Replacement Heavy Duty Landing Gear Jack Leg For Lippert Ground Control 2.0

Question

Question:

Can I use a 241845 landing gear leg to replace the 29inch gear leg on my lippert ground control 2.0 let on the passenger side?

asked by: Christina

0

Expert Reply:

The Replacement Heavy-Duty Landing Gear Jack Leg for Ground Control 2.0 - Extended # LC241845 is a replacement for the Heavy-Duty Landing Gear Jack Leg for Ground Control 2.0 and will work on either side.

expert reply by: David B

0

Answer 1

Mounting hardware does not come with the replacement gear box part #RVLG-RDBOX.

view full answer...

Answer 2

We've seen this issue before on an older camper that had the screen door installed a little lower than how they are now. An installer here actually had this exact problem. If your door is close to closing, a couple suggestions that you can try…

view full answer...

Answer 3

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 4

No, they will not Mark. The Replacement Legs item #RP63FR only work with the Reese M5 hitches like the item #RP30928 for example. The only way to mount the Reese 5th Wheel Trailer Hitch item #RP30047 in the puck system of a 2025 Silverado is to use…

view full answer...

Answer 5

Hi Steve; the Air Lift WirelessONE Compressor System for Air Helper Springs #AL25980EZ and #AL25980 are both single path systems and come with a remote and Bluetooth functionality. The main difference is the mounting and the compressor. The…

view full answer...

Answer 6

Hello Jeff, Congrats on the new Canyon Denali!! What is your favorite new feature? You’ll want the Air Lift Ride Control Air Helper Springs - Rear Axle #AL59533. They have a 2,000-pound leveling capacity, which is more than enough for the Canyon…

view full answer...

Answer 7

Hey Steve, The AirLift airbags with internal jounce bumpers are not able to be added to a system without so you would need to get a whole new system. With that said the system with the internal jounce bumpers is going to create a much rougher ride…

view full answer...

Answer 8

Hey Eric! Yes, you can still use the Meyer WingMan Commercial-Grade Hydraulic Snowplow #ME55FR on your truck with a lift. What you need to do is measure the hitch height. Meyer requires 10"-13" from the ground to the centerline of your…

view full answer...

Answer 9

Hey Mark, the Air Lift WirelessONE part #AL25980EZ does have an inlet air filter but the part #AL25980 does not.

view full answer...

Answer 10

Hey Danny I can't see your cart but I can tell you that both Air Lift LoadLifter 5000 kits we have item #AL88341 and item #AL57341 will work with your 2023 GMC Sierra 2500 so long as it's a 4WD and does not have factory air suspension. Please…

view full answer...

Answer 11

No, I am sorry it will not. Your B&W item #BWGNRK1012 stops fitting the Sierra 3500's after 2019 when GM changed the frame size. For your 2022 GMC Sierra 3500 you will need the B&W Turnoverball Underbed Gooseneck Trailer Hitch item…

view full answer...

Answer 12

Hey Jimmie congrats on the new truck! To prevent sag when towing your trailer, I recommend the Firestone Ride-Rite Red Label Extreme Duty Air Helper Springs item #F2709. These air bags have a 7,500 lbs capacity that will level out the rear end of…

view full answer...

Replacement Heavy Duty Landing Gear Jack Leg For Lippert Ground Control 2.0

Product Page this Question was Asked From

Continue Researching