Could SnapPad Mini Jack Pads Fit 2019 Lance Model 1062 Camper

Question

Question:

Trying to determine if these pads will fit 2019 Lance Model 1062 Truck Camper.

asked by: Allan M

0

Expert Reply:

While we don't know for sure if the SnapPad Mini Jack Pads part # SN39FR will fit your 2019 Lance Model 1062 if you can measure the feet of your jacks now it should be pretty easy to figure out. If your feet are 5-1/2 inches square these will work. If you have a different size let me know or check out the attached link to see all of the options we have where you can select your foot size from the drop down menu.

expert reply by: Jameson C

0

Answer 1

Hi Mark; more than likely the 5-1/2" will work but it won't be the #SN27FR. With your 5-3/4" measurement you probably need the #SN39FR for square feet. These also fit 5-3/4" round Reico Titan jack feet which are common on a lot of…

view full answer...

Answer 2

According to SnapPad you are going to need their Mini Jack Pads #SN39FR. I know this may sound weird since you have 5-3/4" round bases and the pads have a square opening.

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 5

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

Hey Jeff. There is definitely a correlation between weight and capacity. I've listed the weight of all three of the Power Mountain Tallboy Off-Road Bottle Jacks we have below: Power Mountain Tallboy Off-Road Bottle Jack - 7-15/16" to…

view full answer...

Answer 8

Hi Glen, It will depend on what the GVWR (gross vehicle weight rating) is of your trailer to determine which B&W 5th wheel to gooseneck adapter will work best for you. Fifth wheels and gooseneck trailers go off of pin weight instead of tongue…

view full answer...

Answer 9

Hi Robert! The EcoHitch Hidden Front Mount Trailer Hitch Receiver - Custom Fit - 2" #EH37FR will indeed fit your 2026 Ram 3500 diesel Mega Cab Laramie edition. I confirmed this with EcoHitch and we actually have a review from another person that…

view full answer...

Answer 10

Hey Brent, thanks for reaching out! Yes, you're on the right track. The Roadmaster Rear Anti-Sway Bar #RM46GR is the correct option for your 2016 Ram 3500 4x4 long bed without a factory rear sway bar. Just keep in mind this kit is designed for…

view full answer...

Answer 11

Hey Dave, welcome back! The only front hitch that fits the diesel models is the EcoHitch Hidden Front Mount Trailer Hitch #EH37FR. Installation will require some trimming. You can see what it's like in the installation video linked further down…

view full answer...

Answer 12

Hello Joe, Thank you for reaching out! The Power Mountain Tallboy Off-Road Bottle Jack - 11-5/16" to 27-1/16" Lift - 12 Tons #PM94FR does have the capacity you’d need, but since your fifth wheel’s frame sits about 25" off the ground,…

view full answer...

Could SnapPad Mini Jack Pads Fit 2019 Lance Model 1062 Camper

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching