See what our Experts say about this CURT Heavy Duty Receiver Hitch

• What Hitch do You Recommend for My 2012 GMC Savana Utility Van?
  Is the steel step bumper you have installed the factory bumper on your 2012 GMC Savana KUV Van?
  view full answer...
  
• Recommended Trailer Hitch For A Foreign Model 2020 Ford Ranger FX4
  Hi Drew, The Curt # C97JR you were looking at is designed to fit select model Jeep Grand Cherokee L's and would not be a fit for your 2020 Ford Ranger. All of the custom-fit hitches we currently offer are designed for US models so you'd have to go with an adjustable-fit weld-on trailer hitch instead. These will come with a drop so you'll want to measure from the frame down to make sure the receiver tube will clear the bumper. Draw-Tite 7" Drop # 41990-07 16" Drop # 41990-16 Curt 3"...
  view full answer...
• Recommended Class IV Hitch for a 1983 Ford Van
  Hey Greg! We have some universal hitches like the Curt item # C47CR that can be made to accommodate 38" wide frames but no I do not have a way of finding a class IV or V hitch with 38" mounting bolts. The hitches are organized by what vehicle they fit. They're not sorted by size. I saw you were looking at hitches for a 1983 Ford van. We do have a custom fit class IV hitch that has 38-1/4" and 38-3/4" mounting holes. It is the Curt item # 14053. I have linked a diagram below so you can...
  view full answer...
• Can A Blue Ox Baseplate And Curt Front-Mounted Trailer Hitch Both Be Installed On A 2022 Ram 1500
  Hey Mike, Both the Blue Ox Base Plate Kit # BLU99FR and Curt Front Mount Trailer Hitch Receiver # C87FR would be fighting for the same space on the frame rail where the tow hooks sit so they would not be compatible together. There isn't another custom-fit hitch but you could go with a weld-on adjustable-fit trailer hitch and work with a local fabricator shop to get it sitting right and welded to the frame rails. We offer a few different drop lengths that you can use as a rise or drop...
  view full answer...
• Front Mounted Trailer Hitch Receiver Options For A 2019 Nissan Titan Pro 4x
  Hi Kevin, There unfortunately isn't a custom-fit front trailer hitch receiver for your 2019 Nissan Titan Pro 4x so you'd have to go with a universal-fit weld-on trailer hitch like I have listed below. These will all come with a specific drop so you'll want to measure from the frame down to see what size drop you'll need in order to clear the front fascia. These will fit an 18" to 44" wide frame width and any excess can just be trimmed off of the crosstube. Draw-Tite 7" Drop # 41990-07 16"...
  view full answer...
• Trailer Hitch Options For A 2018 Thor Outlaw 37BG On A Ford F-53 Chassis
  Hey Steve, For a 2017 F-53 chassis we currently only have weld-on universal fit style trailer hitches available. Each of these would fit 18" to 44" wide trailer frames and would come with brackets that can give you a different drop depending on your needs. You'll want to measure down from the frame to determine where you want the receiver tube to come out to avoid hitting the fascia. We offer the following drop sizes: Draw-Tite 7" Drop # 41990-07 16" Drop # 41990-16 Curt 3" Drop # 15901 9"...
  view full answer...
• Will the Curt Hitch 15901 Fit a 2020 Forest River Georgetown 378XL on a F-53 Chassis?
  Yes, it will Tom so long as the bottom of your bumper is no more than 3" from the bottom of your RV's frame. The Class V Universal Weld-on Receiver Hitch and Brackets item # 15901 is a definitely going to be wide enough to connect to your Forest River Georgetown's frame. What you'll want to do is measure from the bottom of your frame to the bottom of your bumper. If it's more than 3" you'll want to use the Curt item # C47CR instead. This hitch has brackets with a 9" drop. How far below...
  view full answer...
• Recommended Hitch for a 2024 Mercedes-Benz Sprinter 4500
  Hey Pat. The Draw-Tite Hitch item # 75549 does not fit the 2024 Mercedes-Benz Sprinter 4500 and we do not have a custom fit hitch that does. It fits the 2016 - 2025 Sprinter 2500 and 3500 vans with a 144" and 170" wheelbase and the standard bumper. I don't know how or if you can make the item # 75549 hitch fit a model with a 30-3/8" frame. My only solution is to recommend a universal hitch like the Curt item # C47CR. This fits frames from 18-44" and has a 2" receiver. It is a weld-on hitch...
  view full answer...
• Receiver Hitch for 2007 Newmar Class A Motorhome on Spartan Chassis
  While we do not have a custom fit option for a 2007 Spartan Chassis we do have several options of universal fit. Please note the attached link to the filtered options and let me know what follow-on questions you have. You will need to make measurements to identify which available option fits best, measure from inside the frame beam to the inside of the other frame beam to get the frame width. If you have, for example, a width of 18-44" then I recommend the Curt Class 5 Universal Weld-on...
  view full answer...
• 2006 E-450 Super Duty Shuttle Bus Trailer Hitch Receiver
  For your 2006 Ford F-450 Shuttle Bus you are going to need to use a universal hitch. For this you will need to measure how wide your frame rails are apart on the rear of your bus. Then you will need to know how much drop from the frame rails to the bottom of the bumper is required for the hitch to fit. The Curt Class 5 Universal Weld-on Hitch # C47CR will fit frames that are 18"-44" wide and brackets have a 9" drop. The Curt Class 5 Universal Weld-on Hitch # C99CR will also fit frame...
  view full answer...
• Recommended Trailer Hitch for a Thomas Saf-T-Liner School Bus
  The best option to add a hitch to your 2006 Thomas Saf-T-Liner School Bus is going to be the Curt Class 5 Universal Weld-on Hitch w/ Brackets item # C97CR. This is a universal hitch that fits frames from 18" to 62" wide. This is our highest rated universal hitch and it has a 20,000 lbs towing capacity. The included brackets will drop of 9" from your bus's frame. There are no custom fit hitches for your Thomas Sf-T-Liner and this is going to need to be welded to your frame for the capacity...
  view full answer...
• Can A Hitch Extender Be Used With A Front Mount Trailer Hitch To Park A Travel Trailer
  Hi Don, Hitch extenders place a lot of stress on the hitch because you're leveraging the weight further out so using one typically drops the capacity by 50% when towing. You'd be doing it in a parking lot situation where you wouldn't really be traveling much just more so maneuvering around so realistically that shouldn't affect you but depending on how much weight you're leveraging there could be a breaking point, we just wouldn't be able to know exactly what that point is. The Curt...
  view full answer...
• Replacement Trailer Hitch Options for a 2008 Coachmen Cross Country 38' Motorhome
  The mounting brackets on the Curt Class 5 Universal Weld-on Hitch # C47CR do need to be in that upright position so while this hitch can technically fit with your motorhome chassis, you'll need to get creative on how to properly weld the brackets to the frame. For an alternative option with the brackets that are in the same orientation as your frame brackets I recommend the Multi-Fit Motorhome Trailer Hitch # 5350 which fits 24" - 46" wide frames and is rated for 5,000 lbs towing. If...
  view full answer...
  
• Trailer Hitch Receiver Options For A 2025 Ford E-350 Cutaway Van
  Hey Jim, I drew up a little diagram of the Blue Ox Trailer Hitch Receiver # BLU75UR's dimensions so you can see if this would be a fit. It's not listed as a fit for your E-series cutaway chassis but the F and E-series can some times be interchangeable. It is listed to fit the following models: 2017 - 2025 Ford F-250 Super Duty 2017 - 2025 Ford F-350 Super Duty 2017 - 2025 Ford F-450 Super Duty Pickup There isn't a custom-fit option confirmed to fit so if this doesn't your next option...
  view full answer...
• Hitch For 1993 Ford E-350 RV With 42 Inch Frame
  Thanks for the frame dimensions, and while there are hitch options for your 1993 Ford E-350 RV, I checked with the hitch manufacturers and there are no custom fit options. So what that means is in order to add a hitch to your RV, you would need a universal weld-on hitch. There are three different options, with each of them being Class V hitches with a 2 inch receiver, and fit frames that are between 18 inches and 44 inches wide, so they will fit your '93 E-350's 42 inch frame. The difference...
  view full answer...
• Solution for Class V Hitch on 2011 Fleetwood Expedition Motorhome
  For hitch fabrication we only offer the receiver tube like the # E-11 or # C49511. You would need to take this to a local fabricator and they would be able to fashion a hitch and brackets that will fit your 2011 Fleetwood Expedition Motorhome. The other option would be to use one of the universal Class V hitches we have listed for your motorhome. We have the Curt # C47CR with a 9" drop and the Curt # C99CR with an 18" drop. Both options have a 2" receiver. The # C37CR and # C87CR are...
  view full answer...
• Trailer Hitch and Wiring Needed for a 2022 Ford E-350 Van
  Thank you for reaching out! It looks like the 2022 Ford E-350 doesn't have an exact fit trailer hitch so you'll need to install a universal hitch like the Curt Class 5 Universal Weld-on Hitch w/ Brackets # C47CR and then universal wiring like the 4-Way # 119178KIT or 7-Way # 22551. This isn't really ideal but it's the only way to get a hitch on your vans. Unfortunately the hitches designed for an F-350 frame won't work with an E-350 van frame so this is all going to be custom work that...
  view full answer...
• Front-Mounted Trailer Hitch Options For A 2006 Ram 1500
  Hi Brad, Yes, the Draw-Tite # 65033 sits much lower to clear the air dam, while the Curt Front Mount Trailer Hitch Receiver # 31320 sits higher, requiring you to trim the air dam. These both have a 5,000lb capacity so you should definitely make sure your trailer is under that. If it isn't then you should go with an adjustable-fit weld-on hitch instead to ensure you have the capacity to handle the trailer. You can measure the frame width and measure down to where you have space for the...
  view full answer...
  
• Is There A Trailer Hitch Receiver Available For 2012 Ford E450 Van / Bus?
  I have a solution for you, but there are not any custom-fit trailer hitch receivers for your 2012 Ford E450 van / bus so you will want to go with a universal option. The Class V Universal Weld-on Receiver Hitch and Brackets is what I recommend for your E450. You will want to measure and verify how much drop you want; for 3" drop go with # 15901 or for 9" drop go with # C47CR. I attached a demonstration video for you.
  view full answer...
• Parts Needed For Installing Trailer Hitch Receiver & Wiring For Brake Controller On 2005 School Bus
  The Curt Class 5 Universal Weld-on Hitch w/ Brackets # C47CR will allow you to weld on a receiver to your 2005 Thomas school bus. This hitch has brackets which will give you a 9" drop from your frame. The hitch is designed to fit a frame width 18-44" wide. For the wiring you will want to start with the Upgraded Heavy Duty ModuLite Circuit Protected Vehicle Wiring Harness # C59496. This will connect to the tail lights on your bus and provide the lighting for your trailer. It will connect...
  view full answer...
• Availability Of Trailer Hitch For 2024 Ford Expedition
  Hello Corey, thanks for reaching out. I do have a potential solution for you, but there are no custom fit trailer hitches made for the 2024 Ford Expedition. The only way to add a hitch would be to take a universal hitch like the Curt # C47CR to a welder and have them fabricate something to fit.
  view full answer...
• Trailer Hitch Receiver Options For A 2024 Fiat 500e
  Hey Jack, There unfortunately isn't a custom-fit option available for the 2024 Fiat 500e yet so the only other option currently would be to go with an adjustable-fit weld-on trailer hitch. To pick out the right one you'll need to measure down from your frame to find how of a drop you'll need for the receiver tube to clear the rear fascia. We offer the following drop sizes: Draw-Tite 7" Drop # 41990-07 16" Drop # 41990-16 Curt 3" Drop # 15901 9" Drop # C47CR 10.865" Drop # 15902 11-1/2"...
  view full answer...
• Trailer Hitch Options For A 2019 Isuzu NPR With Rollback Flatbed
  Hi James, There isn't a custom-fit trailer hitch option available for your 2019 Isuzu NPR so you'll need to measure the distance between the inside of the frame rails and also the drop needed from the frame down to clear the rear bumper. We offer a variety of drops to accomplish this that I've listed out below: Draw-Tite 7" Drop # 41990-07 16" Drop # 41990-16 Curt 3" Drop # 15901 9" Drop # C47CR 10.865" Drop # 15902 11-1/2" Drop # 15903 18" Drop # C99CR These would all need to be welded...
  view full answer...
• Trailer Hitch Receiver Options For 1999 Ford E450 Ambulance
  The width of the mounting channel is 2-7/8 inches for the Draw-Tite Max-Frame Trailer Hitch Receiver # DT37GR. It's pretty unlikely this is going to fit, and for applications like yours, the best option is a universal hitch that you can weld on. So long as your frame is no longer than 44 inches wide from outside to outside, a universal hitch will work, you just need to measure how far down you need the receiver to be from the bottom of the frame (the drop). Once you know that, you can...
  view full answer...
  

Do you have a question about this Heavy Duty Receiver Hitch?