1. Front Hitch
  2. Curt
  3. Front Mount Hitch
  4. 500 lbs Vert Load
  5. 9000 lbs Line Pull
  6. 2 Inch Hitch
Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2"
Save up to 60% off All Curt Trailer Hitches

Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2"

Item # 31322
lowest price pledge
Retail:$234.05
Our Price: $117.96
After Instant Rebate
Front Hitch

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

This item qualifies for Free Shipping
Shipping Weight: 38 lbs
Quantity: 
In Stock
Curt Custom Fit Hitch - 31322
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Easily attach a variety of accessories to the front of your vehicle with this corrosion-resistant trailer hitch receiver. Perfect for winches, spare tire carriers and more. Call 800-298-8924 to order Curt front hitch part number 31322 or order online at etrailer.com. Free expert support on all Curt products. Guaranteed Lowest Price and Fastest Shipping for Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2". Front Hitch reviews from real customers.
  • All Info
  • Reviews (48)
  • Q & A (25)
  • Videos (3)
  • Photos
  • Why etrailer?

Curt Front Hitch - 31322

  • Curt
  • Front Mount Hitch
  • 500 lbs Vert Load
  • 9000 lbs Line Pull
  • 2 Inch Hitch
  • Custom Fit Hitch
  • Square Tube

Easily attach a variety of accessories to the front of your vehicle with this corrosion-resistant trailer hitch receiver. Perfect for winches, spare tire carriers and more.


Features:

  • Front-mount hitch provides attachment point for hitch-mounted accessories
    • Winch, spare tire carrier, snowplow, cargo carrier and more
    • No more blindly backing trailer in - just hook it up and drive it forward
  • Custom fit is designed specifically for your vehicle
  • Easy, bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at etrailer.com
  • Gloss black powder coat finish over steel resists corrosion
  • Sturdy, square-tube design
  • Assembled in USA


Specs:

  • Line pull: 9,000 lbs
  • Vertical load: 500 lbs
  • Gross trailer weight: 5,000 lbs
  • Receiver opening: 2" x 2"
  • Pin hole diameter: 5/8"
  • Limited lifetime warranty


etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.



31322 Curt Front-Mount Trailer Hitch Receiver

Installation Details 31322 Installation instructions

This Product Fits The Following Vehicles




Video of Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2"

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Front Mount Trailer Hitch Installation - 2011 GMC Sierra

Today on our 2011 GMC Sierra we're going to take a look at and also show you how to install the Curt Custom Fit Front Mount Trailer Hitch Receiver with the 2" by 2" opening. Part number is 31322. Here's a good look at our hitch once we get it installed, as you can see you're not losing really anything here. Our ground clearance is going to remain just about the same, the hitch is going to remain just about completely hidden up here behind our bumper. Great thing about the install process, it uses all the factory mounting locations so we don't have to drill any holes, you don't have to make any modifications to our truck. It's going to leave us with our 2" by 2" receiver tube opening. These are going to work out really, really well for front mounted winches, for your snow plows, some people will put a cargo carrier on the front, a bike rack on the front, if they need to maximize their carrying capacity, so it's going to be pretty versatile.

It's a 2" by 2" receiver tube opening, that's going to work with all your class III accessories, even ball mounts you can put them in here, secure them with a pin and clip, and then you could kind of maneuver trailers around the yard or something like that. To secure all of our items in place, the hitch does use a 5/8 diameter pin hole. This pin hole, we'll use the class III rated accessories for, but you can see there's plenty of room here whether you want to use a locking type of device, locking hitch pin clip, or just a standard pin and clip, we should have no problems getting that secured. We've got three weight ratings on our hitch, the first is going to be the tongue weight rating and that's the maximum downward force that we can put here at the receiver tube opening, that's going to be 500-lbs. The gross trailer weight rating which is the total weight of our trailer and anything that we we're to load up on it is 5,000-lbs. The hitch is going to offer a straight line pull capacity of 9,000-lbs. That would mean if you had a winch connected here, and you anchored that off, and you we're pulling your truck, you wouldn't want to exceed that 9,000-lb mark which is going to be plenty enough to get our truck out of most situations.

If we need to, we can always double back to our tow hook here to increase that capacity. A couple measurements that will be helpful in selecting the right product for your hitch will be from the ground to the inside top edge of the receiver tube opening we've got about 11-1/2". Then from the center of our hitch pin hole to the outermost edge of our bumper, it's going to be about 6". Now, to begin our installation we need to remove the four bolts that are located right here. This is our driver's side frame rail, our tow hook's right there just for reference. You can see we've got two here, these nuts you need a 21mm to remove. Just below those we're going to use an 18mm socket.

You may have to throw a wrench on the other side there just to keep that nut from spinning. Now we'll pull that bolt out. What we're going to do is place that smaller bolt that goes back there through our bracket and put two washers on it. We want our bracket to have the notch towards the front and to be stepped in towards the middle of the vehicle. I'm going to place those on, I'm going to get that very loosely started for now because I've got two more washers that need to go on the longer bolt, which is in that location. We'll put our two nuts back on there.

We're going to get these down so our plate still has some wiggle room there, and then we'll put the nut on the backside of that larger bolt also. We do want it to be able to move around a little bit so when we get our center section put in we'll be able to do that. Then we just need to repeat the same process on the other side here. One thing to keep in mind on the passenger side is that we're not going to have that lower bolt location closer to the rear of the vehicle, so we've just got three. Now we'll want to slide our washers on our lower bolt there, and then we can put our bracket right up in position and re-secure it with the nuts. Now we want to take our short carriage bolts, those are going to go from the inside toward the outside. We're going to place them right up in those brackets that we installed. Got some little flange nuts there that thread on just to kind of help hold its position. Once we have two of those installed loosely on each side, we can get our other six started. To get our rear bolt in position, what we'll do is take our bolt leader, we're going to go right up through that bracket, and I'm going to add on two flat washers, and then also our oval hole spacer. That's to make up that gap that we've got underneath the frame rail there. Just going to get those slid into position, and now we'll turn our bolt leader out, that should allow us to bring it out of this round hole that's right in the middle of this cross-member. Once we've got it out, we want to slide on our spacer block and also thread on our carriage bolt. You 00:05:28 want to get those fed into the hole separately there and we can bring it on over. Once we've got that down through, we'll pull our fish wire off, then we want to thread on our flange nut just like that. Now we'll go through and start snugging down all of our hardware. Once we've got it all snug then we'll switch over to our torque wrench and torque it all down to the specifications listed in the instructions. Now we're ready to trim out this lower air dam. You may or may not have to do it depending on your style of truck. What I'm going to do is just mark on either side of the receiver there, and I'm going to make my mark inside of where I want to cut, so I'm going to cut down the outside of that line so I don't leave any residual paint there. Then we're going to go right up to the bottom of the plate, so we'll cut straight down those lines and we'll be removing this inside section, all the way up to that line. With our opening trimmed out, that's going to complete our installation of the Curt Front Mount Trailer Hitch Receiver, part number 31322 on our 2011 GMC Sierra.


Customer Reviews

Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2" - 31322

Average Customer Rating:  4.8 out of 5 stars   (48 Customer Reviews)

Easily attach a variety of accessories to the front of your vehicle with this corrosion-resistant trailer hitch receiver. Perfect for winches, spare tire carriers and more.

- 31322
by:

Awesome got it last night and went ahead and install! Till 2am it looks great and it works perfect! 750065



- 31322
by:

Hitch was easy to install, all necessary parts included and clear instructions. Solved my problem backing up a hill around a curve making it easy to park a 24 foot travel trailer. Have purchased from etrailer several times and always satisfied. 482375



- 31322
by:

A great product that’s extremely well built and it fit perfectly on my truck, The installation was a breeze. 583047



- 31322
by:
2008 Chevrolet Silverado 1500

This trailer hitch receiver is a little challenging attaching to my 2008 GMC 1500. The two sides attached just fine with the factory bolts, but the rear center support didn't line up with the attachment hole in the frame. Of course this last attachment point requires fishing a bolt and washer through the hollow frame, which was easier than expected. However, I had to use two clamps to push the receiver into place which made it challenging fishing the bolt into place and lining up the required washers. The receiver itself is solidly built. 478324



- 31322
by:
2012 Chevrolet Silverado

Love doing business with e-trailer. The website is wonderfully designed to help you find products, watch easy-to-understand installation videos, talk to a live, friendly, helpful person and buy online or over the phone. I bought a 'front mount trailer hitch' for the price listed on the website (which was much cheaper than I could find anywhere), got free shipping, received in a couple of days, and installed in a couple of hours (thanks to the e-trailer video). This is my from-now-on, "go-to company" for everything trailer related. Thanks Crystal (with e-trailer) 503884



- 31322
by:
2013 Chevrolet Silverado

The hitch came packaged in a double box. The outer box had some damage but the hitch did not. I read the instructions, making sure i had the correct tools, and jacked my truck up. The install took three hours as i was layiing on my back with simple hand tools. The parts all fit and i am happy with the outcome. Good price, simple instructions, good fit. 461097


Comments
It worked out great, I use a winch, and can move it to the front or rear as needed.
Peter - 12/18/2018

46833

- 31322
by:
Chevrolet

Beauty install. Just had to trim a 2x2inch slot in the air dam under the bumper. Didn't have to touch the facia. You can hardly see the receiver. No drilling!!! 449676



- 31322
by:
2008 Chevrolet Silverado

Installation took longer than stated. Total of 1 hour. Instructions were simple. Recommend watching the installation video. One drawback. The bumper dropped by a 1/4 inch during installation. Overall it is a good product. 238831



- 31322
by:
Chevrolet

installed my 07 new body chevy outside will snowing. if i had not watched the install video,i'd been in trouble. All went great-better than expected at 63yrs old ,30 deg. 45min to install, next comes cargo carrier/winch.couldn't be more satisfied with ease of install! would recommend--thanks etrailer-coffee time now 476634



- 31322
by:
Chevrolet Silverado

Ordered for mounting a winch on the front of my Silverado. Free shipping was appreciated and quite fast. Received it in 3 business days because of my location. Instructions were included and simple. Product was well protected and packaged great. Installation went as well as expected. I had slight alignment difficulty due to a deer committing suicide via my truck this past fall, but that wasn’t the products fault. Took me just over an hour total from setting up to tearing down. Good quality bolts make for ease of mind. Overall highly recommend. Great company. Even followed up with an email to make sure everything was good. Will purchase from then again when needed. 770692



- 31322
by:

I bought this hitch so I can move my travel trailer better and also to use my bike rack more efficiently. I am going to have my garage install it since I do not have an impact wench to turn the bolts. So I hope this some help Phil 767921



- 31322
by:

It does exactly what I need it to do. It is a receiver for my snow plow. 724873



- 31322
by:
2011 Chevrolet Silverado

Easy to install. Works excellent for backing my pontoon into the shed. Also use it for my bike rack. Witch allows me to enter the truck box without removing the bike's 703150



- 31322
by:

Great looking hitch, installation was a piece of cake. The only thing I had to think about was routing the bolt through the frame . I would definitely tell people to buy this product 629300



- 31322
by:

I purchased a SnowSport 180 from Etrailer and a Curt 2" front mount insert from Etrailer. Everyone and everything concerning these events was excellent and so are the products. I COULDN'T BE MORE SATISFIED! 610775


Comments
Just fine.
Charlie - 03/10/2020

70999

- 31322
by:

Ordering the 31322 front hitch was very simple and the delivery was fast. I received it in two days. I will use this for a DR Redi Plow. I watched the video and it was very informative. I was able to install it myself on my truck in just a couple hours, pretty good for a 70 year old guy. I'm very happy with it and would recommend it to anyone needing a front hitch. 600343



- 31322
by:

This is the second products I have purchased I was very pleased with the first one I have yet to install this one but it looks just as good very well Built thank you 579619



- 31322
by:
2011 GMC Sierra

Mounted the hitch to my 2011 GMC to move my 18 ft Lowe boat in my backyard. Make this move a snap. Could see all around and I can put the boat in the exact location the first time. 560667



- 31322
by:
2012 GMC Sierra

Service was great, hitch fits with a little coaxing but the time estimate was kind of funny. I couldn't get my truck on jack stands in the time suggested! Overall your service was great!7_ 519455



- 31322
by:
2012 Chevrolet Silverado

Excellent 518213



- 31322
by:
2008 Chevrolet Silverado

Product fit as advertised, assembly took approx 1 hr. 500871



- 31322
by:
2008 GMC Sierra

I ordered both the front and rear Curt class 3 hitches for my 2008 Gm sierra. The factory rear hitch had rusted from the inside and had split all the way across. This new hitch is a lot more heavy duty , with thicker metal and the ends are sealed to keep water out. I liked it so much , I ordered this front hitch to use our bicycle rack on front when we pull our camper . Did not know how to carry our bikes until I ran across this hitch on Trailer. I think it will solve our problem . Thanks etrailer !!! Also had best price, got free shipping, prompt service, and excellent customer service !! Will definitely order from them again !!! 475471



- 31322
by:

Fits great, and was installed (by a pro) in about 30 minutes as promised. At its lowest point it protrudes below the front valance by less than 1/2" so those parking lot concrete stops arent a problem. 469708



- 31322
by:

Good solid American made product, Good price (I couldn't build it for that) Instructions where good, hour installation w/air tools, shipping was fast and free, all hardware was there (nothing missing). I would order again and would recommend. 469421


Comments
All good
Perry - 01/25/2019

48881

- 31322
by:

Dear etrailer , I am very pleased with my plow assembly for our truck.Thank you for great service,delivery & product. A satisfied customer once again. Sincerely Randy Noble 459186


28
53
Show More Reviews

Ask the Experts about this Curt Front Hitch

  • Difference Between Curt Hitch # 31322 and Draw Tite Hitch # 65052
    Both the Curt Front Hitch part # 31322 and the Draw Tite part # 65052 are a fit for the 2011 GMC Sierra 1500. They have similar prices, similar capacities and will give you a hitch opening in about the same location. Biggest difference is they are made by different brands and use different parts of the vehicle to mount the side brackets. Since the Draw Tite is totally welded and does not have any sections that are bolted together it would be what I would go with.
    view full answer...
  • Distance From Center of Hitch Pin Hole To Bumper on CURT Front Mount Trailer Hitch # 31322
    I contacted our representative at CURT about the CURT Front Mount Trailer Hitch # 31322. He informed me that the distance from the center of the hitch pin hole, to the front edge of the bumper measures approximately 7 inches. We do not have a Hidden Hitch front mount hitch available for the 2011 Silverado, but we do have a Draw-Tite model, part # 65052. The Draw-Tite hitch distance should be near the same distance as the CURT hitch as it will sit near the same location. When using...
    view full answer...
  • Can Curt Front Hitch # 31322 Install on 2013 Chevy Silverado with Lift Kit
    Adding a lift kit should not affect fit of Curt trailer hitch # 31322 on your 2013 Chevy Silverado unless the devices used to lift the truck occupy any space needed by the hitch or any of the attachment points on the frame needed by the hitch. I have included a link to the installation details for this front mount hitch so you can determine if there would be any fit issues.
    view full answer...
  • Front Mount Trailer Hitch for a 2012 Chevy Silverado 3500HD Diesel
    The Curt hitch # 31322 is for 1500 models and will not fit a 3500HD. For your 2012 Chevy Silverado 3500HD diesel take a look at # C31023. I have included a link to the installation instructions as well as a video that shows a typical installation for you.
    view full answer...
  • Will the Fisher MM2 Snowplow Mounting Brackets Work With a Front Mount Hitch Receiver
    I do have an option that will allow you to attach a snowplow to the front of your 2010 Chevy Silverado 1500 but the Curt Front Mount Trailer Hitch Receiver part # 31322 will not work with the Fisher MM2 Mount Kit as they both occupy the same space on the frame rails. For a snowplow that will work well with a 2" front mount trailer hitch receiver and your Chevy Silverado 1500, I recommend using the Detail K2 Avalanche Snowplow part # K2AVAL8219. The Detail K2 Avalanche has an 82" wide...
    view full answer...
  • Recommended Front Mount Hitch for 2015 GMC Sierra 1500 Crew Cab
    I do have an option for you, however the Curt Front Mount Hitch Receiver # 31322 referenced in your question is not confirmed to fit your 2015 GMC Sierra. This particular hitch is designed for earlier models of the Sierra 1500 (2008-2013) and will not fit with the frame on your 2015 model. If you have the Sierra 1500, I instead recommend the Curt Front Mount Hitch # C31069. This hitch is confirmed to fit your truck and it features a simple, bolt-on installation. It has a line pull rating...
    view full answer...
  • Does Fascia Need To Be Trimmed When Installing Curt Front Hitch # 31322 On 2008 Chevy Silverado Z71
    The instructions for installing the Curt 2 Inch Front Hitch # 31322 on a 2008 Chevrolet Silverado 1500 Z71 does say that you will need to trim the fascia as needed. You will install the side plates of the hitch to the vehicles frame rails. Then, you will attach the hitch crossmember to the side plates on the vehicle. This will show you where the fascia will need to be trimmed to gain access to the hitch receiver tube. I am including a link to the installation instructions for the Curt...
    view full answer...
  • Front-Mount Hitch Installation on 2013 Chevrolet Silverado 1500
    We do offer two front-mount 2-inch hitches for your 2013 Chevrolet Silverado 1500 including the Curt # 31322 that you referenced. We have an installation video showing a 2007 Silverado that you can see by clicking on the included link. Also the written instructions are linked for you at right. Installation requires removal of the air dam, if present, but Curt does not specify that it requires trimming, although this may be an option if you'd rather not remove it entirely. All required...
    view full answer...
  • Front Mount Hitch Receiver and Winch Mount for a 2006 Ford F-350 4x4
    Curt front receiver # 31322 is designed for certain GM trucks so for your 2006 Ford F-350 4x4 it will not fit but you can use # 65022. I have included a link to a video showing an example installation for you. We have several hitch mounted winch plates such as # BDW20011 or # C31010 that may work for you depending on the mounting hole pattern for your winch. I have included a link to the options but please note not all of them are hitch mount options.
    view full answer...
  • Trimming Front Fascia/Air Dam to Install Front Mount Trailer Hitch on a 2011 Chevy Silverado 1500
    The instructions for installing the Curt 2 Inch Front Hitch # 31322, see link, on a 2011 Chevrolet Silverado 1500 do say that you will need to trim the fascia as needed. First, you will install the side plates of the hitch to the vehicles frame rails. Then attach the hitch crossmember to the side plates on the truck. This will show you where the fascia will need to be trimmed to gain access to the hitch receiver tube. The instructions do not show where the fascia has to be trimmed because...
    view full answer...
  • Does Curt Front Hitch # 31332 Fit 2012 GMC Sierra 1/2 Ton
    Yes, the Curt front hitch part # 31322 that you referenced is a confirmed fit for your 2012 GMC Sierra 1/2 ton with 4 wheel drive. I attached an install video for this for you to check out as well.
    view full answer...
  • Weight of Curt Front Hitch 31322
    The Curt hitch part # 31322 that you referenced weighs 38 lbs.
    view full answer...
  • Curt Front Mount Trailer Hitch Installation for a 2011 GMC Sierra 1500
    For installation of Curt front mount trailer hitch # 31322 you may or may not need to use the washers on the driver's or passenger's side attachment points. If there was enough of a gap between the side mounting brackets and the cross member of the hitch then you would use them. The square piece you mentioned is a block used to prevent that center carriage bolt from spinning when tightening the nut. It is possible it won't be needed but the only way to know is to fishwire the bolt through...
    view full answer...
  • How To Mount a SnowBear ProShovel SnowPlow On a 2009 Chevy Silverado 1500
    The SnowBear ProShovel SnowPlow mounts using a standard 2" receiver tube according to my research therefore in order to use this on a 2009 Chevrolet Silverado 1500 you only need the Curt Front Mount Trailer Hitch Receiver part # 31322 which is a drill free option that can be used for several other purposes when you are not plowing such as helping back-up a trailer, mounting a winch, etc. If your SnowBear SnowPlow does not mount using a standard 2" receiver tube then please re-verify...
    view full answer...
  • Curt Front Hitch for 2009 Chevy 3500 HD 4x4
    There is a Curt front mount hitch that will work on your 2009 Chevy Silverado, but the Curt Hitch # 31322 that you referenced is only for 1500 model trucks. You would want a Curt Front Hitch # 31109. I attached installation instructions and an install video for this product for you to check out also. This hitch has a 500 lb vertical load limit so it should do well to carry a generator and cargo carrier as long as the combined weight is less than that. To see all of the cargo carriers...
    view full answer...
  • How to Determine the Right Ball Mount to Tow a Trailer Level with a 2012 Chevy Silverado
    All you need is a ball mount with the right amount of drop to tow the trailer level. To determine the amount of drop you will need there are some measurements that you will need to take. First make sure the truck and trailer are on level ground when taking the measurements. You will measure from the ground to the top of the receiver opening on the hitch on your 2012 Chevy Silverado. Next measure from the ground to the bottom of the trailer coupler with the trailer level and on level...
    view full answer...
  • Front-Mount Trailer Hitch for 2013 Chevrolet Silverado 1500
    Yes, the front-mount trailer hitch receiver you referenced, Draw-Tite # 65052, is a confirmed fit for your 2013 Chevrolet Silverado 1500. We do in fact offer another comparably-rated front hitch for your truck, the Curt # 31322. Both hitches install using included hardware, both will require a bit of trimming of the front fascia, and neither one requires any drilling. For reference I have linked an installation video for the Curt hitch as well as written installation instructions and...
    view full answer...
  • Recommended Front Hitch for a 2008 GMC 1500 4x4 that Provides the Most Clearance
    Currently, 2 front mount hitches fit your 2008 GMC 1500 4x4. They are the Curt # 31322 and Draw-Tite # 65052. Both have a 500 pound vertical pull and 9,000 pound line pull. The specifications on the Draw-Tite hitch # 65052 from the top of the mounting brackets to the bottom of the receiver hitch is 7-3/4 inches. See diagram I included. You will need to measure down from the bottom of your frame 7-3/4 inches and from that point measure to the ground to obtain your clearance amount. Curt...
    view full answer...
  • Will Curt Front Mount Hitch part 31109 Fit a 2009 Chevy Silverado
    This hitch will fit a 2009 GMC or Chevy 2500 or 3500 pickup. If you have a 1500, you would use part # 31322 or 65052.
    view full answer...
  • Front-Mounted Hitch Receivers for 2011 GMC Sierra 1500
    Curt front-mount hitch receiver # C31023 fits only 2500 and 3500 series Sierras but we do have two front hitches for your 2011 GMC Sierra 1500, part # 65052 from Draw-Tite and part # 31322 from Curt. Both 2-inch hitches are rated for 500-lbs of vertical load (tongue weight) and for a 9000-lb line pull. There are no higher-rated front hitches for your truck.
    view full answer...
  • Bull Bar and Front Hitch Recommendation for a 2012 Chevy Silverado 1500
    Surprisingly the Bull Bar by Westin # 32-2275 would be compatible with the Front Hitch part # 31322 on your 2012 Chevy Silverado. The hitch installs under the front of the vehicle and attaches to the outside of the frame rails and the Bull Bar installs by inserting into the frame rail and goes through the front fascia of the truck so they would both fit together. For lights could use the # 09-0105.
    view full answer...
  • Front Hitch Availability for the 2011 Chevy Silverado 1500
    The only front mount hitches that are available or your 2011 Chevy Silverado 1500 are ones that locate the hitch opening below the front bumper of the truck like the Curt Hitch part # 31322 or the Draw Tite Hitch part # 65052. Often times the lower hitches are preferred for people looking to plow snow like with the K2 # K2AVAL8219.
    view full answer...
  • Front Trailer Hitch Recommendation for 2012 GMC Sierra Denali 1500
    Yes, we can offer you two choices in a front-mount hitch receiver for your 2012 GMC Sierra Denali 1500. Both products, the Curt # 31322 and Draw-Tite # 65052, install without drilling and include all required mounting hardware. They also share identical capacities. It will be necessary to do some trimming of the front fascia to make room for the receiver tube on either hitch. A helpful installation video and article are linked for you.
    view full answer...
  • Front Mount Trailer Hitch Receiver for a 2011 GMC Sierra 1500 Quad Cab Short Bed
    We have 2 front mount receivers that will fit your 2011 GMC Sierra 1500. You can use either Curt hitch # 31322 or Draw-Tite hitch # 65052. I have linked instructions for both hitches and a video installation of the Curt hitch for you.
    view full answer...
  • Comparing Mounting Bracket and Retrofit Kit for SnowBear Snow Plow on 2011 Chevy Silverado 1500
    I reached out to SnowBear about getting an instruction manual and was told that they are not made available, but the rep was helpful in approximation about how long it will take to install the Custom Mounting Bracket Kit # SB397-002 or Retrofit Kit # SB324-120 and Curt Front Mount Trailer Hitch Receiver # 31322 on your 2011 Chevy Silverado 1500. Their exact response was: "Our organization does not share installation instructions for the mount kits. What I can say is that the mounts...
    view full answer...

Do you have a question about this Front Hitch?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality front hitch for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate front hitch information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Written by:
Lindsey S
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Reno H
Expert Research:
Jameson C
Expert Research:
John H
Video Edited:
Joshua S
Video Edited:
Kathleen M
Updated by:
Adele M
Updated by:
Kristina F
Updated by:
Isabelle B
Test Fit:
Randy B
Test Fit:
Brent H

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 800-298-8924