Pin and Clip Recommendation for a Curt Cargo Carrier part # C18153

Updated 11/12/2024 | Published 07/28/2015

Products Featured in This Question

Anti-Rattle Trailer Hitch Receiver Lock for 2" Hitches - 3-1/2" Span

(1774)

$43.19

etrailer Trailer Hitch Receiver Lock for 2" Hitches - Flush - 2-5/8" Span - Chrome

(3663)

$23.33

Question:

Is it correct that this carrier does not come with a pin and clip? If so, which pin and clip would be best to order? I will be using this carrier on a 2013 Toyota Sienna LE AWD. Any advice as to wether this will work on my vehicle? Thank you.

asked by: Rachel C

Expert Reply:

As long as you have a 2 inch hitch installed on your 2013 Toyota Sienna the Curt Cargo Carrier part # C18153 would fit and work well for you. It does not come with a pin and clip but you have a couple options.

For a standard pin and clip you would want part # PC3, for a locking one part # e98880, and finally for a locking anti-rattle one you would want the part # 63232.

expert reply by: Jameson C

Howard

11/11/2024

I’m looking for a pin for my cargo carrier the size I need is 3/4” x 3” It uses 4 pins total A straight pin will work or bent pin in the size I stated

Jameson C.

11/11/2024

@Howard We have the part # 63259 which is 3/4 inch diameter and has usable span of 4 inches.

Howard

11/12/2024

@JamesonC I only need 3/4”x 3” usable length in a straight pin or a bent hitch pin Do you know where I could possibly find them Don’t want a 4” usable length I want to keep all the pins same size I have one bent pin that is 3/4” x 3” and two straight pins 3/4” x 3”