Class V Universal Weld-on Receiver Hitch and Brackets with 3" Drop
(89 reviews)
Price: $262.65
In Stock
Class V Universal Weld-on Receiver Hitch and Brackets with 3" Drop
Item # 15901
Retail:$415.95
Our Price: $262.65
You Save: $153.30
This item qualifies for Free Shipping
In Stock
Need help with installation?
Locate installers near me- All Info
- Reviews (89)
- Q & A (0)
- Photos
CURT Heavy Duty Receiver Hitch - 15901
- 2 Inch Hitch
- Weld-On
- 18 - 44 Inch Wide
- Class V
- CURT
- 3 Inch Drop
Features:
- Universal hitch designed for use on service body trucks and utility body trucks
- Heavy duty, universal side bracket design
- Adjustable side brackets slide along hitch body to match exactly the width of your vehicle frame before being welded in place
- Side brackets fit frames from 18" up to nearly 44"
- Side bracket height produces a drop of 3" from the vehicle frame
- Black powder coat finish resists rust and corrosion
- Strong, secure all-frame attachment
- Solid construction for maximum strength and safety
- Assembled in the USA
Specs:
- 44" Wide trailer hitch receiver
- 2" Square receiver opening
- 1/4" Thick brackets
- Side brackets must be welded onto hitch and vehicle frame
- Side brackets fit frames from a minimum of 18" to a maximum of 43.88"
- Bracket height produces a drop of 3" from the vehicle frame
- Rating: Class V
- Maximum gross trailer weight: 15,000 lbs
- Maximum tongue weight: 1,500 lbs
- Limited lifetime warranty
Warning: All welding surfaces must be cleaned to bare metal or weld will not be the required strength and may void the warranty.
15901 Class V Universal Weld-on Receiver Hitch and Brackets with 3" Drop
Installation Details
Tech Tip
Welding required
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- Wrong item was ordered
Customer Reviews
Class V Universal Weld-on Receiver Hitch and Brackets with 3" Drop - 15901
Average Customer Rating: 4.8 out of 5 stars (89 Customer Reviews)
by: Derrick 09/13/2023
Added (welded) to our diesel pusher Motorhome and have no issues and really no worries while towing whatever we feel we need while camping.
by: JohnnyFix09/24/2021
This hitch was exactly what was needed for my landscaping customer's small dump body truck. It replaced the original custom hitch with only minor modifications to accommodate the cargo body. I have done considerable work for this customer over many years. No issues reported with this job. All good!! Thanks to Curt and etrailer for great products and stellar service. —
by: Richard 08/23/2020
The hitch eeceiver I bought is perfect for my RV. What I was even more impressed with was the updates etrailer.com sent as my order processed and shipped. Each step of the way I was updated by employees who accompanied the update with their photos. Very personalized experience. Thank you etrailers.com!
by: Chris09/13/2022
Package arrived on time-there was a good deal of dust in the package but that doesn’t hurt anything-the hitch and pieces are heavy duty.
by: Ron Spreadborough06/01/2015
Curt Class V receiver received complete and as advertised. Now, to get it installed by welder/ installer on '03 Newmar Dutch Star.
by: Cody B.04/14/2016
Worked great for my custom application. Placed behind my custom bumper as a hidden hitch.
by: Jpfunk07/10/2020
Well made hitch, very adjustable, and easy to install. No problems towing my 30' cabin cruiser with my new-to-me Semi-tractor. Exactly what I was looking for.
by: Kevin 12/27/2019
Excellent product, just what I needed for a modified flatbed installation
by: Robert 09/21/2022
Solid and sturdy
by: Dana 08/29/2022
very fast service , and talked to a representative that pointed me to what i needed thanks
by: Jack 05/12/2021
The product was as described and worked fine.
by: David Barnes01/25/2012
Very high quality parts and as represented. No disappointment in this unit.
thanks
David Barnes
by: Jack 12/28/2020
Just what I needed
by: Gerry kk07/21/2016
Greatest price and exceeded expectations
by: Monica 01/05/2023
by: Dale 10/14/2021
by: Vladen03/11/2021
by: Michael 02/05/2021
by: EAVgirl07/14/2023
It’s beefy and solid. The mounting bracket square holes had to be cut in a smidge and he added two more support bars.. but all in all. My welder said it would tow 11-12 k. Not the 16k I was told. But hey. I’m okay with that. There was a shipping issue which forced me to reschedule a few things, that is the only reason I gave 4 stars. Otherwise I am supper happy with how it turned out.
by: David01/24/2024
It is very well built and the powder coating is very tough, took a good grinding to get it off for the welds. Good price as well. I used it for my 2006 Bounder 35E, not because it was a high rate hitch, as I did not need one, but this was the only one that would lower the hitch to a more normal height from the ground. The old hitch was so high a 10" deep was not enough to use a trailer parallel to the ground. Now I can hook up a lot easier and not worry about scraping. Looks good too.
by: James08/19/2023
Great quality product from Curt . Can be easy installation depending on the application.. mine more difficult because of aluminum alloy frame, so will have to do some reinforcing.
by: Jon12/09/2023
I put this on my 03 Freightliner Columbia. It does everything I want it to. It is bolted and welded.
I like it so much that a bought another one and put it on my old school bus. That one is just bolted on.
by: Paul10/10/2022
attached this hitch to my 1984 American General 5 ton military truck. Had to do some modification to air lines and drill a few holes but it is perfect for pulling civilian trailers with the M 813.
by: Gilles 04/19/2024
Fast shipping
25
89
Show More Reviews
See what our Experts say about this CURT Heavy Duty Receiver Hitch
- Class V Hitch With Drop For 34 Inch Frame Rails on Custom TruckWe definitely have some options that will work for you, though in regards to the specific hitches you asked about, the Curt Trailer Hitch Receiver # C15300 is 36 inches between the bolt holes, while the Curt Trailer Hitch Receiver # C15410 measures 34 inches between the bolt holes. So neither is going to fit 34 inch wide outside-to-outside frame rails, which makes sense as these are custom-fit hitches. What you can use instead is a universal weld-on hitch that doesn't require that specific...
view full answer... - Trailer Hitch for 2011 Mercedes-Benz Sprinter 3500 With 30-3/8 Inch Frame Width
I have a solution for you but there are no custom fit hitches for the narrow 30 3/8 inch frame 2011 Mercedes Benz Sprinter 3500 Dually models. They weren't as widely produced and some have a service body or step bumper which obstructs where a hitch would be mounted. If your Sprinter has a step bumper you will need to remove it. Once that's done, you'd want to measure the drop needed. The drop is the vertical measurement from the underside of the vehicle frame member and the lowest point...
view full answer... - Trailer Hitch Option For Shuttle 2011 Chevy Express Shuttle BusFor a shuttle bus like your 2011 Chevy Express, you'll need a universal hitch that will be welded onto your frame. You will want to measure your frame though, as it will need to be no longer than 44 inches from outside to outside. So long as you have that, you can use one of the following, depending on how tall you need the brackets to be: - 3" Drop: Curt Class 5 Universal Weld-on Hitch # 15901 - 9" Drop: Curt Class 5 Universal Weld-on Hitch # C47CR
view full answer... - Hitch for 2005 GMC C5500 Topkick with Tommy LiftThe # TLF1003-30 hitch you're asking about is designed for a 1999-2016 Ford F350, F450 or F550 chassis/cab and wouldn't fit your Topkick. For your truck, you'd need a multi fit hitch for heavy duty trucks as none of our vendors offer a custom made fit. In order to choose the correct one, you'll need to know the needed drop, height difference between the rear bumper and the underside of the Tommy Lift. If these heights are even, use the # 3371801050 from Buyer's Products. For a 3 inch...
view full answer... - Trailer Hitch Option For 2016 Winnebago on Mercedes ChassisThere are options for a trailer hitch for your 2016 Winnebago on a Mercedes chassis, the not the hitch you referenced because that hitch is only a fit for certain Ford trucks. There isn't a custom-fit option so you'll need a universal weld-on hitch. You'll need to measure the frame of your Sprinter from outside to outside, and if it is 44 inches or less what you can use is the Class V Universal Weld-on Receiver Hitch and Brackets with 3" Drop # 15901.
view full answer... - Class V Trailer Hitch Receiver Rated For 15,000LBS That Will Fit a Frame With Mounting Holes 31.75I recommend the Class V Universal Weld-on Receiver Hitch # 15901 as I cannot locate a custom fit receiver with those measurements. This receiver will fit frame widths from 18" to 43.88" and has the maximum trailer weight rating of 15,000lbs and maximum tongue weight of 1,500lbs.
view full answer... - Can a Rear Mount Trailer Hitch be Used on the Front of a 1996 Nissan 4x4 Pickup TruckI do have a solution for you but you will not be able to use a rear mount hitch on the front of a vehicle. Some trailer hitch manufacturers we carry do not give us the hitch dimensions because it is proprietary information. But I can tell you that the hitches you have listed are not going to fit at the front of your 1996 Nissan pickup. The frame is narrower at the front but beyond that it would require modification to the hitch and/or the vehicle that would void the hitch warranty and...
view full answer... - Recommended Trailer Hitch For A Foreign Model 2020 Ford Ranger FX4Hi Drew, The Curt # C97JR you were looking at is designed to fit select model Jeep Grand Cherokee L's and would not be a fit for your 2020 Ford Ranger. All of the custom-fit hitches we currently offer are designed for US models so you'd have to go with an adjustable-fit weld-on trailer hitch instead. These will come with a drop so you'll want to measure from the frame down to make sure the receiver tube will clear the bumper. Draw-Tite 7" Drop # 41990-07 16" Drop # 41990-16 Curt 3"...
view full answer... - High Capacity Trailer Hitch that Fits 2008 Tiffin Allegro Open Road 34TGAFor your 2008 Tiffin Allegro Open Road 34 TGA that could have been built on a Ford, Freightliner, or Workhorse chassis we have the Curt Class V hitch part # 15901 listed as a fit which has a 15k towing capacity. This is a weld on style hitch that is semi custom fit meaning it doesn't bolt right up. The brackets would get welded to the main crosstube at the correct width to fit your trailer frame and then the brackets
view full answer... - Hitch For 1993 Ford E-350 RV With 42 Inch FrameThanks for the frame dimensions, and while there are hitch options for your 1993 Ford E-350 RV, I checked with the hitch manufacturers and there are no custom fit options. So what that means is in order to add a hitch to your RV, you would need a universal weld-on hitch. There are three different options, with each of them being Class V hitches with a 2 inch receiver, and fit frames that are between 18 inches and 44 inches wide, so they will fit your '93 E-350's 42 inch frame. The difference...
view full answer... - Availability of a Trailer Hitch Receiver for a 1961 International C-120 Travelall SUVAlthough we don't have a custom fit trailer hitch for your 1961 International C-120 Travelall, doesn't mean it can't be done. I recommend having a certified welder weld a hitch receiver like such as part # 15901. It's a universal hitch usually designed for service or utility body trucks. But you can align the hitch body with the adjustable side brackets to match the width of your 1961 International C-120 Travelall. I included a link to all of the specialty trailer hitches we currently...
view full answer... - Hitch Recommendation for a 2022 Ram 5000 Cab/Chassis While we do have some great universal-fit options for your 2022 Ram 5500 4x4 cab/chassis, we do not carry any custom-fit options. With that being said, the best option is a weld-on hitch like the Class V Universal Weld-on Receiver Hitch and Brackets with 3" Drop # 15901 or the Curt Class 5 Universal Weld-on Hitch w/ Brackets - 2" Receiver # 15903. The # 15901 comes with a 3" drop if you need lowered height and comes with brackets that adjust for frames between 18" to 44" wide. The # 15901...
view full answer... - Recommended Trailer Hitch Receiver For A 1999 Toyota Prado RHDHi Colin, Since there isn't a confirmed fitting custom-fit hitch for a 1999 Toyota Prado RHD the only option would be to install a weld-on adjustable-fit trailer hitch. We haven't had a Prado in to test it for a fit with a 4Runner trailer hitch unfortunately. We have a few different sizes depending on the drop you'll need to clear the rear fascia: Draw-Tite 7" Drop # 41990-07 16" Drop # 41990-16 Curt 3" Drop # 15901 9" Drop # C47CR 10.865" Drop # 15902 11-1/2" Drop # 15903 18" Drop...
view full answer... - Front Mounted Trailer Hitch Options For A 2004 Lexus GX 470Hey Eric, There aren't any custom-fit front mounted trailer hitches available for a 2004 Lexus GX 470 so you would need to go with an adjustable-fit weld-on trailer hitch. To do this you'll need to measure down from the frame to the location where you'd like the receiver tube to sit to figure out your drop. I've listed out the drops we currently offer below: Draw-Tite 7" Drop # 41990-07 16" Drop # 41990-16 Curt 3" Drop # 15901 9" Drop # C47CR 10.865" Drop # 15902 11-1/2" Drop # 15903 18"...
view full answer... - Trailer Hitch Options For A 2019 Isuzu NPR With Rollback Flatbed Hi James, There isn't a custom-fit trailer hitch option available for your 2019 Isuzu NPR so you'll need to measure the distance between the inside of the frame rails and also the drop needed from the frame down to clear the rear bumper. We offer a variety of drops to accomplish this that I've listed out below: Draw-Tite 7" Drop # 41990-07 16" Drop # 41990-16 Curt 3" Drop # 15901 9" Drop # C47CR 10.865" Drop # 15902 11-1/2" Drop # 15903 18" Drop # C99CR These would all need to be welded...
view full answer... - Front Mount Hitch Receiver for a 2018 Chevy Express VanFor your application I recommend checking out a universal hitch receiver like the Class V Universal Weld-on Receiver Hitch and Brackets with 3" Drop # 15901 as there aren't any custom fit front hitches for your 2018 Chevy Express Van. Since this is universal you'll basically be comparing this hitch to the available room on your vehicle and making sure everything matches up on your end. I'm attaching a dimensional photo of this Curt hitch for you to reference and use for checking the fitment.
view full answer...
- Recommended Trailer Hitch for a 2003 Chevy Express 3500 CutawayHey Mike, the closest I was able to find is the Class V Universal Weld-on Receiver Hitch # 15901. This is a universal trailer hitch that will fit frames ranging from 18" to 44", has a 15K capacity, and has 3" drop brackets. The other option would be to use the Curt Class 5 Universal Weld-on Hitch w/ Brackets # C37CR which has a 9" drop.
view full answer... - Availability of a Trailer Hitch for a 1989 Chevrolet R3500 Cab and Chassis Truck with Dump BoxAccording to my technical contact at Draw-Tite your 1989 Chevrolet R3500 cab-and-chassis with dump box has no direct-fit bolt on hitches available. However, there may be an option in a universal-fit weld on Class V hitch. Curt offers a universal-fit weld-on Class V hitch with 2-inch receiver opening an 3-inches of drop, part # 15901. This hitch fits truck frame widths between 18-inches and 43.88 inches. Installation requires welding on the side brackets to the main tube and welding the...
view full answer... - Trailer Hitch Availability for 1967 International Travelall 1200B 4x4 3/4-Ton Panel TruckSince we do not show any hitch fits for your 1967 International Travelall 1200B 4x4 3/4-Ton Panel Truck, your options would be to have one custom-fabricated or to use a weld-on universal-fit Class V truck hitch such as the Curt # 15902 which offers over 10-inches of drop (to clear your spare tire). We also offer Curt hitches # 15901 and # 15903 which are both also weld-on universal-fit types. Instructions for all items are linked for your reference.
view full answer... - Class V Trailer Hitch for 2015 Forest River SR340 Diesel Pusher Motor HomeWe do not offer a custom-fit Class V hitch for your 2015 Forest River SR340 diesel pusher motor home but we do have universal-fit hitches that can work for you. Installation will just be a bit more involved than for a bolt-on hitch. For example, Curt offers their weld-on 2-inch Class V hitch # 15903 rated for up to 1500-lbs tongue weight and 15,000-lbs gross trailer weight. We also offer Curt hitch # 15902 for frames between 18-and 44-inches wide that offers about 10-inches of drop. Curt...
view full answer... - Trailer Hitch for 2009 Sterling Bullet Heavy Duty TruckI have a solution for you, however there are not any bolt-on style trailer hitches made specifically for your 2009 Sterling Bullet C and C 5500. Instead, you could use a trailer hitch like the Curt Class V Universal Weld-on Receiver Hitch and Brakcets # 15901. This hitch features a 3 inch drop, is adjustable up to 44 inches wide, and has a 2 inch square hitch receiver. Weld-on brackets for the hitch can slide from 18 inches to nearly 44 inches. The hitch has a gross tow weight of 12,000...
view full answer... - Motorhome Hitch Upgrade to Use with 472-Pound Motorcycle on the Ultra-Fab # UF48-979033As far as mounting your 472-pound motorcycle along with the 52-pound Ultra-Fab Dirt Bike Carrier # UF48-979033 on your hitch rated for 500-pound hitch, you should definitely upgrade the hitch. This is because it is extremely dangerous to exceed the rated weight capacity of your hitch. While we do have a great option for you, the only Class IV universal hitch we carry is specifically constructed to be used with service vehicles. That is the Buyers Products # 3371801053. For an option that...
view full answer... - Best Hitch for a 1953 Chevy 3100 TruckI checked with Curt and Reese and there are no custom options for obvious reasons. The only styles of hitches that can be made to fit an older truck like yours is a universal hitch for heavy-duty and commercial vehicles with frames up to 44" like item # 15901 that has a 15k capacity.
view full answer... - Recommended Trailer Hitch for RV with 2001 Ford F-53 ChassisI may have a solution for you, however we do not currently offer any custom-fit trailer hitches for the 2001 Ford F-53 Chassis on your motorhome. Our available selection of trailer hitches designed for RVs and motorhomes are all Class III hitches. In order to upgrade, I recommend looking at a Universal Weld-On Heavy Duty Hitch like the Curt # 15901. This is a Class V trailer hitch that can fit frames from 18 inches up to almost 44 inches using the adjustable side brackets. This will offer...
view full answer...
Do you have a question about this Heavy Duty Receiver Hitch?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Jeffrey L
Installed by:
Steven C
Updated by:
Wilson B
Updated by:
Kristina F
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.