Inno Square Bar Roof Rack for Naked Roofs - Steel - Black - Qty 2
This item does not fit your vehicle
2019 Volvo S90
These items fit your vehicle
2019 Volvo S90
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
When you’re loading up for a weekend on the water or heading out with camping gear, you want bars that can handle the weight. These Inno square crossbars are built from hardened steel and rated for up to 220 lbs, giving you the confidence to carry your kayaks, cargo boxes, or other gear securely. The steel construction delivers solid stability while staying durable trip after trip.
Road grime and weather can do a number on your rack if it isn’t protected. These bars are finished with an elastomeric coating that shields the steel from rust and corrosion. The smooth black finish keeps the setup looking clean while helping the rack stand up to years of exposure to rain, sun, and salty air.
If you leave your vehicle parked at the trailhead or campsite, it’s good to know your rack is staying put. The included lockable leg covers deter theft by securing the bar feet in place. You can load up your gear and go without stressing about someone walking off with your setup.
These square bars make it easy to mount clamp-on carriers and accessories—everything from kayak cradles to roof baskets and boxes. The classic square design gives a solid grip for clamps, so you can swap out gear depending on the season or your next adventure without needing extra hardware.
No factory rails? No problem. The complete system includes two 58" long crossbars, four square bar feet, and a custom fit kit that installs directly onto a naked roof. Once mounted, the rack provides a strong, secure base for your gear with a clean, factory-style look that stays put even on long highway drives.
Alternate Instructions
Ratings & Reviews
Lisa L.
5/7/2024
Still a great rack system. I do remove the crossbars and clips unless I need to haul my kayaks because of noise from wind when they are on. Very easy to reattach when needed.
Mike L.
7/25/2019
Per your photo, I can see you have the vehicle specific clips attached to holes in the roof rail. The clips are meant to install at the tops of the door jambs. Once correctly installed, everything should fit great for you.
Michael
3/18/2023
The Inno roof racks have been great. They still look new. We leave them on our SUV 100 of the time. They were a bit noisy at highway speed. At the suggestion of others, I wrapped them in paracord. That eliminated most of the noise.
Jenny N.
6/6/2023
I was curious by what you mean that the roof rack sticks too much.
Kris
6/6/2023
Thank you for the follow up. Its the locking mechanism, it is sticking too much and its not as aerodynamic as others - see attached. Its prone to catch wind and make noise. Considering the price and that my teen would use it, its a good rack :-. Thank you for the great service! If you feel my review is misleading, feel free to not post it.
Jenny N.
3/4/2022
There are a lot of factors involved when installing and using a roof rack. For the 2018 Ford Focus Sedan the roof rack capacity is 120 pounds although you would want to also check that the manual says for the vehicle. Before tightening anything down you will want to look at the instructions to find the proper spread between the bars and also the feet. Once that is down you will take the included Allen tool and tighten down the bolt. Next you will install the fit kit which will have you start with the foot pad. The foot pad will line up with the holes at the bottom of the foot. These will push into place and are numbered so that the right pad lines up with the right foot. To install the clamp you will remove the screw from the outside and loosely tighten it up to hold the clamp into place. The next step is to measure from the center of the doorjamb you will get the measurement to the center of the bar. You will find this in your instructions. Repeat on the other side. Then you will take the tightening tool and snug it up against the door. You will do this on the passenger side as well. Then you will go back and forth from drivers to passenger side giving about five or six turns each time until its completely tightened down. When it makes the clicking sound you will know its completely tied down. You do not want to over tighten it.
Do you have a question about this Roof Rack?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
William W.
11/20/2021
been a year now its a great product