Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Getting in and out feels steady with the built-in landing gear that keeps the bottom step planted on the ground. Each leg adjusts independently, so you can fine-tune the height for uneven surfaces. Large rectangular footplates keep the steps level and stop them from sinking into soft ground, giving a solid connection underfoot.
Each 20" wide x 8" deep aluminum step has built-in SureGrip tread for secure footing even in wet conditions. Glow tape along the sides charges in just 5 minutes of light and glows for up to 10 hours, lighting every step so you can come and go safely after dark.
The aircraft-grade aluminum steps are durable and rustproof, supported by stainless steel hinges bolted together for easy removal or replacement of individual steps. Bushing bearings make the scissor action smooth and long-lasting compared to standard riveted joints. With a 325 lb weight capacity, these steps hold steady without flexing.
When it’s time to roll, the steps collapse and fold into the white powder-coated steel mounting bracket. The bracket locks them securely in place, eliminating the need to remove or store them inside. A retention strap keeps them stowed tight and rattle-free, and you can add a TorkLift pin lock (sold separately) for extra security.
These 6-step scissor stairs are designed for entry heights between 46-1/2" and 58". The 7-1/2" rise between steps feels natural, and the 23" wide x 19-1/2" tall mounting bracket provides a solid connection point. No assembly is needed—the landing gear comes pre-installed and ready to use.
| Entry Height | 23" Mounting Bracket Width |
|---|---|
| 23-1/2" - 34-1/2" | TLA7843, TLA7833 |
| 31" - 42" | TLA7844, TLA7834 |
| 38-1/2" - 50" | TLA7845, TLA7835 |
| 46-1/2" - 58" | TLA7836, TLA7846 |
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today we're going to be taking a look at the TorkLift GlowStep Stow N' Go scissor steps with landing gear. This comes with six steps and a white bracket.Now the biggest advantage to your GlowStep Stow N' Go is the height that's going to be available for your in bed, truck camper. So a lot of times there's a big gap between that camper door and the ground, this is going to take up that gap and provide a really strong connection between your camper and the ground. As you can see, even with it just propped up here, it's really not moving around too much, these are really solidly built.They are made of an aircraft grade aluminum, so they're going to be lightweight, but also very durable. It's also nice because we're not going to have any rust issues, you don't have to worry about them creating a mess in your camper over time. Again, they're going to be pretty lightweight, so it's not going to be too hard to get those collapsed up whenever you're ready to travel, or expanding them out.Whenever you are ready to travel, these are going to secure with a little rubber strap here on the bracket as you can see there.
So basically, you collapse it up, there are two pegs here, you're going to bring that rubber strap over those pegs and that's going to keep it all nice and sandwiched together. So you don't have to worry about removing the steps every time you're ready to travel, they can just stow right on the outside of your camper, so that's one less step to worry about there.They do come with the landing gear already attached. That's this little black foot down here at the bottom, it has a nice wide rectangular foot with some little rubber pads. So it's going to provide a good anchor point for that last step there. Those are adjustable up and down, so if you're on uneven terrain, you can adjust that to suit the height that you need.
Those do come pre installed, so you don't have to worry about getting these installed on there yourself. It is just a little spring retention inaudible 00:02:03 to get that installed in or out. It just snaps right there into the hole wherever you need. They are inde-(silence).
Customer Satisfaction Score:
88% were satisfied with this product
12% of customers were not satisfied
Ratings & Reviews
Lazer S.
1/6/2026
Glad you like them, Geoff and Sheri! They look pretty sweet on there! Is it custom built? Also, what was your favorite spot to camp so far?
Lazer S.
1/28/2026
Gary
2/1/2024
We are still very happy with the scissor steps. They are holding up extremely well after a year of use. Being so well made, I imagine theyll last many more years.
Tom
5/10/2021
Excellent product, still filling my needs as expected
Gwendolyn Y.
4/11/2025
I agree, Raymond, they do look great! When is your next trip out with the camper?
Do you have a question about this RV Step?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Bill
3/19/2026
We should have purchased these steps sooner, even our dog likes them, he doesn’t hesitate getting back into the camper now.for No mechanical issues they work as designed. I would recommend a fold out handrail for better balance going up and down, remember we are getting older.