Anti-Rattle Trailer Hitch Receiver Lock for 2" Hitches - 2-5/8" Span

Anti-Rattle Trailer Hitch Receiver Lock for 2" Hitches - 2-5/8" Span

Item # 63232

lowest price pledge

Our Price: $31.95

Hitch Locks

Orders above $50 qualify for Free Shipping

Shipping Weight: 1.36 lbs

Estimated Delivery: Thursday, December 20

Enter a zip code for a more accurate estimate.

Arrives before Christmas with Ground or Free Shipping.
Quantity: 
In Stock
Lets Go Aero Hitch Locks - 63232
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
Please enter a valid email address.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

pop out icon replay 360 icon
horizontal rotate icon

Product Images

3d view icon
Lets Go Aero Hitch Locks - 63232
Lets Go Aero Hitch Locks - 63232
Hitch Locks 63232 - Fits 2 Inch Hitch - Lets Go Aero
Hitch Locks 63232 - 2-5/8 Inch Span - Lets Go Aero

In Use/Installed

Lets Go Aero Hitch Locks - 63232
Anti-Rattle Trailer Hitch Receiver Lock for 2" Hitches - 2-5/8" Span 2-5/8 Inch Span 63232
Lets Go Aero Keyed Unique Hitch Locks - 63232
63232 - Keyed Unique Lets Go Aero Universal Anti-Rattle Lock
Lets Go Aero 2-5/8 Inch Span Hitch Locks - 63232

Customer Photos

Videos


  • Fits 2 Inch Hitch
  • Universal Anti-Rattle Lock
  • Lets Go Aero
  • Keyed Unique
  • 2-5/8 Inch Span
  • Spring-Loaded Pin
This anti-rattle hitch pin dramatically reduces any movement or vibration of your ball mount in your hitch. Included lock ensures security for your hitch accessory. Designed for use on hollow-shank ball mounts and accessories. 5/8" Pin diameter. Call 800-298-8924 to order Lets Go Aero hitch locks part number 63232 or order online at etrailer.com. Free expert support on all Lets Go Aero products. Guaranteed Lowest Price and Fastest Shipping for Anti-Rattle Trailer Hitch Receiver Lock for 2" Hitches - 2-5/8" Span. Hitch Locks reviews from real customers.


  • All Info
  • Reviews (471)
  • Q & A (457)
  • Videos (1)
  • Photos
  • Why etrailer?

Lets Go Aero Hitch Locks - 63232

This anti-rattle hitch pin dramatically reduces any movement or vibration of your ball mount in your hitch. Included lock ensures security for your hitch accessory. Designed for use on hollow-shank ball mounts and accessories. 5/8" Pin diameter.


Features:

  • Trailer hitch receiver lock is used in place of standard pin and clip to prevent theft of ball mount or hitch-mounted accessory
    • Secure your bike rack, cargo carrier, hitch cover, and more to your trailer hitch
  • Anti-rattle pin reduces play and vibration in the hitch connection
    • Place block with spring inside shank of ball mount or hitch accessory
    • Slide ball mount or accessory into hitch receiver
    • Insert pin through hitch pin hole and anti-rattle block with spring
    • Twist pin with included wrench so ball mount or accessory is pulled tight against side of hitch receiver wall
  • 90 Degree, barrel-style lock comes with 2 round, rubber-coated keys
    • Weather-resistant rubber dust cap keeps cylinder free of debris
  • Zinc finish is corrosion resistant
  • Sturdy steel construction


Specs:

  • Application: 2" x 2" trailer hitch receivers
    • Ball mount or hitch accessory must have a hollow shank
  • Pin diameter: 5/8"
  • Inside pin length (span): 2-5/8"
  • Overall length: 5-1/2"
  • 30-Day warranty


Notes:

  • This lock will not work with some factory 2" trailer hitches that have an outside width wider than 2-5/8". If a longer pin length is needed, see hitch lock SHP2040-XL
  • This device can only be used with hollow-shank ball mounts and hitch accessories.

The Silent Hitch Pin from Let's Go Aero takes the rattle and play out of the connection between your trailer hitch and your ball mount or hitch accessory. The unique design features a sturdy steel block with an attached spring that sits inside the shank of your hitch-mounted accessory.


Silent Hitch Pin DiagramSilent Hitch Pin Close Up

Place the block inside your ball mount or hitch accessory, and line up the hole in the block with the pin hole in your ball mount. Slide your ball mount into your hitch and insert the hitch pin. To activate the anti-rattle device, just twist the pin with the included wrench to tighten it down. Doing this will pull the accessory up against the wall of your hitch receiver, thus keeping the accessory from moving around inside your hitch. No more annoying clanking or vibrating.


The 90 degree, barrel-style lock goes on the end of the anti-rattle pin to provide security for your hitch-mounted accessories. Two round, rubber-coated keys are included with the lock. A sturdy rubber dust cap comes attached to the barrel lock so that you can easily cover the lock cylinder, thus ensuring that no dirt or grime will get in to damage the lock.



SHP 2040 Let's Go Aero Silent Hitch Pin Antirattle Device and Lock for 2" Trailer Hitches






Video of Anti-Rattle Trailer Hitch Receiver Lock for 2" Hitches - 2-5/8" Span


Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Lets Go Aero Hitch Locks 63232 Review


Customer Reviews

Anti-Rattle Trailer Hitch Receiver Lock for 2" Hitches - 2-5/8" Span - 63232

Average Customer Rating:  4.6 out of 5 stars   (471 Customer Reviews)

This anti-rattle hitch pin dramatically reduces any movement or vibration of your ball mount in your hitch. Included lock ensures security for your hitch accessory. Designed for use on hollow-shank ball mounts and accessories. 5/8" Pin diameter.

- 63232

by:


The product accomplished exactly what I wished it would: it securely locks the adapter to the hitch, while reducing the sway. I used this product to secure and to lock a 1.25" Thule 4-bike rack and adapter to a 2 inch hitch. [there is no 1.25" hitch for my vehicle, so I had to get a 2" hitch and adapter]. The etrailer representatives were extremely knowledgeable and helpful in guiding me to purchase the exact product to serve my needs. Great service, fast delivery, low prices, quality products. This company is top notch all around. 437698


Comments

The product continues to be great and exactly what I wanted.

Rob G - 09/29/2018

44136

- 63232

by:


I purchased this for use on my 2017 VW Alltrack with an Ecohitch 2 in receiver. I have a Thule T2 Classic bike rack with a 1-1/4 inch shank and didn't want to purchase the replacement shank. I instead purchased # HT02 to allow the receiver to accept the smaller 1-1/4 and # 63232 to stabilize the rack and stop the rattle. The combination is perfect. # 63232 acts as both an anti-rattle device, as well as a hitch lock. Installation took 5 minutes and was super straightforward. Because the pin is threaded, be sure to use a torque wrench to not accidentally over-torque the pin and strip the threads or just tighten until the rattle stops. 435250


Comments

A year in and the the Lets Go Aero Anti-Rattle Trailer Hitch Receiver Lock still does its job. The only issue that Ive run into is that I am unable to remove it from my hitch. The tubular metal sleeve that fits around the lock pin seems to have rusted itself locked. I havent been able to remove it and cannot remove my hitch rack as a result.

Ryan F - 09/23/2018

43909

If your hitch is open at the back using some WD-40 and spraying down the hitch lock and anti-rattle device as best as you can, and let it sit and try again to remove the pin. You may need to use a hammer and persuade the pin, but try not to damage the bolt head portion. If the hammer does not work you might try using an impact wrench and a socket, or a socket and a cheater bar to try to get the treads to spin free. Worst case scenario you may need to use a cut off wheel and cut down the hitch pin and then using a drill bit drill out either side to see and try to remove the stinger. Just make sure that you do not use a drill bit larger than a 5/8 inch (diameter of your hitch pin) or any kind of torch that would damage your hitch.

-- Rachael H - 9/25/2018


- 63232

by:


Item worked perfectly. Delivery was great. Would recommend etrailer.com for all your trailer needs. 438391


Comments

Everything fit and works great. Im really happy with your company. Thanks for asking.

AL R - 10/02/2018

44227

- 63232

by:


this little anti rattle trailer hitch receiver lock arrived one day earlier than scheduled so easy to install and better yet it does what they say it would do, stiffen up the hitch and no more rattle 562206



- 63232

by:


This seems like a very well made and sturdy product. I had no problems putting it on the first time. Very pleased. 553518



- 63232

by:


Great product and service! 557697



- 63232

by:


Ordered two, one for trailer hitch and one for bike rack. Already installed on bike rack and it is now solid as a rock. No more swaying. YAAAAA. I know it will be great for the camper as well. EASY to install. Also trailer is quick on delivery. Couldn’t be happier. 500644



- 63232

by:


Product came as advertised and easy to assemble. Researched several different hitch cargo carriers and decided on etrailer model was the most preferred for my family. Package arrived with no damage to product and took 10 minutes to assemble. Additionally purchased the anti-rattle receiver hitch lock and am impressed with the quality and ease of use. All potential customers should review extremely helpful videos about this product. Thanks for the quick and efficient service your company provided. 310904



- 63232

by:


Before using the Anti-Rattle Hitch Lock my receiver would move both sideways and up and down and sounded like the car was coming apart. I have a 2" hitch and after installing this new product I have used it four times as of this writing. My trailer is a utility 5x8 and I have hauled different items and weight and I have not heard a sound out of it. Even though it totally locks it from side to side play, I thought maybe there would be some up and down motion but for me, none at all. Very, very pleased!!!!! 110306



- 63232

by:


This ant-rattle receiver lock is one of those rare products these days that "does exactly what it says on the tin" ! It made my hitch carrier a snug fit on the receiver. Without it., there was some play and rock in the carrier ( which makes sense, it has to be a little bit loose in the receiver or you'd never get it in ! ) It was very easy to set up this hitch pin and it does a find job, well worth the money. The little wrench they give with it is a bit of a joke, I used a bigger one I had to hand to tighten it up. 293657


Comments

The anti-rattle receiver lock was excellent for the first number of uses, but it is not working so well any more. It just seems to have gotten difficult to use. The spring that goes inside the carrier stem has gotten deformed and doesnt keep the nut that goes inside the stem in place anymore. So it tends to slide around when the carrier is out of the receiver and then it is fiddly to get it back in place. Also, I cant seem to get the lock to tighten up properly so that there is no play in the carrier. Originally, it would tighten up really well and there was no play at all, now it doesnt tighten like it used to, theres always some rattle in the carrier, not much, but its not perfect.I was thinking Ill just have to get another one, because it did work so well initially.

TSL - 10/17/2017

29465

- 63232

by:


The product I ordered is wonderful. Lightweight and is large enough to carry my scuba tanks and wet gear which I had NO intention of placing in my new Infiniti. It arrived quickly and took about 40 minutes by myself to put together. Customer service answered all my questions and the whole transaction was painless and professional. if I ever need another trailer, etrailer is the place I will purchase from. 501435



- 63232

by:


This device works great and it arrived even sooner than I had expected. Had no problems installing it. Just took a few seconds. Really stops rattling and stabilizes anything I put into the 2" receiver on my vehicle - boat trailer, bike rack, etc. 561152



- 63232

by:


Originally I purchased the more universal SilentACT which I was not very pleased with, so I decided to opt for this 2" specific lock instead. I am glad I did! This this is much sturdier and better built as well as functions as intended when installing. I am very happy with this purchase. 553798



- 63232

by:


I learned about this product when searching for a way to eliminate the rattle and sway of my Hidden Hitch Class III 2" Ball Mount that I am using to mount my Swagman XC Tow Mount Bike Rack on the back of my RV. The recommendations at eTrailer helped me figure out exactly what to do by using this Anti-Rattle pin and lock! And, coupled with the Road Master Quiet Hitch for 2" Trailer Hitches - RM-061 - there is no sway from left or right and no up or down movement either!!! Items came quickly and work in tandem perfectly. My bikes ride solid and safe! Be sure to periodically check the bolt tightness. 158840



- 63232

by:


Great product. I had ordered the 2"x2" Class III Draw-Tite Max-Frame Trailer Hitch Receiver for my 2018 Mazda CX-5 from eTrailer, item # 76138, which installed perfectly thanks t the excellent installation video on eTrailer's web site, but only to to find out that my bike rack is designed for a 1-1/4"x1-1/4" hitch receiver. I then ordered the Anti-Rattle Trailer Hitch Receiver Lock for 2" Hitches from eTrailer, item # 63232, plus the Hitch Adapter 2" to 1-1/4" Trailer Hitch Receiver - 7" Long from eTrailer.com, item # 80300, after consulting with an eTrailer customer representative, who BTW was very helpful. The installation of the lock and adapter was a breeze, thanks again to the excellent video on eTrailer's web site, and the whole assembly is extremely sturdy with all rattling sounds eliminated. I would say that the products so far have been every penny worth. 496002



- 63232

by:


Works perfect for over a year now. I use it with the 24x60 Reese Cargo Carrier and everything is tight with no wobble. 566256



- 63232

by:


This is the second of these hitch pins I have ordered from etrailer.com and I absolutely love them. They are very stout and my hitch and vehicle are very secure with NO wobbles. Thank you to Jennifer B. for getting this to me in such a timely manner!! 148731


Comments

Still working great!

Gaff P - 08/26/2015

14564

- 63232

by:


the very first time I installed this product it took 2 minutes to install and 4 hours with a hand saw to remove. It cross-threaded almost immediately, and because of the nut being internal to the hitch, you can't easily cut it off. I already broke two ratchets on this thing. There is not enough clearance for a sawzall so I have been using a small keyhole saw for the past 4 hours and still not done. Do yourself a favor and just use a half inch hex bolt and nylon locknut instead of this piece of crap. 205896



- 63232

by:


I bought this to lock up a hitch extension to a hitch extension that I didn't want to be stolen. Many thanks to eTrailer for helping me out on this. I had originally ordered a hitch lock that was not compatible with my setup. Customer Service emailed me before shipping the order, and I was able to change the order before buying the wrong item. The lock comes with two keys, and the anti-rattle mechanism works well. After installation, there is NO side to side movement between the extension and the hitch. I did notice a slight amount of up and down movement, but I installed a quiet hitch in conjunction with this item, which eliminated all movement entirely. It's a solid device for the money. I did not give it top marks, because of the slight up and down movement. Don't let that stop you, though. I'm just really picky. 10533



- 63232

by:


This is the PERFECT solution for eliminating hitch-mounted carrier movement and noise. The product is dirt-simple to install, just place and align the spring nut into the carrier's hollow shank, install the carrier, insert the pin and snug it down with the provided tool, then lock everything in place! Everything is safe and secure. No more movement. No more noise. And no chance of carrier theft. Thanks etrailer.com for a great customer experience. 81672


Comments

A year later, and everythings still perfect with the Lets Go Aero Anti-Rattle Trailer Hitch Receiver Lock!

John C - 05/23/2014

4391

- 63232

by:


I'm using this to lock my bike rack to my reese hitch. This is a great locking device, very secure. I use a ratchet & socket to tighten it so there is NO Rattle or sway of the bike rack. The metal is corrosion free so far. I take it off for the winter when the salt is starting to hit the roads. It comes with 2 keys and has a nice rubber keyhole cover. I just purchased another one for my sister. I think it's worth every penny. eTrailer is very easy to order from and has great communication and customer service. 200647


Comments

Over a year of use and Its still working like when it was new. Im very satisfied!

Hutch - 06/03/2016

18264

- 63232

by:


Seems to work somewhat as advertised. Side to side motion is eliminated but up and down motion is still there, although lessened. 146702


Comments

Still working the about same. Shimmed the up down and tightened the bolt to keep out more of the vibration. Lock seems a little fussy.

J.Wiz - 08/14/2015

14250

- 63232

by:


This product was hard to fit into my curt hitch/curt carrier. However, once it was in, it worked like a charm. It fits so tight that it really wouldn't matter if it was a locking hitch or not. (poor attempt at a joke) I didn't have any rattling or fear that my carrier was going to be stolen. If anything, just having it gave me a peace of mind. It was incredibly easy to install. Just slip the part with the spring into whatever your mounting, slide it into the hitch, and slip the remaining parts in, screw, lock, done. Simple. The not-so-simple was attempting to put the remaining parts in with how tight a fit it was, had to loosen it a bit, then place them in. Not a big deal, and certainly not a reason to not purchase it. 218874


Comments

I dont have anything further to add for the products yet. However, we have a cross-country trip planned later this year that will put all the products we purchased from etrailer.com to the test. I will try and provide a review for you after the trip.

Sam - 08/18/2016

20374

- 63232

by:


Like the cargo carrier and anti rattle lock. The carrier goose neck shank elevated carrier greater ground clearance. 449559



- 63232

by:


I selected the 24x60 Curt Cargo Carrier (#C18153) to assist with moving students in/out of college dorms. The carrier was very easy to assemble and attach to the vehicle. I chose the anti-rattle trailer hitch receiver lock (#63232) to ensure noise was minimized when on the road - works great! I also added a cargo carrier LED light kit with mounting brackets (#98174LED, #BK70BB) and a Hopkins heavy-duty 7-way to 4-wire coiled adapter (#HM47065). As others have commented, the light kit wiring harness is not long enough to reach the vehicle plug. The coiled adapter provided a great solution. Using the eTrailer web site has taken the mystery out of finding cargo moving solutions. 372290



- 63232

by:


UPDATE : Originally posted that it was to short and could not get the lock on . I called and Ricky advised to remove the split washer to see if that would allow the lock to fit . When I tried to remove the pin , the threads must have stripped and the pin would not move . After splitting a 5/8 socket and cracking a 16 inch cheater socket bar , the shaft broke in the nut ( which is inside the receiver ) . It is spring loaded , so my wife pushed on the nut & spring from one side , protruding the shaft out the other side and I was able to cut through the shaft . This took more than 2 hours to accomplish . Unable to get in contact with Ricky again , I called the general customer service # , advised them of all of this and they are sending me return label . Upon ordering this item , I called and ask about some reviewers who had had similar problems = They advised the company had changed from coarse threads to fine threads and it was no longer a problem . They advised they were sorry this happened , but now I also need to replace a 5/8 socket and 16 inch socket bar... I do not recommend this locking anti tilt hitch pin 210038


Comments

Yep. Happened to me too....

-- comment by: Rick - 10/31/2015

15747
Comments

Has this been resolved or is it still an issue?

-- comment by: Andrew - 12/06/2015

16071

Thanks for your question. We have coordinated with Lets Go Aero and they have updated the design and replaced our stock of this hitch lock in the beginning of August 2015.

-- Rachael H - 12/7/2015


- 63232

by:


Item exactly as described and very easy to install . Delivery was updated with status and fast . Thank you 565236



- 63232

by:


Works great, sometime it gets jammed up during alignment and I am never quite sure how tight to screw the thing in. I prefer to use a socket wrench over the included one. Make sure to remember the order of assembling the components. The product image on the far left is actually broken down into 3 separate sub-components. 1) shaft 2) block 3) end lock cap. The block sits in the channel of whatever is being plugged into the hitch. When you insert the shaft through the holes it must be done so from the opposite side you place the block. In effect you point the spring toward the lock cap. I don't hear a rattle as we drive unless we are rolling over rough terrain, then again I drive a minivan so I don't seek out rough terrain to test noise levels. :) I would like to give a 6th star to the service rep who put me in contact with the manufacturer. I (or someone in my party) lost a key on a trip so I wanted to get another one without purchasing a new set. (FYI the replacement keys are only slightly less expensive than the unit, so be careful not to lose one) That was an above and beyond customer scenario and I appreciated the quick support!!! 399725



- 63232

by:


Just wanted to do a follow up with you in regards with an anti rattle pin I had purchased from you before the holidays. Not sure if you need my order number or not to prove it but just wanted to give some feed back. I'm happy I purchased it so I wouldn't hear any rattling. It did take more torque than what's mentioned in the instructions. I did make sure though it wasn't to much so it wouldn't break or be ruined. I should have done more research with pricing but already did research on what kind and who to use when buying so I assumed etrailer was the place to shop & buy. I did very much glad I was able to talk with you,help me out and figure out what I was looking for. Giving me a my options,not pressuring me, being so helpful making it easy to purchase and delivery. When I had no idea what I was getting into you did make it extremely comfortable,personable and customer friendly helping me out every step of the way. 466038



- 63232

by:


etrailer.com shipping sucks. Every single package that I have received from etrailer.com has arrived at my house with boxes stuffed inside more boxes that do not fit properly and cause the boxes to get smooshed together. It's a miracle that the product inside the boxes were not damaged. Boxes arrive at the house with parts of the cardboard missing or peeled off or flaps ripped open or looking like an accordion. As for the product, having survived its perilous journey, it works as designed. Stops vibration, thus stopping noise. I should probably sound more thrilled, but I have never had a hitch accessory rattle on me thus I don't have a before and after comparison. I was fortunate to have found this item before installing any hitch accessories on my vehicle. Final verdict...you won't be disappointed. The wrench that comes with it is worthless. Don't bother with the included wrench. Install it using a ratchet with appropriate socket. Keep the wrench in the vehicle for emergencies. Buy it and enjoy! 170430



- 63232

by:


I was disappointed in the performance of this item. Although it is a good design, and does almost completely eliminate side to side carrier movement within the receiver, I experienced the same problem that a number of other individuals experienced. That is that once tightened in place within the carrier tube when it is mounted to the receiver, the threads on the blot had cross threaded with the large nut, and no amount of force was able to unscrew the blot form the nut. Eventually I was able to get the bolt out by cutting both exposed ends of the blot with a cut-off wheel on a dremel drill (space was very limited due to the design of the factory hitch on my 2015 Wrangler) and then use a center punch to force the remaining section of bolt back into the tube, allowing the carrier tube to be removed form the receiver. I read more of the many reviews for this item, and I see that others have had this exact difficulty. I think the problem is either in the quality of the material, or in the threading process of the bolt /nut. Either way, I have decided to stay away from this design. 187849



- 63232

by:


I WOULD HAVE GLADLY RATED THIS CARRIER WITH 5+ STARS; IT IS EXCELLENT IN EVERY WAY, except for the locks. IMO, they are too lightweight for a carrier of this value, not only in terms of securing it’s cargo from theft, but also in ease of use. I find it difficult inserting the keys into the locks to operate them. To alleviate my concern for securing the carrier and cargo from theft, I use a 20’ locking cable system when leaving it overnight. With that said, I would (and have) highly recommend this carrier to others. 443212



- 63232

by:


A bit on the pricey side, but does what it advertises. Happy with the product after using on a few camping trips. I have this cargo carrier: http://www.etrailer.com/Hitch-Cargo-Carrier/Pro-Series/63153.html. We load it down with hundreds of pounds of camping equipment and use the hitch lock to secure it from moving. We also camp in the backcountry using poor access roads at times and the lock keeps the heavy loads from shifting on uneven terrain. I would recommend this product to anyone that is using either a bike rack or cargo carrier and is trying to reduce movement of the accessory. 145780



- 63232

by:


Bought one of these and it broke. Going to try another. etrailer.com has excellent service and was able to get a replacement. 173465


Comments

After one year it is still working fine, like my others. Etrailer has great service.

Gaff - 02/13/2016

16780

- 63232

by:


I can only rate how easy it was to install as I won't use till late sept. but I read reviews and I will be keeping an eye on keeping the nut tight. ETRAILER shipped very fast as always. 97807


Comments

lock is working good the rattling noise is gone I still check the nut each time I hook up, I say it is a good product. The wrench is a bit weak but I replaced it with a craftsman.

chuck - 09/01/2014

6595

- 63232

by:


I installed the anti-rattle tow hitch pin as soon as I got it. It really locks the Swagman bicycle carrier in place so there is no side-to-side movement. I have not yet driven with it for any distance to see if the pin loosens up due to road vibration, but I expect that it will not. 131245


Comments

Works great. Hitch lock does not loosen after driving, even on a bumpy road.

George S - 05/19/2015

11841

- 63232

by:


Installed the nut and finger treaded the bolt into the assembly and nut. Once finger tight used the wench to tighten it all up. Upon removal I was unable to loosen the bolt with the wench. Working the bolt with a socket wrench I was able to get the bolt out but treads on both the bolt and the nut are damaged. I'm amazed that this big bolt and nut could be stripped so easily. 177408


Comments

I had exactly the same problem!

-- comment by: Kelly L - 03/20/2015

10153

- 63232

by:


Exactly what I was expecting..! great p roduct! 134216


Comments

morning Patrick.. as I said in my review.. GREAT PRODUCT!! I installed it and its never been off, completely forgot about it.. and its doing a great job, it usually carries a Thuie 918XTR bike rack and it doesnt move an inch! even in our harsh Guadalajara, Mexico roads.. its awsome.. keep up the good work.

Eduardo O - 06/09/2015

12409

- 63232

by:


This anti-rattle receiver lock works as advertised, and is easy to install. I have used it about a dozen times since I got it, towing my teardrop camping trailer or my small utility trailer. The lock prevents lateral movement of the ball mount, but depending on your receiver, there may be a slight amount of vertical movement, but I just use a small piece of plastic wedge material (available at most hardware stores) between the ball mount and the receiver to eliminate any vertical movement. 446506



- 63232

by:


Had issues from day one. It was hard to screw the bolt in to the nut. I guess it's some thread problem on the nut or the bolt. from the factory . Now it has gotten actually so bad that after using it for a several months and I cannot even use it anymore. When it worked, it was wonderful. Noise reduction due to rattle elimination is the best thing ever for a residential usage. I had almost no noise or rattle effect pulling around 1000 lbs with a 2011 Nissan Quest, highway or fully loaded in the city. I would buy similar product anytime. Maybe more expensive so that it holds for couple of years. 259911



- 63232

by:


Completely eliminates rattle as promised. Easy install. Thanks, Etrailer. 562904



- 63232

by:


Great product but does not work with the product (bike rack) that I bought it for. The tube of the bike rack (that slips into the hitch) needs to be open so that the square piece (pictured on the pin above) can slide into the tube. The tube on the bike rack that I bought is threaded all the way through so there is no way for it to fit in there. Make sure that the equipment you're going to use this on has an open 2 inch tube and I'm sure it will work great. 558410



- 63232

by:


The anti-rattle pin was a great add-on to my Pro Series Cargo Carrier (63153). Without it, the carrier tongue fitted loosely in the receiver and the carrier wobbled. I'm certain that the noise and movement would have bothered me on the road. However, the anti-rattle pin tightened the tongue to the receiver so well that they became like one piece. No noise and rock solid stability. Easy installation, and the locking end cap adds some security, too. I highly recommend this product. 95572



- 63232

by:


It works great just that I would need it keep the hitch from rattling. 558570



- 63232

by:


Perfect fit with the key lock turned perpendicular to the threaded hitch pin. 558357



- 63232

by:


This did not work. I have a 12" extension with a solid shaft that goes into the receiver. I will be returning it. 550334


Comments

This anti-rattle part 63232 does require a hollow shank to install. I recommend using a wedge style anti-rattle such as part # 93347. The wedge anti-rattle part # 93347 wedges between the receiver and hitch accessory to eliminate rattle.

-- Heather A - 08/06/2018

41986

- 63232

by:


This product works really well. I'm actually looking to buy a second one. 550864



- 63232

by:


This solved all the movement in our bike carrier at the receiver mount. Great product easy to install the lock was a bonus. 540422



- 63232

by:


Perfect for my fully loaded carpod. My carpod was so quiet. I felt like there was nothing behind me. 528447



- 63232

by:


Did just what I ordered it to do 527670


56
478
Show More Reviews

Ask the Experts about this Lets Go Aero Hitch Locks
Do you have a question about this Hitch Lock?


  • Best Hitch Recommendation for a 2015 Subaru Forester
  • For your 2015 Subaru Forester I would strongly recommend you go with a 2 inch hitch over a 1-1/4 inch hitch. 2 inch hitches have more capacity and have more flexibility for accessories since there are way more things designed to fit a 2 inch hitch over a 1-1/4 inch hitch. Also a 2 inch hitch will carry a cargo carrier much smoother due to it's higher capacity. There would be much less bouncing like you described. I would recommend the Draw Tite hitch part # 75876. This would be a great...
    view full answer...

  • Best Anti-Rattle Device Recommendation for a 2 inch Ball Mount
  • The most popular anti-rattle device we carry that is designed for use with a 2 inch hitch would be the part # 63232. This will install in the hollow shank of a 2 inch ball mount and will secure it to the side of your hitch so that it stop rattling. It also doubles as a hitch lock. I attached an install video for you to check out as well.
    view full answer...

  • How to Reduce Excessive Trailer Noise (Banging/Rattling)
  • It sounds to me like the hinge pin on your trailer's tailgate is worn and is causing excessive movement which will result in a noisy ride. In order to secure the tailgate to the trailer while driving down the road I recommend using a set of ratchet straps like the Erickson Re-Tractable Ratchet Straps part # EM34415. In order to reduce movement and rattling from the ball mount inside the receiver tube you will want to use an anti-rattle hitch pin such as the Anti-Rattle Trailer Hitch...
    view full answer...

  • Recommended Trailer Hitch Receiver for 2017 Nissan Titan SV
  • For your 2017 Nissan Titan SV, I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver # 76154. This trailer hitch receiver is a strong round tube design that is easy to install. It has an integrated bracket for your trailer wiring bracket to give a really clean look and has a black powder coat finish over an e-coat base for great rust protection. For your trailer wiring, I recommend the Upgraded Modulite Vehicle Wiring Harness Kit with 4 Pole Trailer Connector (Includes Install...
    view full answer...

  • Locking Anti-Rattle Hitch Pin for Use with a 1-1/4 Inch Hitch and 1-1/4 to 2 Inch Adapter
  • The first thing you will want to look at is the shank of the adapter. If it is hollow then you can use locking hitch pin # SHP2082 or # 63147. But if the shank is not hollow then you will need to use a regular anti-rattle device like # 93347 and lock # 5200. I must warn you that the use of an adapter reduces the tongue weight capacity of the trailer hitch by 50 percent. So if the combined weight of the bike rack and bikes is more than half the tongue weight capacity of the hitch you...
    view full answer...

  • Tongue Weight Capacity of Hitch and Curt Cargo Carrier # C18153
  • If your 2011 Toyota RAV4 has a 2-inch hitch receiver like Curt # C13149 then the Curt Folding Cargo Carrier # C18153 will fit the hitch and will clear the rear of the vehicle even when folded. The Curt cargo carrier # C18153 provides 9-inches of clearance from its hitch pin hole even when folded and this is plenty for your RAV4 even if it has the rear spare tire. In terms of weight capacity the lowest-rated item in the system, between the vehicle, hitch and carrier, determines the overall...
    view full answer...

  • Highest Rated Weight Capacity Crossbars for a 2017 Subaru Forester
  • The highest weight capacity roof rack that we have for your 2017 Subaru Forester comes from Rhino-Rack and includes the Aero Crossbars, part # RRVA126B-2 for Black or part # RRVA126S-2 for Silver, and the SX Series Legs # RRSX100. This roof rack has a weight capacity of 175 lbs and will only fit your Forester is it has factory raised side rails that run front to back. If you have a naked roof with no existing rails or crossbars then you will need to go with the Thule AeroBlade Edge Roof...
    view full answer...

  • Ball Mount and Anti Rattle Lock Recommendation Similar to Boss Anti Rattle Ball Mount
  • The Boss anti-rattle ball mount that you mentioned essentially is a ball mount with a hollow shank that has an anti-rattle device built into it. The ball mount appears to have a standard 2 inch drop like the part # 2923. So what I would recommend is going with this ball mount # 2923 and then using an anti-rattle hitch lock like the part # 63232 which will give you exactly what you are looking for.
    view full answer...

  • Trailer Hitch Mount Cargo Carrier to Carry a Generator and Clear the Spare Tire on a Jeep Wrangler
  • If your generator will fit a 60 by 24 inch cargo carrier then Pro Series carrier # 63153 would be a great option. It measures 12-3/4 inches from the center of the hitch pin hole to he closest edge of the carrier. I have included a link to a video review for you. The carrier does not have built in anti-rattle capabilities, which is normal for cargo carriers, so I recommend adding locking hitch pin and anti-rattle device # 63232. If your generator will not fit the 60 by 24 inch dimensions...
    view full answer...

  • Anti-Rattle Device Suggestion while using a Towing Bike Rack and Pop Up Camper
  • For use while towing with your pop up camper trailer and hitch mounted towing bike rack, the best option would be to use the Anti-Rattle Device for a 2 inch hitch # 63232. This device will eliminate any additional rattling by pulling the ball mount portion of the hitch to one side. It also provides a secure locking mechanism for your hitch. Please keep in mind that this locking device can only be used on hollow hitch devices, it is also advised to remove this locking mechanism when...
    view full answer...

  • Lights And Accessories for Using Curt # C18153 Cargo Carrier on 2014 Chevy Suburban
  • The only difference between the two anti-rattle hitch locks you referenced is that the # 63232 is for 2 inch receivers and the # SHP2040-XL is for 2-1/2 inch receivers. Since your Suburban has the 2 inch receiver, you'd need the # 63232. If the 4 pole on your Suburban is fixed in place on the bumper, I'd recommend the # 9653P extension. The Curt # C18153 you're referring to isn't specifically designed for a light kit, so they're aren't any pre-drilled holes on the carrier to mount...
    view full answer...

  • Best Mobility Scooter Carrier for an RV
  • The best mobility scooter carrier we have for you is the Pro Series Steel Solo Cargo Carrier part # PS10401-10402. The reason I consider this to be the best is because it has the largest platform which is 47-3/4" long x 31-3/4" wide and a very long ramp which is 48" long x 31-1/2" wide. This will make loading the scooter much easier as the incline will not be nearly as steep. It has a 400 lb weight capacity and comes with reflector tape that improves the cargo carrier's visibility. I do...
    view full answer...

  • Ground Clearance Difference for Pro Series # 63153 and Curt # C18130 Cargo Carriers on 2008 Sienna
  • Both the Pro Series # 63153 and Curt # C18130 cargo carriers have an angled shank to provide better ground clearance than straight-shank types. The Pro Series has 2-1/2-inches of rise in the shank while the Curt has 3 inches of rise. Also the Curt carrier has the ability to adjust the placement of the carrier basket on the shank and includes the required hitch pin and clip, while the Pro Series does not. You can use part # PC3 or a locking anti-rattle hitch pin such as # 63232. The Pro...
    view full answer...

  • Can the Kuat Pivot Swing Away # PV20B and Spare Tire Carrier # C31006 Carry a 75 lb Tire
  • I spoke with my contacts both at Kuat and at Curt and they both said that it would be okay to use the Kuat Pivot Swing Away Hitch Extender # PV20B with the Spare Tire Carrier # C31006 to carry your 75 lb tire. The Kuat Pivot Swing Away actually has a weight capacity of 250 lbs so you won't have to worry about overloading this product. The Kuat comes with a hitch lock but you may want to also use the Hitch Receiver Lock # 63232 to stabilize and lock the spare tire carrier. The Dead...
    view full answer...

  • Anti-Rattle Device Recommendation for Hitch Extender
  • Since your hitch extension is going to have a hallow shank I would recommend the anti rattle device part # 63232. This will work great as a way to reduce the movement in the hitch and extender. Check out the review video I attached as well.
    view full answer...

  • Curt Folding Cargo Carrier # C18100 Compatibility With Trailer Hitch Receiver On 2013 Toyota Sienna
  • The 19x60 Curt Cargo Carrier for 2" Hitches - Aluminum - Folding - 500 lbs # C18100 is 4-1/2 inches from the hitch pin to the closest edge of the carrier when folded up. As long as your hitch has that clearance you will be able to use it. The Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" # 76112 has 4 inches from the hitch pin hole to the outer most part of the bumper, so the carrier would be foldable with this hitch. The Curt hitch # C13105 has a hitch...
    view full answer...

  • What Trailer Hitch Receiver for 2013 Chevrolet Equinox for Use With a Cargo Carrier
  • Your 2013 Chevrolet Equinox can be equipped with two different sizes of trailer hitch receiver, either a 1-1/4-inch or a 2-inch. Since loaded coolers can be fairly heavy I will suggest you go with a 2-inch hitch to give you the maximum carrying capacity for your coolers and other tailgating essentials. We offer the Draw-Tite # 75270, which has a 675-lb tongue weight rating. This will be more than adequate for the weight of a cargo carrier plus your coolers and other gear. This bolt-on...
    view full answer...

  • How to Reduce Movement of the Ball Mount Inside the Trailer Hitch Receiver Tube
  • It is very unlikely that the hitch pin hole on your Draw-Tite Trailer Hitch Receiver is worn causing the ball mount to slide back and forth. There is usually a little bit of play in the receiver tube opening with a ball mount and this can easily be fixed using an anti-rattle hitch pin like the Anti-Rattle Trailer Hitch Receiver part # 63232. This hitch pin has both anti-rattle and locking capabilities. It comes with everything needed for installation including two keys. As long as the...
    view full answer...

  • Anti-Rattle Device Recommendation for MaxxTow Adjustable Ball Mount # MT70067
  • The clearances are actually pretty tight between the adjustable channel, shank, and pins of the MaxxTow Adjustable-Height Ball Mount # MT70067 which means it would move a little bit but would not be a super obnoxious rattle. To get rid of the movement between the hitch and the shank of this ball mount though we have the # 63232 which would work well. This doubles as a hitch lock too.
    view full answer...

  • Need 2-Inch Hitch Extender With Hollow Shank for Use with # 63232 Anti-Rattle Receiver Lock
  • We do offer several 2-inch hitch extenders that have a hollow shank to allow use of an anti-rattle hitch lock such as the Lets Go Aero # 63232. These are available in various lengths. Do please note that whenever any extender is used it will reduce your hitch capacity by 50 percent. For example, we offer the Brophy 7-Inch Extender for 2-inch hitch receivers, part # HE06. We also offer an 18-inch extender from Hidden Hitch, part # HE18. If you need a dual receiver extension we offer...
    view full answer...

  • Best Trailer Hitch and BIke Rack for 4 Bikes on a 2018 Honda Pilot
  • The best trailer hitch receiver we have for your 2018 Honda Pilot is the Curt Trailer Hitch Receiver part # C13146. This hitch installs use pre existing holes in the frame rail so there will be no drilling required. You also will not need to cut or trim as you can see in the attached install vehicle which is what makes it the perfect trailer hitch for you. Please keep in mind that a trailer hitch will only fit your vehicle as is if it has a 18" diameter or smaller spare tire. If you do...
    view full answer...

  • Locking Hitch Pin Recommendation for Use with the Curt Cargo Carrier part # C18152
  • For a locking hitch pin to use with the Curt Cargo Carrier part # C18152 I would recommend the part # 63232. This will lock the carrier to your hitch as well as work as an anti-rattle device.
    view full answer...

  • Can I Use the Aluminum Shank Adapter # 853-7292 with My Thule 937 Hitching Post Pro
  • To be able to use your Thule Hitching Post Pro 937 in the 2 inch hitch on your truck you will need to use the Brophy Trailer Hitch Adapter, item # HT02, see video link. Along with this adapter you will also need an Anti Rattle device for the 2 inch receiver to help keep the bike rack from bouncing. The anti-rattle hitch pin, item # 63232, would be a good choice for this application. I spoke with my contact at Thule on your behalf and found that the Thule Replacement Aluminum Shank Adapter...
    view full answer...

  • Is There a Light Kit Available for the MaxxTow Cargo Carrier # MT70108
  • Even though there are no specific light kits made for the MaxxTow Cargo Carrier # MT70108, you can install the Rola LED Light Kit # 59516 using 2 of the Trailer Light Mounting Brackets # BK70BB. I have attached a picture of the brackets installed on the cargo carrier. You might also be interested in an Anti-Rattle Trailer Hitch Receiver Lock, like part # 63232, to help eliminate play and deter theft of your cargo carrier.
    view full answer...


Do you have a question about this Hitch Lock?




  • Why etrailer.com?

    At etrailer.com we guarantee:

  • Highest quality hitch locks for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate hitch lock information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Satisfaction Guarantee
    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Expert Research:
Michael L
Video by:
Andrew K
Expert Research:
Robert G
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Jameson C
Test Fit:
Nicholas E
Expert Research:
John H
Video Edited:
Patrick B
Updated by:
Adele M
Installed by:
Matthew K
Expert Research:
Adam R
Video Edited:
Dustin K
Photos by:
Jim W
Installed by:
Cole B
Photos by:
Amber A
Expert Research:
Jeffrey L
Video by:
Alan C
Photos by:
Sam P
Updated by:
Brian B
Video Edited:
Chris R
Installed by:
Hayden R
Photos by:
Zach O
Updated by:
Sarah W
Installed by:
Savanna B
Photos by:
Jeffrey L

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.




^
About Us
photos and videos
1,056,204

Original Photos & Videos

Produced to make sure you know what you are getting and you get exactly what you need.

installations
35,570

Installations Completed

To make sure products work and fit the way they are supposed to.

etrailer call center
2,476,511

Phone Calls & Emails Answered

1,125,924 phone calls and 1,350,587 emails to help find the right solution.

etrailer training
400+

Average Hours of Product Training

We get to know our products firsthand so experts can better help you.

etrailer service
71

Years of Quality Customer Service

Assisting our neighbors and customers, face to face at the counter.

etrailer experts
193,357

Pages of Expert Information

Created to make sure you have all the answers to your questions, from real experts.