RV Bumper 2 Bike Rack
(66 reviews)
Price: $115.00
In Stock
RV Bumper 2 Bike Rack
Item # S80605
Retail:$161.28
Our Price: $115.00
You Save: $46.28
This item qualifies for Free Shipping
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (66)
- Q & A (0)
- Photos
Swagman RV and Camper Bike Racks - S80605
- RV Bumper Rack
- Motorhome
- Travel Trailer
- Fifth Wheel
- 2 Bikes
- Mountain Bikes
- Road Bikes
- Womens Bikes
- Platform Rack
- Swagman
The popular wheel mounted bike rack is now available for your RV bumper! Simply secure the steel U-Bolts provided with the rack to your bumper. The upright bar in the center of the rack gives added support to your bikes while towing.
Features:
- Carries up to 2 bikes (30 lbs per bike)
- Steel construction
- Tire rails support several sizes of wheels and frames
- However, both bikes need to be of similar length
- Upright bars add additional support for bikes
- Powder-coated to resist corrosion
Specs:
- Built for continuous welded steel square bumpers at least 4" and no more than 4-1/2" wide
- Not for use on aluminum or spot welded bumpers
- First bike sits 6-1/4" out from bumper
- Each platform: 20" O.D.
- Extends 19" out from bumper
- Upright bar: 19-1/2" high
- Wheel Loops width: 2-3/4"
- Limited lifetime warranty
This reliable mount rack is constructed with steel and carries up to two bikes. Built for 4" to 4-1/2" continuous welded steel square bumpers, this rack is simple to attach and easy to use. The tire rails support several sizes of frames and wheels.
80605 Swagman RV 2-Bike RV Bumper Mount Rack
Installation Details
Customer Satisfaction Score:
93% were satisfied with this product
7% of customers were not satisfied
- Wrong item was ordered
- etrailer mistake
- Received too many
Customer Reviews
RV Bumper 2 Bike Rack - S80605
Average Customer Rating: 4.4 out of 5 stars (66 Customer Reviews)
The popular wheel mounted bike rack is now available for your RV bumper! Simply secure the steel U-Bolts provided with the rack to your bumper. The upright bar in the center of the rack gives added support to your bikes while towing.by: Gary Williamson, Yuma, Arizona06/30/2023
The bicycle rack mounted easily by myself without help from another person. It is very strong and holds our two bicycles just as I had hoped. I slipped a pool noodle over the upright support bar to prevent scratching the inside bicycle. The only thing I can suggest is that the product would have been better if it included the cover for the upright support pole and some strapping material to keep the bicycles solidly in place while traveling. The strapping material is not a big priority for me though because I have lots of it.
by: Kevin 03/18/2024
This was a great compromise in cost, ease of install and use.
Easily attached to the bumper (and saved cost as I didn't need to install a hitch on the RV).
Bikes went in well, but needed to use pool noodles to insulate the bikes from each other and from the central pole. (Will switch to more sturdy pipe insulation next time). Add some bungies and velcro straps (to hold the wheels) and you're all set.
Held our 2 mountain bikes flawlessly over our 8,000 mile road trip last summer.
by: Timothy07/25/2023
Cannot slide the two sections far enough apart so that both bike wheels will fit into their respective slot. When mounted the ends of the rack stick past the bumper on the vehicle side too far. This means that the ends are sticking into the cut out for the RV back wall above the tow hitch which limits moving the sections further apart. Also an improvement could be made by having a hinge that would allow for lifting the rack in an upright storage position.
by: Steve03/15/2018
It's been just over a year tha I purchased my Swagman two-bike rack for my 5th wheel. The customer service I received form "etrailer" was exemplary. I had questions about the size and my CSR actually called the manufacturer got the answer and called me back! The rack was an easy mount requiring one wrench, two hands and about ten minutes. It's sturdy, looks great and functions flaulessly! Although it isn't a suggested procedure, at 265 pounds I stand on mine to wash my back window. Of course I stand close to the bumper and not on the outter edge, but my point is, it's a very sturdy unit and is at a great price point. If you need a rack look no further than, etrailer and Swagman!
Steve
3/15/2019
Ive sold my 5th wheel and the bike rack but the new owner loved the rack. My experience with the rack is I cant imagine a rack being easier to install, more sturdy for the price point or in general a great piece of equipment.
by: Mark S.08/19/2017
Bike rack was exactly how it appears. Quality material of construction for what it is. Total time to assemble, about 20 minutes. Had a question about shipping time, got a quick response from George at etrailer. Bike rack actually came in earlier than scheduled date.
by: Stuart 04/06/2023
Nice rack for the money, easy install, looks good on the rear bumper of the motor home. One item of caution....be sure that when performing a sharp turn in the motor home, that the bike rack does not hit the tow vehicle if in fact a vehicle is in tow. I checked this for clearance before I went on the road
by: Bill 12/13/2019
So far so good, using it to mount a generator to the rear bumper of our 5th wheel. Have not had her on the road yet, so I'm not sure how it will hold up. It feels very secure so I'm feeling good that it will hold up.
Bill
12/14/2020
Bike rack working great,Ive been using it as a generator platform on the rear of my 5th wheel.
by: Eric K06/02/2016
I ask for information on the bike racks that would fit my rv and they answered all my questions. My order arrived sooner than I thought and I installed it last nite and it will work fine. I am planning on sending pictures.
Thanks to all
Eric K.
6/2/2017
The rack is great, just what I wanted. I recommend this to all the campers I meet with bikes.
by: Lawton DeRosset 07/19/2019
It is a beautiful piece of equipment ever made to transport bikes on the rear of a rv
by: Anna07/13/2022
I can’t really offer much on this as we haven’t used it. We were told the camper bumper isn’t strong enough to hold the weight. It will require some additional welding to the frame. Wish we had waited to purchase this unfortunately.
Katrina B.
7/19/2022
This rack is built for continuous welded steel square bumpers at least 4 inches and no more than 4.5 inches wide. This is not built for use on aluminum or spot weld bumpers. We do recommend checking with your trailer manufacturer to make sure that the factory bumper can support the weight of a loaded rack. This rack has a weight capacity of 70 lbs and the rack itself is roughly 20 lbs. If you are looking for something that does not require additional welding, then you might want to look into getting a universal hitch, like part # C13701, along with an RV rated bike rack, like part # S44FR.
Katrina B.
7/25/2022
This rack is built for continuous welded steel square bumpers at least 4 inches and no more than 4.5 inches wide. This is not built for use on aluminum or spot weld bumpers. We do recommend checking with your trailer manufacturer to make sure that the factory bumper can support the weight of a loaded rack. This rack has a weight capacity of 70 lbs and the rack itself is roughly 20 lbs. If you are looking for something that does not require additional welding, then you might want to look into getting a universal hitch, like part # C13701, along with an RV rated bike rack, like part # S44FR.
by: Don H.09/05/2018
Great price for a simple but effective bike rack. Have used it on the back of a 5th wheel RV, and overall it works well. Installation was very easy, be sure to adjust the position of the two pieces to fit your bicycle footprint. I just used some creative bungee cording to hold the bikes in place at the wheels and to the vertical pipe. The bikes are held firmly in place with very little movement.
My only real issue is with the vertical support, and its lack of adjustability. In my case, the bikes would lean towards the RV, with the handlebar hitting the glass window because it was so close. I attached a 2x4 spacer to the vertical support to position the inside bike straight up, and that took care of the issue, but it would be nice if there was some way of adjusting the bar.
Also, kudos to etrailer, for their great support. Delivery came early, and product was in great shape. I've used Etrailer before, and will continue to.
by: Scott10/21/2020
I bought not as a bike rack, but as a platform to bolt a couple large storage contains on the back of my camper. My regular hitch style bike rack fits right between...worked great. I've been using it for one year now...no problems.
by: Ken H.04/05/2012
Everything went great from the git go, the rack was at my front door the day I was told that it would arrive. The installation was a snap; it took about 15 minutes to complete, the only tool you need is a 9/16" wrench. The loading of the bikes are quick and easy, much better than hauling them in the bed of the pick up, which took a lot of time trying to strap them so they would not get damaged during the trip. Today was my first trip with the bike rack, I hauled 2 mountain bikes for 75 miles with no problem or damage to the bikes. Great product!
by: William S.06/13/2011
I recently purchased the RV Bumper 2 bikeRack from etrailer.com. I received my purchase in a timely fashion and found the item to be well made and easy to install on the back of my View Finder travel trailer. I used it for the first time this past week to transport my wife's and my own mountain bike on our scheduled getaway to Astoria. It functioned flawlessly. The bikes were easy to load and unload and were secure during transport. I strongly recommend this product.
by: Ted N.05/22/2012
Bike Rack arrived in minimum time and was exactly as described. Have not installed yet, since I need to relocate the spare tire on my camper. I will use it in the same area as the spare tire.
Peggy S.
10/22/2014
where are you going to put the spare tire
Ted N.
10/23/2014
I have now used the bike rack for two years. Many people have asked about it. I had my dealer move my spare tire underneath my fifth wheel behind the front battery storage area. He added a cable hook up to lower and raise the spare tire. Very similar to how spare tires are mounted in trucks. He did it for less than $100 .
by: Kenneth Fish03/01/2012
Fits and holds bikes very well, 4 inch bumper - they need to add more support for the upright bikes, they hit rear of trailer.
John A.
3/20/2014
I agree, they should include two uprights. I ordered a 2nd one from Skagman, around 30 bucks with shipping.
by: Roger H.07/27/2016
Excellent product. Easy to install. Very fast service from etrailer.com.
Roger H.
7/28/2017
Great product! Holds the bike well. I never concern myself with the safety of the bikes while using this rack.
by: Jack 07/26/2022
We put a bike and ramps on there to go from ct to fl worked great! Sturdy. Thanks
by: Vickie A.06/16/2016
Ordered the bike rack on a Tuesday afternoon, UPS delivered the rack the following Thursday morning. The quality of the frame work is very sturdy. Excellent product. We installed the bike rack with no problem. I had looked for several months for an rv bumper bike rack and could not find one that we thought we would like or would work very well. My husband ran across this web site as he looked for a rack. We are very pleased......and gald we ordered from etrailer.com. We will do business again with them if ever needed. Could not take pictures, as I do not have a cell phone that can do that. Still old school......
by: Randy T.08/29/2015
I am very well pleased with my purchase of the 2 bike rack, It was easy to install. Just what I was looking for. The rack allowed me to free up that space in the back of the truck. Ordering was easy, and delivery was quick. Thank you.
by: Richard09/02/2021
A total piece of junk! Does not secure even one bike to the rack. If you used this product your bikes would not be there when you stopped. I wasted my money.
by: Josh R.08/17/2016
Seems like a great product. Easy to install with just a few basic hand tools. I had my 6 yr old daughter help me hold them in place while putting the U-bolt through but could be done with just one person. These are a little tricky if you have the rear bumper mounted tire carrier.
by: Chuck B.09/24/2016
This bike rack has great flexibility for any size bike. It could use some eye bolts for tie-downs, but it assembled easily.
by: Terrell07/23/2018
Very happy with this product. It was lightweight, yet strong enough to carry both bikes. Super easy to install! Would recommend it for anyone with a square tube style rear R/V bumper.
by: Mike M.06/19/2015
Very easy to install. However, I believe an additional stabilizer bar should be added with an additional bar between the 2 stabilizer bars to make it easier to secure the bikes.
25
66
Show More Reviews
See what our Experts say about this Swagman RV and Camper Bike Racks
- Can the RV Bumper 2 Bike Rack Be Used Around a Spare Tire on a 20 Foot Jayflight Travel TrailerThe RV bumper bike rack # S80605 would be a great choice for your tent trailer, because it offers an easy install and will accept many different styles of bikes. As long as your spare tire does not extend past the face of the rear bumper on the trailer you should have no problems mounting the carrier and installing your bikes. This bike rack is made for continuous welded steel square bumpers at least 4 inches and no more than 4-1/2 inches wide. The only thing you should note is that the...
view full answer... - Swagman RV Bumper 2 Bike Rack on R-Pod With Spare TireYou will probably need to relocate the spare to mount the Swagman RV Bumper 2 Bike Rack, # S80605.
view full answer... - Bumper Compatibility for Swagman S80605 RV Bumper Mounted 2 Bike CarrierI don't have a listing of what specific bumpers the Swagman # S80605 Bumper Mount 2-Bike Carrier will fit, however you can easily determine that by examining and measuring your existing bumper. The # S80605 rack fits continuously welded steel bumpers that are 4 or 4-1/2 inches square. If the bumper is aluminum or is spot welded, the fear is that the bumper could be deformed by the force applied to it by the U-bolts that attach the rack to the bumper. If your bumper doesn't meet those...
view full answer... - Will This Bike Rack Work with My Tandem Bicycle on RV Motor Home BumperIf your RV or Motorhome bumper is wider than the tandem bicycle then the Swagman RV Bumper 2 Bike Rack, part # S80605, will work. If you do not already have something to secure your bikes to part # S80605, then you may need the 10 foot Cable Lock, part # e98891. You will need to check with the RV manufacturer to see how much weight the bumper is rated to hold. You will need to calculate the weight of the bike rack plus the weight of the tandem bicycle. Tandem bicycles tend to be heavy...
view full answer... - How are Bikes to Be Mounted to the Swagman RV Platform Rack Part S80605The Swagman RV Bumper Rack, part # S80605, is designed to be used with ratchet straps or some sort of tie-down. There is not any sort of clamp system that is supposed to be used on the upright. It is there to provide another location for using which ever tie downs work best for you.
view full answer... - Will this RV Bumber 2 Bike Rack, part # S80605, Obstruct the Visibility of my RV Tail LightsIf you used the RV Bumper 2 Bike Rack, part # S80605, there is a chance that your tail lights would shine through the spokes of the wheel allowing them to be visible, and therefore safe and legal. What I would recommend you do, is hitch up your trailer to your towing vehicle and have a friend hold a bike with the bottom of the wheels as high as the top of your bumper to simulate where the bike would be if you had this rack mounted with bikes on it. Next, have another friend activate your...
view full answer... - Will the Yakima Hangover work on my Fifth Wheel?I have a couple of options but unfortunately with the way the Yakima HangOver 4 Bike Rack part # Y02484 hold the bike it isn't going to work for your Shuffles. One other thing to keep in mind is that you want a bike rack approved for use on the rear of a 5th wheel which the Hangover is not. Instead the Swagman 4 Bike Carrier RV Mounted Bike Rack part # S80600 or the 2 bike version part # S80605 would be the way to go. This would allow you to transport them on an approved rack. I lean towards...
view full answer... - Bike Rack and Mounting Options and Recommendations for a 1989 Winnebago LesharoThe bumper mount racks, like the RV Bumper 2 Bike Rack, # S80605, require a 4 to 4-1/2 inch square, welded steel bumper. If your Winnebago does not have this size and type of bumper, the best solution is to add a trailer hitch and hitch mount rack. If it does have this style bumper, make sure you check the owners manual for the capacity of the bumper to be sure it can support a rack and bike. If you need to use a trailer hitch, I recommend a frame mount hitch for more stability and weight...
view full answer... - Tandem Bike Rack Recommendation for Rear of MotorhomeIf your motorhome has a 4 inch continuously welded rear bumper the only solution we have for a tandem bike rack would be the Swagman bike rack part # S80605 as you could space out the trays of the rack so that it would fit each wheel well.
view full answer... - Need Towing Mirrors for 2011 Jeep Grand Cherokee and Bike Rack for 2012 Rockwood Mini-Lite TrailerWhen it comes to towing mirrors for your 2011 Jeep Grand Cherokee Overland, take a look at the K-Source Universal Clip-On Towing Mirror, # KS3891. This will fit mirrors 4-1/2 to 11-1/2 inches tall and mounts on either of your factory side mirrors to expand your view of the road and your trailer. As for a bike rack that will mount to the bumper of your 2012 Rockwood Mini-Lite Trailer, check out the Swagman RV and Motorhome Bike Rack, # S80605. This bike rack is built to be used with 4 to...
view full answer... - Bike Rack to Carry Tandem Bike at Rear of RVThe only solution we have for carrying a tandem bike at the rear of an RV would be the RV bumper bike rack part # S80605. Only issue you'd have would be that to space the rack to allow a tandem bike to fit would be too far for a standard bike to be carried as well. I attached an install video for this for you to check out as well.
view full answer... - Options For Transporting 3 Bikes On A 2019 Nissan NV2500 Pulling A CamperIn order to install a bike rack on the back of your 2019 Nissan NV2500 when pulling a camper, you could use Stromberg Carlson Bike Bunk Trailer-Mounted Bike Rack Carrier for A-Frame Trailers # CC-275. This mounts to the tongue of A-Frame trailers with widths between 12" - 52". The mounting bracket dimensions are 8" tall, 4-3/4" wide, and 2" deep; so you will want to compare this to your trailer to determine compatibility. You can add a 2-bike rack to this bike rack carrier such as Swagman...
view full answer... - How to Attach Bikes to the Swagman RV Bumper Bike RackSwagman recommends bungee cords like # EM06623 or ropes be used to attach the bikes to the upright bar on the rack. I would also recommend securing the wheels to the bottom portion of the rack. This rack is meant to be used with bikes of many different sizes and configurations, securing the bikes to the rack is going to depend on the size and frame configuration of the bike. Determining the best way of securing the bike to the rack is left to the user.
view full answer... - Are Trailer Bumpers Rated for Weight of Bumper Mount Bike Rack Before mounting a bike rack like the Swagman RV Bumper 2 Bike Rack # S80605 it is always a good idea to check with the trailer manufacturer to make sure that the factory bumper can support the weight of a loaded rack. Bike racks like this are designed to be mounted to continuous welded steel square bumpers that shouldn't have a problem supporting this kind of weight but it is still up to the trailer manufacturer. There is no universal guideline regarding a trailer bumper's ability to...
view full answer... - How to Determine If Swagman RV 2-Bike RV Bumper Mount Rack is Right For Your ApplicationMany RV bumper manufacturers construct their product with a plastic cap or a hinged door instead of endcap, allowing bumper to be used for storage; apparently you have this type. Open that end piece to examine if the seam has spot welds (short welds at a number of separate points) or one continuous weld running the full length of the bumper; take note of the thickness of the metal while doing so. Some bumpers, frequently identified as heavy duty, will not have a weld seam at all but are...
view full answer...
- How Much Does the RV Bumper 2 Bike Rack # S80605 WeighThe shipping weight of the RV Bumper 2 Bike Rack, part # S80605 is 25 pounds, so the rack will weigh slightly less without the shipping packaging.
view full answer... - Tandem Bike Rack Recommendation for Fitting on 4 inch Square Bumper of Camper TrailerWhat you would need is the RV Bumper Bike Rack part # S80605 to attach to your 4 inch bumper. Since the two sections of the rack can be spaced wherever needed on the bumper you would just need to space the rack so that the wheels of your tandem bike line up.
view full answer... - Distance from Bumper to First Bike When Swagman RV Bumper Bike Rack S80605 is InstalledThe first dimension you mentioned of 6-1/4 inches will be the distance from the rear bumper where the Swagman RV bike rack part # S80605 attaches to the center of the first bike slot. You'll want right at 2 inches of clearance between the bumper and the rear wall of the trailer to allow the U-bolt and rack to clear.
view full answer... - Will a Bike Loaded on Swagman RV Bumper Mount Bike Carrier Make Contact with Back of CamperThe first bike sits 6-1/4 inches from the rear most part of the bumper. Then another couple of inches to the center of the first wheel cradle. And you would have to add the width of the bumper and the distance, if any, from the forward edge of the bumper to the body of the trailer. So let's say that the bumper starts 2 inches from the back of the camper, the bumper is 4 inches, and the center of the bike is 9 inches from the bumper. Add it all up and you get 15 inches. If the bike width...
view full answer... - Bike Rack Availability for a Lesharo RVSounds like you are looking for a bike rack for your Lesharo RV. We can definitely help you with that. If you have a 4" to 4-1/2" continuous welded steel square bumper the part # S80605 that you referenced would fit and work well. Check out the review video I attached for more info. I also attached a link to a page that has all of the RV rated bike racks we carry, if you don't have a steel bumper on your RV check out all the different style we do carry to see what would work best for you.
view full answer... - Bike Rack Recommendations for Use Behind a 27 Foot 2005 Hornet Trailer Pulled by a Ford F-150I have a few possible solutions for you. First, if your 2005 Hornet trailer has a trailer hitch, I recommend the Swagman XC, # S64650. This is a platform style rack rated for use behind a trailer. The bikes are secured at the two wheels and the frame for maximum stability. I have included a link to the installation details and a video review of this rack below. If you do not have a hitch and want to use a hitch mount rack, you can install a hitch. I have included a link to our specialty...
view full answer... - How Easy is it To Mount and Remove the RV Bumper 2 Bike Rack #S80605For the average individual, I would say that it is fairly easy to remove the RV Bumper 2 Bike Rack, # S80605. You would be removing 8 bolts total on the three piece rack. The two larger sections probably make up the bulk of the weight. The entire unit only weighs about 24 pounds. So with the right tools and about 5 minutes tops, you could have the rack off the bumper and placed out of the way. It would probably take longer to put the rack on the bumper unless you had a helper. But again,...
view full answer... - Can Bikes be Centered on RV Bumper Bike Rack S80501 on Trailer with Off-Center Spare TireHow far off-center is the spare tire? You can push the bikes as far as they can go when on the rack to help compensate for the off-center spare but that is only going to be a few inches. I recommend going with RV bumper rack # S80605 because the 2 halves of this rack are not connected so you would be able to position the rack so that the bikes are more centered. I have linked a video review of this rack for you.
view full answer... - Cargo Carrier that Can Mount to the Front of a 2017 T@B Travel TrailerI know that some of those T@B trailers come with or have an optional storage tray on either side of the propane tank like what you are describing. I do have something that will potentially work for you though it is not exactly the same. Take a look at the Stromberg Carlson Trailer Tray cargo carrier # CC-255. This carrier mounts to the A-Frame and holds the tray up over the propane tank. The tray is 32 inches across and 20 inches front to back. I have linked a video review for you.
view full answer...
Do you have a question about this RV and Camper Bike Rack?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Sarah L
Expert Research:
Robert G
Expert Research:
Patrick B
Expert Research:
Michael H
Expert Research:
Reno H
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Lori W
Video Edited:
Zack K
Video Edited:
Chris R
Installed by:
Matthew K
Installed by:
Adam E
Video by:
Dustin K
Updated by:
Wilson B
Updated by:
Matthew S
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Jenny N.
7/28/2023
It is possible that this might not be the bike rack for you. How wide are your tires? Would you be able to send a picture of your bikes on the rack?