Videos are provided As a guide only. Refer To manufacturer
installation instructions And specs For complete information.
Item # E-100
Orders above $99 qualify for free shipping
Shipping Weight: 12 lbs
Intended for use on 4" square channel bumpers on the rear of many RVs and towable campers, this 2" x 2" hitch receiver is ideal for RV-approved hitch accessories, such as bike racks and cargo carriers.
Note: For use with RV-approved accessories only. All non-trailer loads - bike racks, cargo carriers and so forth - should be supported with stabilizing straps. Failure to properly support these loads will void your hitch warranty from Curt.
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
Video of Curt RV Bumper 2" Trailer Hitch Receiver
Videos are provided As a guide only. Refer To manufacturer
installation instructions And specs For complete information.
Today were going to review part number E-100. This is the Curt RV Bumper 2 Inch Trailer Hitch Receiver. This Curt RV bumper mount trailer hitch has a two inch square receiver opening, which is ideal for RV approved hitch accessories, such as bike racks and cargo carriers. This is intended for use on four inch square channel bumpers on the rear of many RVs and towable campers. It does have a black powder coat finish, which will resist corrosion. It does include the mounting hardware, the two carriage bolts and the two hex flange nuts.This hitch does have a weight capacity of 3,500 pounds gross towing weight capacity and a 350 pound tongue weight capacity.
You will want to check the towing weight capacity of the bumper youll be attaching this to and you never want to exceed the towing weight capacity of the bumper hitch. This hitch also has the elongated holes here on side to attach your safety chains to. I do want to give you a few measurements here. The overall width on this is seven and a half inches. Total from the bottom to the very top is eight inches and the square part to the top is six and a quarter inches.I did mention this will mount on a four inch square channel bumper, so as you can see the width on the inside is four inches.
Just to show you how this would mount, you would insert the carriage bolt through the two holes, use one of the hex flange nuts, square it on and just torque it down and then do the one on the other side. That should do it for review on part number E-100 .
Average Customer Rating: 4.8 out of 5 stars (164 Customer Reviews)Intended for use on 4" square channel bumpers on the rear of many RVs and towable campers, this 2" x 2" hitch receiver is ideal for RV-approved hitch accessories, such as bike racks and cargo carriers.
by: Richard E06/16/2015
The Curt 2” RV E-100 Hitch was received quickly and in good condition complete with all parts. The hitch is heavier than I expected but this is a good thing. I installed this on my used 35' Sabre 5th wheel to replace the OEM rear cargo carrier which did not suit my needs. The installation was easy and as expected. The Sabre bumper has a chrome plate trim piece attached by 2 small screws on either end that covers the top and face of the original black boxed bumper. I knew I had to trim out a piece the width of the bumper plate for the hitch to slide over for mounting and this was done with no surprises. The hitch does fit a four inch RV bumper but remember if ordering that the opened end of the hitch slot plates are flared out at the top for “clamping” action and narrows where the plates are 4 inches wide at the receiver end and there is no “give” there by design. So they may “fit” at the top but will only mount so far down if the bumper is wider than 4". Because of the low height of the Sabre bumper above the road surface, I mounted the hitch with the receiver “up” for more road clearance. I mounted a Rola 3 bike rack into the hitch but had only 2 bikes mounted. The hitch was excellent and I have no advice or comments for the hitch other than if you need a heavy duty add on hitch, buy this one. I did experience problems with the bike rack itself. It has a “Drop Down” feature to lower the bikes for easier removal. Due to the pivot design there's lots of play with the vertical neck of the rack and I needed to brace it better to reduce this play. At the end of a 35 foot RV the whipping action is very pronounced so be advised when using a bike rack that hinges near the hitch. I would highly recommend the E-100 and based on previous orders placed with E-Trailer I would highly recommend them also when ordering any trailer related item. 203781
Product seems to be very stout and well built. Mounted to my reinforced 4" bumper on 2004 Forest River Rockwood Roo. To clear the spare tire, I ordered an extra long ball mount. With everything mounted, the system seems to be very secure. I will be comfortable towing my boat with this. Etrailer's product descriptions and videos are excellent. 180039
by: Jamie V06/20/2012
Great hitch & easy to install. experience w/ Etrailer & Nicole in particular was fantastic & I will absolutely make future purchase here. If Nicole was closer to my area, I would offer a job in a heartbeat! Many people sell the same products so the difference is service and I have no doubt etrailer has a good training program but she has a natural gift & care to go the extra step to make everything to smooth-very, very impressed. As for the Swagman bike rack- I like the rack & seems very sturdy in construction but it is a loose fit in the receiver. a fastener clamp/tightener should be recommended or added. I had one from a cargo carrier and used that to tighten up the "play" in the receiver area. I could see this being frustrating for anyone that didn't happen to have this part laying around their garage. Delivery was perfect & I plan to load up the rack this weekend. Thanks!! 44982
by: RAY K04/13/2012
HELLO I LOOKED AT A LOT OF TRAILER HITCH RECEIVERS. AND THEY WERE ALL JUNK. ON TELL I FOUND CURT RV TRAILER RECEIVER I NEED IT FOR MY BIKE RACK I LIKE THE WAY IT IS MADE IT LOOKS GOOD ON MY NEW RV THANK YOU ETRAILER YOUR RATING IS EXCELLENT I SENT YOU THE MONEY IT WAS ON MY PORCH IN 3 DAYS 37110
by: lit l red Ed11/06/2016
As a returning customer, I am glad George was on his game. He prevented me from ordering the wrong part. He knew all about it, like he uses the products that he sells. He could tell that I was not sure, so he says "ED, this will fit your vehicle, I know ". Hearing the confidence in his voice, I said "order it". The order came in 4 days. It was the right size, the right color and all the right parts. My grand son and I installed it quick and easy. Grandma loves it. ( if Grandma is happy, everybody is happy ). George, remember this : The most important person in the company is .. the employee. If the company takes care of the employee, the employee will take care of the customer. 314400
by: Jim M.03/17/2011
I haven't installed this yet but I expect it to work great for my needs-attaching my bike rack to my travel trailer. I'm extremely satisfied with the ordering, price and speed of delivery. Great customer service/email feedbacks from ordering to delivery. The E-100 is heavier/beefier then I expected (very good). And price wise, I had gone to two local hitch stores and was quoted $200 for a similar attachment. The local place also tried to upgrade me to welding to the frame. I don't need to tow anything. I would definitely recommend etrailer. 9565
by: Marc Grimm02/13/2012
This hitch receiver is by far the best one available for use on the 4" square bumpers found on RVs. The pull and twisting loads are properly distributed to the maximum possible surface area of the bumper rather than being concentrated at two or four bolt points as with other add-on receivers. With this design the only load on the bolts is dead vertical tongue/rack weight and the bolts are at least two sizes larger than on other designs. Considering the Etrailer pricing on these units there can be no excuse for settling for second best. 31713
by: James T11/08/2013
Products received just as promised along with even an upgrade to quicker delivery. Thank you. We have just returned from a 3 week trip to Florida with various stops and the various products we purchased performed just as we had hoped. We have a 2013 Cougar Lite 5th Wheel and were very happy that the bikes were secure the whole time - particularly seeing that we had previously lost bikes off the back of a 5th wheel. 106794
by: Ron B.01/26/2015
Great price and fast shipping. I installed this on my 38 foot Fifth Wheel and was worried about how sturdy it was. Once I had it installed on the rear bumper and put the Swagman trail head RV bike rack in the hitch, it was solid. I loaded four bikes and went on our first trip which was 4 hours down the road with no problems. Recommend this unit due to its solid construction not to mention solid mounting hardware. 171280
by: chuck g.09/24/2013
This product is AWESOME! I needed a 2" receiver for a bike rack for my RV, I wasn't even sure such a product existed, and found this and it's great. Fit is perfect for a 4" bumper. I had to modify it a tad for upper clearance but that was just for my particular application and was no biggie. This product is really well built. And the service from etrailer is top notch as usual! 101388
We will get to us this next weekend to pull our boat behind our RV. Will let you know how great it works after that. Was very easy to put on RV!!! 185628
by: Fred G07/13/2016
This product is exactly what I needed. I searched around quite a lot before finding this product. I installed it in about 15 minutes. It appears to be very high quality. I wanted to be able to carry a moped on my small RV. This makes it possible. I suggest an add in " Trailer Life" and places that RVers might see it. Rapid delivery also. You're doing it right. 271523
I modified a motorcycle carrier with two receiver inserts to add strength to the system. I also beefed up the bumper mounting on my camper. I then installed two of these receivers on the bumper. I couldn't be happier with how this system has worked out. These receivers are strong and do a good job of supporting the motorcycle carrier. Two thumbs up! 262268
by: James (Bill) F.03/12/2012
The item is just what I was looking for to add a carrier to the rear bumper of my camper to transport a generator and fuel for the generator. Very easy to install and I am sure will serve me well. I was also very impressed with the service from etrailer.com. They upgraded my shipment without additional cost to me. Great Job Folks. 33578
by: Jack R12/17/2016
Product was just as described, and arrived in 3 days of placing order. It took about 10 minutes to mount and most of that was moving the spare tire mount over to the side so the receiver could be mounted in the middle if the bumper. It's very sturdy, plan on towing my flat bottom aluminum boat with it. Very satisfied. 325720
by: David R.04/14/2012
Product that I ordered was exactly as as stated in advertisement. Took about five minutes to install and looks good on the back of our coachmen fifthwheel. Bought to carry a swagman four bike rack on the back. Shipping was excellent and tracking and follow up by company was great thanks etrailer. 37157
by: Steve H.09/22/2014
Product was exactly what expected, Good solid construction, Installation was very easy. Dealing with customer service with any questions was beyond excellent, Christy B. was very pleasant to talk to and get exactly what I needed. I will be doing more business with e-trailer in the future. 152566
This fit snug on to my back bumper of my Keystone Bullet. It took a bit of work to get it into place, but there is no wobble at all. I put my bike rack on it and this works great. I am excited to use this several weekends this summer and be able to have the kids bikes at the campground. 208383
by: Joe R.09/12/2016
Extremely pleased with the quality. Fit my trailer perfect. I purchased several other items on this order and I have been happy with etrailer service and their communication with me on shipping and follow up! I highly recommend them as a company to deal with! Thanks etrailer! 294026
by: Philippe B.01/28/2017
I purchased this Trailer Hitch Receiver about a year ago. We have taken many trips since with our travel trailer with our 4 bikes on the back. This Curt product is sturdy and fits perfectly on a standard RV square profile bumper. I recommend this product without any reservations. 336455
by: Mark S.07/18/2015
Ordered my part/RV Trailer Hitch on a weekend/Saturday, & someone got back to me on the very next day/Sunday; I was surprised & happy to hear that it had already been shipped out and was enroute to my home-very impressive (2nd time I have used this company). Thanks again! 212737
by: Steve F.03/06/2012
Nice finish and design. I wish it was a little cleaner at the top of the bumper aesthetically. If there was a way to have the bolts on the bottom instead of the top, it would look better, and give me more confidence. Much better than anything else that I found. 33183
by: Curtis D.05/23/2011
Great product, easy to install, only negative, some safety locking nuts would be better than the spin on and torque nuts that were supplied. I did use a safety system to make sure it does not come loose, but your average installer would probably not have access to. 15151
by: Richard G.04/07/2016
This product arrived securely packaged and appears to be well constructed and easy to install. I still have to mount it onto the bumper, and to use it, in order to determine it's true benefits. If it works as good as it looks, It'll certainly be worth the price. 243292
by: Larry L Groll08/06/2016
Received the hitch today and it was exactly as advertised. Looks to be well made and should do the job to double pull my ATV trailer behind my travel trailer. Easy installation, took all of 10 mins. Quick shipping from date of order. Very pleased at this time. 280709
by: Johnnie H.05/31/2015
The Curt trailer hitch was just what I needed to attach the bike rack on my camper bumper. They were delivered quickly and packaged well. They were easy to assemble and very sturdy. I look forward to many years of service. Thanks again for a great product. 199221
If you order one make sure your camper bumper IS EXACTLY four inches square I had to do a lot of filing and grinding to make it fit. When they say four inches they mean EXACTLY FOUR INCHES MAYBE A SMIDGE LESS but it is very heavy duty and will do the job 82429
by: stan r.07/23/2012
Just installed yesterday, looks like a good heavy duty bumper hitch receiver. Will be using it to haul a Honda 3000 generator in an aluminum cargo box behind my camper. 49008
by: M. Mathis06/17/2015
I looked for a receiver for our camper the is is the best easy to install. Etrailer shipped it to us if very short time frame. Awesome if I need anything else I will look here 1st. Thanks being there and being a honest person. The cost below others. 204130
by: ronnie t.08/04/2015
I ordered the wrong item by mistake and when I contacted e-trailer, "keegan", fixed my mistake. all companies should be run this way...thanks e-trailer, and thanks keegan, I will tell all my friends and will continue to be a loyal customer....Ronnie t. 216753
by: Kurt K.08/21/2011
Nice/beefy American built hitch. Bought it for a bike carrier but liked the option of being able to tow with it in the future if needed. Was on sale and the price was great. Etrailer has spooky-good and fast shipping and customer communication. 22402
by: Gary W.03/18/2016
Shipped and received the same time as my cargo carrier. This completes my RV hook-up now that I have ordered by new 5th wheel for my new Super Duty. Got word that it has been shipped also. Great work and great communications. GWalker 241029
by: jeffrey c08/19/2012
I bought this to jerry rig a front hitch onto the r/v for putting a boat into the lake easier. Taking a chance of it working for me was elimated cause e-trailer posts the dimensions on the site. My project turned out easy and very functional 52253
by: Dan C.06/07/2011
Product is great! Had the box opened and receiver was mounted in less than 3 minutes. Fits perfects and is exactly what we needed. Fast shipping and excellent customer service from eTrailer as well. Couldn't be happier. Thanks!! 16252
by: George Chamberlain07/18/2014
I am very happy with the product I ordered. I was very impressed on how fast order was filled, shipped and received by me. Also, they are very helpful while on the phone with them in giving advice that is great. Sincerely, George 141976
This company has there act together, They are the best at delivery times and they keep there promises. Thank you and i will continue to use you for all my hitch needs and everything else that I can get from ya'll. Jim Leadville, CO. 27158
Big, solid piece of steel that fit perfectly on my 5th Wheel's bumper. All needed hardward and diagrams included. NOW, if that bumper will hold up, I can tow my dirt bike. 59245
by: Edmund W12/13/2016
I purchased a RV trailer hitch for my bike rack from etrailer based on a recommendation from my brother-in law. The hitch was very easy to put on and we, as full time RV'ers have used it throughout the past year as we travel the US. 324493
I have installed it but not used it yet but I am very happy with the Hitch. I will be using it very soon for a bike rack on the back of my Camper. And later on down the road I hope to use it to pull my Four Wheeler behind the Camper. 42193
by: Dennis VB12/11/2013
Received the product in three days. Hitch is "more" than I expected. Material is superb weight and well worth the money which was a "bargin". A great product and I haven't even bolted it on. I have recommended to all my friends. 109926
by: Gary P02/28/2017
Put this on my RV bumper and it is one heavy duty hitch receiver. Super easy to install and super fast also. So glad I purchased this receiver and I would tell anyone needing a bumper attached hitch receiver to get this one. 346728
by: Tom S.04/12/2012
attached (sled) onto bump of RV. Bolts are oversized. Front and back supporting plates will take most of the pressure while in transit. Easy install. Will be using it to carry a bike rack in a few weekends. Thank you. 36970
by: Jerry T.06/28/2015
I purchased the Curt RV receiver primarily for mounting a bike carrier. Installation was simple and worked great the one time we have used it. Construction and appearance is good and shipping from Etrailer was prompt. 207935
Curt makes quality stuff. Just what I expected from them. Install was simple...5 minutes. Took longer to relocate my spare tire. As far as etrailer goes...shipment arrived very fast...excellent customer service. 200097
by: Norb S12/01/2012
Great product & FAST shipping!!! Bought it for a much better price than at our local RV store!!! This will allow us to use our bike rack on the back of out camping trailer with out welding a reciever on our bumper. 60397
by: Jim S.11/27/2015
This is by far the best RV bumper receiver made! It took me longer to open the packaging than it did to install. E-trailer has the best support group and videos in the market, so helpful to the average person. 232607
by: Gilles L02/28/2014
The quality of this product, the look and the finish are outstanding. I was planning to weld my own, you know what? Forget it. You cannot comme near this bargain even if you do it yourself. I am very happy! 118013
Well packaged and shipped fast. I initially thought the product was a bit expensive but once I got it I was very impressed by its exact fit and thick steel. Very large heavy duty mounting bolts as well 123541
by: Buddy T12/05/2016
Very pleased with this product. The hitch was very easy to install,and I have used it on several trips with no problems. I would recommend this hitch to anyone that needs a quick cheap quality product. 322268
I bought this hitch for a Four Winds RV with a 4 inch square bumper & it fit perfectly. I am towing a 5.5 x 10 foot trailer & hauling an EZ GO Golf Cart. The hitch handles my needs with no problem. 292642
Ask the Experts about this Curt RV Hitch
Do you have a question about this RV Hitch?
At etrailer.com we guarantee:
Highest quality rv hitch for the best price.
Real product know-how.
Most detailed, accurate rv hitch information available.
Information for this part was:
Installations, made easy.
Personalized service for life.
Trusted since 1946.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.