Curt Class 5 Universal Weld-on Hitch w/ Brackets - 2" Receiver - 44" Wide
(89 reviews)
Price: $212.39
In Stock
Curt Class 5 Universal Weld-on Hitch w/ Brackets - 2" Receiver - 44" Wide
Item # C47CR
Retail:$291.95
Our Price: $212.39
You Save: $79.56
In Stock
Need help with installation?
Locate installers near me- All Info
- Reviews (89)
- Q & A (0)
- Photos
CURT Heavy Duty Receiver Hitch - C47CR
- 2 Inch Hitch
- Weld-On
- Class V
- CURT
- 18 - 44 Inch Wide
- 9 Inch Drop
This class V universal weld-on trailer hitch receiver with brackets has a 9" drop and is designed for use on service body trucks and utility body trucks.
Features:
- Universal hitch designed for use on service body trucks and utility body trucks
- Heavy-duty, universal side brackets included
- Adjustable side brackets slide along hitch body to match exactly the width of your vehicle frame before being welded to the hitch
- Black powder coat finish resists rust and corrosion
- Strong, secure weld-on attachment
- Solid construction for maximum strength and safety
- Assembled in the USA
Specs:
- Hitch body width: 44"
- Receiver opening: 2" x 2"
- Rating: Class V
- Maximum gross trailer weight: 16,000 lbs
- Maximum tongue weight: 1,600 lbs
- 1/4" Thick brackets
- Side brackets fit frames from a minimum of 18" to a maximum of 44"
- Bracket height produces a drop of 9" from the vehicle frame
- Limited lifetime warranty
Warning: All welding surfaces must be cleaned to bare metal or weld will not be the required strength and may void the warranty.
15927-92 Curt Class 5 Universal Weld-on Receiver Hitch and Brackets with 9" Drop
Installation Details
Tech Tip
Welding required
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
- Wrong item was ordered
- Arrived Damaged
Customer Reviews
Curt Class 5 Universal Weld-on Hitch w/ Brackets - 2" Receiver - 44" Wide - C47CR
Average Customer Rating: 4.8 out of 5 stars (89 Customer Reviews)
This class V universal weld-on trailer hitch receiver with brackets has a 9" drop and is designed for use on service body trucks and utility body trucks.
by: Brandyn02/15/2024
I think you guys should send me some ap parel!
by: Charlie11/28/2023
Exactly what we wanted. Worked perfect on our recent, extended trip to Alaska and back.
by: Chase08/15/2022
I welded this up on my 2004 GMC converted school bus, it worked great with minimal bumper notching
by: Lg02/12/2023
Heavy duty, wished it would put itself on my motorhome.
by: Jeffrey 01/02/2023
Easy to install
by: Robert 08/19/2023
Great!!!
by: Roger 08/23/2021
Super heavy duty.
by: Richard 08/01/2021
Great price, fast shipping and a quality product!
by: Kevin 03/28/2023
by: Chantal10/24/2023
by: James 04/12/2023
by: Phares02/25/2023
by: EAVgirl07/14/2023
It’s beefy and solid. The mounting bracket square holes had to be cut in a smidge and he added two more support bars.. but all in all. My welder said it would tow 11-12 k. Not the 16k I was told. But hey. I’m okay with that. There was a shipping issue which forced me to reschedule a few things, that is the only reason I gave 4 stars. Otherwise I am supper happy with how it turned out.
by: David01/24/2024
It is very well built and the powder coating is very tough, took a good grinding to get it off for the welds. Good price as well. I used it for my 2006 Bounder 35E, not because it was a high rate hitch, as I did not need one, but this was the only one that would lower the hitch to a more normal height from the ground. The old hitch was so high a 10" deep was not enough to use a trailer parallel to the ground. Now I can hook up a lot easier and not worry about scraping. Looks good too.
by: James08/19/2023
Great quality product from Curt . Can be easy installation depending on the application.. mine more difficult because of aluminum alloy frame, so will have to do some reinforcing.
by: Paul10/10/2022
attached this hitch to my 1984 American General 5 ton military truck. Had to do some modification to air lines and drill a few holes but it is perfect for pulling civilian trailers with the M 813.
by: Jon12/09/2023
I put this on my 03 Freightliner Columbia. It does everything I want it to. It is bolted and welded.
I like it so much that a bought another one and put it on my old school bus. That one is just bolted on.
by: Rodney07/09/2018
Very happy with this hitch. The size of the end plates matched the frame on our old truck and with the class V weight rating, our old truck can do a few other things around the farm now. Thank you.
by: Gilles 04/19/2024
Fast shipping
by: Derrick 09/13/2023
Added (welded) to our diesel pusher Motorhome and have no issues and really no worries while towing whatever we feel we need while camping.
by: Kem03/20/2023
Well, I really respect the fact that they waited for one year before asking for a review, they offer a 2 inch and a 2 1/2 inch receiver the 2 1/2 inch receiver would obviously be a larger rectangle to accommodate a half an inch, the vertical uprights I received had holes pre-cut to accommodate a 2 1/2 inch receiver I ordered a 2 inch receiver, needless to say, there was an abundance of slop, half inch gaps, requiring a lot of fabrication on either side of the vertical uprights, knowing this now, going with the 2 1/2 receiver should have saved a ton of unnecessary fabrication time.
by: Ryan 02/15/2024
Solid as stone!!
by: JohnnyFix09/24/2021
This hitch was exactly what was needed for my landscaping customer's small dump body truck. It replaced the original custom hitch with only minor modifications to accommodate the cargo body. I have done considerable work for this customer over many years. No issues reported with this job. All good!! Thanks to Curt and etrailer for great products and stellar service. —
25
89
Show More Reviews
See what our Experts say about this CURT Heavy Duty Receiver Hitch
- Heavy Duty Trailer Hitch Receiver for 2020 E-450 Class C MotorhomeSince there are no custom fit receivers for your 2020 E-450 motorhome you will need to use a universal hitch. The Curt Class 5 Universal Hitch # C47CR fits frames up to 44" wide. This is a weld-on hitch so we recommend taking it to a certified welder for installation. The maximum gross trailer weight of 16,000 lbs and tongue weight of 1,600 lbs is as heavy duty as it gets. Keep in mind, you will be limited by the towing capacity of your motorhome.
view full answer... - Removable Winch For 2007 Chevrolet Suburban OverlanderThe only option you have for the front of your 2007 Suburban is like this Curt front hitch # C31012. Since you have a custom built front bumper, you may want to get something like this universal weld on hitch # C47CR. This will have 16,000 GTW so it should be plenty strong. If you can make that work, you will be able to get the set up you're wanting. You could then get this Bulldog Winch Receiver Mount Kit # BDW20155 with this 12K Winch # BDW10043. We have a bunch of weld on hitches,...
view full answer... - Trailer Hitch With Drop for Ford Chassis With 34 Inch FrameWe have an option for you, though the hitch you mentioned will not fit your ambulance on a 1996 Ford F-350 cab and chassis. Instead, you need a universal weld-on hitch, and we have the exact one that will work: - Curt Class 5 Universal Weld-on Hitch with Brackets # C47CR This hitch is designed to fit frames between 18 inches and 44 inches, and gives a 9 inch drop from the frame of the vehicle so it will work great for you since you mentioned needing an 8 inch drop.
view full answer...
- Heavy Duty Hitch For 2013 Coachmen Leprechaun Class CI have a solution for you. I see a couple of options, you can go with the Class V Universal Weld-on Receiver Hitch and Brackets with 3" Drop # 15901. It is a weld-on hitch with a Gross Trailer Weight (GTW) of 15,000 pounds and a Tongue Weight (TW) of 1,500 pounds Or we have the Curt Class 5 Universal Weld-on Hitch w/ Brackets # C47CR. This is a weld-on hitch with a GTW of 16,000 pounds and TW of 1,600 pounds. You will also need the brackets with this one. We have the 7" Weld-On Bracket...
view full answer... - Can A Custom-Fit Front-Mounted Trailer Hitch Be Modified To Be Less Noticeable Hi Patrick, With custom-fit trailer hitches like the Draw-Tite # 65064 you were looking at there really isn't any modifications that you can make to the hitch to have it sit further in. If you went with a weld-on hitch you could play around with it a bit more to get it sitting where you want. You will have to do a bit of measuring at first to figure out the correct drop needed though. We offer the following drop lengths: Draw-Tite 7" Drop # 41990-07 16" Drop # 41990-16 Curt 3" Drop...
view full answer... - Front Mounted Trailer Hitch Options For A 2024 Jeep Wagoneer Hi Stephen, There isn't a custom-fit front hitch available but we do offer adjustable-fit weld-on trailer hitches that you can cut to fit your frame and weld in place. We offer a variety of drops so you'll want to do a bit of measuring on your Wagoneer to figure out the best drop to fit the receiver tube either through fascia or beneath it. Draw-Tite 7" Drop # 41990-07 16" Drop # 41990-16 Curt 3" Drop # 15901 9" Drop # C47CR 10.865" Drop # 15902 11-1/2" Drop # 15903 18" Drop # C99CR
view full answer... - Trailer Hitch and Wiring Needed for a 2022 Ford E-350 VanThank you for reaching out! It looks like the 2022 Ford E-350 doesn't have an exact fit trailer hitch so you'll need to install a universal hitch like the Curt Class 5 Universal Weld-on Hitch w/ Brackets # C47CR and then universal wiring like the 4-Way # 119178KIT or 7-Way # 22551. This isn't really ideal but it's the only way to get a hitch on your vans. Unfortunately the hitches designed for an F-350 frame won't work with an E-350 van frame so this is all going to be custom work that...
view full answer... - Front Mounted Trailer Hitch Receiver Options For A 2003 Nissan Frontier Hi Hank, It unfortunately looks like there aren't any custom-fit front mounted trailer hitch receivers for your 2003 Nissan Frontier so the next option would be an adjustable-fit weld on hitch. We offer a few different drops to help get the receiver tube under the fascia so you'll need to do some measuring from the frame to determine the drop needed. Draw-Tite 7" Drop # 41990-07 16" Drop # 41990-16 Curt 3" Drop # 15901 9" Drop # C47CR 10.865" Drop # 15902 11-1/2" Drop # 15903 18" Drop...
view full answer... - Option For Trailer Hitch For Holiday Rambler MotorhomeThere is possibly an option for a trailer hitch that fits your 2004 Holiday Rambler, and I say possibly because while a custom fit hitch is not available, there are universal weld-on hitches. This depends on the width of your frame from outside to outside, so if your frame measures up to 44 inches (from outside to outside), you can use any of the following. - 3" Drop: Curt Class 5 Universal Weld-on Hitch # 15901 - 9" Drop: Curt Class 5 Universal Weld-on Hitch # C47CR - 18" Drop: Curt...
view full answer... - Parts Needed to Tow 1999 Jeep Cherokee With School BusWe do have some hitch solutions for you, but they'll need to be welded in place in order to install them, as none of the universal fit hitches we offer can be bolted on. What you'll need to go with is a universal-fit hitch designed for a service body truck, and in order to choose the correct one, you'll need to measure the needed drop, which is the vertical distance between the underside of the frame member and the lowest point of the rear bumper. You'd then choose the hitch with a drop...
view full answer... - Front-Mounted Hitch Options For A 2021 Chevy Silverado 1500 3.0L Duramax Hi Kelly, There unfortunately are no custom-fit front mounted trailer hitches available for Diesel models of the 2021 Chevy Silverado 1500 so you would have to go with an adjustable-fit weld-on hitch and measure for the correct drop needed/check for any obstructions that could prevent fitment with the mounting brackets to the frame. We offer the following options: Draw-Tite 7" Drop # 41990-07 16" Drop # 41990-16 Curt 3" Drop # 15901 9" Drop # C47CR 10.865" Drop # 15902 11-1/2" Drop...
view full answer... - Trailer Hitch Option For Shuttle 2011 Chevy Express Shuttle BusFor a shuttle bus like your 2011 Chevy Express, you'll need a universal hitch that will be welded onto your frame. You will want to measure your frame though, as it will need to be no longer than 44 inches from outside to outside. So long as you have that, you can use one of the following, depending on how tall you need the brackets to be: - 3" Drop: Curt Class 5 Universal Weld-on Hitch # 15901 - 9" Drop: Curt Class 5 Universal Weld-on Hitch # C47CR
view full answer... - Hitch Option For 1996 Pace Arrow MotorhomeThere isn't a bolt-on option that will work so you'll have to use a weld-on hitch for your 1996 Pace Arrow motorhome. One that will fit the frame distance of your motorhome and has a 2" receiver (but is actually a Class V hitch), is from Curt, the Curt Class 5 Universal Weld-on Hitch w/ Brackets # C47CR. This is for frames from a minimum of 18" to a maximum of 44" which is exactly the range your frame falls in.
view full answer... - Hitch For 1993 Ford E-350 RV With 42 Inch FrameThanks for the frame dimensions, and while there are hitch options for your 1993 Ford E-350 RV, I checked with the hitch manufacturers and there are no custom fit options. So what that means is in order to add a hitch to your RV, you would need a universal weld-on hitch. There are three different options, with each of them being Class V hitches with a 2 inch receiver, and fit frames that are between 18 inches and 44 inches wide, so they will fit your '93 E-350's 42 inch frame. The difference...
view full answer... - Best Way To Use A Hitch Bike Rack On A TrailerI suggest getting a 2 inch hitch receiver for your trailer. A universal one like this # C47CR will work well. You just need to weld it into place. I don't recommend putting the Swagman Original # S64400 in anything other than a hitch receiver. Luckily the Swagman Original is rated to be put on any vehicle you may have with a class III hitch or higher so you're good to use it on the back of your 14 foot trailer!
view full answer... - Trailer Hitch Options For A 2001 Blue Bird TC2000 Bus Hey Mike, Since there isn't a custom fit hitch for your bus you'll need to go with an adjustable fit weld on hitch. We offer a variety of drop lengths, which I've listed below, to help get the receiver tube at the right height: Draw-Tite 7" Drop # 41990-07 16" Drop # 41990-16 Curt 3" Drop # 15901 9" Drop # C47CR 10.865" Drop # 15902 11-1/2" Drop # 15903 18" Drop # C99CR
view full answer... - Trailer Hitch receiver For A 2011 Ford Expedition EL Hey Brian, That is correct, manufacturers do not offer a bolt-on trailer hitch receiver for 2011 Ford Expedition models. You'll have to go with a weld-on hitch and would need to measure the distance between your frame down to clear the bumper so that you can choose the correct drop: Draw-Tite 7" Drop # 41990-07 16" Drop # 41990-16 Curt 3" Drop # 15901 9" Drop # C47CR 10.865" Drop # 15902 11-1/2" Drop # 15903 18" Drop # C99CR
view full answer... - Trailer Hitch Receiver Options For A 2005 Ford E-350 School Bus Hi Jacob, The Curt Trailer Hitch Receiver # 14053 lists that it's a fit for cutaway chassis if the bolt holes are 38-5/8 inches from frame to frame. This would mean that the holes in your frame have to be spaced 38-5/8" from center to center in order for the hitch to work. With your vehicle be a school bus and the dimensions that you stated you'll likely have to go with a weld-on adjustable fit trailer hitch receiver. You'll want to measure the distance down from the frame to clear...
view full answer... - Recommended Trailer Hitch Receiver For A 1999 Toyota Prado RHDHi Colin, Since there isn't a confirmed fitting custom-fit hitch for a 1999 Toyota Prado RHD the only option would be to install a weld-on adjustable-fit trailer hitch. We haven't had a Prado in to test it for a fit with a 4Runner trailer hitch unfortunately. We have a few different sizes depending on the drop you'll need to clear the rear fascia: Draw-Tite 7" Drop # 41990-07 16" Drop # 41990-16 Curt 3" Drop # 15901 9" Drop # C47CR 10.865" Drop # 15902 11-1/2" Drop # 15903 18" Drop...
view full answer... - Recommended Trailer Hitch For A Vehicle With A 32" Frame Width The Curt Trailer Hitch Receiver # C15323 has a 39" distance from center to center of the mounting holes so it's not going to be a good candidate for your application. Since you can weld the best option is going to be an adjustable-fit weld-on hitch. We have a few different options depending on the drop you'll need: 3" # 15901 7" # 41990-07 9" # C47CR 11" # 15903 16" # 41990-16 The crosstube of these trailer hitches can be cut down to size to fit your vehicle's frame width.
view full answer... - Trailer Hitch Receiver Fit on 1998 Chevy 3500 Cab & ChassisA stake body should be referring to a cab and chassis, and we do have a trailer hitch receiver that fits a 1998 Chevy 3500 cab and chassis. You just need to make sure that your frame measures 34 inches outside to outside, and if it does then the correct hitch is the Curt Trailer Hitch Receiver # C14082. If your '98 Chevy has a frame which is not 34 inches wide, you can still add a hitch, but it would need to be a universal weld-on application. The correct one would depend on the exact...
view full answer... - Trailer Hitch Options For A 1994 Chevy Lumina APV Van Hey Ken, Since there isn't a confirmed fitting custom-fit hitch for a 1994 Chevy Lumina APV Van the only option would be to install a weld-on adjustable-fit trailer hitch. We have a few different sizes depending on the drop you'll need to clear the rear fascia: Draw-Tite 7" Drop # 41990-07 16" Drop # 41990-16 Curt 3" Drop # 15901 9" Drop # C47CR 10.865" Drop # 15902 11-1/2" Drop # 15903 18" Drop # C99CR These will fit an 18" to 44" wide frame width and any excess can just be trimmed...
view full answer... - Front-Mounted Trailer Hitch For A 2013 Chevy Silverado Moving A 11,700lb GVWR Trailer Hey Devin, With how heavy the trailer is the custom-fit front-mounted trailer hitches wouldn't have enough capacity so you'd have to go with a weld-on adjustable fit trailer hitch. We offer a few different drop lengths that you can choose from to hopefully line the receiver tube up either in the slot above the bumper or below the bumper to avoid trimming it. Draw-Tite 7" Drop # 41990-07 16" Drop # 41990-16 Curt 3" Drop # 15901 9" Drop # C47CR 10.865" Drop # 15902 11-1/2" Drop # 15903 18"...
view full answer... - Trailer Hitch Option For 2017 Ram Promaster 3500 Cab & ChassisFor your 2017 Ram Promaster 3500 cab and chassis service body, you'll need a weld-on hitch. There are three options from Curt that will work with frames that measure up to 44 inches (from outside to outside), with the only difference being the drop they provide (the distance from the bottom of the frame to the top of the receiver - 3" Drop: Curt Class 5 Universal Weld-on Hitch # 15901 - 9" Drop: Curt Class 5 Universal Weld-on Hitch # C47CR - 18" Drop: Curt Class 5 Universal Weld-on Hitch...
view full answer...
Do you have a question about this Heavy Duty Receiver Hitch?
Info for this part was:
Edited by:
Lindsey S
Installed by:
Jeff D
Updated by:
Wilson B
Written by:
Kristina F
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.