We'll connect you with nearby partnered installers who know this exact setup.

CURT

Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"

Part Number: C13420

408 Reviews | 106 Questions

In Stock

$257.62

Retail:$431.95

You Save: $174.33

Not Confirmed to Fit

2011 Ford Explorer

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Add to cart

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

curt trailer hitch for towing 750 lbs wd tw receiver - custom fit class iii 2 inch

curt trailer hitch class iii 6000 lbs wd gtw c13420

curt trailer hitch class iii 750 lbs wd tw c13420

curt trailer hitch class iii 6000 lbs wd gtw

curt trailer hitch for towing 750 lbs wd tw

curt trailer hitch 6000 lbs wd gtw 750 tw c13420

Show All (7) Product Images

Show Fewer Product Images

In Use/Installed

2020 kia telluride trailer hitch curt for towing 750 lbs wd tw on a vehicle

2020 kia telluride trailer hitch curt class iii 750 lbs wd tw c13420

2020 kia telluride trailer hitch curt class iii 6000 lbs wd gtw c13420

2020 kia telluride trailer hitch curt for towing 6000 lbs wd gtw receiver - custom fit class iii 2 inch

2020 kia telluride trailer hitch curt class iii 6000 lbs wd gtw on a vehicle

2020 kia telluride trailer hitch curt for towing class iii on a vehicle

2020 kia telluride trailer hitch curt for towing 750 lbs wd tw receiver - custom fit class iii 2 inch

2020 kia telluride trailer hitch curt 6000 lbs wd gtw 750 tw c13420

Show All (8) In Use/Installed

Show Fewer In Use/Installed

Customer Photos

Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" customer photo

Show All (45) Customer Images

Show Fewer Customer Images

Videos

DIY 2023 Kia Telluride Installation for the Curt Trailer Hitch Receiver

Beginner’s Guide to Installing the Curt Trailer Hitch Receiver on a 2022 Kia Telluride

Setting up the Curt Trailer Hitch Receiver on a 2024 Kia Telluride

How to Install: Curt Trailer Hitch Receiver on your 2021 Kia Telluride

DIY Install: Curt Trailer Hitch Receiver on your 2020 Kia Telluride

Curt Class III Trailer Hitch Complete Installation - 2025 Kia Telluride

Show All (6) Videos

Show Fewer Videos

We'll connect you with nearby partnered installers who know this exact setup.

SCHEDULE AN INSTALLATION

This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Concealed main body maintains your vehicle's factory look. Powder coated steel is sturdy and corrosion resistant. Great Prices for the best trailer hitch from CURT. Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" part number C13420 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.

All Info
Reviews (408)
Q & A (0)
Related Parts
Photos

CURT Trailer Hitch - C13420

Highlights

Custom Fit for Your Vehicle: Mounts to existing attachment points
Handles up to 5,000 lbs (GTW): Suitable for towing small campers, boats, and utility trailers.
Supports 750 lbs (TW): Works with bike racks, cargo carriers, and Class III towing accessories.
Bolt-On Installation: Mounts directly to frame using included hardware—no welding required.
Concealed Main Body: Keeps a clean, factory-style look with only the 2" receiver visible.
Durable Powder Coat Finish: Gloss black coating over base layer resists rust and corrosion.

Features to know about

Haul More Without Sacrificing Style: Concealed Main Body with 2" Receiver

This Class III trailer hitch receiver gives you a clean, factory look thanks to a concealed main body that tucks up under the bumper. Only the 2" x 2" receiver opening is visible, keeping things neat while still giving you full utility for bike racks, cargo carriers, and trailers. The round-tube design looks sleek, and with a gloss black powder coat over a protective base coat, it holds up against corrosion and road wear.

Strong Enough for Everyday Towing: 5,000 lbs GTW and 750 lbs Tongue Weight

With a maximum gross trailer weight of 5,000 lbs and a maximum tongue weight of 750 lbs, this hitch gives you the muscle to pull small campers, boats, or utility trailers. Add a weight distribution setup and those numbers climb to 6,000 lbs GTW while maintaining the same 750 lbs tongue weight limit. The precision, robotic welding adds strength and ensures each part fits together just right for dependable support on the road.

Simplify Your Weekend Projects: No-Weld, Bolt-On Installation

This hitch bolts directly to your vehicle’s frame—no welding required. The included hardware kit and instructions cover everything you need to get it on with hand tools most folks already own. The design lines up with existing mounting points for an easier install whether you're in your driveway or working in a shop bay. Once mounted, it’s ready for whatever adventure or hauling task you have planned next.

Specs

Receiver Opening

Receiver opening: 2" x 2"

Class and Rating

Rating: Class III

Weight and Capacity

Maximum gross trailer weight: 5,000 lbs
Maximum GTW when used with weight distribution: 6,000 lbs
Maximum tongue weight: 750 lbs
Maximum TW when used with weight distribution: 750 lbs

Warranty

Limited lifetime warranty

13420 Curt Class 3 Trailer Hitch Receiver - 2"

Installation Details C13420 Installation instructions

This Product Fits The Following Vehicles

2020 - 2026 Kia Telluride

Customer Satisfaction Score:

99% were satisfied with this product

1% of customers were not satisfied

Product did not meet expectations
Wrong item was ordered
Did not arrive in time

1% of customers were not satisfied

Product did not meet expectations
Wrong item was ordered
Did not arrive in time

4.8

408 reviews

5 Stars		(360)
4 Stars		(32)
3 Stars		(6)
2 Stars		(5)
1 Star		(5)

by: Jeremy M 10/16/2025

2025 Kia Telluride

I have ordered several hitches from etrailer and been happy with all of them, including this one for my 2025 telluride.
Install took little under two hours including getting tools together and cleanup. Couple of suggestions after my install-
DO NOT cut the bumper piece per the instructions sheets. I marked it by their measurements and it looked odd - sure enough it would not have worked. I attached a photo, if you lay the piece upside side you can mark where to cut. You can’t see the cut after it’s installed unless you get on the ground, so don’t worry about getting it perfect.
The hardware on the exhaust side was the biggest pain. I had to torque from the nut side on the bolts that go through the frame. The socket extension from the other side was too long to manage by myself while holding the nut on the back side. And the heat shield on that side requires putting the washers on the hitch frame before passing the bolt through the washer and frame.
The video was very helpful. The printed instructions could use some updates. Example, it says there are four exhaust hangers to loosen but there are only three required.
Overall not too bad to install and I’m happy with the finished product. I didn’t have any shipping box issues like some have mentioned.

Click to Enlarge

by: Sly 08/15/2026 One Year Later

Great hitch, well made and fits perfit. The installation video was extremely helpful but a little misleading. My exact vehicle (Kia Telluride) was shown in the video and shows an effortless installation but certain challenges are skipped. The video does depict that the exhaust side of the installation will be more difficult but they made it look very easy, where in fact it's extremely challenging and takes two people. But with a lot of elbow grease and cursing, we got it installed. The rest of the installation was very straight forward and I'm happy with the results. As others mentioned, shipping was very disappointing. The hitch arrived in a box that was well damaged and caused several large scratches on the hitch. This is not the fault of etrailer but they could protect the hitch better (wrapped it up) or something to protect it since their shipping companies are rough with the boxes. I did file a complaint to etrailer and they gave me a small credit back and I bought some touch-up paint.

by: Roger 10/07/2026

Very simple to install and hitch is very heavy duty. The only suggestion I can make is that it would be nice if they could protect the receiver end better during shipment. This is the third hitch I have received that had broken through the box and paint was badly scratched. Not saying it’s the fault of E-Trailer appears to be the shipper and their rough handling of the package.

by: John 08/12/2026 One Year Later

Install was easy, as reported by my local mechanics that performed the service. Fit is good, and has mated perfectly with my Thule 4-bike rack.

by: Kevin M 07/21/2023

2023 Kia Telluride

Very happy with my hitch purchase from etrailer. The hitch shipped the same day I ordered it, and it arrived literally the next day.
The hitch included clear instructions and I installed it in about 90 minutes. Great experience from end to end with this purchase.

Click to Enlarge

Brooke M.

4/28/2025

Your experience here is basically the poster child for what we hope everyone can experience too! Thanks for sharing the photo -- hitch looks great!

by: Scott 08/16/2026

2021 Kia Telluride

I would strongly suggest adding $ 5.00 to the price and just send the M10-1.25 bolt tap.
The existing pre install threads where extremely corroded and full of dirt. The bolts would not start with out chacing the thread with the tap. Plus you don't even suggest that as a solution to the bolts not starting. Penetrating spray and a small wire brush is a joke. Especially above the muffler. There was know chance of starting those bolts. Could have saved myself an hour of installation if I had the tap to begin with. Other than that it wasn't to bad.
Last suggestion would be more cardboard protection over the bar, the paint was scratched in several places, or maybe some extra packing in the box would help.

by: William 01/20/2025

2025 Kia Telluride

Very good overall. A few things others may want to consider. The packaging is poor. The hitch is shipped in a cardboard box with no protection, so there were some dings and scratches. Having a can of glossy black spray paint available for touch ups available is a good idea.
Watch the video(s) before attempting, they are a helpful supplement to the instructions provided.
A couple notes from my installation: I recommend removing the plastic bumper cover before you mount the receiver. After removing, mount and hand tighten the receiver with the four smaller bolts to determine the exact location of the hitch and then mark the location for the bumper cover cuts with a marker. You can remove the bumper cover by just removing two screws and two push pins. This allowed me to make much more accurate and clean cuts with an oscillating saw. You can reattach the bumper cover without having to take down the hitch.

The only significant challenge was installing and tightening the two long bolts above the muffler (passenger side) due to the heat shield making the space around the bolt heads very tight. I hand to use a punch to pound the reward most bolt into the hole since I couldn't fit it in by hand. Then, I couldn't fit a socket or the round part of a hand wrench around the bolt head since there's not enough space and I couldn't reach both sides of the bolt since the muffler is in the way. Ultimately, I found I could fit the crescent (open) side of a hand wrench around the bolt head and wedge it against the car's frame to keep it from spinning while I tightened the nut side with a socket wrench.
You may want to consider borrowing a powered right angle impact wrench - or at least have someone else hold the crescent wrench while you tighten the bolt with a socket wrench.

Lastly, I backed my Telluride up to the back of my (level) garage and used the downward slope of my driveway to give me a few extra inches of clearance to work. Ramps would have been much better. Borrow a set or use some blocks if possible.

Despite the challenges, it turned out great!

Click to Enlarge

Brooke M.

1/29/2025

I love the detail! Thank you so much for taking the time to write all that out. Anyone who comes across your review is going to be glad they did because of all the info theyll glean. What all do you plan to use the hitch for?

by: knotts 08/21/2026 One Year Later

Hitch works well and is good quality, However its is lower then the OE hitch presumably to reduce the amount of modifications required to trim but I would have preferred if it was OE height

by: Neal 07/18/2025 One Year Later

Easy to install with the helpful video. Some parts are harder to access than others, but all the bolts lined up perfectly and no issues. It took me 1 hour or less for the whole thing with the rear wheels on blocks

Click to Enlarge

by: John 09/26/2025

Great hitch! Went in just like the description states. Love the fitment! I opted to leave the cover off instead of cutting it for now.

Click to Enlarge

by: Joshua 10/13/2026

2023 Kia Telluride

Got great and installation was a breeze.

by: Eric 08/03/2026

Took a bit longer to install than we thought on a Telluride. Need to take the heat shield out to install. Need to trim the center section of plastic bumper. But fits and looks great.

by: Tony 08/16/2026

It’s a hitch receiver alright!

by: Steve 05/07/2026

E trailer provided excellent service very very quickly. Product was shipped and delivered exceptionally fast. Would definitely use them again for any hitch needs I have in the future.

by: Jon 03/21/2024 One Year Later

I followed the installation directions for our 2023 Kia Telluride hitch carefully. To facilitate installation, since I have no lift, I had the car extended over a down facing driveway apron and raised up on blocks. It was still a little challenging to get the parts behind the rubber exhaust pipe hangers. A car jack and ropes helped hold the hitch in place while the bolts were installed. You have to be bold when cutting a hole in the bumper for the hitch to stick through. Once installed, the hitch has worked perfectly on many bicycle excursions with either of the two Curt bicyle racks I purchased - a four bike hanger rack (which can handle three adult bikes) and a two bike flat rack. Especially for the price, this has been an excellent solution for us. I would comment on the bike racks separately.

Click to Enlarge

by: Doug J. 09/10/2020

This is the second hitch I purchased from etrailer and I am extremely satisfied with the video's provided on the website, which helped me decide on the specific hitch I wanted (this one mounted higher and required a minor cutting of the removable bumper panel which I wanted for a clean custom look and for use of my son's platform dirt bike carrier). The video's were "spot-on" and super accurate and easy to understand, which helped greatly with the installation. etrailer is a "top-notch" company and has accurate information for specific installations. The hitch arrived on time and in great condition (packaged appropriately for the delivery). The hitch is of great quality and workmanship (welds and finish). The instructions to install were accurate and easy to understand. The dimensions to cut the removable bumper panel were also accurate and easy to mark out. Installation came out perfect! I will always purchase my hitches from etrailer. I have recommended this company to two friends and they are both satisfied with the company and products purchased.

Click to Enlarge

by: JE 06/07/2026

2022 Kia Telluride

Good product and easy to install without a lift if you have the right tools. I installed the hitch myself from the ground in about an hour.

by: Christine 03/29/2020

2020 Kia Telluride

Purchased this for my 2020 Telluride and it fit perfectly. Everything lined up and the installation video was spot on. Definitely would recommend. My husband & I installed in a little over an hour.

Click to Enlarge

Christine One Year Later

4/30/2021

Perfectly!! I love it!! And recommend it to other Telluride Owners. One ordered and awaiting arrival.

by: Dallas 12/06/2021

This hitch looks and feels like a beast! Once installed and fasteners tightened it feels like it’ll tow every ounce of its rated weight.

I installed by myself in about 4 hours (which included a trip to Wally World to get a new jack when my husky decided it was done.

A couple of tips that I guarantee will make your install easier:

#1: DEFINITELY install/screw in the bolts on the exhaust (passenger) side FIRST. This is exactly what the instructions say to do, but me being the “genius” I am decided to forget about that part and screw in the driver side first.

2.) You would be well served to purchase an “exhaust hanger removal tool” for removing the hangers from the exhaust pipe. They’re all over Amazon for $16-$25. I recommend the Lisle 38350 pliers. $16.19 and 1-day shipping. If you have never dealt with removing exhaust hangers before, I promise you it will be worth every penny (even if you use it only once). It’ll save much time and many headaches.

3.) When it comes time to trim the bumper panel to allow room for the hitch, use a jigsaw with laminate blade. My cordless dewalt jigsaw w/laminate blade cut through the panel like butter and made getting a perfect fit very easy (see pictures). Obviously this requires removing the panel altogether, but I would recommend doing this regardless of what tool you’re using for the trimming.

Also, the included instructions for the 2022 Telluride version show the spare tire being lowered by using a wrench on the underside of the vehicle. While this is possible, it is exponentially easier to lower it by using a 13/16” socket on the bolt accessed from under the removable back floorboard panel (if my description of the location is confusing, see page 6-16 of the ‘22 Telluride Owner’s Manual for an illustration and better description).

Overall I give this 5 stars. I am by no means an expert (or even moderate, for that matter) “car guy”, and was able to install by myself in one day. That being said, I am above average in strength so don’t assume you will be able to do it alone - the hitch is pretty hefty (which of course is a good thing), especially when maneuvering it while on your back under the car.

If you follow the 3 tips listed above, I guarantee it will significantly reduce your install time and result in a cleaner, more professional look.

Click to Enlarge

by: Speedbrakes 03/17/2026

Hitch and wiring fit great.

by: Lawrence 10/29/2020

2020 Kia Telluride

Everything is bolt on and extremely easy to install if you follow the video instruction or the instructions that come with the product. In addition to the hitch, I also got the harness which was easy to install. Thanks etrailer for making my family road trip happen.

Click to Enlarge

by: Steve 09/17/2026

Works great and pretty easy to install!

by: BG 06/13/2024

Customer service at trailer is top notch! Although the box arrived damaged and parts of the hitch were scratched, but this is only the fault of the shipping company. Overall the hitch is in good shape and mounted perfectly on the Telluride. Good instructions, great videos from etrailer, and a solid product from Curt!

Click to Enlarge

by: Marva 09/02/2026 One Year Later

Very easy install and perfect fit.

by: Angel Vargas 06/20/2025

2022 Kia Telluride

Perfect fit for 2022 telluride s
Well recommended

Click to Enlarge

Brooke M.

6/23/2025

That's awesome! Looks like you did a great job. What are you towing with the new hitch?

408

true

Show More Reviews

See what our Experts say about this CURT Trailer Hitch

Do you have a question about this Trailer Hitch?

What is the Best Hitch for a 2024 Kia Telluride?
To add a hitch to your 2024 Kia Telluride, I recommend the Curt Trailer Hitch item # C13420. This hitch is custom fit and bolts to your Kia with included hardware. I really like this hitch because the crosstube mounts behind the rear bumper leaving only the receiver exposed. This not only helps with ground clearance but it also looks better. The Curt item # C13420 is a class III hitch with a 2" receiver. It has a 5,000 lbs towing capacity and a 750 lbs maximum tongue weight. The towing...
view full answer...
Recommended Tow Wiring Harness for a 2025 Kia Telluride
Yes, there is Jason. We actually have two different options and which one you need is going to depend on whether or not your 2025 Kia Telluride has LED lights. I have listed both of them below: With LED Lights - Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector item # C29ZV Without LED Lights - Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector item # C93FV Both of these custom-fit T-connectors plug into your Kia's wiring harness, which...
view full answer...
Trailer Hitch And 7-Way For 2025 Kia telluride EX X Line
Hello Travis, thanks for reaching out. For your 2025 Kia Telluride EX X Line I recommend the etrailer Class 3 Hitch # e45ZR. This has a 2" receiver, and features the matte black coating you are looking for. We have found the matte black coating blends better with the underbody of the vehicle. For a wiring harness, you can use the Curt T-Connector # C29ZV. This is a 4-flat connector, and will work with your LED taillights. If you wish to upgrade that to a 4-flat/7-way combo, you can use...
view full answer...
Recommended Hitch, Wiring Harness, and Brake Controller for a 2021 Kia Telluride
Hey Robert. A class III hitch like the Curt item # C13420 is exactly what you need for your 2021 Kia Telluride. It is custom fit and has a 5,000 lbs towing capacity. You'll easily be able to pull a 3,500 lbs Colman 13b with this hitch. The Curt T-Connector Vehicle Wiring Harness item # C68JR you referenced, will fit your 2021 Telluride if your have the factory tow package. This is a 7-way connector that will allow you to control all the lighting functions and brakes on a trailer. The...
view full answer...
What Hitch Installs on a 2024 Kia Telluride that Does Not Require Trimming?
Not, the Curt item # C13420 or the etrailer item # e45ZR no. The only hitch that can be installed on the 2024 Kia Telluride that does not involve any cutting or trimming is the Stealth Hitches Hidden Rack Receiver item # 391KIATELL20. The Stealth Hitches Hidden Rack Receiver item # 391KIATELL20 is custom fit for the 2024 Kia Telluride and bolts to it with included hardware. It has a removable receiver which is why it does not require any trimming of the fascia. If you want to tow with...
view full answer...
Do 2024 Kia Telluride's Come With A Trailer Hitch And Wiring Already Included
Kia Tellurides are in our install shop all the time for hitch and wiring installs since Kia typically will not install them at the factory. Manufacturers use "tow package" as a buzz word to charge you more typically so you'll want to get explicit descriptions of what is included with the vehicle. If it doesn't come with a trailer hitch then you can install the Curt Trailer Hitch Receiver # C13420. For wiring you would first need to install a 4-pole wire harness like the Curt Powered Tail...
view full answer...
Recommended Brake Controller for a 2020 Kia Telluride
For your 2020 Kia Telluride you need to start off with the T-Connector Wiring # CU94FR which plugs into a connector under your vehicle on the driver's side. Then for a brake controller I highly recommend using the Curt Echo # C51180 because you adjust the settings with your smart phone via Bluetooth and it can easily be stored in your glove box when not in use. Since this brake controller plugs into the 7-Way at the back of your Telluride you retain the OEM look on the inside of your...
view full answer...
Does The Curt Hitch C13420 Require The Rear Power Latch To Be Replaced On A 2023 Kia Telluride?
Hey Thomas thanks for your question. The Curt Trailer Hitch # C13420 does not require the rear power latch to be replaced. We have done several installs on Telluride models 2020-2024 and a latch replacement has never been needed. I even double checked with Curt and they confirmed this. The latch replacement must be specific to the Kia OEM hitch and is likely something that would only be done at a dealership. I have linked our install video for a 2023 Telluride below if you want a closer...
view full answer...
Recommended Hitch and How to Get It Installed on a 2024 Kia Telluride
Hey Kevin. If you go to the product page of the Curt Hitch item # C13420 you purchased and scroll down below the pics on the left side you'll see a box that says, SCHEDULE AN INSTALLATION. Go ahead and click on it and it will take you to a page where you'll be able to enter your zip code. Once you do this you'll be connected to our network of reputable installers in your area. The Curt Hitch item # C13420 is confirmed to fit the 2024 Kia Telluride. This is a class III hitch with a 2" receiver....
view full answer...
Can A Bumper Plate Be Used Instead Of Trimming For A Hitch Installation On A 2020 Kia Telluride
As long as this bumper plate fits in place of the original bumper panel, it could provide an alternative to having to trim the bumper panel during installation of the Curt Trailer Hitch Receiver # C13420. The hitch is a confirmed fit while we can't confirm fit for this bumper plate. You will want to note the dimensions of the receiver at 4-1/2" from the center of the hitch pin hole to the rear of the bumper and ground to the top edge of the receiver tube as important dimensions pairing...
view full answer...
Does Curt Trailer Hitch Install on 2020 Kia Telluride Require Removing the Spare Tire
When installing the Curt Trailer Hitch Receiver # C13420 on a 2020 Kia Telluride you do have to remove the spare tire; that is the first step but it does get put back into place at the end of the installation. The install of this hitch is relatively straightforward with a number of different steps but nothing that requires any specific technical savvy. You will need to (temporarily) lower the exhaust and remove an underbody panel on the driver side, but apart from that you just raise the...
view full answer...
Trailer Wiring for Kia Telluride
Hi Fred; the Curt T-Connector Vehicle Wiring Harness # C68JR is designed to fit the 2020 - 2022 Kia Telluride with Factory Tow Package. If you have the factory port for wiring you can still install the wiring harness without the tow package. Check underneath behind the rear wheel on the driver side to see if you have the connector. If you don't, you will need the # C29ZV you were looking at for a 4-way (assuming this is a 2023-2025) and then the # ETBC7 to upgrade to a 7-way. What year...
view full answer...
Most Affordable Wiring Harness and Hitch for a 2024 Kia Telluride
Hey David! We have exactly what you need for your 2024 Kia Telluride. I have listed the parts below: Class III Trailer Hitch - Curt item # C13420 Custom Fit 4-Way Wiring Harness - Curt item # C93FV - without LEDs or Curt item # C29ZV if your Telluride has LEDs Here are a couple of other parts you might need. I recommend the No-Drill Mount Bracket item # 18136 and the item # C42CR to secure the 4-way connector to your hitch. This will put it in an easy to reach spot and prevent the risk...
view full answer...
Will EcoHitch Hidden Trailer Hitch Fit 2024 Kia Telluride X-Line
Hey Josh! The EcoHitch Hidden Trailer Hitch # EH22KR will fit your 2024 Kia Telluride X-Line. None of the hitches for your vehicle have fitment restrictions based on trim so any of them will work. This includes the Curt Trailer Hitch Receiver # C13420 you ordered. What will you be using the hitch for?
view full answer...
Difference Between 2020 Kia Telluride etrailer and Curt Hitches
Hey Michael, thanks for reaching out! The only difference between the etrailer # e45ZR and Curt # C13420 hitches that fit your 2020 Kia Telluride is the finish. Aside from that they are the same. I personally like the etrailer matte black coating better. I've owned a few of them and they tend to hold up really well against corrosion and scratches. I see that you ordered the etrailer hitch and the T-One Wiring # 118784 from us just recently (thanks for that by the way!). Are you looking...
view full answer...
Is The Ground Clearance For etrailer, Curt, And Kia OEM Trailer Hitch The Same For A 2024 Telluride
Hey Tien, The Curt # C13420 and etrailer # e45ZR trailer hitch receivers both offer a 15" measurement from the ground to the top of the inside of the receiver tube opening. I'm not quite sure exactly what the OEM hitch from Kia's measurement will be but it sits right under the bumper so more than likely the ground clearance is exactly the same for all three hitches.
view full answer...
What Hitch and 4 Flat Wiring for 2024 Kia Telluride for Bike Rack and Hitch Mounted Accessories?
Hello Reed, For your 2024 Kia Telluride, it looks like the round tube hitches that are listed are rated for a higher tongue weight than the square tube options. You’ll want to double-check your owner's manual to confirm how much tongue weight your Telluride is rated to handle. Just because a hitch is rated for a higher amount doesn’t necessarily mean your vehicle can handle that amount of weight. Our etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" #...
view full answer...
Does the Curt Hitch C13420 Fit a 2024 Kia Telluride?
Yes, it does! The Curt Hitch item # C13420 does fit the 2024 Kia Telluride. This hitch is custom fit and bolts to your Kia with included hardware. It is a class III hitch with a 2" receiver that has a 5,000 lbs towing capacity and a 750 lbs maximum tongue weight. I really like the Curt item # C13420 because the crosstube mounts completely behind your rear bumper leaving only the 2" receiver visible. This not only looks better but it also helps with ground clearance. I have attached...
view full answer...
Recommended Hitch and Wiring Harness for a 2024 Kia Telluride
I would be happy to! To add a hitch to your 2024 Kia Telluride, I recommend the etrailer item # e45ZR. This hitch is custom fit and bolts to your Kia with included hardware. I really like this hitch because the crosstube mounts behind your rear bumper leaving only the 2" receiver exposed. This not only looks better but helps with ground clearance. The matte finish also blends in better with your Telluride's trim unlike the glossy finish on the Curt item # C13420 you were looking at. The...
view full answer...
Correct 4-Way Wiring Harness for 2024 Kia Telluride SX Prestige X-Line
The correct wiring harness for your 2024 Kia Telluride SX Prestige X-Line is the Curt # C29ZV. This plugs into the connection points in your rear cargo area and is compatible with your LED lights. The # TK74CR is only designed to work with the LX and S which do not have LED lights. If you wanted to install a 7-way you would need to start by installing the Curt 4-way and then upgrading it with the # ETBC7. The adapter that comes with this kit has both a 4-way and 7-way plug. Having a...
view full answer...
Recommended 7-Way Connector for a 2024 Kia Telluride w/out the Factory Tow Package
To install a 7-Way connector on your 2024 Kia Telluride you will need two separate wiring harnesses because they don't make just one that'll do the job. The first harness you'll need is the Curt T-Connector Vehicle Wiring Harness item # C93FV. This custom-fit T-connector plugs into your Kia's wiring harness, which is located behind the tail lights. This will provide you with a 4-flat connector. The second harness you will need is the Universal Installation Kit for Trailer Brake Controller...
view full answer...
Recommended Hitch for a 2023 Kia Telluride
To add a hitch to your 2023 Kia Telluride, I recommend the Curt Trailer Hitch item # C13420. This hitch is custom fit and bolts to your Kia with included hardware. We recently installed one of these hitches and the best part about it is that the crosstube mounts behind the rear bumper. This leaves only the 2" receiver visible. I have attached a couple of pictures below so you can see what I am talking about. If you are planning on towing you will also need a ball mount kit item # C45534...
view full answer...
What is the Best Hitch for a 2024 Kia Telluride?
Congrats on the new vehicle! The best hitch for your 2024 Kia Telluride is the etrailer item # e45ZR. This hitch is custom fit and bolts to your Kia with included hardware. This is a class III hitch with a 2" receiver. It has a 6,000 lbs towing capacity and a 750 lbs maximum tongue weight. The etrailer item # e45ZR is the best hitch because the main crosstube mounts completely behind your rear bumper leaving only the 2" receiver exposed. This not only looks better but helps with ground...
view full answer...
Recommended Hitch and Wiring Harness for a 2023 Kia Telluride
Congrats on the new SUV. To add a hitch to your 2023 Kia Telluride, I recommend the Curt Trailer Hitch item # C13420. This hitch is custom fit and bolts to your Kia with included hardware. This is a class III hitch with a 2" receiver. It has a 5,000 lbs towing capacity so you'll have plenty of ability to tow a boat trailer. For a 4-way wiring harness, you will need the Curt T-Connector Vehicle Wiring Harness item # C93FV. This custom-fit T-connector plugs into your Kia's wiring harness,...
view full answer...

< Previous

12 3. . .5

Next >

Do you have a question about this Trailer Hitch?

Info for this part was:

Expert Research:

Mike L

Expert Research:

Jameson C

Edited by:

Lindsey S

Video Edited:

Jacob T

Video Edited:

Dustin K

Video Edited:

Chris R

Updated by:

Wilson B

Updated by:

Michael B

Video by:

Jonathan Y

Video by:

Thomas T

Test Fit:

David F

Test Fit:

Clayton O

Test Fit:

Bradley B

Test Fit:

Scott A

Written by:

Kristina F

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.