Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Adjustable 2" receiver hitch is designed to be used on travel trailers and fifth wheels to provide a way to carry bike racks, cargo carriers, or other hitch-mounted accessories. Bolt-on or weld-on installation requires no drilling.
Features:
Specs:
Notes:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello, neighbors. I'm Steven here at etrailer.com. Today we're looking at this Stomberg Carlson Adjustable Accessory Hitch Receiver. Now folks, this is a universal hitch. It's designed to work and use on travel trailers and fifth wheels. It can be either bolted or welded on by a professional onto your trailer.
You can possibly weld it on yourself. Just note that it is only rated at a class two of 350 pounds if it is welded and installed by a professional welder only. Otherwise, it's only rated at a class one 200 pounds. Now the receiver opening is a standard two inch by two inch tube here. You get your safety chain attachments, all the hardware here needed and bracketry if you need 'em to mount to your specific needs.
Everything's a heavy duty steel that's been black powder coated. It's gonna resist rust, corrosion, and it's got a nice kind of reflective, glossy finish to it, which is pretty nice. It does install on various trailer frames. It'll work on either C channel or an I-beam frame. So if you're using C channel, it's gonna work on the horizontal wall.
Now, as I mentioned, you got from 49 1/2 inches all the way out to 76 1/2. So these side pieces here can extend out (metal grinds) all the way if you need 'em. And they got bolt holes here to mount it to your frame. You can either use it like this or if you need to invert it, you can invert it like that. So keep in mind, you got a lot of versatility with this hitch.
(metal clanks) And on the front you can kind of see over here you got a hole, and right here. What you'll do is once you get this set to the length that you need it, mark it, either do a center punch or a paint mark or something and then pull these back out, drill a hole through that, and on the backside of this guy, there's a welded nut and then you can put a bolt all the way through there for extra, you know, hold it from sliding and whatnot. Folks, this is not, I repeat, not designed to be used for towing. So please do not try to tow anything with this. This is just to add a connection point, if you will, to carry like a bike carrier to carry some bikes, maybe a cargo carrier, something like that. Again, the weight rating is a class one, 200 pounds or a class 2, 350 pounds only if it's been installed and welded on by a professional. Now I want to kind of show you some dimensions here real quick. This image will also be available on the product page. You can scroll down and find that in the ask the expert section of the page and you could also pause the video if you need to and write down any kind of dimensions you need. Keep in mind it is adjustable, so you got lots of variations that you could use if need be. Well folks, that's gonna wrap it up for our look at this Stromberg Carlson Adjustable Accessory Hitch. Again, 49 1/2 to 76 1/2 inch frames. I'm Steven. Thanks so much for watching. I hope this information's been helpful. Stay safe out there and have fun on your travels.
Customer Satisfaction Score:
95% were satisfied with this product
5% of customers were not satisfied
Ratings & Reviews
Ken
5/4/2026
Hitch is hanging in Strong! Not a single issue. Great Hitch!
Gwendolyn Y.
9/18/2025
Looks great, John! Where are you taking that dirt bike to?
Kate F.
3/26/2026
Glad we had the right fit so you can transport your toys a little easier Paul. What trip are you looking most forward to this camping season in your RV?
Mike L.
4/9/2026
The hitch is a universal-fit item, it's not RV-specific. Welding the hitch in place is also an option, if you'd care to go that route....
Manuel R.
11/23/2024
It is doing exactly what was intended. I had the unit welded so I didnt have to worry about it coming loose. Thank you.
Don K.
7/4/2025
Bolt on bumper is still performing well after a year and multiple trips. I have a reared on my 5th wheel and it has had to drag several times with no damage holding up well
Chase
6/20/2025
It is tough it can haul way more than what it is rated for i have put mine to the text more than once I am really pleased with it
Do you have a question about this RV and Camper Hitch?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Gwendolyn Y.
5/6/2025
It does look solid, Ken! What are you going to be mounting on it?