To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This hitch keeps your ride looking like it just rolled off the assembly line. The cross tube hides behind the bumper, and the 2" receiver detaches with no tools when you’re not using it. Pop it out, stow it away, and there’s no sign you ever had a hitch installed. When you need it, slide in your bike rack or cargo carrier and hit the road without messing up your car’s lines.
There’s no drilling or welding needed here. The hitch bolts on using existing connection points, keeping your vehicle’s crumple zones protected. You can latch the receiver in seconds—just push it into the stainless steel block until it snaps in place, then lock it down. When you’re done carrying gear, turn the handle to remove it and cover the opening with the included hitch plug to keep out dirt and debris.
You can trust this hitch to handle your gear. The sturdy center block design provides a solid mount for bike racks or cargo carriers, with a maximum tongue weight of 350 lbs. Stainless steel construction and a black powder coat finish fight off corrosion from road grime and weather. It meets SAE J684 safety regulations, so you know it’s built for strength and reliability every time you use it.
If you ever want to tow, this setup makes it easy to expand. Add the Stealth Hitches towing kit (391CONVB7 – sold separately) to get a ball mount with a 2" hitch ball and wiring harness rated for up to 3,500 lbs gross trailer weight. That same center block lets you swap between the rack receiver and ball mount whenever your adventures change direction.
Alternate Instructions
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
Ratings & Reviews
Fits perfectly with model 3 2022. The only thing I noticed is the right side of my crush bar had only 2 holes instead of 3 as in the installation manual. Other than that installation went smooth. Thanks etrailer for prompt delivery.
The stealth hitch is worth the money spent. Easily detaches when not in use and does not affect the profile of the car. The process of setting up the free install with etrailer makes it even better.
This thing is a super well constructed and designed unit. Install took be about 2-3hrs and instructions were very good, if you have moderate DIY skills definitely doable. The best part is how easy and secure removing the receiver is.
A year in and still works great. Easy to put in and take out. The hitch does ride low, and coming out of steep driveways and some speed humps the bottom of the hitch will scrape. I can avoid it most of the time, but just go slow on steep inclines and speed humps.
The only other issue I had was that the cover that holds the keyway protector did not come installed and I didn't see a way to secure it. It is currently on with friction, and hasn't fallen off, but that's the only issue that could have been better.
All in all, still awesome and easy and I appreciate the very solid engineering. Worth the money.
Received package three days after placing order! Put it on myself the same day. Had help from a friend; I have no experience working on cars and took about three hours to install. The instructions were pretty easy to follow, though I wish they had better pictures (angles). I got the rack only option, and step 14 of the instruction called to mount the chain hooks, I looked for the chain hooks for a good five minutes and thought they forgot to include it. Turn out the chain hooks only come with the tow package, silly me lol. The template for trimming the bottom panel is accurate, hopefully you have the newer model 3 and don't have to cut it (Dremel tool did a good job cutting it). The receiver and locking mechanism look a lot more solid than the EcoHitch version. Unlike the EcoHitch, there's no bolts to mess with when removing the receiver, so it's very easy to remove and install the receiver.
This was my 1st time installing and it took a few hours. The passenger side 25mm torx screw was hard to get off and on from the Tesla. The kit is perfect and fits my 2021 Tesla Model 3 with no cutting. I did buy the separate black and orange plastic tool set, it made the job easier. I did use painters blue tape to prevent scratches. I did trim the small Rubber cap so I could out the removable black cover back on underneath when I am not usine the hidden hitch. Note older Teslas do not have the removable cover, so minor trimming of that cover will be required.
This is my third etrailer hitch, as always this hitch for our Tesla Model 3 didn't disappoint... It's just for a bike rack but it's very very sturdy... I have to agree when they say the difficulty of install is 10/10... Hardest part was cutting out the the bumper weld and putting the facia back on with my wife helping... Don't be afraid to do it, just take your time, etrailer gives great videos and directions...
Installed it myself. 2-3 hours for anyone mechanical, with all the right tools on hand. The hitch fits well, seems well made and is sturdy. the materials provided as well as the install video were a great help.
This hitch is expensive. I picked this over the others for design and the ease of use despite the sticker shock.
I wish I knew the keys were inside the hitch itself. I spent a little too much time searching for it before by chance stumbling upon it. Hopefully it shows this in the instructions and I just missed it. The directions also do not specify this to my satisfaction, but you will have spare parts. The factory impact bar mounting brackets come off and are replaced with supplied brackets. I hope they are up to the task of the original factory design.
The shipment was later than estimated, but the communication from etrailer was good after delivery.
A compact and sturdy build. Very good instructions, particularly for the 2024 Model 3 Performance. If working alone, support the bumper cover on boxes or blocks when removing/installing. Unplugging the two wiring connections on the bumper can be tricky, so take your time. I modified the bumper beam with a grinder, but a drill will work fine. it's aluminum, so easy to cut. My only issue with the install is that the hitch sits a hair low, so that the rubber plug in the bottom of the locking mechanism hits the bottom inside of the bumper cover. But, that closeness doesn’t really interfere with hitch installation or the cover plate for the hitch opening when the hitch is not in use. My car is now ready for my bike rack, or hitch mounted luggage rack. I do not tow with this vehicle, although it is certainly capable.
Outstanding hitch. Install was straightforward and actually the easiest of the many E trailer hitch I’ve installed on vehicle vehicles.
I installed this hitch on my Tesla Model 3 to carry e-bikes (makes sense, EV + e-bike). The hitch is invisible until I add the receiver, which I do only when mounting the bike rack. This is the perfect solution for this application and car!
Well made kit with usable instructions for the Tesla Model 3. Tesla changes their assembly techniques frequently so the instructions may not be completely accurate, however, it is easy to see where you need to modify. Highly recommend using jack stands or ramps for easier access to the under tray. Also, use painters tape to protect the body panels due to removal and more importantly reinstalling the bumper. It took two of us just over 3 hours to complete.
The hitch seems well designed and doesn't affect the profile of the car when the receiver isn't installed. You can replace the hitch panel on newer model 3s and nobody would ever know it is there. Once the hitch receiver is installed it does stick out prominently from the body. Depending on your rack, this may be a great thing, or a slightly bad thing. My Yakima Dr. Tray sticks out quite a bit maybe impeding approach angles. I haven't had any issues yet, but does cross my mind while driving.
If you're carrying bikes on the Model 3, this seems like the best choice. I wanted to use suction cups on the glass, but both reviews and manufacturer recommends against it due to Tesla's glass crack issues. No guarantees it won't crack even when following updated suction cup locations. The Tesla roof rack is too cumbersome to mount and unmount and also has glass cracking issues. So, that leaves hitch racks and this seems to be the best solution.
Hitch was perfect and as described ready for install. Shipping was extremely quick after order placed as always with etrailer. Always great experience with you guys
This is a bit more than I expected - looking at all other Model3 hitches I was thinking I have to remove my crashbar, but this one had a very specific instruction on how to properly cut it to keep it on my car. The packaging is very well thought and the hitch itself is pretty decent.
etrailer’s exceptional service includes quick shipping and meticulous packaging with a step-by-step instruction manual. Attaching the stealth hitch differed from other videos; my bracket was welded to the steel beam, requiring an hour of chiseling and hammering. Thankfully, I had the right tools. The ground clearance is an issue with my 2019 Tesla Model 3 SR+ on 19-inch wheels. Pulling in/out at certain angles sometimes causes scraping on the bike rack hitch. I may need a different bike rack. Overall, give yourself ample time to go through each step carefully. It’s worth it. :)
I was very impressed with the design and quality of this product. The fit is perfect. It fits under the bumper support with very little space to spare but without touching the support. The welds are not overdone and very well done (per my kid, a professional certified welder). The stainless receiver block is extremely nice.
On step 12 read the "TIP" first. Don't forget to plug all the connectors back in. Put masking tape on the rear fender before reinstalling the bumper cover to prevent scratching the paint.
Gwendolyn Y.
4/24/2025
Hey, nicely done, Lantz! I see you already got your bike rack on and ready to go! When's the next bike ride?
I installed this hitch in about 3 hours, took my time to make sure everything was right. There’s nothing worse than completing a job then realizing you forgot a screw. The etrailer instructional video was perfect and made the job so much easier. Shipping was super fast !!! Ordered and received within 3 days !!! Best prices for most anything you order from them and customer support is on point. I’ve ordered several items from etrailer in the past and always get the absolute best price … oh yeah, they price match too !!!! Luv etrailer !!!
Leigh
4/12/2023
Receiver works perfect, solid quality product. Can’t comment on ease of removal because I always leave on my vehicle. I would buy again definitely.
Solid build quality! Very high quality which is good for my ebikes. it barely moves at all when driving. a must have addition for ebike owners. ONE problem tho, on the list of certified installers none of them would work on my car because it was a Tesla. so i spent weeks looking but finally found a small shop, so keep that in mine for tesla owners.
Great product! Well packed, shipped quickly, detailed instructions and high quality product. Well done.
This hitch really does the job! It holds my 2 e-bikes (without the batteries) with no problem and is secure. My brother-in-law was able to install it in about 2.5 hours with my encouragement! Perfectly hidden on my 2021 Model 3 until needed. Looking forward to exploring many trails...
The installation process went smooth, but they should include printer instructions for Tesla 3 Highland, not just prior years models.
This thing solid, and does not move when locked into place. I use it with a bike rack to carry two burrito powered mountain bikes (non e-bikes). Installation took me about 2 hours and 45min. That’s completely done and driving back to the auto store to return the torque wrench I borrowed. It may take a little longer or maybe quicker for some. I took my time taking the bumper fascia off. Modern car panels are held together by nothing more than plastic clips, and I didn’t want to break anything. Once that was off, the process picked up pace. When the hitch is removed, it looks like a regular model 3.
Fit perfectly and well engineered. Wish I ordered the complete towing kit with chain attachments and trailer lights. Better to do it all at one time because of installation. Thanks for a great product
The model 3 stealth hitch is amazing. I primarily use it to attach a bike rack and have had no issues with putting it on or taking it off when not in use. Love that I can keep my model 3 body lines when not needing the hitch itself. Highly recommend this product!
Kyle R.
8/19/2025
The stealth hitch continues to meet my needs one year later with no complaints! Still highly recommend!
Excellent product with clear instructions.
Everything arrived well packaged with all hardware and installation parts clearly labeled and packaged.
The hitch went on without any issues and is truly bolt-on. The install on my Tesla Model 3 was pretty involved but between the instructuons and i stall video it was an easy step by step process. I did it in my driveway without a lift. I do have a full set of mechanics tools so I had everything I needed to install and torque bolts.
Highly recommend this hitch. It’s a little more money than the others but the quality speaks for itself.
Kate F.
5/6/2026
That install looks great, thanks for sharing the photos Michael! You’re absolutely right too, those stealth hitch installs can take some time with all the trim and panels that have to come off and go back on, so it’s awesome to hear it went smoothly in your driveway. Glad everything was clearly labeled and the instructions and video helped along the way. What are you planning to use the hitch for on your Model 3?
Do you have a question about this Trailer Hitch?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Gwendolyn Y.
5/21/2025
Install looks great, Mikhail! Most of the time the hitch pretty much replaces the crash bar but it's always nice when you can still keep it for that added protection just in case. What are you plans for the hitch?