bing tracking image
  1. Trailer Hitch
  2. Draw-Tite
  3. Class II
  4. 1-1/4 Inch Hitch
  5. 3500 lbs GTW
  6. Concealed Cross Tube
THIS ITEM IS NOT A FIT FOR
2012 Volvo S60
Draw-Tite

Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"

Part Number: 36416
In Stock
$224.89
Retail:$345.16
You Save: $120.27
Trailer Hitch
Not Confirmed to Fit

2012 Volvo S60

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

This fully welded, corrosion-resistant vehicle trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Drawbar sold separately. Great Prices for the best trailer hitch from Draw-Tite. Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4" part number 36416 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (224)
  • Q & A (0)
  • Photos

Draw-Tite Trailer Hitch - 36416

  • Class II
  • 1-1/4 Inch Hitch
  • 3500 lbs GTW
  • Concealed Cross Tube
  • 300 lbs TW
  • Draw-Tite
  • Custom Fit Hitch

This fully welded, corrosion-resistant vehicle trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Drawbar sold separately.


Features:

  • Custom-fit trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicle
  • Computer-aided, fully welded steel construction ensures strength and durability
  • Tested Tough - safety and reliability criteria exceed industry standards
  • Bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at etrailer.com
  • Black powder coat finish covers e-coat base for superior rust protection
  • Sturdy, square-tube design
  • Drawbar and pin and clip sold separately


Specs:

  • Receiver opening: 1-1/4" x 1-1/4"
  • Rating: Class II
    • Maximum gross trailer weight: 3,500 lbs
    • Maximum tongue weight: 300 lbs
  • Limited lifetime warranty


Draw-Tite Tested Tough

Draw-Tite Tested Tough

Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.



Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.


In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.


etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.



36416 Draw-Tite Class 2 Trailer Hitch Receiver

90152 Hidden Hitch Class 2 Trailer Hitch Receiver

Installation Details 36416 Installation instructions

This Product Fits The Following Vehicles



California residents: click here


Customer Satisfaction Score:

Ratings & Reviews

4.7

226 reviews
This fully welded, corrosion-resistant vehicle trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Drawbar sold separately.

by:

Although I have not pulled with it yet, I installed my hitch last night. It was one of the easiest I have installed and took me about 40 minutes. Etrailer sent my hitch in a very timely manner and the Hidden hitch is completely concealed on the car except for the receiver portion. I am very pleased with the product and would recommend etrailer and the hitch to a friend.



by:

I ordered a hidden hitch on a Friday afternoon for my 2011 Toyota Camry XLE so I could carry a bicycle rack on my car. I received the hitch Wednesday at noon and had it installed in 45 minutes. Great hitch and excellent service from etrailer at a good price. I am pleased with the advice and efficient service I received. I will definitely buy from them again and I do tell my friends about them.



by:
2011 Toyota Camry

Great product would recommend to others



by:

recommended



by:

Great price and super quick delivery. Thanks.



by:

It's unbelievable how quickly the hitch was sent and received!



by:
2008 Toyota Camry

As expected, installed in less then an hour....



by:

Great fit and easy to install. The light kit works good too.



by:
2009 Toyota Camry

Great quality, great service, rapid processing and delivery.



by:

Very easy install. Well pleased with product and fast delivery.



by:

I ordered the hitch and wiring kit with 3-5 day delivery. I ordered it on Monday, it was waiting for me when I returned home from work on Wednesday evening. 2 day service. Extraordinary!



by:
2008 Toyota Camry

Installed on 2008 Camry. Did not have to lower exhaust. The install was very simple. Everything matched up and the Bolt on was dead nuts on.



by:

It took me about one hour to install the new hitch. the video was very good. The hitch looks much stronger than the car would ever be. Thank you. Deb.P.S. with my smaller hands i did not have to mess with the exhaust at all.



by:
2010 Toyota Camry

Part installed in about 2 hours but I had atleast 45 minutes of interruptions. The video was very helpful as I installed it. Would up with two unused bolts which I believe would have been used had I had the Hybrid. I also installed it by myself which took alittle work but I did it!



by:
Toyota Camry

I purchased this to tow my new teardrop camper with my Camry. Works great!!!

Corey B. profile picture

Corey B.

7/29/2015

How much does your tear weigh and how does the car handle towing it?

Greg S. profile picture

Greg S.

7/29/2015

Hey Corey, the dry weight is 750 lbs, by the time I load the with gear and ice chests, etc. its probably closer to 1000. Got stuck in the mud a couple of times, but I have pulled it uphill at 70 mph



by:

Just installed the hitch this past weekend and it was easy. Thank you for such great customer service and fast delivery.



by:

The box had been torn open during shipping and some pieces were missing but etrailer is working with me to insure the parts are replaced. Really appreciate good business partners!!!



by:
2009 Toyota Camry

I got the hitch very fast and it was exactly what I ordered. The install was super easy. (20 minutes) I will for sure order from
etrailer again!



by:
2011 Toyota Camry

I would have like more clear instruction on the wiring . However the hitch was a breeze. The video was a big help. It was also nice to find two extra bolts that I ended up needing. Very good experience



by:

Very satisfied with this product. It hides well under the bumper, about 80%. It took about 1 1/2 hour to install with one person. It would have been helpful to know that the two grommets that need to be removed are under the bumper. Also, with a good socket wrench, I did not have to lower the exhaust.



by:

This has been a great experience. I appreciated getting the status emails on when it shipped, and when it would arrive. The hitch fit with no problems. The hardest part turned out to be lowering the exhaust (couldn't get the rubber over the metal arm).



by:

I received the best prices and free shipping. My package arrived in 3 days, excellent service and products! I would definitely buy from etrailer again!



by:

Good price, easy installation, and took less than an hour. I recommend this hitch for bike rack purpose.



by:
Toyota Camry

The Hitch went on our Toyota Camry without any problems. Hitch was shipped the next day and shipping was free. Would highly recommend etrailer for future purchases.



by:
2009 Toyota Camry

i have an 2009 camry xle 4 cyl the hitch fit perfect and took maybe a half hour to put in, on this car the exhaust does not need to be dropped the hitch slides right up over it and bolts in with suplied bolts


25
226
Show More Reviews

See what our Experts say about this Draw-Tite Trailer Hitch

  • 1-1/4" to 2" Hitch Adapter For Bike Rack On A 2011 Toyota Camry With The Draw-Tite 36416 Hitch
    Hello Richard. We do have an adapter, the Brophy Hitch Adapter # HT5R which may work very well for you. This will go in to the 1-1/4" receiver on your Camry and give you a 2" receiver with 5" of rise. It is very important to note that when using this kind of adapter, the weight capacity of your hitch will be reduced by 50%. This means that your Draw-Tite # 36416 hitch will only be able to carry 150 lbs of tongue weight. This is including the weight of the adapter (8 lbs) plus the weight...
    view full answer...
  • Recommended Trailer Hitch For 2008 Toyota Camry SE V6
    Yes, we do have a hitch that will fit your 2008 Toyota Camry SE V6, but the item you selected, Curt Trailer Hitch, part # 12343, will not fit the SE model of the Camry. I would recommend the Draw-Tite Trailer Hitch Receiver, part # 36416, which is a Class II 1-1/4 Inch Hitch. To complete your towing setup you may be interested in the following: Draw-Tite Ball Mount, part # 36071 1-7/8 Inch Hitch Ball, part # 19256 2 Inch Hitch Ball, part # 19258 Pin and Clip, part # PC2 T-One Vehicle Wiring...
    view full answer...
    Image 1 for
  • Recommended Hitch For A 2011 Toyota Camry LE V6 With Dual Exhaust
    Hey Richard, for your 2011 Toyota Camry LE V6 with the dual exhaust, I actually recommend the Draw-Tite Hitch # 36416. This hitch was designed with the dual exhaust models in mind, and we have had many customers report back to us that it will fit the SE and LE dual exhaust models. So, the dual exhaust is not an exclusion. I have included a few pictures below with examples.
    view full answer...
  • Is Trimming of Fascia Needed to Install Trailer Hitch in 2007 Lexus ES350?
    I took a look at the installation instructions for both the Curt # C12343 hitch and the Draw-Tite # 36416 hitch to see if any fascia would need to be trimmed, and the Curt mentions that it may require fascia trimming. However, the Draw-Tite # 36416 will not, as you can see in the installation video I've linked showing the Draw-Tite being installed on a 2008 ES 350, which will be the same as on your '07 model.
    view full answer...
    Image 1 for
  • Can I Carry Two Heavy Electric Bikes on a 2011 Lexus ES350?
    For your 2011 Lexus ES 350, the only available hitches are Class II 1-1/4 hitch receivers. Technology has advanced where 2" hitches are being designed for newer models, but for your vehicle, a Class II is as good as it gets. The only solution here would be to use a hitch adapter # 80303 to turn your 1-1/4" into a 2" hitch. I would be cautious though, since this method halves your hitch capacity. Instead of 300lbs tongue weight, you will have 150 lbs tongue weight capacity. Rad Electric...
    view full answer...
  • Hitch Recommendation for a 2012 Toyota Camry
    The recommended hitch for your 2012 Toyota Camry is the Draw-Tite Trailer Hitch # 36540. I attached installation instructions for this product for you to check out as well. The Draw-Tite Hitch # 36416 that you referenced is not confirmed to fit on your vehicle so I cannot safely recommend it for you. To complete your towing setup you may be interested in purchasing the following: Draw bar part # 36071 Tow Ready Custom Fit Vehicle Wiring # 118405 (instructions attached) Hitch Ball with...
    view full answer...
  • E-Bike Rack Recommendation for a 2010 Toyota Camry
    For your 2010 Toyota Camry there are Class II hitches available for it like the part # 36416 so your best option will be the Thule Easy Fold you referenced part # TH903202 . This rack fits 1-1/4 inch Class II hitches and has a ramp to make loading the bikes very easy. I attached a review video for more info as well.
    view full answer...
  • Towing Capacity and Trailer Hitch Recommendation for 2009 Lexus ES 350
    Based on my research, the 2009 Lexus ES 350 has a towing capacity of 1,000 pounds. I was able to find this information in section 2-5 of the vehicle's online owner's manual. I recommend checking your owner's manual to confirm this information. The trailer hitch I recommend for your 2009 Lexus ES 350 is the Curt Class II Receiver Hitch # C12343. This hitch will not require any drilling for installation. The Draw-Tite # 36416 will require drilling into the trunk pan of your ES 350. Both...
    view full answer...
  • Can Thule Hitching Post Pro Fit on 2011 Toyota Camry
    Yes, the Thule Hitching Post Pro # TH934XTR is compatible with your 2011 Toyota Camry. I recommend using the Draw-Tite # 36416 because it features a hidden crosstube for a cleaner look (see attached). Since this is a Class II trailer hitch you can actually utilize the 4 bike positions of the bike rack. I have attached an installation video of the trailer hitch on an '11 Camry as well as a video of this bike rack on an '11 Camry for you to reference. You may also be interested in the Softride...
    view full answer...
    Image 1 for
  • Availability of 2-Inch Hitch for 2011 Toyota Camry Non-Hybrid SE
    We offer one hitch for your 2011 Toyota Camry Non-Hybrid SE, part # 36416 from Draw-Tite. This is a Class II hitch with a 1-1/4-inch receiver opening. No 2-inch hitches are offered for your 2011 Camry. This is because hitch makers base their hitch sizes and weight capacities on the structural strength of the vehicle's frame, where the hitch mounts. In the case of your 2011 Camry the frame structure is strong enough to handle the load of a Class II hitch, but not the load typical of a 2-inch...
    view full answer...
  • Hitch for 2013 Toyota Camry w/ Dual Exhaust
    For a 2013 Camry, you'd want to use the Draw-Tite Class II, part # 36540. This hitch will fit a vehicle with a dual exhaust. The # 36416 hitch you referred to is a fit for the 2007-2011 Camry, so it won't fit your 2013 model.
    view full answer...
    Image 1 for
  • Determining Tongue Weight Capacity of 2007 Toyota Camry
    The tongue weight capacity, or maximum downward force that can be safely applied to a hitch is typically 10 percent of the towing capacity of the vehicle. The combined weight of your chair plus the lift comes to 275 lbs, which is within the 300 lb tongue weight capacity of the hitch itself, but if the tongue weight capacity of your vehicle is less, you will need to abide by the lower rating. The hitch can handle the tongue weight, but you will need to determine if the vehicle itself can....
    view full answer...
  • Removal of Black Plastic Covering on Underside of 2011 Toyota Camry to Install Hitch
    I believe you are speaking of the plastic cover shown in the video I have linked to. Before the hitch installation, the cover is removed and is not re installed after the hitch is in place. Once the hitch is installed, the plastic cover will no longer fit on the Camry. Because the hitch needs to be in direct metal to metal contact with the underside of the vehicle once it is installed, the hitch cannot be installed over the cover. To view the video I mentioned and to see the install instructions,...
    view full answer...
  • Will Draw-Tite Hitch Fit with Dual Exhaust on 2007 Toyota Camry
    From what I'm seeing the dual exhaust on your 2007 Toyota Camry 3.5L V6 is symmetrical which means you'll have no issues with clearance when installing the Draw-Tite Trailer Hitch Receiver # 36416. We actually had a customer install this same hitch on a 2011 Camry with the dual exhaust and they sent a photo in that I'm linking for you to check out.
    view full answer...
    Image 1 for
  • 2011 Toyota Camry SE Trailer Hitch Recommendation
    We have the Draw Tite hitch part # 36416 which fits your 2011 Toyota Camry SE model and would be a great option for doing some light towing. For trailer wiring you'd want the Tekonsha kit part # 118482 which is a confirmed fit as well. For a ball mount you'd then want the part # 36071 and for hitch balls # 19258 for a 2 inch ball and part # 19256 for 1-7/8 inch ball.
    view full answer...
  • Which Draw-Tite Class II Trailer Hitch Will Fit On a 2007 Toyota Camry SE V6
    Yes, the Draw-Tite Trailer Hitch, # 36416, will fit your 2007 Toyota Camry SE V6. Installation of this hitch requires drilling and temporary lowering of the exhaust. But if you have the necessary tools and a helping set of hands, you should be able to install the hitch yourself. I have included a link to the installation instructions and a link to a video showing a typical installation for you to view. If you are planning to do some towing, the recommended ball mount is # 36071 and you...
    view full answer...
  • Can Draw-Tite # 36416 or Hidden Hitch # 90152 on 2008 Toyota Camry LE Handle 4 x 8 ATV Trailer
    Although the Draw-Tite, # 36416, and Hidden Hitch, # 90152 (no longer available), trailer hitch receivers have a 300 lb tongue weight capacity and a 3500 lb towing capacity which would be sufficient for a trailer carrying 750 lbs, you are going to be limited by the capacity of your 2008 Toyota Camry LE. Since the Camry is designed primary as a passenger carrying vehicle, Toyota doesn't provide a specific towing capacity. In this case you'll just need to make sure that the load of the...
    view full answer...
  • Compatability of Hitches with 2009 Toyota Camry LE
    The hitches available for the 2009 Toyota Camry will fit all Camry models with some exceptions for the SE model. 2 of the 4 available hitches will fit SE models, 2 will not. If there we exceptions for the LE they would be listed. All four of the hitches we have available for the 2009 Toyota Camry will fit your LE model. I have included a link to all the hitches available for your Camry LE.
    view full answer...
  • Trailer For Mobility Scooter Hauled by 2011 Toyota Camry
    You are correct that your 2011 Toyota Camry will have a hitch with a 1-1/4" receiver such as the Class II Draw-Tite # 36416, as that is the only size hitch made for this car. Since you are looking to pull a small trailer with this car you will need wiring, the T-One Vehicle Wiring Harness # 118482, to power your trailer lights. This hitch also requires Drawbar for 1-1/4" Hitch # 36071 and 1-7/8" Hitch Ball # 19256. The reason you want that size hitch ball is because the best option we...
    view full answer...
  • Trailer Hitch Recommendation for a 2007 Toyota Camry SE
    There is only one trailer hitch that fits your 2007 Toyota Camry SE and it comes from Draw-Tite: Draw-Tite Class II Trailer Hitch Receiver # 36416 This hitch has a 1-1/4" receiver but it's rated as a Class II so you get the 300 lb tongue weight and 3,500 lb towing capacities - just be sure you don't exceed the weight ratings of your Camry. If you plan on doing some towing then you'll want to pick up the following parts as well: T-One Vehicle Wiring Harness - # 118405 Mounting Brackets...
    view full answer...
  • Trailer Hitch Recommendation for a 2010 Toyota Camry SE with Dual Exhaust
    The Draw-Tite trailer hitch # 36416, can accommodate a 2010 Toyota Camry with dual exhaust. Take a look at the picture I have included. You can see that the symmetrical design of the hitch leaves enough room for the exhaust on both sides of the vehicle. I have also linked instructions and a video for you. If you plan on doing some towing the correct ball mount is # 36071 and you can use pin and clip # PC2. For a ball use # 19256 for a 1-7/8 inch diameter or # 19258 for a 2 inch diameter....
    view full answer...
    Image 1 for
  • Why is the Support Bracket on the 2011 Toyota Camry SE Not Reinstalled with Draw-Tite Class II Hitch
    The drivers side bracket is not reinstalled with the Draw-Tite Class II Trailer Hitch, # 36416, because the bracket will not fit once the trailer hitch is in position. I spoke with my contact at Draw-Tite and he says once the hitch is installed, the end plate and vehicle frame do not lose support. He said the trailer hitch ties into both end plates and the trunk pan so the support bracket is not needed. If you would like a trailer hitch that will mount to the end plate and the vehicle...
    view full answer...
  • Trailer Hitch Recommendation for 2008 Toyota Camry with Dual Exhaust
    For your 2008 Toyota Camry with dual exhaust we have the Draw Tite hitch part # 36416 which is a confirmed fit and would work well. We've had several customers come back with dual exhaust vehicles and state that this hitch was a fit. I attached an install video for you to check out as well.
    view full answer...
  • Recommend a Trailer Hitch To Carry Bike Rack on My 2011 Toyota Camry Hybrid
    The CURT Trailer Hitch, # 12343, will fit a 2011 Toyota Camry Hybrid. The CURT Hitch # 12343 is a Class II 1-1/4 inch receiver and includes a drawbar, pin and clip. The strap in question is the CURT Bike Rack Strap with Cambuckle, # 18050. CURT warranty requires, all non-trailer loads including such things as bike racks and cargo carriers, use a support strap. To maintain the warranty on the hitch, the strap will need to be used. Since you will only be using the hitch for a bike rack,...
    view full answer...


< Previous
123. . .4



Do you have a question about this Trailer Hitch?


Info for this part was:

Employee Joe V
Test Fit:
Joe V
Employee Shane T
Test Fit:
Shane T
Employee Mike L
Expert Research:
Mike L
Employee Robert G
Expert Research:
Robert G
Employee Patrick B
Expert Research:
Patrick B
Employee Michael H
Expert Research:
Michael H
Employee Jeff D
Expert Research:
Jeff D
Employee Reno H
Expert Research:
Reno H
Employee Jameson C
Expert Research:
Jameson C
Employee John H
Expert Research:
John H
Employee Adam R
Expert Research:
Adam R
Employee Zack K
Video Edited:
Zack K
Employee Jacob T
Video Edited:
Jacob T
Employee Mike H
Video Edited:
Mike H
Employee Chris R
Video Edited:
Chris R
Employee Andrew K
Video by:
Andrew K
Employee Alan C
Video by:
Alan C
Employee Lindsey S
Written by:
Lindsey S
Employee Laura H
Updated by:
Laura H
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C
Employee Amanda M
Updated by:
Amanda M
Employee Jenny M
Updated by:
Jenny M
Employee Isabelle B
Updated by:
Isabelle B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924
<