bing tracking image
  1. Trailer Hitch
  2. CURT
  3. Class II
  4. 1-1/4 Inch Hitch
  5. 3500 lbs GTW
  6. Visible Cross Tube
THIS ITEM IS NOT A FIT FOR
1992 Subaru SVX
CURT

Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"

Part Number: C12108
In Stock
$192.93
Retail:$313.95
You Save: $121.02
Trailer Hitch
Not Confirmed to Fit

1992 Subaru SVX

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Perfect for light-duty towing, this custom, vehicle trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately. Great Prices for the best trailer hitch from CURT. Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4" part number C12108 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (259)
  • Q & A (0)
  • Photos

CURT Trailer Hitch - C12108

  • Class II
  • 1-1/4 Inch Hitch
  • 3500 lbs GTW
  • Visible Cross Tube
  • 350 lbs TW
  • CURT
  • For Towing

Perfect for light-duty towing, this custom, vehicle trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately.


Features:

  • Custom fit is designed specifically for your vehicle
  • Precision, robotic welding maximizes strength and improves fit
  • Bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at etrailer.com
  • Gloss black powder coat finish over protective base coat offers superior rust resistance
  • Stylish, round-tube design
  • Drawbar, pin and clip sold separately
  • Hitch assembled in the USA
    • Mounting hardware may be imported


Specs:

  • Receiver opening: 1-1/4" x 1-1/4"
  • Rating: Class II
    • Maximum gross trailer weight: 3,500 lbs
    • Maximum tongue weight: 350 lbs
  • Limited lifetime warranty


etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.



12108 Curt Class 2 Trailer Hitch Receiver

Replaces 12000

Installation Details C12108 Installation instructions

This Product Fits The Following Vehicles




Customer Satisfaction Score:

Ratings & Reviews

4.7

259 reviews
Perfect for light-duty towing, this custom, vehicle trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately.

by:
2016 Toyota RAV4

I ordered the 1 1/4 inch (C12108) hitch to install on my 2016 Toyota RAV4. I chose the 1 1/4 inch because it will be used exclusively for a bike rack. My hitch was shipped the same day I ordered it! Installation was straightforward and the holes lined up perfectly. I could not be more satisfied with etrailer or the hitch and would happily do business with them again.

Bruce profile picture

Bruce

3/28/2019

Great! Its gone through a harsh Wisconsin winter - salt, grime, etc and after rinsing off it looks like new and functions perfectly.



by:
2010 Toyota RAV4

The Curt C12108 hitch was shipped quickly and arrived on the scheduled day. etrailer packaged the hitch well and it arrived in good shape.

There was one very small 1/4" scratch in the paint which I touched up with black tinted epoxy. The only reason I mention this is because the scratch allowed me to observe Curt's powder coating. This coating is really thick, similar to baked on enamel. This looks like a much better (and hopefully rust resistant) finish than I've seen on other brand hitches. I've had to touch up rust on my 2010 Rav4 Hidden Hitch several times.

Installation of the Curt C12108 was easy, exactly as shown in erailer's video. I've read other reviews where the bolt holes didn't line up, but my hitch was a perfect fit. In the video, they say you won't be re-using the panel on the driver's side. In fact, it's easy to re-use it with a minor modification. I used a coping saw blade to cut off one corner so it would fit around the hitch. The panel is still held on at the 3 original points, with enough clearance so it isn't rubbing against the hitch and to allow for drainage.

Overall, I am very pleased with this hitch and would not hesitate to recommend it to a friend.



by:
2016 Toyota RAV4

Received this hitch very promptly! There was slight paint chipping from the shipping process but a little touch up paint and it was ready to be installed. Install was pretty easy. You have to remove a plastic baffle to access the driver side weldnuts but once out of the way the next hardest part is popping off the muffler is isolator from the hanger. The rest is easy, including trimming of the baffle to install after the hitch. Overall I’m happy with this purchase. It looks nice and doesn’t hang lower than anything else below the car. I’m only using this for a bike rack so I did not do any wiring.



by:

The hitch arrived early, and the tracking site worked perfect. Just installed it with a quick watch of the video of the year make and model of the vechicle, that was provided in the purchase email. All in all it took 15mins of work only because I didn't have an extra set of hands to help me. The fit was perfect. The video was spot on. If I ever need an after market hitch I will diffinatly use you guys again. Fantastic suppport and communication. Good job guys it's rare for a company this day in age.



by:
2016 Toyota RAV4

Rugged product. Nice paint job. easy installation on the 2016 RAV4 Hybrid. no problems. highly recommended. quality for a great price.



by:

Excellent product. We did have to ream 2 holes just a bit. Other then that it was a very easy install. And we were able to install it without dropping the muffler off its hanger.



by:

Great product..Cathy was very helpful..arrived within 2days..great video for installing..everything went just as the video portrayed..only problem was the weather, it warmed up to 30 degrees and I went for it in my unheated garage. Thankfully all the bolts went in smoothly...would definately recommend these guys.



by:

This is the second etrailer hitch I've bought, the first for my Prius and this one for my RAV4. Installation was breathtakingly simple and the instructions made it a flawless install. These folks are great.

Christopher D. profile picture

Christopher D.

5/21/2021

A year later, and Im still delighted both with the hitch itself and the wiring kit for lights. I couldnt be more pleased with these products, the instructions that are available for installation, or the company itself.



by:

Almost paid to have installed, so glad I did it myself. Easy and less than 30 minutes to do. One issue: 2 of 4 bolts were unusable. No threads on one, other one bad lead thread. I will call service for replacement bolts

Brooke M. profile picture
Etrailer Expert

Brooke M.

7/13/2023

It looks like we are sending you that hardware! Thanks for reaching out to us about this so we could finish the job and get you taken care of.

Charles profile picture

Charles

7/10/2024

Have used my hitch several times and works as it should.



by:
2016 Toyota RAV4

My hitch arrived in mint condition and was easy to install with the 4 included mounting bolts. It went on in about 20 minutes. It is the perfect hitch for my new bike rack hitch trailer for my SUV. Although I haven't taken it out on the road yet, I'm sure it will be a-ok. This was a super easy shopping, purchase, and installation experience. Thank you.

Julia K. profile picture

Julia K.

4/4/2018

Hi, yes, I’m still loving my bike rack and everything is aces. It works wonderfully. Thank you.



by:
2015 Toyota RAV4

Ordering and delivery were excellent. Hitch was well packed. Custom fit with a capital "C". Fit perfect. Instructional video was excellent. Only one small hiccup - the "tie down bracket" on my 2015 RAV4 Limited has a plastic cover panel. It was easy to remove, but it had to be modified to replaced after the hitch installation. I just use some old tin snips to cut away a small part of the plastic cover before reinstalling. Not a real issue. Just looking at the hitch, you can see how well made and solid it is. Would highly recommend.

Brian profile picture

Brian

5/1/2015

I also have a 2015 RAV4 and thought we would get this and try the self-install. Thanks for mentioning the cover panel. Do you have any other tips or suggestions?

Wayne profile picture

Wayne

5/14/2015

Because your RAV4 is fairly new like mine you should find it very easy to slide the muffler out of its hangers per the video. I would also recommend that you use a torque wrench on the 4 bolts. It might help to have someone help hold it up while starting the bolts, but it can be managed by yourself if no one is available.



by:
2013 Toyota RAV4

Great instructions, easy install! I'm a fairly old (50), fairly small (5'5") woman with all the right tools and installed this hitch on my 2013 RAV4 by myself. One of the bolt holes was corroded and took a bit of cleaning and coaxing, but that was the only hitch (pun intended). If you need me, I'll be on the bike trails. Thanks so much!!

Andrea profile picture

Andrea

10/4/2016

Just great and still looks like new!



by:

Trailer hitch fit perfectly first time install, about 1.5 hours in total time including wiring. Easy to install, pulls 5x8 trailer easily. Also holds bike rack, carrying a tandem bike. Good price, great product.

Ron K. profile picture

Ron K.

9/8/2020

Trailer hitch works great. Use it to ferry tandem bicycle weekly to starting point for long rides around town. Use it to occasionally pull 5x8 trailer with complete confidence, no issues ever.



by:

Easy peasy,..I'm 71,but trying to keep wrenching,..watched your install video...very helpful!!,...got satifaction of doing it myself!



by:
2014 Toyota RAV4

I purschased this product to attach a Thule Bike rack to my vehicle. The hitch arrived in a timely manner. All parts were present and instructions included. I did view the install video on the website. It was great!

This was VERY easy to install by myself. It took about 20-30 min.

- Chris

Chris profile picture

Chris

12/31/2015

Works great, thank you!



by:
2013 Toyota RAV4

This hitch was very easy to install. You do need to drop the tail pipe, but no bolts need to be undone. I use the hitch to hold a bike rack or a luggage carrier, not to tow anything heavy. It functions very well for that.

Daniel W. profile picture

Daniel W.

11/17/2017

I still have not towed a trailer with it and just use it for a bike carrier. It is working well.



by:
2011 Toyota RAV4

I'm sure it will meet my needs but, I believe there was a problem with quality control. It appeared that a final check on all measurements was not made because the bolts did not line up with the frames threaded holes which caused a somewhat frustrating mounting process. Still, it was not to difficult to pry the hitch into place and I eventually got it mounted and all is well.

No, I have no reason to believe the frame has had damage!

David A. profile picture

David A.

8/21/2016

Good product...no complaints



by:
Toyota RAV4

I Installed this hitch on my Toyota RAV 4 by myself in just 25 minutes. It bolted right up and fit great. The wiring harness took a little longer as I followed the directions to the letter. They both work great.

Douglas J. profile picture

Douglas J.

4/16/2015

I have bought over 10 hitches from etrailer and they all fit great, were as described to install and the never let me down.



by:

Easy to install. Great instructions. Use it to put a bike carrier on it. As an older female I am able to use this without any problems. Companies web site suggests which is the best hitch for your car.

Dorothy profile picture

Dorothy

12/6/2018

After one year still wonderful. Now thats how I like to feel about a purchase. Use it a lot for carrying my bike. It feels secure and safe as I drive along the road. Great product.



by:
2015 Toyota RAV4

Really like the hitch, the price and the speed in which the order was processed and delivered. Slight issue with the install as the holes barely lined up on the one side even after lowering/loosening the other side a considerable amount.

Overall, really happy with it.

Dave S. profile picture

Dave S.

8/23/2016

All is well with the hitch....thanks



by:
2015 Toyota RAV4

Hitch was great and delivered on time. Had it installed by a local shop. Will use etrailer again.



by:
2012 Toyota RAV4

Great product! Exceptional price. I purchased this hitch for my wife's 2012 TOYOTA RAV4. It's used for hauling our bicycles around and I have had no problems or issues. As always etrailer, I continue patronize your online store.

Oscar L. profile picture

Oscar L.

6/7/2018

No issues at all!!!



by:

I purchased this hitch for my 2016 Rav4 Limited that I had recently bought. I did a TON of research mainly using the resources provided by etrailer.com. I had actually found the price cheaper somewhere else and they matched it with just a simple phone call. It was shipped and delivered within the week that I purchased it, which was shocking since other vendors were estimating about 2-3 weeks ship time.

The hitch was easily to install, so easy I felt stupid for ever paying and dealing with [rental trailer corporation] in the past. etrailer provides simple to follow instructions making installation time less than 45 minutes. I mainly use this hitch for my bike rack but have pulled small trailers with dirt bikes no problem.

I would highlight recommend this hitch and would purchase again from etrailer.



by:

Despite the oblong bolt holes in the unit, it was still just slightly too narrow to match the holes on my car. Customer service said this was uncommon but not rare and does happen occasionally. Told to bend the wings apart and suggested 3 methods to accomplish this. I used a hydraulic jack and a 2X4 to expand the wings to make it fit. So much for a guaranteed fit. Etrailer should state this condition as a possibility and even make a video of the process. The surprise was worse than the fix.

Product did not fit, not delivered as advertised, company not upfront with potential instillation problems.

Laura E. profile picture
Etrailer Expert

Laura E.

11/10/2017

Robert, thank you for taking the time to submit this review. Because of their size and shape, sometimes trailer hitches get flexed during shipping or transport. However, I have good news! We have a great help article on how to remedy this situation. This article may be found at the following link:



by:

Hitch was super easy to install. Have only used it with the Swagman XC 2 bike rack.
The bike rack did not fit very snugly in the hitch. After bikes were put in the rack, that looseness allowed the bikes to sway back & forth rather alarmingly. We ended up getting a tie down strap to keep the bikes from swaying. I don't know if the problem (the looseness of the bike rack into the hitch) was because of the hitch or if it was the bike rack being just a shade small for the hitch.


25
259
Show More Reviews

See what our Experts say about this CURT Trailer Hitch

  • Can the Hands Free Lift Gate Still Operate When Trailer Hitch is Installed on a 2018 Toyota RAV4
    Any trailer hitch, like the Curt Trailer Hitch Receiver # C12108 that you referenced, will cause some interference with the hands free lift gate feature on your 2018 Toyota RAV4 because you are putting some metal in front of the motion sensor. You will still be able to activate this feature though with most trailer hitches by kicking straight out to either side of the hitch receiver. If you like the Curt trailer hitch design then I recommend going with the Curt Trailer Hitch Receiver #...
    view full answer...
  • Installation Instructions for Curt Class II Hitch # C12108
    The written installation instructions for Curt Class II Hitch # C12108 are linked for you along with two helpful articles with useful tips for easier hitch installation. The instructions include a list of the tools required, which include 17mm and 19mm sockets, a socket extension and torque wrench. Curt rates this hitch install as being easier than most.
    view full answer...
  • Replacement Trailer Hitch Hardware for a 2008 Toyota RAV4
    In order to replace the mounting hardware for the trailer hitch on your 2008 Toyota RAV4 you will want to use the Replacement Hardware Kit for Trailer Hitches part # RHK. Once you have arrived at the product page for the replacement hardware kit you will need to enter the hitch item number and name of the manufacturer of your trailer hitch. If you are unsure of which hitch you have you can look at the hitches I have attached for you here below and pick out the one that matches the trailer...
    view full answer...
  • Trailer Hitch Recommendation for 2018 Toyota RAV4 That Doesnt Need Stabilizer Strap
    The Class II Curt hitch part # C12108 for your 2018 Toyota RAV4 would require a stabilizer strap when carrying a bike rack. Even the Class III hitch like the Curt part # C13406 you would need to use a strap like # 18050. What's also really great about this hitch is that it has a concealed cross tube so it isn't as visible as some of the other hitches.
    view full answer...
    Image 1 for
  • Comparing Trailer Hitch Sizes for 2018 Toyota RAV4
    For your 2018 Toyota RAV4 we have Class II hitches that have 1-1/4 inch openings like the Curt # C12108 and we have what I recommend the Class III 2 inch hitches like the etrailer.com hitch part # E98864. The two attached pictures show either size. The white vehicle is a 2 inch and the blue is 1-1/4 inch. The reason I prefer the larger size hitch is because more hitch accessories are made for 2 inch hitches and they have much higher towing capacities. The only time a 1-1/4 inch hitch...
    view full answer...
    Image 1 for Image 2 for Image 3 for
  • Which Trailer Hitch For a 2016 Toyota RAV4 Does not Require a Stabilizer Strap for Bike Racks
    Curt requires the use of their stabilizer strap part # 18050 when using some of their lower capacity hitches to carry a non-supported load like a bike rack. I attached a review video for you to check for the strap as well. Because of that I would recommend you go with the ettrailer part # e98864 as it does not have that same strap requirement. The Curt hitch part # C13149 is also a fit for your vehicle, but since it is a Class III hitch with higher capacities it does not have the strap...
    view full answer...
  • Does a Trailer Hitch Void Warranty of a 2016 Toyota RAV4 Hybrid
    The Curt hitch part # C13149 is a confirmed fit for your 2016 Toyota RAV4 Hybrid and would work well for you. I attached an install video for you to check out as well. When you install an aftermarket part on your vehicle like a trailer hitch in this case, you are protected by the Magnuson–Moss Warranty Act. This act states, in part, that unless the installation and the part caused a problem then the warranty cannot be voided. I recommend looking it up online. If you wanted to do some...
    view full answer...
  • How to Carry Bikes on 2006 Toyota RAV4 Without Trailer Hitch
    We have an option for you to carry bikes on your 2006 Toyota RAV4 without using a trailer hitch, but I checked and no rack manufacturers make a bike rack that will fit over the spare tire cover on your RAV4; this type of rack just doesn't exist, unfortunately. Without a trailer hitch receiver, your only option is a roof rack, and that will depend on if your '06 RAV4 has factory installed raised rails or a naked roof. - Raised Rails: Malone AirFlow2 Roof Rack # MPG215 - Naked Roof:...
    view full answer...
  • Curt Hitch C13149 Installation on 2018 Toyota RAV4 Adventure
    I confirmed with Curt's hitch fit guide that their Class II hitch # C12108 and their Class III hitch # C13149 are correct fits on the 2018 Toyota RAV4 Adventure. We installed this item on a 2018 RAV4 and if you refer to the linked video for that installation you'll see the vehicle appears to have an identical frame setup to what is shown in your photo. You will remove those frame bolts as our technician did in the video.
    view full answer...
    Image 1 for
  • Best Hitch Ground Clearance On A 2009 Toyota Rav4
    The measurements from the ground to the top of the inside of the receiver on the Curt # C12108 is going to be 12-3/4" . You need to buy a hitch pin and clip for your accessories. Item # e95TR works well. I recommend grabbing a pin that locks because in my experience when traveling or just out running errands it gives me peace of mind knowing someone isn't going to take my expensive ball mount I'm so proud of. I use the Gen-Y Glider Shock Absorbing Ball Mount # 325-GH-12005 because it...
    view full answer...
  • Will Trailer Hitch From 2014 Toyota RAV4 Fit A 2017 Subaru Crosstrek
    The trailer hitch you have from your 2014 RAV4 is not designed to fit the 2017 Subaru Crosstrek. The hitch is designed to fit specific vehicles with the frame mounting holes. For the Crosstrek we offer two Curt trailer hitches. I recommend part # C13135. This is a Class lll trailer hitch and it has a 2-inch receiver opening. We also offer a Class l hitch, part # C11286. This hitch has a 1-1/4 inch receiver opening. I recommend going with the Class lll because there are so many more...
    view full answer...
  • Trailer Hitch, Wiring and Bike Rack for 2017 Toyota RAV4
    Two sizes/classes of hitch are available for your 2017 Toyota RAV4, a lighter-duty 1-1/4-inch Class II like # C12108 and a higher-capacity 2-inch Class III type such as # e98864. We almost always recommend the 2-inch hitch size for their higher weight ratings and since there are many more options in hitch-mount accessories (things like cargo carriers and bike racks) for the larger hitch size. Since you intend to tow a trailer you definitely will be better off with one of the Class III...
    view full answer...
    Image 1 for
  • What are the Differences Among the Class II Hitches Available for a 2009 Toyota RAV 4
    None of the Class II hitches for your 2009 RAV 4 are superior to another, but there are some differences between them they may help you make your decision. Draw-Tite and Hidden Hitch are sister companies and the Draw-Tite, part # 36588, and Hidden Hitch, part # 90207 (no longer available), are the same design. The difference between these two hitches is that the Hidden Hitch includes some extra accessories. The Hidden Hitch model includes a draw bar and pin and clip that you would need...
    view full answer...
  • Best Way to Carry Bikes with a 2011 Toyota Rav4
    The best option I could recommend for you to carry bikes with your 2011 Toyota RAV4 would be to first install a hitch and then use a hitch mounted bike rack. First you will need to start with a hitch, for that I would recommend the Curt Hitch part # C12108. Hitches are great because not only will you be able to carry your bikes, but now you could do some light towing if needed. For a bike rack the most popular rack we carry is the Swagman XTC2 part # S64670. This is a great rack at a...
    view full answer...
  • Trailer Hitch Receiver Recommendation for 2013 Toyota RAV4
    We do offer a few different trailer hitch receivers for the 2013 Toyota RAV4, one being the Class II hitch, part # C12108, that you mentioned. I have included a link to all of these options for you. My personal recommendation would be to go with a Class III hitch, like the Curt, # C13149, because it offers the 2 inch receiver opening. A 2 inch hitch typically gives more options by being compatible with more hitch mounted accessories. Just a couple of things to keep in mind. All of the...
    view full answer...
  • Curt Trailer Hitch # C12108 Installation and Rear Jack Point on 2016 Toyota RAV4
    The Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4" # C12108 for your 2016 Toyota RAV4 will block the rear jack location. I reached out to the manufacturer and you can use the hitch receiver to jack the vehicle up and then use jack stands to take the weight off the hitch.
    view full answer...
  • Recommended 1-1/4 Inch Trailer Hitch for a 2018 Toyota RAV4 SE
    The Hollywood Racks Bike Rack you have has a 1-1/4" shank. The trailer hitch I recommend for your 2018 Toyota RAV4 SE to use with this bike rack is the Curt Trailer Hitch Receiver part # C12108. This hitch will not have any issues at all with two bikes. I have attached an install video and photo of the above trailer hitch for you as well.
    view full answer...
    Image 1 for
  • Trailer Hitch For Towing a Jet Ski With a 2012 Toyota RAV4
    Yes, the Curt Trailer Hitch Receiver # C12108 has been tested to be strong enough to tow 3,500lbs with 350lbs of that being tongue weight, which is plenty for a jet ski. This exceeds the rating on your 2012 Toyota RAV4. If you have the V6 your tow rating is 2,000lbs or with the Inline 4 you will be able to tow 1,500lbs. You will want to ensure that the jet ski and trailer with all the gear you will carry do not exceed the ratings given by Toyota. I recommend the Hopkins Plug-In Simple...
    view full answer...
  • Class II and Class III Trailer Hitches for 2016 Toyota RAV4 Hybrid
    We can offer you either a 1-1/4-inch Class II hitch # C12108 or a 2-inch Class III hitch # C13149 for your 2016 Toyota Rav4 Hybrid. These models, engineered primarily for the gas models, do also fit the hybrids. They do not fit the full electric versions. I confirmed this with my technical contact at Curt. I recommend you go for the larger Class III hitch unless you have a specific need for a smaller 1-1/4-inch. A 2-inch Class III hitch will offer broader compatibility with a wide range...
    view full answer...
  • Will a Curt Trailer Hitch from a 2008 Toyota RAV4 Fit a 2014 Toyota RAV4
    Both Curt trailer hitches offered for the 2008 Toyota RAV4 will fit the 2014 RAV4, so yes, you can reinstall your hitch on the new RAV4. I recommend using new installation hardware. The installation hardware is meant for one time use only. For new hardware, you can use part # RHK. Simply enter the part number of your hitch and the manufacturers name and we will ship you new replacement hardware.
    view full answer...
  • What Size Bolts Come with the Curt Trailer Hitch part # C12108
    The bolts that come with the Curt trailer hitch part # C12108 that you referenced are M12x1.25,35,CL10.9. We offer a way to order all of the replacement hardware for this hitch too as part # RHK. You would need to enter the part number of this hitch on the product page menu.
    view full answer...
  • Comparing Vehicle Tongue Weight Capacity to Trailer Hitch Capacity for 2016 Toyota RAV4
    Two ratings affect the towing capacity of any given vehicle. These are the vehicle's own tongue weight (TW) rating as determined by the auto maker (and noted in the owner's manual) and the TW rating of the particular hitch that is installed. Always the lower of the two ratings will become the overall rating for the combined system. For example, a car rated for 500-lbs TW and an installed hitch having a TW rating of 350-lbs results in an overall rating of 350-lbs, the lower of the two. I...
    view full answer...
  • Curt Class II Trailer Hitch # C12108 Compatibility with Bike Rack on 2016 Toyota RAV4
    For your Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4" # C12108 for a 2016 Toyota RAV4 XLE, the stabilization strap # 18050 is recommended for any non-trailer load according to the installation instructions. Since it is not required as other hitches often state and could cause damage to your spoiler, you will need to determine if you use it or not. I would recommend using the EcoHitch trailer hitch # 306-X7219 which does not require a stabilization strap, but since you...
    view full answer...
  • 1.25 Hitch Extender for 2008 Toyota RAV4 Hitch
    Extend your trailer hitch receiver opening so that you can clear your spare tire when using your hitch-mounted bike rack or so that your trailer won't hit a rear-mounted propane tank when you make sharp turns. Powder coated steel resists rust. These extender fits 1-1/4" x 1-1/4" trailer hitch receivers (Class I or Class II). We have them available in 6" # HES6 and 10" # HES0. Using a 1-1/4" extender will reduce your hitch's overall capacity by 50 percent. These extenders go well with...
    view full answer...


< Previous



Do you have a question about this Trailer Hitch?


Info for this part was:

Employee Joe V
Test Fit:
Joe V
Employee Nicholas E
Test Fit:
Nicholas E
Employee Shane T
Test Fit:
Shane T
Employee Randy B
Test Fit:
Randy B
Employee David F
Test Fit:
David F
Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee John H
Expert Research:
John H
Employee Adam R
Expert Research:
Adam R
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Zack K
Video Edited:
Zack K
Employee Joshua S
Video Edited:
Joshua S
Employee Jacob T
Video Edited:
Jacob T
Employee Andrew L
Video Edited:
Andrew L
Employee Chris R
Video Edited:
Chris R
Employee Lindsey S
Written by:
Lindsey S
Employee Kathleen M
Video by:
Kathleen M
Employee Dustin K
Video by:
Dustin K
Employee Alan C
Video by:
Alan C
Employee Zach D
Video by:
Zach D
Employee Jonathan Y
Video by:
Jonathan Y
Employee Laura H
Updated by:
Laura H
Employee Wilson B
Updated by:
Wilson B
Employee Kristina F
Updated by:
Kristina F
Employee Isabelle B
Updated by:
Isabelle B

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


<