bing tracking image
  1. Trailer Hitch
  2. CURT
  3. Class I
  4. 1-1/4 Inch Hitch
  5. 2000 lbs GTW
  6. Visible Cross Tube
THIS ITEM IS NOT A FIT FOR
2018 Keystone Springdale Travel Trailer
CURT

Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"

Part Number: C11447
In Stock
ChristmasTree SantaHat Arrives before Christmas SantaHat ChristmasTree
$229.97
Retail:$376.95
You Save: $146.98
Trailer Hitch
Not Confirmed to Fit

2018 Keystone Springdale Travel Trailer

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Perfect for light-duty towing, this custom, vehicle trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately. Great Prices for the best trailer hitch from CURT. Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" part number C11447 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (101)
  • Q & A (0)
  • Photos

CURT Trailer Hitch - C11447

  • Class I
  • 1-1/4 Inch Hitch
  • 2000 lbs GTW
  • Visible Cross Tube
  • 200 lbs TW
  • CURT
  • Custom Fit Hitch

Perfect for light-duty towing, this custom, vehicle trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately.


Features:

  • Custom fit is designed specifically for your vehicle
  • Precision, robotic welding maximizes strength and improves fit
  • Bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at etrailer.com
  • Gloss black powder coat finish over protective base coat offers superior rust resistance
  • Sturdy, square-tube design
  • Drawbar, pin and clip sold separately
  • Hitch assembled in the USA, bolts overseas


Specs:

  • Receiver opening: 1-1/4" x 1-1/4"
  • Rating: Class I
    • Maximum gross trailer weight: 2,000 lbs
    • Maximum tongue weight: 200 lbs
  • Limited lifetime warranty



etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.



11447 Curt Class 1 Trailer Hitch Receiver

Installation Details C11447 Installation instructions

This Product Fits The Following Vehicles



California residents: click here


Customer Satisfaction Score:

Ratings & Reviews

4.8

101 reviews
Perfect for light-duty towing, this custom, vehicle trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately.

by:

very nice product



by:

Great product and Service for Etrailer!



by:

Products arrived fast and in great condition. Cost was competative.



by:

fast service and easy to install can,t get any better than that



by:

Easy instillation and great customer service!



by:

Quick and easy installation. The hardest part was working around the muffler, there just isn't a lot of room. But even so, I was done in just over a half an hour. No lift, no special tools.



by:

Straight forward installation. Just remember that there is not a lot of room on the exhaust side. Even with only being half prepared and it was only in the mid-40s, I was done in just over a half hour.



by:

This is really a heavy duty hitch. Installation was pretty easy after watching the video. If you install with car on the ground, not on a lift you need to pull the muffler down and slide it in from the back. Also, both rear holes needed to be drilled out a little not just the passanger side. Took me just a little over an hour including finding all my tools. Very satisfied. I love when I make good choices!



by:
Saturn Ion

I apologize and resend my last comments.I was told my saturn Ion is not the redline series, yet after putting the hitch under the car I could see it has to fit. It fits perfect. I have it totally installed. Thank you!



by:

Great experience, Delivery time was half what I expected.
After watching the vidio it took 35 minutes, Easy instalation perfict fit with no snags. I would highly recomend your products to everyone. Your providing an exelent service & product, Keep Up The Good Job.
Dave H.



by:

Excellent product and perfect fit for my vehicle. Delivery was fast. I will certainly consider etrailer for future purchases.



by:
2007 Chevrolet HHR

Super easy to install on my 2007 HHR Panel. It took less than an hour to install with no complications at all. Exactly like the video and instructions stated. What was really amazing, I ordered this on Sunday evening, it shipped Moday and I had it on Wednesday, half way across the country.



by:
2009 Chevrolet HHR

Well made product/good serviceIt was shipped to me quickly from e-trailer - like a day went by. The hitch was very easy to install with the instructions saying 50 minutes and that was all it took me. The fit and finish is excellent and its nicely tucked under the back of my 2009 HHR.



by:
Chevrolet Cobalt

2007 Cobalt SS Supercharged



by:
Chevrolet HHR

Hitch for HHRHitch arrived with all hardware in just a few days. After watching the video on the etrailer site, I installed the hitch with no problem. Merchandsie and service are both top shelf. Thanks



by:
2008 Chevrolet HHR

I bought this hitch for the cost and because it included the draw bar and pin. There were no hidden problems. The hitch fit my 08 HHR perfectly. The video on this website is perfect, I didn't even use the included instructions. The instructions did say it would take a professional 60 minutes to complete the installation. It took me 50 and I'm not a pro by any means. The only tip I have is: if you're installing this on the ground, you'll need to jack up the back of your HHR to have room to work and the hitch will have to go straight in from the back of the car and over the muffler.
Great product, easy install, cheapest price I could find.



by:
Chevrolet HHR

Got my hitch in a couple of days. Easy to track order. Watched video which helped with the install on my HHR. Very easy to install. Did not have a lift and had to install on the ground, just be prepared for the weight of the hitch. Only took me 45 mins. with the clean up of tools. etrailer is a great online store, will order all my trailer products from them.



by:

Installation of receiver hitch was easy, thanks to your instalation videos. The Curt receiver hitch was a perfect fit. Wiring the lights was easy also with the help of the correct video. Fast shipping from your company was a + also.

Etrailer really does it RIGHT when it comes to trailer hitches and associated attachments. Prices of your equipment are very good also. Will buy from your company again when I need more hitch products.



by:

I watched the video and also studied the paper directions. It took me around 50 minutes to complete the installation, from the time I raise the car on the jack stands, to letting it back down. The only difficulty I had was holding the unit up and putting on the nuts. I used a 5 gallon bucket to hold up the other end, which helped. I also installed the wiring kit, which was simple and just as shown in the video. Excellent products and the delivery was quicker than advertised.



by:
Chevrolet HHR

I ordered 2 hitches, 1 for me and 1 for my sisters HHR. I was surprised when customer service called me back to make sure I did not make a mistake ordering 2 by accident. I installed the hitch on my HHR very easily and quickly. What a well made product, I am impressed. The shipment arrived sooner than I expected for a pleasent surprise. What a great company to deal with. I will definitly use them again.



by:
2010 Chevrolet HHR

Absolutely exactly what I was looking for. Ordered for my 2009 chevy HHR. I am mechanically inclined and being the typical guy I did not watch the video. For someone who doesn't wrench much it would probably help. The one page instructions that came with the hitch were easy enough to understand. I didn't time myself or hurry but installed it by myself in well under an hour beginning to end with cleanup. I did jack up and put the rear of my car on jack stands which I think is a must for clearance. It would be easier to have an additional person to help hold the hitch up while bolting. I would recommend threading the fish wire through both holes before adding the plates and screwing the bolts in it for the rear holes also, and the fish wire also helps on the front holes as well to not lose the bolts in the frame (attach them and then put the both in first and then the plate and pull the bolt back down). All in all simple installation once you figure out how it goes together and only one bolt hole required drilling out to make it bigger. I give it about a 3 out of 10 on technical difficulty. If you can change you oil and do simple maintenance to your car or truck you can put this hitch on no problem. Fit was awesome. eTrailer pricing and shipping awesome as well. If your looking for a great hitch this is the one.



by:

Hitch arrived friday 05/01,opened up the box spread the hitch out on the floor, later that evening while watching the 10:pm Blue Bloods started by laying out the wiring in the car but it was dark in the garage so I decded to wait untill mouring to hoch up. O730 AM 5 secounds to hock up both sides electrically, my friends car lift was down so I decided to start on the floor less than 45 minutes it was installed, I did use my floor jack to balance the hitch on one side the muller held up the other side, not bad for a diabled veteran now going on 69 in august (heart blew up in 91 on duty, triple by pass and a few ,3 attacks later I'still kicking) Now I got to finish cleaning up the trailer my son in law gave me, no body would buy it, I will send pictures in a few weeks of what should be impressive for a nice set, needed a lot of TLC and paint on the trailer that is now licensd for the first time in ten years since he bought it. It will be used for general purpose light duty by me only.
I am very happy going through e trailer, was consdering going through Uhaul saved my self saved aleast $100.00 and all the bull (electrical wiring not included) plus the waitting time they required about two weeks.



by:
2011 Chevrolet HHR

Install took a little longer than expected but overall it well worth it. I didn’t have access to a lift so I used car ramps.



by:
2008 Chevrolet HHR

Easy to install. But the shipping had some issues the box was a bit damaged the hitch was poking out of the box in a few places but at least you guys secured the wiring kit to the inside of the big box so it wouldn't fall out and the hitch wasn't damaged.



by:
2009 Chevrolet HHR

Awesome looking and a quality built hitch. Installed fairly easy with the detailed instructions and a short video clip by trailer. Wiring was easy as plug and go.


25
101
Show More Reviews

See what our Experts say about this CURT Trailer Hitch

  • Are Parts of Hitch Replacement Hardware Kit RHK Available Separately
    Hey Steve, the only way we can offer any of the hitch replacement parts we sell in the # RHK is with the entire RHK kit. We don't have a way to sell just the plates you mentioned as frustrating as that may sound.
    view full answer...
  • Trailer Hitch Receiver For 2011 Chevy HHR For Use With 2 Inch Bike Rack
    The only trailer hitch receiver for your 2011 Chevy HHR is indeed a Class I, 1-1/4 inch hitch, but what you may be able to do is use a 1-1/4 inch to 2 inch adapter. I say "may" because the use of an adapter will reduce the tongue weight capacity of the hitch by 50 percent; that means the most your bike rack and bikes can weigh is 100 lbs. If that's okay, what you will need is the following: - Curt Trailer Hitch Receiver # C11447 - Trailer Hitch Receiver Adapter 1-1/4" to 2" Hitch # e43YR -...
    view full answer...
  • Installation Time for a Hitch on a 2009 Chevrolet HHR
    For this particular installation I do not see a difference in the installation so I believe the difference is just in the amount of time the manufacturers stated at the time of engineering. The installation is essentially the same for all of the hitches (see link) offered for the 2009 Chevrolet HHR. I would allow a bit more time, maybe 1-1/2 hours, for the installation if working off of the ground without a lift.
    view full answer...
  • Parts Needed to Tow a Trailer with a 2006 Chevy HHR
    According to the owner's manual for the 2006 Chevy HHR the maximum towing capacity of the vehicle is 1,000 pounds. If you are able to get the weight down to that then you can tow a trailer using the following parts: Trailer hitch # C11447 Ball mount # C45520 2 Inch Ball # C40018 or 1-7/8 inch ball # C40001 Wiring harness # 118407
    view full answer...
  • Installation of Curt Trailer Hitch Receiver on a 2005 Saturn Ion
    The Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # C11447 is compatible with the 2006 - 2007 Saturn Ion Ion3 with 2.4L Engine and the 2004 - 2007 Saturn Ion Red Line. If you don't have the Red Line, the 2005 model won't fit with this hitch receiver. You will need to instead use the Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # C11115 which is compatible with 2003 - 2003 Saturn Ion, 2004 - 2005 Saturn Ion excluding Red Line, 2006 - 2007 Saturn Ion excluding...
    view full answer...
  • Trailer Hitch for a 2009 Chevy HHR SS to Use with Kuat Transfer Bike Rack
    I checked with Curt and trailer hitch # C11447 will fit your 2009 Chevy HHR SS model! You mentioned that you want to use the hitch for a bike rack. If you choose the Curt hitch then Curt also says you have to use stabilization strap # 18050 when using this hitch for any non-trailer load (such as a bike rack or cargo carrier) per their warranty requirements. If you don't want to have to use the strap then I recommend the Draw-Tite hitch, # 24756, because it does not require the use of the...
    view full answer...
  • Hitch Size that Fits 2011 Chevy HHR
    For your 2011 Chevy HHR there are only 1-1/4 inch hitches available like the Curt # C11447. The 2 inch hitch size is only available on higher capacity vehicles like trucks and SUVs. I attached an install video for this hitch for you to check out as well.
    view full answer...
  • Is Replacement Hardware Available for a CURT Trailer Hitch on a 2010 Chevy HHR
    You can order replacement hardware for the CURT Trailer hitch, # 11447. You will need part # RHK. Enter the hitch number in the box provided and select CURT as the manufacturer from the drop down menu. All the correct hardware for that hitch will then be gathered and sent to you. I have included a link to the installation details and a video showing a typical installation for you. Correct pricing is available on the product page.
    view full answer...
  • Recommended Hitch for a 2006 Saturn Ion
    We have just what you need. There are two options with negligible cost difference. The Curt Trailer Hitch Receiver, # C11115 that is confirmed to fit the 2006 Saturn Ion excluding Ion3 with 2.4L engine option. Or, the Curt Trailer Hitch Receiver, # C11447 for the the 2006 Saturn Ion Red Line and Ion3 equipped with a 2.4L engine. Both have equal specs of being a Class 1 hitch with a 1-1/4" receiver, maximum gross trailer weight of 2,000 lbs. and max tongue weight of 200 lbs. Both are...
    view full answer...
  • Curt Trailer Hitch for 2009 Chevy Cobalt to Use with Wheelchair Carrier
    For your 2009 Chevy Cobalt you will need either the Curt Class I Trailer Hitch # C11447 if you have the SS model or the Curt # C11430 if you do not. Both of the above Curt options for your Chevy Cobalt feature a 200 pound tongue weight capacity. This will work for your wheelchair carrier only if the combined weight of both the carrier itself and your wheelchair falls below this limit. I have attached the written installation instructions that you can check out as well.
    view full answer...
  • Differences Between Trailer Hitch Receivers for a 2008 Chevrolet HHR LT1
    The differences between the Draw-Tite # 24756 and the Curt # C11447 trailer hitches for your 2008 Chevrolet HHR are that the Draw-Tite has a welded tab that keeps you from using Class II trailer hitch rated accessories and it doesn't have a collar while the Curt doesn't have the welded tab and it does have a collar. The Curt also requires the use of a stabilizer strap # 18050 for all non-trailer accessories like a bike rack or cargo carrier. Attached are installation videos and instructions...
    view full answer...
  • Which Curt Trailer Hitch Fits a 2010 Chevy HHR
    Curt Trailer Hitch, # 11430, is designed to fit various years and models of the Chevy Cobalt coupe and sedan but not the Chevy HHR. For a 2010 Chevy HHR the correct Curt trailer hitch is # 11447. I have included links to the instructions and a video showing a typical installation for you. The hitch comes with the correct ball mount, hitch pin, and clip. If you plan on doing some towing you can use 1-7/8 inch ball # 19256 or 2 inch ball # 19258. For trailer wiring use # 118407. I have linked...
    view full answer...
  • Recommended Trailer Hitch Receiver For 2008 Chevy Cobalt LT 2 Door
    Your 2011 Chevy HHR has two trailer hitch receivers available which fit all trim levels of the HHR: the Draw-Tite # 24756 and the Curt # C11447. Neither of these two hitch receivers are confirmed to fit your 2008 Chevy Cobalt 2 Door LT. The correct receiver available for your vehicle is the Curt # C11430. I have attached an installation video for you. It is never recommended to use parts that are not designed specifically for your vehicle.
    view full answer...
  • Best Method To Haul 3 Or More Bikes On A 2011 Chevrolet HHR
    I do have an option that will allow you to carry more than two bikes on your 2011 Chevrolet HHR however, the Draw-Tite Sportframe Trailer Hitch Receiver part # 24756 and Curt Trailer Hitch Receiver part # C11447 are the only two hitch receivers available for your vehicle. As they are both a Class I hitch receivers, you will be limited to carrying two bikes on the rear of the vehicle with a hitch receiver per the manufacturer's. The most cost effective options would involve the use of...
    view full answer...
  • Recommended Trailer Hitch for 2011 Chevrolet HHR
    We carry all the major trailer hitch brands and according to our manufactures there is only a Class I trailer hitch available for your 2011 Chevrolet HHR LT Flex Fuel. I recommend the Draw-Tite # 24756 over the Curt # C11447 because Curt requires the use of a stabilization support strap # 18050 with any non-trailer load per their warranty. For a light weight bike rack that is compatible with the Class I hitch, I recommend the Thule Helium Pro # TH9042PRO. The Thule Helium # TH9042PRO...
    view full answer...
  • Ball Mount Recommendation to Clear the Back of a 2007 Chevy HHR
    If you were to use ball mount # C45014 on your 2007 Chevy HHR it would be very tight so I do recommend going with the longer # C45015. If you have or are looking at hitch # C11447 then the ball mount that Curt recommends is # C45520 which is about the same length as C45015 so it would also have enough length. For either ball mount if the trailer takes a 2 inch ball use # C40018. And if it takes a 1-7/8 inch ball use # C40001. And if you don't already have a trailer wiring harness you can...
    view full answer...
  • Will the Swagman XC 2-Bike Rack Fit a Bike with 34" Tall Top Tube
    I spoke with my contact at Swagman and they informed me that the Swagman XC 2-Bike Rack part # S64650 will work for you. You may need to switch the hooks around so that the long hook is on top but nonetheless it will work. There will also be no issues with the 26" diameter tires. This is a really nice cost effective bike rack. In order to mount the bike rack on your 2011 Chevrolet HHR I recommend the Curt Trailer Hitch Receiver part # C11447 which you mentioned. This hitch is a custom...
    view full answer...
    Image 1 for
  • Compatibility of Thule Trunk Mounted Bike Rack, Part # TH910 with 2009 Pontiac G5 with Spoiler
    Although the Thule Passage is a fit for the 2009 Pontiac G5, but this trunk mount rack could damage your spoiler. Thule has another option for your G5 Coupe that works with spoilers, the Thule OutWay # TH45JV. Another option would be to go with a hitch and a hitch mounted bike rack. I recommend the Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # C11447, which is a confirmed fit for your Coupe, and the Swagman 2 bike rack, part # S63360.
    view full answer...
  • How to Carry Ebike With 2006 Saturn Ion
    Hello Michael, I'm sorry to say that trunk-mounted bike racks do not have the capability of carrying an electric bike; their weight capacity is just too low, with the highest being 35 lbs like with the Thule Passage # TH910XT. The only possible way to carry an ebike on your 2006 Saturn Ion would be with a hitch and hitch-mounted bike rack. I know it's not what you wanted but I at least thought I'd throw out the option. For a hitch, the only fit requires your Ion to be the Red Line or...
    view full answer...
  • Does the Stabilizer Strap for a Curt Hitch on a 2011 HHR Need to be Used for a Single-Bike Bike Rack
    If you are wanting to install the Curt Trailer Hitch Receiver # C11447 on your 2011 Chevrolet HHR then a stabilizer strap like part # 18050 would need to be used according to Curt's warranty. The warranty simply says any non-trailer load so even a single bike rack would fall under that. With that being said, where you attach the strap doesn't matter at all. You could actually just loop it over the crossbeam of the RockyMounts HighNoon FC Solo Bike Rack # RKY87RR and then back to your vehicle...
    view full answer...
  • Availability of Replacement Hitch Install Hardware for 2010 Chevy HHR
    Hey Russ, we offer replacement for all of the hitches we offer with the part # RHK. You'd need to enter the part number for the hitch you need hardware for on it's product page and we'll ship you out the correct hardware. The part number for your hitch would be the # C11447.
    view full answer...
  • Hitch and Cargo Carrier for 2004 Saturn Ion
    The best hitch option for your 2004 Saturn Ion would be the Curt part # C11447 as it has the highest weight capacity rating at 200 lbs tongue weight. The lightest weight cargo carrier we offer that fits this hitch would be the Curt part # C18110 which weighs a total of 30 lbs. I believe your vehicle has a 100 lb tongue weight capacity which you should verify in your owner's manual but you'd need to stay under that capacity with the total of the 30 pound carrier and your scooter.
    view full answer...
  • How to Pick Out Trailer Hitch for 2006 Saturn Ion Coupe
    The hitch you'd need is the part # C11447 for if you have the Redline Ion3 with the 2.4 liter engine. If you have any other model you'd instead want the # C11115. Based on what you listed this sounds like the correct fit.
    view full answer...

Do you have a question about this Trailer Hitch?


Info for this part was:

Employee Zack K
Video Edited:
Zack K
Employee Joshua S
Video Edited:
Joshua S
Employee Lindsey S
Written by:
Lindsey S
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Shane T
Test Fit:
Shane T
Employee Alan C
Video by:
Alan C
Employee Wilson B
Updated by:
Wilson B
Employee Amanda M
Updated by:
Amanda M
Employee Kristina F
Updated by:
Kristina F
Employee Michael B
Updated by:
Michael B
Employee Isabelle B
Updated by:
Isabelle B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


<