Will The SnapPad Mini Jack Pads SN39FR Fit A 2018 Jayco Flight SLX With BL Levelers?
Updated 07/31/2026 | Published 07/23/2026 >
Question:
I have a 2018 Jayco Flight SLX with BL levelers, Metal pad size 5-1/2 square. Will the SnapPad Mini Jack Pads for Travel Trailers w/ BAL - 5-1/2inch Square Jack Feet - Qty 4 Part Number: SN39FR fit these pads ? Thank Jerry Gobet
asked by: Jerry G
Expert Reply:
Hey Jerry, thanks for reaching out. Yes, if your 2018 Jayco Flight SLX has the BAL leveling system with 5-1/2" square metal jack feet, then the SnapPad Mini Jack Pads # SN39FR are the correct fit. They're designed specifically for BAL jacks with 5-1/2" square feet and snap permanently onto the jack pads.

Dan
7/29/2026
I agree with Matthew’s comment. The snap pads have been on our 2020 Lance 1995 model TT for a few years now. They work great….it is nice to lower the stabilizers and or main jack and not have to worry about wood blocks, etc….I would definitely recommend the snap pads.

Ron K.
7/29/2026
I purchased the Snap Pads 2 years ago and I adore them! One of the Best Buy’s were have r for our 2018 Lance 2285 travel trailer! No more using oranges blocks under the jacks, just grab a drill and lower jacks and done. They hold up extremely well and we love them. I’m

Mark
7/31/2026
They work perfectly. The fit was a little snug so I used dish soap. We camp on gravel mostly so it adds the stability we need and they do not sink.

Wallyc130lm
7/31/2026
Jerry, the Snap Pads have been on my trailer for a couple of years. They are great, won’t come off the landing gear once on. Give firm contact when on concrete or gravel pads. Still need to use leveling blocks if your on uneven ground, unless you have self leveling systems on you trailer like the Lippert System.
Product Page this Question was Asked From
SnapPad Mini Jack Pads for Travel Trailers w/ BAL - 5-1/2" Square Jack Feet - Qty 4
- RV Jack Pads
- 5-1/2 Inch Jack Foot
- 4 Jack Pads
- Square Foot
- BAL Leveling System
- Permanent
- Black
- SnapPad
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: BTBRV Magnetic Hitch Receiver Reducer Sleeve - 2-1/2" to 2" - Red
- Q&A: Could SnapPad Mini part # SN39FR Fit 2024 StarCraft Super Lite
- Q&A: Will SnapPad Mini Jack Pads SN39FR Fit A 2025 Trade Wind 23 FBT With 5-1/2" Square Jack Feet?
- Q&A: Which SnapPads Fit the Scissor Jacks and Tongue Jack on a 2026 Forest River R-Pod 192?
- Q&A: Where is Weigh Safe Hitch w/ Built-In Scale for 2.5" Hitch Made
- Q&A: Will SnapPad SnapJack QD RV Stabilizer Jack Pads Fit Ultra-Fab Power Twin II
- Q&A: Why Choose BTBRV Trailer Jack Foot Scale Over Standalone BTBRV 2,000 lb Scale
- Q&A: Replacement Lug Nuts for a 2021 Grand Design Imagine XLS 17mke
- Article: RV Pre-Departure Checklist
- Article: What is the Best Trailer or RV Storage Cover
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: 30-Amp and 50-Amp RV Service: What's the Difference?
- Article: Our Team Picked The Best Camping Gear of the Year - Here Are Their Top Choices
- Article: How to Winterize & De-Winterize Your RV (Simple Guide)
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size



Matthew
7/29/2026
Hi Jerry, Adding to the "Expert" reply. These are an EXCELLENT choice to add to your stabilizers. Once on, they provide a nice firm footing, with a little "give" in the hard rubber for uneven surfaces. Just a little dish soap around the top edges when installing to help stabilizer foot pop in each SnapPad is all you need.