Product Experts Available Now!
Call 1-800-940-8924
HappiJac Electric Truck Camper Jack System - 34-1/2" Lift - 8,800 lbs
(21 reviews)
Price: $4,091.41
In Stock
HappiJac
HappiJac Electric Truck Camper Jack System - 34-1/2" Lift - 8,800 lbs
Part Number: LC736514-ELKIT
In Stock
$4,091.41
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (21)
- Q & A (0)
- Photos
HappiJac Camper Jacks - LC736514-ELKIT
Highlights
- Loads and Unloads Faster: Electric motors lift or lower all four corners at once for quick camper setup.
- Operates from a Distance: Wireless remote lets you raise, lower, or level each jack while standing clear.
- Handles Heavy Campers: 8,800-lb total capacity (2,200 lbs per jack) keeps large rigs steady during lift.
- Stays Smooth and Quiet: Maintenance-free Acme screws and self-lubricating nuts keep motion even and controlled.
- Holds Firm on Uneven Ground: Concave footpads grip securely to reduce rocking and side movement.
- Resists Rust and Wear: Zinc-plated steel tubes with powder coat finish stand up to rain and road grime.
Features to know about
Effortless Camper Lifting: Electric Operation with 34-1/2" Lift
Getting a camper on or off can take time and muscle, but these electric jacks handle the work for you. The HappiJac Electric Truck Camper Jack System lets you raise or lower all four corners with the push of a button. Each jack has 34-1/2" of lift and supports up to 2,200 lbs for a total capacity of 8,800 lbs. The clutchless motor heads move smoothly through a maintenance-free Acme screw system, giving you quick, even height changes without hand cranking.
Smooth, One-Person Control: Wireless Remote with Independent or All-Jack Operation
No need to bounce back and forth between corners anymore. The included wireless remote lets you extend or retract each jack individually or all at once while standing back to keep your camper level. The buttons are clearly labeled and color-coded for easy use, so you can make precise adjustments without guesswork. It’s a simple way to control the lift safely on your own.
Built for Strength and Stability: Square Steel Tubes and Concave Footpads
A solid stance matters when your camper is suspended in the air. These jacks use heavy-duty 2" square tubing that resists flexing and provides superior durability. The concave footpads settle firmly on the ground to reduce movement and increase stability during lifting or lowering. Locking levers keep each jack at the height you set, so once it’s in position, it stays there until you’re ready to move again.
Resists the Elements: Zinc-Plated and Powder-Coated Finish
Corrosion is tough on gear that lives outdoors, but these jacks are built to handle it. The inner and outer tubes are zinc-plated to resist rust, while the outer tube also gets a white powder-coat finish for extra protection against the elements. That coating not only shields the steel but keeps a clean look season after season.
Straightforward Setup and Maintenance: Bolt-On Mounting Brackets Included
Installation is simple with front and rear mounting brackets designed to fit most campers. The circuit board and wiring harnesses connect directly to each motor head for consistent power delivery. Every component sits where it’s easy to reach for service or maintenance later on, keeping the entire system simple to install, operate, and maintain over time.
Specs
Weight and Capacity
- Overall weight capacity: 8,800 lbs
- Per jack: 2,200 lbs
Dimensions
- Lift: 34-1/2"
- Outer tube height: 51"
- Tube width: 2"
Warranty
- Warranty period: 1-Year warranty
Note
These camper jacks are designed for lifting and lowering only, and should not be used to support your camper during storage.
736514 Lippert Components (LCI) Happy Jack Camper Jack - 34-1/2" Lift - 2,200 lbs - Qty 4
733960 Motor Heads w/ Logic Board & Remote for Lippert Components (LCI) Happy Jack Jack System
182524 Wiring Kit for Lippert Components (LCI) Happy Jack Electric Camper Jack
Replaces 4100, 4150, 4160, 4200, 4500, 4560, 4600, and 4660 HappiJac Systems
Ratings & Reviews
4.7
21 reviews
by:
Paul
05/13/2026
this was a exact repacement ,part for part ,all arived in a few days of ordering, thanks
by:
Todd
06/13/2023
More instructions for the brackets would have been helpful.
by:
Michael
09/13/2023
Fantastic service. Got my product day before they said it was going to be delivered.
by:
Greg
11/10/2023
a great t way to raise and lower camper. Only takes minutes and you are done. Love them.
by:
Todd
08/15/2023
Very happy with everything
by:
Bruce
06/22/2024
Got here before I expected them. Haven't installed them yet.
by:
Dale
08/27/2026
by:
Joann
09/28/2026
These are a lot more stable than the old ones that were on it before. I think the square tubing is better than the round and they have a higher load capacity since we have to raise it up in the air to clear the bed of the truck.
by:
Chris
10/06/2026
theonly problem was shipping to canada was tricky
by:
Benjamin
07/29/2025
The fit was plug & play bolt on. No problems swapping in these new jacks. I've been using them while camping and have no complaints. Zero issues with the existing (original) remote control either.
by:
Mark
10/17/2023
These camper jacks arrived with a damaged protective weather seal. When I contacted etrailer for a replacement, they told me there were no replacement parts available and nothing they could due about it. The failure appeared to be a result of poor packaging. Very disappointing for an expensive item.
by:
Mitchel
07/28/2021
You guys went above and beyond my expectations with my shipment . After having a hiccup in shipping you shipped out the next box super quick and I was super happy with your service. Thanks etrailer
by:
Craig
10/11/2021
These jacks are great! Can't wait to get on the road.
by:
Royce
10/02/2023
Royce C.
10/3/2024
Good
by:
James
05/21/2022
Have worked perfectly from day one!!
by:
Tim
02/06/2023
Delivered on time, and time will tell how they operate compared to the 4500.
by:
William
10/12/2021
by:
Terrance
04/17/2021
by:
Kenneth
11/06/2022
by:
Vicki
08/24/2021
by:
Charles
09/09/2022
21
21
true
See what our Experts say about this HappiJac Camper Jacks
- Replacement Mounting Brackets For HappiJac Electric Truck Camper Jack SystemIf you're looking for just the L-bracket for your HappiJac Electric Truck Camper Jack System # LC736514-ELKIT then you'll need part # LC182492. The flat bracket can be swapped out with part # LC182494 and the swing brackets can be replaced with part # LC182496.
view full answer...
- Option to Replace Discontinued Atwood Camper Jacks 86065Atwood is no longer in business so those camper jacks are no longer something available for purchase. While I realize that's not what you wanted to hear, there are options for replacements that I wanted to mention so you have that option: - Brophy Heavy Duty Cable Camper Jacks - 57" Max Lift Height # CXHD - Brophy Heavy Duty Cable Camper Jacks - 67" Max Lift Height # CX74 These are manual jacks with a combined 4,000 lb lift capacity which will work for your Lance truck camper's weight....
view full answer... - Replacement for Atwood Heavy Duty MPD 86065Hey Dave! Atwood is no longer in business so the best replacement options is the HappiJac Electric Truck Camper Jack System # LC736514-ELKIT. I don't have the full specs on the old Atwood but I can tell you these have a total capacity of 8,800 lbs and a 34-1/2" lift. What kind of camper do you have?
view full answer... - Replacement for a Happijac 4160 SystemHey Kelly, thanks for the pictures. Sorry to hear about your jacks being damaged. Unfortunately, since your Happijac 4160 system has the clutched motor head, I do not have a replacement for just the motor head. The 4160 is a 2-piece construction ACME screw drive, and the roll pins that connect the ACME screw to the upper assembly can shear with the clutch-less motors. The HappiJac Electric Truck Camper Jack System item # LC736514-ELKIT is what you'll need to replace your entire 4160...
view full answer... - Do You Have a Set of SnapPads for HappiJac Camper Jack Systems?We sure do Steve and welcome back! The SnapPad TC Jack Pads for HappiJac Camper Jack Feet item # SN67VR are the ones you'll need. The SnapPad TC Jack Pads item # SN67VR are custom fit for all of the HappiJac systems. This set of four pads measures 7-3/4" long x 7-3/4" wide x 2-3/4" tall. They'll permanently mount to the feet on HappiJac systems like item # LC736514-ELKIT and item # LC736514-4. What kind of camper do you have and what type of ground do you typically camp on? Feel free...
view full answer... - Is There a Manual to Electric Conversion Kit for HappiJac Model 4160There is another solution, but unfortunately there is not a manual to electric conversion kit for the HappiJac 4160. You would need to upgrade your jacks to the HappiJac Electric Truck Camper Jack System # LC736514-ELKIT. The Manual-to-Electric Conversion Kit for HappiJac Truck Camper Jack Systems # LC733960-182524 is only available for the 4220 and 4820 jacks. There is a strong likelihood the jack would fail if used on a different jack/model. The reason it will not work for your 4160...
view full answer... - Replacement Crank For An Atwood Truck Camper Jack System Hey Tom, Atwood has been out of business for long enough now that all replacement parts for most of their products, including your MPD86065, have been discontinued and sold out. This leaves you with either replacing the entire system with one like the HappiJac Electric Truck Camper Jack System # LC736514-ELKIT or you could reach out to a local fabricator shop and see if they can make a new crank or fix the one you have if it's broken. We also offer a manual crank option with the Brophy...
view full answer... - Availability of Replacement Cover for Discontinued Atwood MPD 86065 JackHi Tim; Atwood went out of business quite a while ago so their parts are no longer available. The only solution we have is replacement jacks like # LC736514-ELKIT. I'm assuming yours still function so that wouldn't be a good solution. I was able to find a cover elsewhere online by searching "Atwood 86065 cover" so I would give that a shot. If you still have the cover, but it is broken, I you can attempt to repair it as well. It may not be pretty but it is better than new jacks. The other...
view full answer... - Option for Upgrading Atwood Landing Gear from Manual to Electric SetThe Atwood line of landing gear jacks has been discontinued for some time so to upgrade to an electric set you'd have to go with new landing gear like the # RVLG-8HDL and then install the motor part # LC142178 with it and you'd have a very similar setup but with a motor that will make raising and lowering the trailer easier.
view full answer... - Recommended Replacement Jacks for an Older Happijac 4150Barbara, for your Happijac 4150 jacks you can use the HappiJac Electric Truck Camper Jack System # LC736514-ELKIT to replace your current Happijac 4150s. These jacks have a 34 1/2" of lift, an 8,800 lb weight capacity, and is made in the USA.
view full answer... - Is there A Replacement Remote for An Atwood Jack System AvailableHey Joseph, unfortunately since Atwood is no longer in business their replacement parts are not available and nothing seems to be back compatible. With that said, your only real option would be for a complete replacement with something like the HappiJac Electric Truck Camper Jack System # LC736514-ELKIT. These jacks have an 8,000 lb capacity, a 34 1/2" lift height, and is made in the USA. I know this isn't what you wanted to do, but unfortunately seems to be your best choice :/ If...
view full answer... - Is There a Way to Convert 4160 Happijac to Electric Hey Dan, unfortunately there is not a manual to electric conversion kit for the HappiJac 4160. You would need to upgrade your jacks to the HappiJac Electric Truck Camper Jack System # LC736514-ELKIT. The Manual-to-Electric Conversion Kit for HappiJac Truck Camper Jack Systems # LC733960-182524 is only available for the 4220 and 4820 jacks. The reason it will not work for your 4160 is that the 4160 is a 2 piece construction acme screw drive, and the roll pins that connect the acme screw...
view full answer... - How Tall Above Jacks are Happijac Jack MotorsHey Travis, the # LC736514-ELKIT requires 8.5 inches of clearance from the top bolt jack to the top of the motor for installation. If you only have 6.5 inches of clearance this would not work for you.
view full answer... - Will The HappiJac Swing Out Extension Work With Atwood Jacks On A Truck Bed CamperAs we do not carry the Atwood jacks, I cannot confirm the fitment without knowing the measurements. However, the bolt holes on the HappiJac Swing Out Extension Brackets # LC182496 will measure 7-1/4" between all the bolt holes, picture included. If this matches your Atwood jacks, you are good to go. If it doesn't match up, we do have the HappiJac Electric Truck Camper Jack System - 34-1/2" Lift - 8,800 lbs # LC736514-ELKIT that will work with it and replace the older Atwood system.
view full answer...
- Solution for Needing Replacement Motors for Happijac 4500 and 4160 SetupFor the 4500 Happijac setup the replacement motor is the part # LC759927 but the 4160 motor has been discontinued. Best option is probably to replace the entire setup at this point since a motor replacement isn't available. For that you would want the part # LC736514-ELKIT.
view full answer... - How to Convert Manual HappiJac Model 4160 Jacks to ElectricCongrats on the new camper! I have a solution but there unfortunately is not a manual to electric conversion kit for the HappiJac 4160 series jacks. The reason an electric conversion will not work for your 4160 is that they have a two piece construction acme screw drive, and the roll pins that connect the acme screw to the upper assembly can shear with the clutch less motors. The Manual-to-Electric Conversion Kit for HappiJac Truck Camper Jack Systems item # LC733960-182524 will work for...
view full answer... - Replacement Camper Jack System For An Older HappiJac 4150 SystemThe new Replacement Clutchless Motor Head for HappiJac Truck Camper Jacks # LC759927 are not going to work with your older HappiJac 4150, unfortunately. Since the correct replacement motors for your system have been discontinued, the only viable solution is for a complete replacement. I know it's not an ideal situation, however should you be interested in this, I recommend the: -HappiJac Electric Truck Camper Jack System # LC736514-ELKIT. This system is going to be the correct replacement...
view full answer... - Are There Rebuild Kits for HappiJac Electric Truck Camper Jacks Model 4100 and 4500I do have an option for you but we don't have rebuild kits for the HappiJac Electric Truck Camper Jacks Model 4100 and 4500. These jacks have been discontinued and I recommend a full replacement system, the HappiJac Electric Truck Camper Jack System part # LC736514-ELKIT which is designed to replace both of these models. This is a complete system that comes with new jacks, motors, wringing, control box, and remote.
view full answer... - Are the HappiJac Swing-Out Extender Brackets Compatible w/ Atwood Electric Jacks?I am sorry Mike but they do not. The HappiJac Swing-Out Extender Bracket for Dual Wheel Chassis Truck Camper Jacks item # HJ54FR you referenced are not compatible with Atwood electric jacks. Additionally, there isn't a similar extension for Atwood jacks because they have been discontinued. The Swing-Out Extender item # HJ54FR is only compatible with electric camper jacks from Happijac, like the 8,800 lb HappiJac Electric Truck Camper Jack System - 34-1/2" Lift item # LC736514-ELKIT the...
view full answer... - Manual To Electric Conversion Kit for Atwood Jacks On A 2000 Lance In-Bed CamperThe Atwood jacks on your 2000 lance in bed camper are not compatible with the Happijack conversion kit Item # LC733960-182524. If you are looking to add an electric jack set up to you camper, I recommend Item # LC736515-ELKIT for the 11'200lb kit and Item # LC736514-ELKIT for the 8'800lb kit as we do not offer conversion kits for Atwood jacks.
view full answer... - Replacement Jack Leg And Motor For A 4100 Series HappiJac Electric Truck Camper Jack SystemTo replace the broken jack and motor of your 4100 Series HappiJac Electric Truck Camper Jack System # LC736514-ELKIT you'll just need the Replacement Jack # LC736514 and Motor Head # LC759927.
view full answer... - Replacement HappiJac Electric Jack system For Discontinued 4100 Series JacksThe HappiJac Electric Truck Camper Jack System # LC736514-ELKIT is the replacement kit for the 4100 series jacks that you have. It uses the same Replacement Jack # LC736514 and Motor Head # LC759927 for the front and rear jack positions.
view full answer... - Truck Camper Jack Replacements for 1998 Big Foot Truck CamperYour truck camper jacks are more than likely obsolete due to the age of your 1998 Big Foot truck camper. So unless they have been updated already you will need a new set of jacks. You can replace them with a HappiJac Electric Truck Camper Jack System # LC736514-ELKIT. This kit will allow you to operate each jack individually or control them all at once via the remote control. You can also go with a HappiJac Manual Truck Camper Jack System # LC736514-4. To operate these you will need...
view full answer... - HappiJac Electric Camper Jack System To Replace Obsolete Atwood Slide In Camper JacksIt appears that your current jack motor is going to be obsolete. You will need to replace your jacks with one of the following HappiJac sets if you wish to still use electric motors. The HappiJac Electric Truck Camper Jack System # LC736515-ELKIT is rated for 11,200lbs for all 4 jacks. These have a 36-1/2" lift with a 51" outer tube height. We also have the HappiJac Electric Truck Camper Jack System # LC736514-ELKIT. These are capable of lifting 8,800lbs for all 4 jacks. And have a 34-1/2"...
view full answer...
Do you have a question about this Camper Jack?
Info for this part was:
Edited by:
Lindsey S
Expert Research:
Jameson C
Updated by:
Wilson B
Updated by:
Michael B
Written by:
Kristina F
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Katrina D.
10/24/2023
I am sorry that these arrived in this poor condition. You were correctly informed, we do not have any more of them in stock. Same with that replacement piece, we do not carry that either. Let me get you in touch with the manufacturer to see if they can get a replacement sent out to you right away.