Recommended Front Hitch for a 2008 GMC 1500 4x4 that Provides the Most Clearance
Updated 04/02/2015 | Published 04/01/2015 >
Products Featured in This Question
Question:
I am looking for a front hitch for my 2008 GMC 1500 4x4. I see that you have hitches made by both Curt and Reese. Do you have a picture of either of these installed on a similar truck? I think both of these are going to lower my ground clearance, do you know which one will have the reduce the clearance the least? Thanks
asked by: Neil L
Expert Reply:
Currently, 2 front mount hitches fit your 2008 GMC 1500 4x4. They are the Curt # 31322 and Draw-Tite # 65052. Both have a 500 pound vertical pull and 9,000 pound line pull.
The specifications on the Draw-Tite hitch # 65052 from the top of the mounting brackets to the bottom of the receiver hitch is 7-3/4 inches. See diagram I included. You will need to measure down from the bottom of your frame 7-3/4 inches and from that point measure to the ground to obtain your clearance amount.
Curt # 31322 will have a ground clearance of 9-3/4 inches from the ground to the bottom side of the receiver. See the picture I included. If you have bigger tires other than stock, the measurement will increase a bit.
Both of these hitches require a little trimming of the front fascia.
I added a helpful article for you too about hitch installations and a installation video for the Curt # 31322. It's a very similar installation to your 2008 GMC 1500.
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Front Mount Hitch
- Shop: Lippert Quick Drop RV Stabilizer Jack - Double Leg - 23" Lift - 500 lbs Per Leg
- Shop: Trailer Hitch
- Shop: Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2"
- Video: Review of Lippert Camper Jacks - Stabilizer Jack Double Leg - LC68DK
- Video: How to Install: Curt Front Mount Trailer Hitch Receiver on your 2011 GMC Sierra
- Shop: etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class I - 1-1/4"
- Article: My Trailer Hitch Doesn't Fit
- Shop: Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2"
- Video: A Closer Look at the Stabilizer Jack
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class IV - 2"
- Shop: Stabilizer Jacks - 6-1/4" Drop Leg Travel - 18" - 650 lbs - Qty 2
- Shop: EcoHitch Hidden Front Mount Trailer Hitch Receiver - Custom Fit - 2"
- Video: DIY Install: Curt Front Mount Trailer Hitch Receiver on your 2012 Chevrolet Silverado
- Shop: Grille Guard
- Video: How to Install: Curt Front Mount Trailer Hitch Receiver on your 2008 GMC Yukon
- Q&A: Front Mount Hitch for a 2013 Jeep Grand Cherokee for a Snowplow
- Q&A: Front Trailer Hitch Receiver Options For 2010 Chevrolet Silverado 1500
- Q&A: Distance From Center of Hitch Pin Hole To Bumper on CURT Front Mount Trailer Hitch # 31322
- Q&A: Front Hitch Availability for the 2011 Chevy Silverado 1500
- Q&A: Front Mount Trailer Hitch Receiver for a 2011 GMC Sierra 1500 Quad Cab Short Bed
- Q&A: Front-Mount Hitch Installation on 2013 Chevrolet Silverado 1500
- Q&A: Trimming Front Fascia/Air Dam to Install Front Mount Trailer Hitch on a 2011 Chevy Silverado 1500
- Search Results: trailer hitch
- Article: Trailer Wiring Diagrams
- Video: Firestone Ride-Rite Air Bags with Easy Mount Compressor Feature Breakdown
- Search Results: trailer wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Trailer Wiring
- Video: How to Choose a Trailer Brake Controller



