Product Experts Available Now!
Call 1-800-940-8924
Kat's Heaters Engine Oil Dipstick Heater
(29 reviews)
Price: $63.02
In Stock
Need help with installation?
Locate installers near me- All Info
- Reviews (29)
- Q & A (0)
- Videos (1)
- Photos
Kats Heaters Oil Pan Heater - KH15200
- Heated Dipstick
- 90 Watts
- Kats Heaters
This heater can be placed temporarily in your dipstick opening to heat the oil and air inside the crankcase to keep the fluid from thickening. This provides better lubrication for a long-lasting, well-functioning engine.
Features:
- Dipstick heater temporarily replaces your dipstick to heat the oil and air inside the crankcase to ensure better lubrication in cold weather
- Warm oil provides better lubrication for a longer-lasting, better-functioning engine
- Stainless steel tubing allows for greater coverage in the case
- Plugs into standard 120-volt AC outlet
- Made in the USA
Specs:
- Application: dipstick openings that are 1/4" in diameter or larger
- Overall length: 24"
- Heating element length: 23"
- Wattage: 90 watts
- 1-Year limited warranty
Note: At least 5 inches of the heating element must be submerged in the oil.
15200 Kat's Heaters Engine Oil Dip Stick Heater
Video of Kat's Heaters Engine Oil Dipstick Heater
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Kat's Heaters Engine Oil Dipstick Heater Review
Speaker 1: Today, we're going to take a look at the Kat's Heaters Engine Oil Dipstick Heater. Now this dipstick heater will temporarily replace your dipstick to heat the oil and the air inside your engine crankcase, to ensure better lubrication in cold weather. The warm oil will help provide better lubrication for a longer lasting, better functioning engine.Now this is a nice semi flexible stainless steel tubing. Allows for greater coverage in the case. It will conform with most curves in the oil stick tubes. It is designed to plugin to a standard 120V AC outlet.
It is made in the USA. A few specs on this, this application is for dipstick openings that are about a 1/4 of an inch in diameter or larger. Now overall length on this, from the very end to the other end, not including the cord, probably looking right at 27". Now the cord length is going to be right about 10". And just the heating element length is going to be right at 23".
Wattage on this is 90 watts.And the nice thing I want to mention about this, now you do need to remember that at least 5" of this heating element needs to be submerged in the oil for it to work correctly. And then you're probably figuring well how are you going to know that Well what they do is this card that they send it on, if you'll notice they have this card and on it is . You take out your factory dipstick and you lay it down here and it shows you the 5" you need to show on your factory dipstick where it will say minimum oil level, you do want to make sure that it reaches that 5" oil level. So it's a very easy way to tell if this is going to work correctly for you. But that should do for the review on the Kat's Heater Engine Oil Dipstick Heater..
Customer Satisfaction Score:
92% were satisfied with this product
8% of customers were not satisfied
Ratings & Reviews
3.8
29 reviews
by:
Andrew
12/28/2017
The oil heater that goes in the dipstick works pretty well on my Toyota 4Runner but in trying to stick it in my Chrysler Town and Country with a 4.0, it broke. When I put in the year make and model of my van it said it was okay to use 15200 obviously it's not.
by:
Pat
02/07/2018
After reading the reviews, I ordered 4 on the hopes 2 would work. First, as per instruction, be sure they are submerged in at least 5 inches of oil. I had 6 .5 inches. My oil capacity is 8 quarts on an aircraft. This was my test on 3 units. Note cold engine ambient oil temp. (all tests were 40-50 degrees) Ran the heaters 1,2, 4 hours and overnight. Start the engine and note the time to reach 100 degrees. Times went from 9 to 11 minutes. Very little difference from no heater. Longer times oil could be heard bubbling and smelled burnt. A hair dryer after 4 hours only took 4 minutes. I'll be trying an external oil pan heaters next.
by:
Eloise
11/19/2025
The price was high $$
by:
Laken E.
02/22/2016
I've used this item before and it worked great. I haven't used this one yet because the outside temperature is in the 50's now. This item is made of stainless steel, so it will last for years without rusting or wearing through. It is long enough to fit my engine, and should fit just about any engine. I would not recommend for large diesel trucks. Plugs right into an extension cord, I recommend a power cord of at least 12 gauge under 25 feet. I am glad to fine this item can still be purchased.
by:
Christopher
01/06/2018
the dipstick heater is working perfect. the part was delivered in the snowstorm
could not have come at better time. single digit temperatures
I was having trouble starting car in morning Honda 2008 civic took in for service
they replace battery ,but i still had issues start in cold temperatures
(bug in starter I think) start was replace once already
but with the dipstick heater is its start right up.
I want to thank Kat's and etrailer.com
for great service getting part so quickly
could not have come at better time. single digit temperatures
I was having trouble starting car in morning Honda 2008 civic took in for service
they replace battery ,but i still had issues start in cold temperatures
(bug in starter I think) start was replace once already
but with the dipstick heater is its start right up.
I want to thank Kat's and etrailer.com
for great service getting part so quickly
by:
Tommy
12/27/2017
Nice job getting it to me in a couple of days. However, the dipstick heater does NOT work! It got stuck approximately halfway down to the oil pan and would not bend to negotiate a curve in the tube. When I plugged it in, the heater did not even get warm. I took off my glove to check. Nothing. When I went into my house to take a break, I found that the kitchen outlets did not work. The garage is on the same circuit, so the laughably poor product had tripped the breaker! Amazingly POOR PRODUCT!!
by:
Dean
01/05/2018
Rec'd in a timely manner. Fits my 2000 Ford Ranger. With hood fully closed. 6 cylinder. Next cold snap it will be tested. Cold snap by definition is -10 degrees or colder.
by:
Stan
01/25/2018
Good item for cold weather. Good communication & package sent promptly & safely!
by:
Monique
02/08/2022
just what he was expecting.
and took only 11 days.
i was curious to see where it crossed the border.
yesterday it was still in illinois and today at the door.
i,m not complaining!
we hope it will be enough to warm the oil in the garrett.
it shouldn,t hurt any.
thanks, m
and took only 11 days.
i was curious to see where it crossed the border.
yesterday it was still in illinois and today at the door.
i,m not complaining!
we hope it will be enough to warm the oil in the garrett.
it shouldn,t hurt any.
thanks, m
by:
Sam Y.
02/03/2017
Unless your dipstick tube goes strait down don't bother this thing WILL NOT BEND. Never was able to use it
by:
Richard
01/22/2019
Not flexible, put it in the dipstick tube and it bent and broke immediately.
by:
Robert
11/10/2020
Make a big difference in the winter time staring your car in the morning on very cold
by:
Camil
01/25/2022
Article bien reçu, mais un peu dispendieux. Bon service de livraison.
5 étoiles et non une seule. Très satisfait de mon achat en somme.
5 étoiles et non une seule. Très satisfait de mon achat en somme.
by:
Raymond B
10/12/2019
I t works great when the weather gets cold
by:
Jon
01/25/2018
Doesn't fit 01 Dodge Stratus. After I waited through a back order.
by:
John
01/25/2018
A+ product works great. Product was as described in listing.
by:
Ed
01/12/2017
Got 5 pieces of equipment Didn't fit on any and isn't flexible.
by:
Justin
02/27/2018
It quit working the first time I used it......Junk. Pure JUNK.
by:
John
01/26/2018
very good works well
by:
John W
02/05/2017
Will not go far enough in 35 hp big block Briggs engine
by:
Vincent
02/03/2023
Simple way to heat engine oil on sub-zero mornings,
by:
Gary
05/14/2020
very satisfied
by:
Sam
11/26/2024
Fast service!
by:
Larry
12/21/2022
Excellent service
by:
George
02/16/2024
25
29
true
Show More Reviews
See what our Experts say about this Kats Heaters Oil Pan Heater
- Can The Kat's Heaters Engine Oil Dipstick Heater KH15200 Be Left In The Vehicle After Heating?Hi Gilberto! The Kat's Heaters Engine Oil Dipstick Heater # KH15200 does indeed need to be removed after your oil is heated up. If you are wanting something that would stay installed, you will need to go a different way. We do have a bunch of potential options for that, but I will need to know the year, make, and model of your vehicle. The engine size will also be helpful.
view full answer... - Installation and Operation of Kat's Heaters Engine Oil Dipstick Heater KH15200The Kat's Heaters Engine Oil Dipstick Heater # KH15200 does not have a built-in thermostat since it is intended to be installed for a relatively brief period of time but not overnight or for extended periods the way a battery tender would be used. The dipstick heater will typically do its job in a matter of an hour or two. It is important to note that whenever the heater is in use it must have no less than 5-inches of its rod length immersed in the engine oil.
view full answer... - Will Kat's Heaters Engine Oil Dipstick Heater Work With 2021 Ram 2500 DieselHey Ron! I don't have the specific details for the engine on your 2021 Ram 1500 diesel so you will have to check a few things to make sure this fits. The Kat's Heaters Engine Oil Dipstick Heater # KH15200 requires dipstick openings that are 1/4" in diameter or larger, and you have to be able to submerge it in at least 5" of oil. As long as you meet these requirements you can use it on your Ram. Do you live up north or did you decide this would be a good idea with the cold winter and storms...
view full answer... - Can the Kat's Heaters Engine Oil Dipstick Heater Be Plugged in for 24 Hours? Hey Jeff. The Kat's Heaters Engine Oil Dipstick Heater item # KH15200 should not be run 24/7 or even 6-8 hours before you plan on using your tractor. It doesn't have a built in thermostat so that's way too long to leave this 90 watt heater plugged in and running. The Kat's Dipstick Heater item # KH15200 should be plugged in 1-2 hours before you plan on using your tractor even in well below freezing temperatures. You will want to make sure at least 5" of the dipstick is submersed in oil....
view full answer... - How to Measure if the Kats Heaters Engine Oil Dipstick can be Used on your EngineThe Kat's Heaters Engine Oil Dipstick Heater, part # KH15200, is designed to work with a variety of engines on the market. The only requirements are that the dipstick opening is 1/4" or larger and the heater stick can be submerged in at least 5" of oil. I was unable to find those specs on your current engine, but there is an easy way to find out if this will work for you. For the diameter of the opening, simply measure it (it will most likely be 1/4" or larger). For the 5"-minimum of...
view full answer... - Can Kat's Heaters Oil Dipstick Heater Be Used on Gas Generator An oil dipstick heater like the Kat's # KH15200 is a pretty universal product so as long as the dipstick opening on your generator is at least 1/4 inch in diameter and you will be able to submerge at least 5 inches of the heater in oil then it will work great. I have attached a short video review that you can check out as well.
view full answer... - Engine and Oil Heaters for 2017 Toyota PriusKat's Heaters confirms that for the 2017 Toyota Prius base model their frost plug heater # KH11813 is a confirmed fit. Their install instructions are linked for you and these note the installation location is in the block core hole at the center of the front of the engine. It is not necessary to drain coolant. Another way to warm your engine for easier starting is to use a dipstick-type oil heater # KH15200 that simply slides into your dipstick tube. This oil heater will work on pretty...
view full answer... - Can Kat's Engine Oil Dipstick Heater # KH15200 Be Cut to FitThe instructions for the Kat's Engine Oil Dipstick Heater # KH15200 say that the heater needs to be submerged in at least 5 inches of oil for it to work properly. Since there aren't any shorter dipstick heaters if there is some extra slack sticking out, it will still work just fine. If you cut the dipstick heater it will not work properly.
view full answer... - Engine Oil Heater for a 1997 Ford F- Series Pickup Truck with a 7.3L Diesel EngineThe Kat's Heaters Engine Oil Dipstick Heater part # KH15200 is a universal fit item that will work on a variety of different makes and models. There are only two requirements for the dipstick heater to work. The engine oil dipstick opening must be 1/4" in diameter or larger and at least 5 inches of the heating element must be submerged in the oil. The heating element on the above dipstick is 23" long. As most diesel truck engine's use a dipstick much longer than this, I recommend using...
view full answer... - Installation Location for Kat's Cartridge Style Block Heater KH11812 in 2014 Kia SportageI called a tech at Kat's for guidance and he advised that on the 2.4L engine you will want to use a receptacle on the rear side of the block that faces the firewall for installation of their Cartridge Style Block Heater # KH11812. There should be 5 plugs on the block; you want to use the one to the right (passenger-side) of the center. In other words, if you were counting the plugs from left to right this would be the fourth from the driver's side. I do have an alternate suggestion, using...
view full answer... - Recommended Engine Oil Heater for Grasshopper Mower with 36HP EngineWe offer several types of heaters you can use on your Grasshopper mower's 36hp engine. The pad type heaters like # KH24050 that attach to your oil (or transmission fluid) pan with 3M tape are one option, but for convenience I recommend a dipstick type engine oil heater # KH15200 which simply slips into the engine's dipstick receptacle. Unlike the pad heaters that require you to stow the cord after the unit is installed, the dipstick heater comes out completely when not in use and for me...
view full answer... - How to Determine if Heated Dispstick # KH15200 will Fit VehicleYou'd need to measure the length of your current dipstick to be sure but most likely the heated dipstick part # KH15200 that you referenced will work. The dipstick opening will need to be 1/4 inch in diameter and the length of this is 24 inches. The instructions for the Kat's Engine Oil Dipstick Heater # KH15200 say that the heater needs to be submerged in at least 5 inches of oil for it to work properly.
view full answer... - Recommended Oil Heater For A 2005 Subaru Outback 2.5Your best bet will be to go with the Kats Heaters Engine Oil Dipstick Heater # KH15200. We do not offer an immersion style heater that will work with your 2005 Subaru Outback. The Dipstick Heater, on the other hand, will be a great fit. Another option is to go with a magnetic heater like the Kat's Heaters Handi-Heat Magnetic Heater # KH1155. The heater itself is 3-5/8" long x 2-1/4" wide and can be attached to the oil pan.
view full answer... - Will Kats Heaters Engine Oil Dipstick Heater # KH15200 Flex Like Jeep DipstickThe Kat's Heaters Engine Oil Dipstick Heater # KH15200 is flexible like a standard dipstick so it would work for yours that has a slight bend in it. 5 inches of it need to be immersed in oil.
view full answer... - Recommended Engine Oil Heater for a 2007 GMC SierraI do have an option for you but Kat's does not make an Engine Oil Dipstick Heater like part # KH15200 long enough to work for your application. The above dipstick heater is for smaller vehicles and would not work well for your 2007 GMC Sierra. A better option for you would be to use a pad heater like the Kat's Heaters Heating Pad part # KH24150. The heating pad can be placed on either your vehicle's oil or transmission pan. The heater will be much more equipped for your truck as it is...
view full answer... - Engine Block Heater for a Takeuchi TL130 Skid Steer LoaderThe Kat's Engine Block Heater that you referenced fits multiple year models of Jaguar, Land Rover and some Jeep engines, but does not fit your Takeuchi TL130. You might be able to use inline circulating heater that is connected to the radiator hose. These heaters come in different hose sizes and lengths. You will need to measure the radiator hoses internal diameter and decide how much clearance you will have to mount the heater inline on the hose. Kat's also offers a dipstick heater #...
view full answer... - Can Kat's Heaters Engine Oil Dipstick Heater Be Submerged When Cold Yes, there's no problem with submerging the Kat's Heaters Engine Oil Dipstick Heater # KH15200 into the oil when it's still cold. I have included a video review on this unit below that you can also check out.
view full answer... - Engine Oil Heater for a 2006 Ford F-150The Kat's Heaters Engine Oil Dipstick Heater part # KH15200 is a universal fit oil heater that is designed to work on a variety of applications. We have not yet tested this heater on a 2006 Ford F-150 but as long as your dipstick tube is 1/4" in diameter or larger and at least 5" of the 24" dipstick is submerged in oil, then this heater will work well for you. A better option would be to use a pad heater like the Kat's Heaters Heating Pad part # KH26150 which is compatible with almost...
view full answer... - Installation Requirements & Power Draw of Kat's Heaters Dipstick Engine Oil Heater KH15200The Kat's Heaters Dipstick Engine Oil Heater # KH15200 has a 23-inch heating element and no less than 5-inches of it must be immersed in your engine oil to avoid overheating and damage to the heater. I confirmed this with my contact at Kat's Heaters. I also confirmed that this unit draws 90-watts and fits into dipstick openings that are 1/4-inch in diameter or larger.
view full answer... - Engine Heaters for 2015 Toyota Camry Hybrid 2.4L XLEThe Kat's Heaters Engine Block Heater # KH11813 is intended for use in the 3.5L V6 and 2.5L inline 4-cylinder engines offered in the 2015 Camry, including the hybrid XLE. The other type of heater you can use for your transmission or engine oil pans is their # KH24500 which is a pad-type heater that measures 8-1/2 long x 5-1/2 wide. It attaches to the underside of your vehicle's oil or transmission pan with included 3M tape. We also offer a dipstick-type oil heater # KH15200 which is easy...
view full answer... - Recommended Engine Oil Heater for 2015 Toyota VenzaToyota discontinued the Venza in 2015 so your car would have to be a 2015, not a 2016. Kat's does not show a confirmed fit for a block style engine heater for the 3.5L, but you can use their dipstick style heater # KH15200 which is the easiest possible option for any vehicle with an oil dipstick tube of 1/4-inch diameter or larger. This works in any such engine that allows for at least 5-inches of the heating element to be immersed in the oil. The best part of using this type of heater...
view full answer... - What Happens if Kats Heaters Engine Oil Dipstick Heater Has Less Than 5 Submerged In OilIf at least 5" of the Kat's Heaters Engine Oil Dipstick Heater # KH15200 isn't submerged in oil it's possible that the unit could be damaged from overheating. This is essentially because it needs enough fluid to properly dissipate its heat. The actual heating element measures 23" long and is designed to fit dipstick openings that are at least 1/4" in diameter. I have attached a short video review on this product below that you can check out as well.
view full answer... - Heated Dipstick Fit Recommendation for 2007 Nissan XterraI looked up the length of the factory dipstick of your 2007 Nissan Xterra and found it to be right at 21 inches. The only heated dipstick we have is the part # KH15200 which is 23 inches long. Which will work as you want the heated dipstick to be submerged by at least 5 inches. With a longer dipstick this will be easier achieved and this one will fit and work well.
view full answer... - Will The Kats Heaters Engine Oil Dipstick Heater Work On My 2008 Jeep Grand CherokeeThe Kat's Heaters Engine Oil Dipstick Heater, part # KH15200, will not fit your 2008 Jeep Grand Cherokee. I spoke with a representative from Kat's Heaters and he confirmed that it is only 24" in length. He also said that since your oil dipstick has to go around a bend to get to the oil, even if it were long enough, it will not work because the oil dipstick heater is straight and cannot be bent.
view full answer...
Do you have a question about this Oil Pan Heater?
Info for this part was:
Written by:
Lindsey S
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Installed by:
Jeff D
Updated by:
Shelly K
Updated by:
Wilson B
Updated by:
Michael B
Updated by:
Noah M
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.