Place this heating pad under your oil or transmission pan to keep the fluid from thickening in the winter. Warm fluids lubricate better for a long-lasting, well-functioning machine. Measures 2" wide x 5" long. Has a grounded 3-prong plug.
Features:
Specs:
Average Customer Rating: 4.8 out of 5 stars (73 Customer Reviews)
Place this heating pad under your oil or transmission pan to keep the fluid from thickening in the winter. Warm fluids lubricate better for a long-lasting, well-functioning machine. Measures 2" wide x 5" long. Has a grounded 3-prong plug.
The product is what I ordered. I was limited on smooth contact area to mount it. So, if functions as designed. I wish I could have installed a larger higher output unit for my application. Thanks for checking in. Have a great weekend.
[Thumbs up]
I’ve purchased these heaters in the past and they work well. Buying from etrailer was trouble free.
Small, but works as expected for its si ze
just got it but should help with what i got it for. nice sticky backing.
I put this heater on my RV water heater to prevent it from freezing. So far it works well.
I used this through a winter in the north where it regularly is at subzero temperatures. Truck always started without any issues. I also had heat pads on the oil pan and transmission that I bought from etrailer. At -40+ degrees the truck always started relatively easy.
Website was easy to use and shipping was quick!
Article conforme a la description.
Was disappointed. Their product description along with the installation instructions both refer to "self adhesive" but there is none. Called manufacture and they suggested High temp silicone RTV. Do to the location of installation this was difficult to do the clamping. Added 4 days for 2 people to the process to install.
Works as advertised
Works great
Great Product! Volkswagen Jetta TDI makes no electrical heaters. There is NO frost plug on the engine either! Installed the KAT and life is good! Starts every time.
Roger in North Dakota.
Installation was a snap as my generator was still hot from running. Peeled off the liner to expose the adhesive and stuck it squarely and securely on the underside of the oil pan. My review is only 4 stars because I haven't yet put the product to the test, but when that happens I will revisit and revise my review. Otherwise the heater arrived quickly and was as described.
I bought this pad heater for my air compressor that lives in the unheated side of my shop. I ruined two electric motors due to the oil in the compressor turning to molasses during the winter where it gets well below zero. So far so good. :)
The adhesive is solid, not peeling and the pad keeps my compressor nice and toasty. Before when I was away traveling I would forget to open the breaker for the compressor and come home to a ruined motor. That problem is history.
I highly recomend this heater, very small but very effective for oil pans of all types needing to be kept warm in freezing condition.
I own and operate a tree service in MI, needless to say the winter months are hard on our equipment. I had searched for quit some time before I found this product, it was a very easy installation and makes a world of difference, I would highly recommend this to anyone who works in the cold weather. Thank you Kats !!!
We use it on the oil pan of our sprinter fleet. We run in subzero temps a couple times a year and this works great for us when our fleet has to sit outside overnight. Great product just make sure to research the size you need for your application.
Used it to keep oil warm on my GENERAC generator for easier starting during winter months but the electrical connections on the heater were so poor that they were arcing and sparking like July 4th fireworks!! So I ripped it off, too unsafe.
So far so good. Bought 3 for our diesels. Be sure to clean the oil pan for any dust, grime or grease. We even lightly sanded the oil pan to ensure good adhesion then used high temp RTV silicone around the edges.
Just received heater today.
Looks like it should be perfect for the oil pan installation on my Kubota diesel UTV.
Hope to do a after season review next spring.
Works awesome! This is the second one, the first burned out after two years. We use them on 4 wheelers in the winter, on timers for 2 hrs twice a day. Put on lower crank case to warm oil...starts much easier. This one still working well after 1 year.
I installed this on a DEF tank in my diesel to keep it from freezing when I’m parked overnight in sub zero temps. I ran the cord along the frame rail as far as it would reach then attached an extension cord and routed that to come out in the same area as my block heater plug. Be sure to clean the surface of whatever you’re attaching the pad to in order to get good adhesion.
Using heaters to warm up batteries on an electric drag racing car for cool weather racing. Batteries make more power when warm. The heaters work great!
Quality. I hope it works as well as it looks! Will install soon.
I attached it to my air compressor to warm the oil before I start it when it's cold. Works well. I plug it in about 1 hour before using the compressor.
This is the second Kats engine heater I have purchased and both are good quality and durable. This is also the second purchase I have made at eTrailer.com and I am totally satisfied with the cost, the no charge shipping, fast delivery and great follow up to make sure my order was correct and was delivered. I will definitely order from eTraler.com again should I need a component or a part.
Do you have a question about this Oil Pan Heater?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.