Does Etrailer Trailer Hitch Receiver e95ZR For 2022 Hyundai Palisade Require Bumper Modification?

Question

Question:

This hitch supposedly fits my 2022 Palisade but will installation require trimming of my bumper moulding? If so, will the final installation look good or will it always look like something added on and not quite right?

asked by: Tom C

0

Expert Reply:

The etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" # e95ZR does not require any trimming or modification to your bumper molding or fascia. You will, however, need to remove the passenger side plastic molding temporarily but it can be re-installed right after the receiver is installed. Nothing will look out of the ordinary as you can see in the attached photos.

We do not have an installation video for this exact receiver, but I did attach an installation video regarding the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # C13427 which is nearly identical and offers the same exact process.

expert reply by: Andrew N

0

Etrailer Receiver On Hyundai Palisade
(click to enlarge)

Etrailer Receiver On Hyundai Palisade 2
(click to enlarge)

Answer 1

When we installed the Curt Hitch #C13427 on our 2020 Hyundai Palisade, the distance from the center of the hitch pin hole to the edge of the rear bumper is 5-1/2". That's slightly further out than the other hitch you were looking at. My…

view full answer...

Answer 2

The highest capacity hitch for your 2023 Hyundai Palisade is going to be the Curt Trailer Hitch Receiver item #C13427. This hitch is custom fit and bolts to your Honda with included hardware. This is a class III hitch with a 2" receiver. It has…

view full answer...

Answer 3

Hey Edward, thanks for reaching out! Thank you for your purchase of the Curt Trailer Hitch Receiver #C13427 for your 2024 Hyundai Palisade! When it comes to an adapter that increases the height of the bike rack, generally bike rack manufacturers…

view full answer...

Answer 4

We have both a trailer hitch receiver as well as the wiring you need for your 2024 Hyundai Palisade. I verified both fits directly with the manufacturer for you, and the correct parts are the following: - Curt Trailer Hitch Receiver #C13427 -…

view full answer...

Answer 5

We have a couple options on trailer hitches that are confirmed for your 2023 Palisade, which are The Curt #C13427, and the etrailer #e95ZR The two hitches are indeed very similar but each hitch has something the other does not. The Curt Hitch #C13427…

view full answer...

Answer 6

Curt does make really great trailer hitch and we do recommend them highly. We have a fit for your 2020 Hyundai Palisade too with the part #C13427 but the part number you mentioned is not a fit. This is a mostly hidden trailer hitch with plenty of…

view full answer...

Answer 7

The difference between the etrailer #e95ZR and Curt #C13427 trailer hitches for your 2023 Hyundai Palisade is literally just the finish. The etrailer hitch has a matte black finish while the Curt hitch has the classic glossy black finish that we see…

view full answer...

Answer 8

The #391CONVPT5L Stealth Hitch you'd looked at doesn't include the receiver that's designed for towing, it's meant for hitch mounted accessories only, but there are options that would allow you to tow your boat. To tow your boat,…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Does Etrailer Trailer Hitch Receiver e95ZR For 2022 Hyundai Palisade Require Bumper Modification?

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching