bing tracking image
  1. Trailer Hitch
  2. CURT
  3. 2 Inch Hitch
  4. Class III
  5. 6000 lbs GTW
  6. Concealed Cross Tube
THIS ITEM IS NOT A FIT FOR
2003 Cadillac Seville
CURT

Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"

Part Number: C13309
In Stock
$234.67
Retail:$354.95
You Save: $120.28
Trailer Hitch
Not Confirmed to Fit

2003 Cadillac Seville

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
By submitting this form, you understand and agree to our Terms of Sale, Website Terms of Use, and Privacy Policy.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant. Great Prices for the best trailer hitch from CURT. Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" part number C13309 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (53)
  • Q & A (0)
  • Photos

CURT Trailer Hitch - C13309

  • 2 Inch Hitch
  • Class III
  • 6000 lbs GTW
  • Concealed Cross Tube
  • 900 lbs TW
  • CURT
  • For Towing
  • 6000 lbs WD GTW
  • 900 lbs WD TW

This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.


Features:

  • Custom fit is designed specifically for your vehicle
  • Precision, robotic welding maximizes strength and improves fit
  • Bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at etrailer.com
  • Gloss black powder coat finish over protective base coat offers superior rust resistance
  • Sturdy, square-tube design
  • Ball mount, pin and clip sold separately
  • Hitch assembled in the USA
    • Mounting hardware may be imported


Specs:

  • Receiver opening: 2" x 2"
  • Rating: Class III
    • Maximum gross trailer weight: 6,000 lbs
      • Maximum GTW when used with weight distribution: 6,000 lbs
    • Maximum tongue weight: 900 lbs
      • Maximum TW when used with weight distribution: 900 lbs
  • Limited lifetime warranty


etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.



13309 Curt Class 3 Trailer Hitch Receiver

Installation Details C13309 Installation instructions

This Product Fits The Following Vehicles


Weight Carrying Capacity
Gross Towing Weight (GTW):
6,000 lbs.

Tongue Weight (TW):
900 lbs.


Weight Distribution Capacity
Gross Towing Weight (GTW):
6,000 lbs.

Tongue Weight (TW):
900 lbs.



No drilling required Manufacturer Estimated Installation Time

Tech Tip

Driver side tow hook will be removed for hitch installation. No drilling through vehicle frame required for installation , Spare tire will need to be lowered or removed temporarily for hitch installation , Fascia trimming required for installation



California residents: click here


Customer Satisfaction Score:

Ratings & Reviews

4.8

53 reviews
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.

by:
2020 Nissan Pathfinder

The trailer hitch itself is well made and solid. The screw holes didn’t match up exactly and I ended stripping 4 out of the 6 bolts given since I tried screwing them in at an angle. I had to get new bolts



by:

Great hitch at a great price. Fantastic customer service and super easy to install with the video instructions. You will want a second person to help with the install but otherwise a simple job with a few sockets (and a Dremel to cut out the notch in the bumper).



by:
2016 Nissan Pathfinder

Very nice hitch. Powercoat is nice and thick so corrosion won't be an issue. I tried to order one that would fit in the factory opening in the bumper ,but as you can see it fits below with some minor trimming.

Mike profile picture

Mike

8/24/2020

Working great, no issues



by:

Easy install instructions.



by:
Nissan Pathfinder

The service from etrailer was very good and professional and the video's very helpful to use, I installed it with a in about 30 minutes. the quality of the hitch is good and constructed well, we have used it 4 times since purchasing it. It especially helpful to use during the holidays to make room for all of our packing. we have a Nissan Pathfinder. the only thing I would recommend is buying a 2 inch trailer hitch rise, because when the cargo basket is fully loaded it can scrape the drown goin up or down sloped driveways.



by:
Nissan Pathfinder

Solid. I tow a 20 Foot Pontoon. with a Pathfinder. 6 or 7 times a summer. I have to use an 8" Rise receiver to get the trailer leveled off. If I had the hitch at the factory height i could probably use a 4" riser. Other than that, I can't complain. The kit came with all the electronic parts needed to " Go Live" and tow.



by:

Great product and easy to install. Etrailer was helpful in making sure I purchased the right hitch.

Thomas F. profile picture

Thomas F.

5/2/2021

Hitch is working great.



by:

I installed this hitch myself, it took about 1 1/2 hours. The electrical harness and relays were easily installed with little electrical or mechanical knowledge. The video made it simple. I have used my hitch many times and I have had no issues with the mounting or the electrical. I’m glad I purchased it!



by:

Great hitch. Fit perfectly and was really well built. A big Thank you to etrailer for their help in making my order right. Package was damaged in shipping, and they went out of their way to make it correct. Thanks again.



by:
2018 Nissan Pathfinder

This class 3 hitch came on time, good price. It's going on a 2018 Nissan Pathfinder, not exactly a tow-truck but primarily to be used to mount a bike rack. The hitch is extremely sturdy and well built with good powder coat paint. I'd buy it from you again.



by:

Product came fast and seems solid all around(haven't tested it yet), definitely a two person install job. Everything fit okay, when it was in position, doesn't clear bumper(have to push it out and remove brackets). Also, the videos showed a spot to mount the electrical, this one is missing that feature, I had to get crafty and use U bolts and L brackets to make my own mount for the electrical stuff.



by:
2017 Nissan Pathfinder

Hitch appears to be good quality and will do the job. It was not too difficult to install but a second pair of hands would have been nice. Happy with this hitch and the service from etrailer.



by:

This is the second hitch I’ve ordered from etrailer and have been very happy both times. The first one arrived the day after the early received date but it was due to a snow storm and the second arrived a day before the received window. Both were the free shipping option so still very fast. The videos are super helpful for install.



by:
2019 Nissan Pathfinder

I ordered the hitch and it was delivered quicker than I anticipated. It came in a box that had a few holes in it. Turns out the hardware and instructions were missing from the box.

I called customer service and they were very friendly and helpful. They sent replacement hardware and instructions and I received the replacements the day after I called them at no extra charge.



by:
2017 Nissan Pathfinder

Very easy to install. Super clear instructions.
Can be installed without any ramp, just slide down on a mat.
Installation required to cut a small piece of plastic from fascia, I did it using occilating multitool.
Need to have ratchet with 6/10 inch extension



by:

Great Hitch, easy to install. Tow a very tongue heavy trailer- handles beautifully.



by:
2017 Nissan Pathfinder

excellent service on the phone with timothy. hitch and wiring fit perfectly. very pleased with the video about installation. helpful. thank you



by:
2018 Nissan Pathfinder

High quality hitch



by:
2015 Nissan Pathfinder

Great fit, easy installation and fast shipping.
Company
does care about their product and I love video manuals they create.



by:

Great hitch, it took me 1.5 hrs to install, and as always etrailer gives awesome customer service!!!



by:
2018 Nissan Pathfinder

The hitch was a perfect fit for my 2018 Nissan Pathfinder. I plan to be pulling a camper real soon. This looks factory installed. Great product.



by:
Volvo Cross Country

Worked great for towing a cargo rack on my cross country trip!



by:

The trailer is good! I’ve been hauling 6ft trailer several times. It works perfect.



by:

This hitch installed exactly as the instructions said. Couldn't be happier!



by:
2019 Nissan Pathfinder

Have not attached this to the car yet. My wife mistakenly thought the wiring package was included. Item was shipped as quickly as promised and just arrived this afternoon.


25
53
Show More Reviews

See what our Experts say about this CURT Trailer Hitch

  • How to Mount a 7-Way Connector on a 2017 Nissan Pathfinder with the Curt Hitch # C13309
    If you were to install the Curt Trailer Hitch Receiver # C13309 on your 2017 Nissan Pathfinder then you would need to mount the Curt T-Connector # C56357 directly to your rear bumper fascia using the mounting bracket # PK12711U. To avoid this you can use the Curt Easy Mount Bracket # C58000 instead. Since the Draw-Tite Trailer Hitch # 76031 does sit below the rear bumper fascia you would be able to use the no-drill mounting bracket # C57202 along with the part # PK12711U. The Curt T-Connector...
    view full answer...
    Image 1 for
  • Comparing Curt and etrailer.com Hitch for 2018 Nissan Pathfinder
    Curt actually makes the etrailer.com hitches like the part # e98908 that you referenced which is why it's basically identical to the Curt # C13309 that fits your 2018 Nissan Pathfinder. It is a somewhat new hitch line we started offering but not brand new. This means that the install video for the Curt (attached to this page) would cover the install of the # e98908 as well. The hands free liftgate of your Pathfinder will still work but you just would have to kick your foot to either side...
    view full answer...
  • Recommended Trailer Hitch and Wiring Harness for 2017 Nissan Pathfinder
    The trailer hitch I highly recommend for your 2017 Nissan Pathfinder is the Curt # C13309 because it has a concealed crosstube and is a bolt-on installation that will not require drilling into your vehicle's frame to install. This Class III, 2" trailer hitch is almost entirely hidden behind your bumper, has a black powder coat finish to protect it from corrosion and also has a 6,000 lb towing capacity and 600 lb tongue weight capacity. The Curt # C13309 is made in the USA and comes with...
    view full answer...
  • Recommended Trailer Hitch and Wiring Harness for a 2019 Nissan Pathfinder
    Hey Kat yes we do have something for your 2019 Pathfinder. For a hitch I recommend checking out the Curt Trailer Hitch Receiver # C13309. This hitch is custom to your Pathfinder, has a 2" receiver, a 900 lb tongue weight, and a 6,000 lb weight capacity. For wiring, I'd recommend going with the Hopkins Plug-In Simple Vehicle Wiring Harness with 4-Pole Connector # HM11143690, which is a plug and play harness that easily provides a 4 pole at the back of your vehicle. Both of these products...
    view full answer...
  • How To Mount A 7-Way Connector On A 2019 Nissan Pathfinder With The Curt Hitch C13309
    To install a 7 -Way connector you will need the T-connector and mounting bracket compatible with your 2019 Nissan Pathfinder. I recommend the T-One Vehicle Wiring Harness for Factory Tow Package # 118273 as a simple, plug and play solution that does not require splicing of wires to install. The 2 connectors are found usually in the far rear drivers side compartment. The Mounting Bracket and Installation Hardware # PK12711U will then help in providing a clean look for your 7-Way connector....
    view full answer...
  • Trailer Hitch Recommendation for 2020 Nissan Pathfinder
    For your 2020 Nissan Pathfinder we have the Curt hitch part # C13309 as a confirmed fit that would work really well. It has a hidden crosstube so it's mostly out of plainsight, installs easily, and has great towing capacities. I attached a picture of what the hitch looks like installed as well as an install video too.
    view full answer...
    Image 1 for
  • Recommended Hitch, 7-Way Connector, and Mounting Bracket for a 2020 Nissan Pathfinder
    I'll start out by confirming that the Curt Hitch item # C13309 you were looking at does fit the 2020 Nissan Pathfinder. I have attached an installation video below along with the instructions so you can see how to get it set up. To add a 7-way connector, I recommend the T-One Vehicle Wiring Harness item # 118273. This custom-fit T-One connector plugs into your Pathfinder's factory tow package wiring harness, which is located just behind the rear bumper, near the center of the vehicle....
    view full answer...
  • Should Trailer Wiring Be Installed with Trailer Hitch or Can it Wait til Later
    Trailer hitch installs and trailer wiring installs are totally separate processes. It wouldn't be a situation where "well, you're already half way there may as well do the wiring too." So if you wanted to start with a hitch now like the # C13309 and then do the wiring part # C56281 now or at a later date you'd have the same amount of work either way. I attached install videos for both of these for you to check out as well.
    view full answer...
  • Recommended Hitch and Wiring Harness for a 2017 Ram ProMaster City and Install Methods
    On your 2017 Ram ProMaster City van it doesn't matter. The etrailer Hitch item # e96YR installs behind your rear bumper and the Curt 4-Way Wiring Harness item # C56270 installs behind your rear tail lights and inside the door frame. I have linked installation videos below along with the instructions so you can see the process for both the hitch and wiring harnesses. I also recommend using the No-Drill Mount Bracket item # 18136 and the item # C42CR to secure the 4-way connector to your...
    view full answer...
  • 7-Way Vehicle Connector for 2020 Nissan Pathfinder
    Since your 2020 Nissan Pathfinder has the factory towing package, I recommend the Tekonsha T-One Vehicle Wiring Harness for Factory Tow Package - 7-Way Trailer Connector item # 118273. This wiring harness attaches below your vehicle into the existing factory ports. I have attached a picture and linked an installation video to help guide you through the install process. I also recommend purchasing the Curt Towing Starter Kit for 2" Hitches item # C45534. This kit will provide you with...
    view full answer...
    Image 1 for
  • Does Draw-Tite or Curt Hitch Have Better Ground Clearance for 2019 Nissan Pathfinder
    When we installed the Draw-Tite # 76031 and Curt # C13309 trailer hitch receivers on a 2018 Nissan Pathfinder - which is the same body as a 2019 Pathfinder - we found that the Draw-Tite had both better ground clearance and better bumper clearance. The Curt measured 14 inches from the ground to the top of the hitch with 5 inches from the hitch pin hole to the end of the bumper, while the Draw-Tite measured 14-1/2 inches from the ground and 4 inches from pin hole to the end of the bumper. Due...
    view full answer...
  • Bracket for Mounting 7-Way Install on 2019 Nissan Pathfinder with Curt Hitch
    Since the Curt hitch part # C13309 that fits your 2019 Nissan Pathfinder doesn't have a trailer wiring bracket (none of the hitches for your vehicle do) the best options is to use a bracket # PK12711U attached to the lower rear fascia so that you can easily mount the 7-way kit that also fits your vehicle part # C56357. I attached a picture that shows what the wiring connectors look like at the rear of your vehicle as well.
    view full answer...
    Image 1 for
  • Best Trailer Hitch for 2019 Nissan Pathfinder
    Hands down the best trailer hitch for your 2019 Nissan Pathfinder is the Draw-Tite Trailer Hitch # 76031 over the Curt Trailer Hitch # C13309 because it has the better clearances as well as the easier installation. The Draw-Tite hitch has better ground clearance than the Curt, has better bumper clearance, and does not require either lowering the spare tire to install or trimming the fascia under the bumper, which are both steps necessary to install the Curt hitch. I have added links to...
    view full answer...
    Image 1 for
  • Installing a Hitch on a 2017 Nissan Pathfinder SL with Motion Liftgate Sensor
    The Curt Class III Trailer Hitch, # C13309, is confirmed to fit your 2017 Nissan Pathfinder. My contact at Curt confirmed with me that the hitch will not interfere with the relay that is located at under the bumper. The hands free lift gate feature will still be enabled after installation of the Curt hitch. However if you're trying to activate it with your foot directly under the hitch receiver opening it probably won't work. Just keep your foot to the side of the receiver tube and it...
    view full answer...
    Image 1 for
  • How to Mount 7-Way Connector to Hidden Curt Hitch C13309 on 2019 Nissan Pathfinder
    With the Curt Trailer Hitch Receiver # C13309 installed on your 2019 Nissan Pathfinder, which as you mentioned features a hidden crosstube that stays tucked behind the rear bumper, you will just need to mount the 7-Way bracket directly to the bumper fascia using something like the Pollak # PK12711U. If you'd rather not bolt anything directly into the fascia, another good option is with the Curt Easy Mount Bracket # C58000. This will attach directly to the hitch receiver on the Curt Trailer...
    view full answer...
  • Can Trailer Hitch Installed on 2016 Nissan Pathfinder Be Moved to 2019 Model?
    The answer to your question will depend on which hitch you have installed on the 2016 Pathfinder. If it's a Draw-Tite # 76031, it can be removed and installed on your 2019 Pathfinder. If you have the Curt # C13126, it will NOT fit on your 2019 Pathfinder. The correct Curt hitch fit for your 2019 would be part # C13309.
    view full answer...
  • Does Curt Hitch for 2020 Nissan Pathfinder Affect Sonar Sensors
    The Curt hitch part # C13309 that you referenced is a confirmed fit for your 2020 Nissan Pathfinder and would not affect the sonar sensors the vehicle has in the rear bumper.
    view full answer...
  • Comparison of 2018 Nissan Pathfinder Trailer Hitches
    For your 2018 Nissan Pathfinder, the hitch manufacturers have all specified the same weight capacities. Curt # C13309, Draw-Tite # 76031, and etrailer # e98908 all have 900 lb tongue weight and 6,000 lbs towing capacity. I recommend the least expensive options at the time of purchase because they all are great quality hitches with the biggest difference between them being the etrailer hitch has a flat/matte black finish versus the high gloss black of the other two.
    view full answer...
  • Comparison of Draw-Tite and Curt Trailer Hitch Receivers for a 2017 Nissan Pathfinder
    I prefer the Curt, part # C13309, over the Draw-Tite, part # 76031, for a trailer hitch receiver on your 2017 Nissan Pathfinder. I like how the Curt hitch is mostly hidden behind the rear bumper and the only part you see is the receiver opening and safety chain loops. With the Draw-Tite you can see part of the crosstube under the bumper. Although, it doesn't require any fascia trimming and the price is better. I've linked a video from when we installed the Draw-Tite on a Pathfinder...
    view full answer...
  • Towing a Trailer and Carrying Bikes at the Same Time with a 2018 Nissan Pathfinder
    There are ways to accomplish what you want but there are some other things to think about first. The most important thing to consider for your situation is how much rise or drop you need to tow the trailer level. Because if an adapter is used (or even if it isn't) then the ball mount has to have the right amount of rise or drop to tow the trailer level. So if we look at the available hitches the one that will provide the most ground clearance is # C13309 (excludes platinum models). Once...
    view full answer...
    Image 1 for
  • Trailer Hitch and Wiring Recommendation for 2018 Nissan Pathfinder
    The trailer hitch I recommend for your 2018 Nissan Pathfinder is the Curt hitch part # C13309 because it has plenty of towing capacity, is made in the USA, and has a concealed crosstube which means it will be less visible than most hitches. For trailer wiring I'd then recommend the Tekonsha 4-Way part # 118670 which comes with all of the needed relays and harnesses to install without requiring any splicing. I attached an install video for this for you to check out as well. Since you...
    view full answer...
    Image 1 for
  • Trailer Wiring Kit and Hitch Recommendation for 2019 Nissan Pathfinder
    For a 4-way trailer wiring harness for your 2019 Nissan Pathfinder I recommend the # 118670 which installs very easily and comes with everything needed to give you the 4-way you'll need to tow your pop up. I attached an install video for this on a similar 2018 Pathfinder. If you needed a hitch too the Curt Class III part # C13309 is a really great option too. It has plenty of capacity and is mostly hidden since only the hitch opening hangs below the rear bumper.
    view full answer...
    Image 1 for
  • Can the Curt # C13309 Trailer Hitch be Installed on a 2018 Nissan Pathfinder with Liftgate Sensors
    Yes, you can install the Curt Trailer Hitch Receiver # C13309 on your 2018 Nissan Pathfinder even though it has the kick liftgate sensors. The only potential difference is that you may just have to kick to the left or right of the receiver instead of just waving your foot beneath the bumper. There is some minor fascia trimming that needs to take place and the driver side tow hook will need to be removed to install the trailer hitch, but Curt has only rated the install a 5 out of 10 for...
    view full answer...
  • Are Trailer Hitches Checked Before Shipping?
    Before a hitch is shipped we do check for paint being chipped off and one is never sent with chipped paint so rest assured the hitch you get will leave our warehouse in perfect condition. For a hitch to use on your 2017 Nissan Pathfinder I highly recommend going with the Draw-Tite # 76031 because it will not require any trimming of the fascia during installation like the option from Curt # C13309 will. You can power your trailer's lights by adding a 4-flat to your Pathfinder with the...
    view full answer...


< Previous
12



Do you have a question about this Trailer Hitch?


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Jameson C
Expert Research:
Jameson C
Employee Lindsey S
Edited by:
Lindsey S
Employee Joshua S
Video Edited:
Joshua S
Employee Jacob T
Video Edited:
Jacob T
Employee Chris R
Video Edited:
Chris R
Employee John S
Video Edited:
John S
Employee Wilson B
Updated by:
Wilson B
Employee Kristina F
Updated by:
Kristina F
Employee Isabelle B
Updated by:
Isabelle B
Employee Noah M
Updated by:
Noah M
Employee Amanda M
Written by:
Amanda M
Employee Jonathan Y
Video by:
Jonathan Y
Employee Robert C
Test Fit:
Robert C
Employee Conner L
Test Fit:
Conner L

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.