lock # S64030 so you can lock the bike rack to your vehicle. When using the bumper adapter,...
view full answer... - Spare Tire Holder for 4-1/4 Inch Bumper on 1984 Fleetwood Prowler CamperStromberg Carlson offers a spare tire carrier that is compatible with a 4-1/4 inch square bumper, part # TR-2. According to my Stromberg Carlson rep, the carrier is compatible with a 5 lug 4-1/2 inch bolt circle.
view full answer... - Can the Roadmaster Dual Hitch Receiver Be Used to Tow a Trailer and Carry Bike On a Bike RackThe Roadmaster Dual Hitch Receivers, like the # RM-077-4 that you referenced, are not designed for use with any type of trailer. They are designed for use with tow bars only. I recommend installing a hitch on the back of your RV. If your RV has a 4 x 4 inch continuous-welded steel bumper, you could use the RV Bumper 2 inch Trailer Hitch Receiver, item # S64025, along with a bike rack that is designed for use behind an RV. The Swagman Dispatch Bike Rack, item # S44FR, would be a good choice. If...
view full answer... - Hitch Options for a 1982 Dodge RampageFor your vehicle I believe your best option for installing a hitch would be to contact a qualified fabricator and have them custom fabricate a hitch. The hitch you referenced is more for RV bumpers that are 4 inch by 4 inch and would not be ideal for you, in fact it probably wouldn't work at all.
view full answer...
- Bumper Mounted Hitch Recommendation for RV to Carry a 75 lb Spare TireThe Swagman Specialty Trailer Hitch # S64025 that you referenced has a 200 lb capacity so it would be strong enough to handle the weight of your spare tire, but it is designed only for use with bike racks so although it would seem to work for you, I cannot recommend it for you. For a similar hitch that would work for what you are trying to do you would want the part # UF35-946402 . For a spare tire carrier you would then want the # C31006 as it would also have a high enough capacity for...
view full answer... - Can Swagman Bumper Mount Adapter Mount Underneath BumperI spoke with my contact at Swagman and was informed that the RV 2 inch Receiver Bumper Mount Adapter, # S64025, cannot be mounted underneath of the bumper because the bolts included with the receiver are not designed to handle the tongue weight required of it in that position. One option we have for mounting a receiver under the bumper of your camper is the RV Bumper 2 inch Trailer Hitch Receiver, # E-100. However, you cannot exceed the limits of your camper bumper. The bumper towing...
view full answer... - RV Bumper Mounted Trailer Hitch that has the Receiver On Top of the BumperI can only recommend installing Curt hitch # E-100 according to the instructions which show it positioned with the receiver on the bottom. If you want to use a hitch for an accessory and not for towing then there are other options that place the receiver on top such as # S64025 which is rated for 200 pounds or # UF35-946402 rated for 350 pounds.
view full answer... - Can Swagman Trailhead Bike Rack Carry Womens BikesTo use a womens bike with the Swagman Trailhead part # S63381 all you need is an adapter bar like part # UB01. This adapter attaches to the seat post and the steering stem of the bike to provide a horizontal attachment point so the bike can be carried level. I attached a review video for this for you to check out as well. The Swagman hitch part # S64025 would be a perfect solution for you as it is designed to work with the bike rack you referenced and attach to 4 inch square bumpers.
view full answer... - Hitch Recommendation for 2003 Newmar Kountry Star Class A MotorhomeWe offer both frame-mount and bumper-mount trailer hitches for use on the rear of a motorhome like your 2003 Newmar Kountry Star Class A. The bumper-mount hitch you referenced, Swagman # S64025, is intended for bumpers that are continuously-welded across their entire length. This hitch can be used only with an RV-approved bike rack. It cannot be used for towing or with cargo carriers. The link provided will let you see all available bumper- and frame-mount RV hitches. For a frame that...
view full answer... - Recommendation for Transporting 3 Bikes with Forest River Flagstaff with Spare Tire I do have an option for you, however none of our traditional spare tire mount bike racks including the Malone # MPG2148 and the Hollywood Racks # HRSR1 that you were looking at are rated for use by the manufacturer to be used at the back of a trailer. This is simply because the manufacturer has deemed that they aren't fully capable of handling the extra movement and bounce that they would need to withstand in this application. The best option we have available is with the Swagman Around...
view full answer... - Recommendation for a Bumper Mounted Trailer Hitch for an RV, Trailer, or MotorhomeIt sounds like the Stromberg Carlson 2" Motor Home Hitch Receiver, part # BA-100 would be your best bet. This receiver will fit bumpers up to 4 by 4-1/2 inches. This receiver is designed for mounting accessories like a bike rack, and not for towing purposes. It has a 200 lb capacity. You will want to make sure your bumper is rated for this application and do not exceed the capacity of the bumper or hitch, whichever is lower.
view full answer... - Bike Carrier for Use on the Back of a Jayco Travel Trailer with 4 Inch BumperThere are only certain bike racks that are rated for use on the back of an RV or trailer. You would need to contact the bike rack manufacturer to ask if your model is rated for that application. If it is not then we do have several options that will work. I have included a link to all of the racks that are rated for use behind an RV or trailer. There are also racks that attach directly to the bumper such as # S80605 and # S80501 provided the bumper is steel, fully boxed, and welded its...
view full answer... - Rack with 4 Bike Capacity Needed for Rear of a Salem RVWe do offer bike racks that can utilize the ladder on the rear of the trailer, like the Stromberg Carlson 2 Bike Carrier, part # LA-102. Unfortunately, these racks only have a two bike capacity. Depending on the size and construction of the rear bumper, a bumper mounted receiver like the Swagman part # S64025 would be a good option for a 4 x 4 inch continuous-welded steel bumpers. This receiver is not compatible with aluminum or spot-welded steel bumpers. Using a bolt on receiver would...
view full answer... - Recommended 4 Bike Rack to Use With RV That is Towing a 2017 Jeep Wrangler UnlimitedI have a solution for you, but the RV Bumper Hitch Receivers, like part # S64025, are only compatible with the square bumpers like the one in the attached picture. The problem with a dual hitch extender (or any hitch extender), like part # MPG544, is that it reduces the weight capacity of your trailer hitch receiver by 50 percent, so you might not be able to continue to tow your 2017 Jeep Wrangler Unlimited. The Saris MHS Bike Rack for 4 Bikes - 2" Hitches - Wheel Mount # SAR95MR, is an...
view full answer...
- Can Bumper Mounted Trailer Hitch Be Used To Pull Tow Dolly Loaded With A VehicleIf you use a bumper hitch like part # S64025 on your RV, it needs to have a bumper that has a continuous weld and not just in two places on the frame. I recommend using a motor home trailer hitch like part # 82201. This bolts or welds to the frame of your RV and provides a 2 inch receiver opening at the back of your RV. This hitch adjusts from 47 to 71 inches wide and has a gross towing capacity of 3,500-lbs. Since you plan on doing some towing you might be interested in etrailer ball...
view full answer...
Do you have a question about this RV and Camper Hitch?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Sarah L
Expert Research:
Robert G
Expert Research:
Patrick B
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Expert Research:
Jeffrey L
Video Edited:
Jacob T
Video Edited:
Zach D
Video Edited:
Jonathan Y
Updated by:
Adele M
Updated by:
Matthew S
Updated by:
Jenny M
Installed by:
Cole B
Installed by:
Randy B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Kevin
6/18/2021
The receiver itself is great. I still have it on my camper. My campers bumper on the other hand was not up to the task of stress that a fully loaded 4-bike rack put on it. The bumper could probably handle 1 or 2 bikes just fine but the rack I have puts too large of a moment on the thin wall square tube bumper.