bing tracking image
  1. Trailer Hitch
  2. CURT
  3. 2 Inch Hitch
  4. Class III
  5. 5000 lbs GTW
  6. Concealed Cross Tube
THIS ITEM IS NOT A FIT FOR
2024 Dodge Hornet
etrailer Installation
We'll connect you with nearby partnered installers who know this exact setup.
CURT

Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"

Part Number: C13427
In Stock
$254.96
Retail:$406.95
You Save: $151.99
Trailer Hitch
Not Confirmed to Fit

2024 Dodge Hornet

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
By submitting this form, you understand and agree to our Terms of Sale, Website Terms of Use and Privacy Policy.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

etrailer Installation
We'll connect you with nearby partnered installers who know this exact setup.
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant. Great Prices for the best trailer hitch from CURT. Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" part number C13427 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (542)
  • Q & A (0)
  • Photos

CURT Trailer Hitch - C13427

Highlights

  • Custom Fit for Your Vehicle: Mounts to existing attachment points
  • Tows up to 5,000 lbs (GTW): Handles small campers, boats, and utility trailers with ease
  • Holds up to 750 lbs (TW): Supports bike racks, cargo carriers, and Class III accessories
  • Bolt-On Installation: Mounts directly to the frame using factory holes—no welding required
  • Concealed Cross Tube: Keeps a clean look with only the 2" receiver visible beneath the bumper
  • Corrosion-Resistant Finish: Gloss black powder coat over base coat protects against rust and wear
Made in USA

Features to know about

Get More Out of Your Ride: Class III Strength with a 2" Receiver

This hitch turns your vehicle into a workhorse for everyday towing and weekend trips. With a 5,000-lb maximum gross trailer weight and 750-lb tongue weight, it’s ready for light to moderate towing or hitch-mounted cargo and bike racks. When used with a weight distribution system, capacity increases to 6,000 lbs GTW and 750 lbs tongue weight. The standard 2" x 2" receiver fits most common accessories, so you can easily swap between racks, mounts, and carriers without extra adapters.

Built to Last: Fully Welded Steel with Dual-Layer Finish

The hitch is made from fully welded steel for solid strength and long-term durability. A gloss black powder coat sits on top of a protective base layer to resist rust and corrosion, even through tough weather. The round-tube design gives it a clean, finished look once installed. It’s the kind of build quality that holds up through years of towing, hauling, and everyday use.

DIY-Friendly Install: Bolt-On Design with Included Hardware

No need for welding or drilling—this hitch bolts directly to the frame using the included hardware kit. The mounting holes line up for a precise fit that saves time during installation. It’s designed so most folks can install it in the driveway with basic tools. Once it’s torqued down, you’re ready to tow knowing the setup is solidly mounted.

Protected for the Long Haul: Backed by Lifetime Technical Support

Every hitch comes with detailed installation instructions and carries a limited lifetime warranty. You also get lifetime technical support from experts who install and use these hitches every day. That means help is available if you ever have questions about towing setups or accessories down the road.

Specs

Receiver Opening

  • Receiver opening: 2" x 2"

Class Rating

  • Rating: Class III

Weight Capacity

  • Maximum gross trailer weight (GTW): 5,000 lbs
  • Maximum GTW when used with weight distribution: 6,000 lbs
  • Maximum tongue weight (TW): 750 lbs
  • Maximum TW when used with weight distribution: 750 lbs

Warranty

  • Limited lifetime warranty

13427 Curt Class 3 Trailer Hitch Receiver

Installation Details C13427 Installation instructions

This Product Fits The Following Vehicles




Customer Satisfaction Score:

Ratings & Reviews

4.9

542 reviews
5 Stars
(502)
4 Stars
(33)
3 Stars
(4)
2 Stars
(1)
1 Star
(2)
Review Sort Icon
by:
2020 Hyundai Palisade
Solid hitch receiver; it served us very well for its first long trip so far. My only complaint — and reason for knocking 1 star off the top rating — is that the heads of the long bolts on the drivers side were VERY difficult to access with tools to get them torqued properly. Inserting them in the first place also required more elbow grease than I had hoped. The etrailer video made the whole installation process look deceptively easy, but it took me 3 hours by myself with a set of ramps in the garage.
by:
Service spectacular, shipping tracking best I’ve encountered, installation was simple thanks to the instructional videos!
by:
I installed the hitch and wiring harness with no help in about an hour.
Brooke M. profile picture
Etrailer Expert

Brooke M.

7/14/2025

Boom! Way to get 'er done, Kenny :) What do you tow?

by:
LOVE IT. The YT video was the reason I purchased this brand. My past Pallisade the installer cut part of my bumper away and I hated how it looked. This hitch didn’t destroy my bumper and it looks amazing.
Brooke M. profile picture
Etrailer Expert

Brooke M.

5/2/2025

Definitely, Lisa! It's a smooth seamless look. :)

by:
2024 Hyundai Palisade
Hitch fit a 2024 Palisade Calligraphy perfectly. Very low profile, hoping my folding bike rack will fit. Takes some elbow grease at times and minor plastic cuts as described in the install video. This is a very doable installation for most people, assuming you have the tools you'll need, which isn't much. Some of the horizontal bolts are tough to torque due to the location and you definitely need ratchet extensions. Etrailer's install video couldn't make this install easier!
Gwendolyn Y. profile picture
Etrailer Expert

Gwendolyn Y.

2/17/2025

Hey Jon. Install looks great! What are you going to use the hitch for?

Jon profile picture

Jon

2/17/2025

@GwendolynY we'll mostly use it for a bike rack, and occasionally pulling a trailer for hauling building material. I also forgot to mention in my original review how FAST your shipping was! We had the hitch in less than 2 days after ordering.
by:
2020 Hyundai Palisade
I was going to purchase, and have installed, a receiver hitch locally for my 2020 Hyundai Palisade but could not find a shop that could do it in time for a weekend trip. So, I decided I would purchase this unit from etrailer.com and do the installation myself. I received the unit within a few days which was great. I watched the installation video ahead of time to familiarize myself with the installation process.

I must say that it was super easy, and the directions were spot on. The entire install took me less than an hour. It would be helpful to have two people when it comes time to lift the receiver into place, but I managed to do it myself. Tools needed are a ratch or open-end wrench, plastic prybar or screwdriver, and a rubber mallet.

The receiver is solid and looks great. Clearance seems the same and I have not scraped the bottom of the receiver or anything hitched to it on anything so far. I have a steep street entrance apron and have not had any problems. I mount a 4-bike platform rack on it and it goes in easy and feels solid in the receiver.
Very happy with this product and the purchase process.
Jt profile picture

Jt

12/22/2021

One year later and still happy with this hitch. No issues at all. I use this hitch weekly for bike racks and haul a trailer once a month. The hitch has worked fine.

by:
Excellent hitch receiver. Came with clear instructions, and looks great. It took me a couple of hours to install because I did it alone without a lift or a jack. The biggest issue was fitting the nuts through the frame because of the heat panels over the exhaust. I'm sure this would have gone easier if I had the car on a lift.
by:
2020 Hyundai Palisade
We installed the CURT C13427 Hitch and CURT CU94FR Wiring Harness in my 2020 Hyundai Palisade. The hitch is very heavy. It takes two people to position it and put the first bolts in. Once you've got one in on each side, the rest is easy. The supplied parts were high quality and fit perfectly. The video showing how to do it on the Palisade was very good, but so too were the written instructions.

The CURT Wiring Harness was also easy to install and came with good instructions. The only thing I did different was wrap the 4 wires leading from the circuit box to the trailer plug in spiral harness wire wrap. I didn't like seeing those wires out and somewhat exposed.

I've seen the Hyundai / KIA factory towing packages. I think this combination from CURT and eTrailer is every bit as good if not better. And it cost a lot less than buying through Hyundai.
Wayne B. profile picture

Wayne B.

5/30/2021

One year later Im still VERY happy with this hitch and harness.

by:
Fast shipping, good quality, installation was easy, and looks great. Did flip some of the bolts for easier access. Not a big deal but instructions showed correct 17 and 19mm in the tools needed section but incorrectly stated 10 and 12mm in the torque instructions.
by:
Sturdy hitch clean looks after installing much better than others I have seen. I found it easier to install 2 of the bolts in opposite direction 1 so I didn’t have to cut wiring cover on drivers side and 1 on right side because it was binding up when putting into hole in vehicle. Overall really nice hitch.
Kurt profile picture

Kurt

9/1/2023

Excellent

by:
2023 Hyundai Palisade
THE WEBSITE WAS EXTREMELY EASY TO NAVIGATE AND THE SHIPPING TIME WAS INCREDIBLY FAST
by:
The video instructions online were excellent. I was able to move through the steps for my 2024 Palisade with ease and all of the mounting hardware was perfectly aligned with the set up on the frame. Great product I would recommend.
by:
The hitch came in great shape and had a nice glossy black finish. The fit was perfect for my 2020 Palisade. I give it a 5 star review. The only problem I had was during installation and getting the rubber exhaust hangers removed to drop the muffler down to complete the install. I was on my back (no lift or jack) which made it a bit more difficult. Otherwise this was an extremely easy install and just as the instructional video described. Saved big $$ I am sure from paying someone else to do it!
by:
2020 Hyundai Palisade
Great hitch, perfect fit, strong and well engineered! Completely hidden except receiver, perfectly designed to have the needed clearance from muffler and spare tire. Easy install with no modifications to the SUV.
Robert profile picture

Robert

3/15/2021

Great hitch, great finish, zero issues

by:
2022 Hyundai Palisade
Bought this for my 2022 Palisade, works great! Definitely use the videos for tips on installation, I missed a couple of steps and it was a little more difficult than it should have been!
by:
2021 Hyundai Palisade
Great instructions! Went on as-described. Holding bolts in-place while tightening/torquing was a little challenging, but doable with patience. Same with putting bottom plastic cover back on - bolts want to push it out of place - patience and a little pushing were required.
Matt profile picture

Matt

12/31/2021

Used lightly over the past year - no complaints. Would buy again!

by:
2025 Hyundai Palisade
Very straightforward installation. Bolted right up
by:
It’s been great on my 2020 Hyundai Palisade! I paid a shop to install it and they were done in 30 minutes! I like that the hitch bar is hidden.
by:
2020 Hyundai Palisade
This hitch looks miles better on our Palisade then the factory version from Hyundai. The receiver is all that hangs below the bumper, which affords a clean look. I wanted 7pin wiring, so I ordered the T-one wiring harness (118784), curt 4 to 7 pin adapter (C57672), and the curt long mounting bracket (C57202). I made a 90 degree bend in the mounting bracket 1.5 inches from the end and mounted it vertically off the hitch. This resulted in a factory look with 7 pin wiring. The vehicle is equipped with a wiring harness capped behind the rear bumper cover behind the left rear wheel. There is full 12v trailer power, ground, left turn, right turn, brake, running lights, and and extra wire that I assume is reverse lights. The t-one harness used all but the extra wire, so I was able to tap into the wires in the t-one harness for power and ground on the 7 pin. I didn’t have to touch any wires on the vehicle prior to the harness. Install was easy, besides the required bend in the wiring mounting bracket.
by:
I purchased this hitch from etrailer for my 2020 Hyundai Palisade and folks this hitch fit perfectly and looks good! It is even better looking than the OEM hitch Hyundai offers...the quality of this product is outstanding and I am extremely pleased with it!

I've puchased a hitch for my 2005 F-150 in the past from etrailer and it was the same quality and a perfect fit! I highly recommend this hitch, trust me, you won't go wrong. BTW, shipping was super fast. Below are before and after pics.
by:
2022 Hyundai Palisade
Fit just perfect. The video showed everything we needed and the hitch looks 'clean'. No cutting of fenders or anything, looks great and solid.
by:
2021 Hyundai Palisade
For some reason 1 of the bolts screwing in the sub frame of my car was not the right size. Very confused about this. The bolt that is above the manifold. Driver side.
by:
This trailer hitch is exactly what u was looking for for my Palidade. The quality and price is absolutely a no brainer. I almost spend a fortune on OEM before I found Curt class III for my Palisade. Installation was also a breeze after watching the video. Everything fits perfectly and the only thing visible is the 2" tube. I am completely satisfied with my purchase. I highly recommend this trailer hitch to all Huyndai Palisade owners.
by:
Install was easy, and the product looks great. Still haven’t tested it out yet.
Devin profile picture

Devin

7/3/2026

It’s been a year and the hitch works great! Haven’t had any issues with it and we barely notice that it’s there.

by:
Looks much nicer than the factory hitch. Fairly straightforward install. My vehicle has a heat shield that the installation video didn't seem to have, and that made things a bit more difficult as the washers wouldn't fit with the heat shield in place. Was able to find a work around. One thing to note is that the receiver is recessed about an inch from the end of the bumper. I'll need an extender to keep my bike rack from scraping against the rear of the vehicle. But towing something like a trailer shouldn't be an issue.
25
542
true
Show More Reviews

See what our Experts say about this CURT Trailer Hitch


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Jameson C
Expert Research:
Jameson C
Employee Lindsey S
Edited by:
Lindsey S
Employee Joshua S
Video by:
Joshua S
Employee Dustin K
Video by:
Dustin K
Employee Jonathan Y
Video by:
Jonathan Y
Employee Jacob T
Video Edited:
Jacob T
Employee Chris R
Video Edited:
Chris R
Employee Wilson B
Updated by:
Wilson B
Employee Michael B
Updated by:
Michael B
Employee Conner L
Test Fit:
Conner L
Employee David F
Test Fit:
David F
Employee Bradley B
Test Fit:
Bradley B
Employee John A
Test Fit:
John A
Employee Scott A
Test Fit:
Scott A
Employee Kristina F
Written by:
Kristina F

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924