bing tracking image
  1. Front Receiver Hitch
  2. CURT
  3. Front Mount Hitch
  4. Custom Fit Hitch
  5. 500 lbs Vert Load
  6. 9000 lbs Line Pull
Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2"

Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2"

Item # 31322
Retail:$348.95
Our Price: $181.93
You Save: $167.02
Front Receiver Hitch

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

This item qualifies for Free Shipping
Shipping Weight: 38 lbs
Quantity: 
In Stock
Front Receiver Hitch 31322 - 9000 lbs Line Pull - CURT
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Easily attach a variety of accessories to the front of your vehicle with this corrosion-resistant trailer hitch receiver. Perfect for winches, spare tire carriers and more. 1-800-940-8924 to order CURT front receiver hitch part number 31322 or order online at etrailer.com. Free expert support on all CURT products. Great prices and Fastest Shipping for Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2". Front Receiver Hitch reviews from real customers.
  • All Info
  • Reviews (82)
  • Q & A (0)
  • Photos
  • Why etrailer?

CURT Front Receiver Hitch - 31322

  • Front Mount Hitch
  • CURT
  • Custom Fit Hitch
  • 500 lbs Vert Load
  • 9000 lbs Line Pull
  • 2 Inch Hitch
  • Square Tube

Easily attach a variety of accessories to the front of your vehicle with this corrosion-resistant trailer hitch receiver. Perfect for winches, spare tire carriers and more.


Features:

  • Front-mount hitch provides attachment point for hitch-mounted accessories
    • Winch, spare tire carrier, snowplow, cargo carrier and more
    • No more blindly backing trailer in - just hook it up and drive it forward
  • Custom fit is designed specifically for your vehicle
  • Easy, bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at etrailer.com
  • Gloss black powder coat finish over steel resists corrosion
  • Sturdy, square-tube design
  • Assembled in USA


Specs:

  • Line pull: 9,000 lbs
  • Vertical load: 500 lbs
  • Gross trailer weight: 5,000 lbs
  • Receiver opening: 2" x 2"
  • Pin hole diameter: 5/8"
  • Limited lifetime warranty


etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.



31322 Curt Front-Mount Trailer Hitch Receiver

Installation Details 31322 Installation instructions

This Product Fits The Following Vehicles




Customer Satisfaction Score:


Customer Reviews

Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2" - 31322

Average Customer Rating:  4.7 out of 5 stars   (82 Customer Reviews)

Easily attach a variety of accessories to the front of your vehicle with this corrosion-resistant trailer hitch receiver. Perfect for winches, spare tire carriers and more.

by:

High quality product. Good instructions and all the necessary parts. Had to buy a 21mm socket and use a racket strap to pull stabilizing bar back a little to reach hole in frame but no big deal.


Comments
After a season of plowing snow in Alaska my hitch is as good as new. It’s a lighter duty plow don’t still went through some abuse this last winter. No regrets on my purchase.
Dan - 05/07/2022


by:

Worked well with snowplow




by:

Seems to be well made but was disappointed in two areas. I'm glad etrailer had a video of the install because the directions provided were very vague. The other issue was the bolt hole on the bracket that bolted to my crossmember didn't line up. I had to take the receiver back off the truck and elongate the hole in the receiver.




by:
2013 Chevrolet Silverado

The hitch came packaged in a double box. The outer box had some damage but the hitch did not.
I read the instructions, making sure i had the correct tools, and jacked my truck up.
The install took three hours as i was layiing on my back with simple hand tools.
The parts all fit and i am happy with the outcome. Good price, simple instructions, good fit.


Comments
It worked out great, I use a winch, and can move it to the front or rear as needed.
Peter - 12/18/2018


by:

This will not fit a Sierra GMC 1500 in Denali Trim. Had to pay $xx to return. Disappointed in etrailer and the listing should be updated.




by:
2009 Chevrolet Silverado

I bought the Curt front hitch for the purpose to haul my Honda Generator on the Torklift Lock and Load in front of my 2009 Chevy Silverado. The installation is self explanatory, but I still watched the video provided by e-trailer, and it made it that much easier to put in. Especially by myself. It works perfectly for the purpose I bought it for.




by:
2012 Chevrolet Silverado

This product fit my needs perfectly. I purchased this hitch to mount a bicycle rack to the front of my pickup truck as I did not want to add weight to the back of my camp trailer on the flimsy bumper that is standard, and did not want to spend a fortune on a hitch that needed drilled or welded to my camp trailer. I looked at several options, and this appeared to be the best choice. With the video instructions and an hour of time, I had this hitch installed and bicycle rack in place. This product was relatively easy to install, and will suit my needs very well. Thank you etrailer!




by:
2011 GMC Sierra

The questions that you answer about what truck you have do not get all the way to the correct model. So then when you scroll through the available products, it is showing products for different models that dont apply to your truck(like the 1500, 2500, 3500 etc). However, you dont realize this as you just finished putting in the inputs for your vehicles and then of course assume that the list they give you of available products would only include your vehicle since they say "confirmed fit" for your model. They sent me the hitch for the gmc sierra 1500, which does not fit my 2500 GMC and then want me to pay the $50 to send it back. It seems like the designers of the website should have finished the job before they went to lunch. Now I am out the money.


Comments
I will have our customer service department reach out to you.
-- Etrailer Expert Jenny N - 11/08/2021


by:
Chevrolet Silverado

Ordered for mounting a winch on the front of my Silverado.
Free shipping was appreciated and quite fast. Received it in 3 business days because of my location.
Instructions were included and simple.
Product was well protected and packaged great.
Installation went as well as expected. I had slight alignment difficulty due to a deer committing suicide via my truck this past fall, but that wasn’t the products fault. Took me just over an hour total from setting up to tearing down.
Good quality bolts make for ease of mind.

Overall highly recommend. Great company. Even followed up with an email to make sure everything was good.
Will purchase from then again when needed.




by:

Bought this hitch to add a plow to my 1/2ton truck the hitch was delivered with two of the same mounting brackets (passenger side) contacted them about problem and they said we will ship you the right bracket… bracket showed up and it had looked like it was dropped and slid across the pavement with multiple scratches and chips out of the paint. Not the happiest with the product since it’s not even on the truck yet. Over all the hitch it self is built well just horrible handling of products!




by:
2011 Chevrolet Silverado

Almost easy to install, for some reason alignment was difficult with the small bolts. Still not bad. Very happy overall.




by:

etrailer was awesome as usual. I did have an issue with the product (Curt) having an incorrect part (two right side brackets, no right side bracket) which prevented installation of the receiver, Spoke with Dave at etrailer who initiated a fix for the problem right away. Cudos to Dave and etrailer but one star for Curt.




by:
Chevrolet

Beauty install. Just had to trim a 2x2inch slot in the air dam under the bumper. Didn't have to touch the facia. You can hardly see the receiver.
No drilling!!!




by:

I bought this hitch so I can move my travel trailer better and also to use my bike rack more efficiently. I am going to have my garage install it since I do not have an impact wench to turn the bolts. So I hope this some help Phil


Comments
I use the front hitch to transport more than two bikes It is easy to install and load the bikes on.
Philip D - 03/22/2021


by:

Good solid American made product, Good price (I couldn't build it for that) Instructions where good, hour installation w/air tools, shipping was fast and free, all hardware was there (nothing missing). I would order again and would recommend.


Comments
All good
Perry - 01/25/2019


by:
2010 Chevrolet Silverado

Curt Front Trailer Hitch arrived quite fast.
The
hitch is very sturdy and attaches to the sturdy tow hooks.
The instructional video was very helpful especially for the step where you "fish" a bolt through the front frame rail. Turned out to be simple with the included fishwire. The video was for a 2007 Silverado but it was exactly the same as for my 2010 1500 Silverado.
Best installed with a helper at one point on a lift, but I installed it by myself using a pair of wheel ramps, a creeper, and a small hydraulic jack to lift the hitch into place for fitting and installation.

Why install a front hitch? When maneuvering a trailer in tight quarters, it is hard to do it with the trailer connected to the back of the tow vehicle. You have to keep straight which way to turn the steering wheel and the trailer's turning is slow to respond so you often turn too far and have to start over. With the trailer attached to the front of the vehicle, you can push the trailer into a tight place easily since the trailer responds immediately to steering changes. And, you can easily and immediately see the changes to the trailer's path. And you can also pull the trailer out of a tight path easily.

I grew up on a farm always pulling and pushing trailers into exact spots. I quickly found how great a front end hitch is for maneuvering.




by:
2008 GMC Sierra

I ordered both the front and rear Curt class 3 hitches for my 2008 Gm sierra. The factory rear hitch had rusted from the inside and had split all the way across. This new hitch is a lot more heavy duty , with thicker metal and the ends are sealed to keep water out. I liked it so much , I ordered this front hitch to use our bicycle rack on front when we pull our camper . Did not know how to carry our bikes until I ran across this hitch on Trailer. I think it will solve our problem . Thanks etrailer !!! Also had best price, got free shipping, prompt service, and excellent customer service !! Will definitely order from them again !!!




by:
2008 Chevrolet Silverado 1500

This trailer hitch receiver is a little challenging attaching to my 2008 GMC 1500. The two sides attached just fine with the factory bolts, but the rear center support didn't line up with the attachment hole in the frame. Of course this last attachment point requires fishing a bolt and washer through the hollow frame, which was easier than expected. However, I had to use two clamps to push the receiver into place which made it challenging fishing the bolt into place and lining up the required washers. The receiver itself is solidly built.




by:

Hitch was easy to install, all necessary parts included and clear instructions. Solved my problem backing up a hill around a curve making it easy to park a 24 foot travel trailer.
Have purchased from etrailer several times and always satisfied.




by:
2008 GMC Sierra

Fit between the mounting brackets on my 2008 GMC Sierra 1500 4x4 was a little tight but it bolted up just fine.
Looks very well made.
I removed the lower front air dam ( I didn't like it anyway) & it fit perfectly underneath the bumper & license plate mount.

Will be using the front hitch skid shield with this.


Comments
FYI: The air dam is there to help with aerodynamics on the underside of the truck. In short, it helps make the truck more fuel efficient. No harm in removing it if you dont mind burning a bit more fuel.
-- comment by: Grant i - 10/22/2014


by:

Easy install




by:
2011 GMC Sierra

This is an excellent product and bolted right on to my 2011 GMC Sierra 1500 Crew Cab 4X4. I will be using it as a mount for my Badlands ZXR12000 winch and remove the winch when not in use. I did watch the installation video but waited a couple weeks until I got around to installing the hitch. The one thing I messed up on was when I pulled the captured bolt through the lower crossmember. I ripped the spring wire off of it before I had fed it through the mounting hole in the tongue at the rear and I had a hell of a time trying to trick that bolt into falling down through the washers and tongue so that I could mount the nut. I ended up having to wrap the end of the spring wire around a smaller bolt very tightly to make a "helicoil-style" end like the one that came from the factory that I had ruined when I jerked the wire off. I then fed it up through the bottom and threaded it onto the end of the captured mounting bolt in the cross-member and then had a way to physically pull and guide the bolt through the washers and out of the bottom so that I could mount the retaining nut. This was my own fault for not paying close enough attention to the installation video. Now that it's finished, it looks like a factory accessory and holds my front winch perfectly.




by:
2007 Chevrolet Silverado New Body

Hitch was packaged perfectly. Arrived sooner than expected. Installation went smooth. Around 60 minutes. Etrailer did an outstanding job keeping me informed on order pick up and shipping. Thank you for such great service.




by:

I purchased a SnowSport 180 from Etrailer and a Curt 2" front mount insert from Etrailer. Everyone and everything concerning these events was excellent and so are the products. I COULDN'T BE MORE SATISFIED!


Comments
Just fine.
Charlie - 03/10/2020


by:

Very stout hitch with nice, thick paint job. Will do the job very well. The only thing I'd change about the hitch is how far back the receiver is. It's slightly UNDER the bumper, so I had to find my longest drawbar to make the ball clear the front of the truck. I'd rather it stuck out several inches farther forward.
I also needed two deep-set sockets to get this install done: a 21mm and an 18mm. Regular sockets were not deep enough to go over the bolts to get to the nuts. I'd also recommend having a breaker bar handy. The factory torqued a couple of bolts down incredibly tight. Because of this the install took me a couple of hours, not the 60 minutes the instructions said.



25
81
Show More Reviews

See what our Experts say about this CURT Front Receiver Hitch

  • Does Fascia Need To Be Trimmed When Installing Curt Front Hitch # 31322 On 2008 Chevy Silverado Z71
    The instructions for installing the Curt 2 Inch Front Hitch # 31322 on a 2008 Chevrolet Silverado 1500 Z71 does say that you will need to trim the fascia as needed. You will install the side plates of the hitch to the vehicles frame rails. Then, you will attach the hitch crossmember to the side plates on the vehicle. This will show you where the fascia will need to be trimmed to gain access to the hitch receiver tube. I am including a link to the installation instructions for the Curt...
    view full answer...
  • Trimming Front Fascia/Air Dam to Install Front Mount Trailer Hitch on a 2011 Chevy Silverado 1500
    The instructions for installing the Curt 2 Inch Front Hitch # 31322, see link, on a 2011 Chevrolet Silverado 1500 do say that you will need to trim the fascia as needed. First, you will install the side plates of the hitch to the vehicles frame rails. Then attach the hitch crossmember to the side plates on the truck. This will show you where the fascia will need to be trimmed to gain access to the hitch receiver tube. The instructions do not show where the fascia has to be trimmed because...
    view full answer...
  • Curt Front Mount Trailer Hitch Installation for a 2011 GMC Sierra 1500
    For installation of Curt front mount trailer hitch # 31322 you may or may not need to use the washers on the driver's or passenger's side attachment points. If there was enough of a gap between the side mounting brackets and the cross member of the hitch then you would use them. The square piece you mentioned is a block used to prevent that center carriage bolt from spinning when tightening the nut. It is possible it won't be needed but the only way to know is to fishwire the bolt through...
    view full answer...
  • Weight of Curt Front Hitch 31322
    The Curt hitch part # 31322 that you referenced weighs 38 lbs.
    view full answer...
  • Curt Front Hitch for 2009 Chevy 3500 HD 4x4
    There is a Curt front mount hitch that will work on your 2009 Chevy Silverado, but the Curt Hitch # 31322 that you referenced is only for 1500 model trucks. You would want a Curt Front Hitch # 31109. I attached installation instructions and an install video for this product for you to check out also. This hitch has a 500 lb vertical load limit so it should do well to carry a generator and cargo carrier as long as the combined weight is less than that. To see all of the cargo carriers...
    view full answer...
  • How to Determine the Right Ball Mount to Tow a Trailer Level with a 2012 Chevy Silverado
    All you need is a ball mount with the right amount of drop to tow the trailer level. To determine the amount of drop you will need there are some measurements that you will need to take. First make sure the truck and trailer are on level ground when taking the measurements. You will measure from the ground to the top of the receiver opening on the hitch on your 2012 Chevy Silverado. Next measure from the ground to the bottom of the trailer coupler with the trailer level and on level ground....
    view full answer...
  • Front-Mount Hitch Installation on 2013 Chevrolet Silverado 1500
    We do offer two front-mount 2-inch hitches for your 2013 Chevrolet Silverado 1500 including the Curt # 31322 that you referenced. We have an installation video showing a 2007 Silverado that you can see by clicking on the included link. Also the written instructions are linked for you at right. Installation requires removal of the air dam, if present, but Curt does not specify that it requires trimming, although this may be an option if you'd rather not remove it entirely. All required...
    view full answer...
  • Does Curt Front Hitch # 31332 Fit 2012 GMC Sierra 1/2 Ton
    Yes, the Curt front hitch part # 31322 that you referenced is a confirmed fit for your 2012 GMC Sierra 1/2 ton with 4 wheel drive. I attached an install video for this for you to check out as well.
    view full answer...
  • Can Curt Front Hitch # 31322 Install on 2013 Chevy Silverado with Lift Kit
    Adding a lift kit should not affect fit of Curt trailer hitch # 31322 on your 2013 Chevy Silverado unless the devices used to lift the truck occupy any space needed by the hitch or any of the attachment points on the frame needed by the hitch. I have included a link to the installation details for this front mount hitch so you can determine if there would be any fit issues.
    view full answer...
  • How To Mount a SnowBear ProShovel SnowPlow On a 2009 Chevy Silverado 1500
    The SnowBear ProShovel SnowPlow mounts using a standard 2" receiver tube according to my research therefore in order to use this on a 2009 Chevrolet Silverado 1500 you only need the Curt Front Mount Trailer Hitch Receiver part # 31322 which is a drill free option that can be used for several other purposes when you are not plowing such as helping back-up a trailer, mounting a winch, etc. If your SnowBear SnowPlow does not mount using a standard 2" receiver tube then please re-verify the model.
    view full answer...
  • Front Mount Hitch for 2013 Chevy Silverado 1500 Without Trimming Air Dam
    Curt Front Hitch # 31322 works on your 2013 Chevy Silverado 1500. Modifying the air dam is usually required to get front mount hitches installed on most vehicles. We don't have any other options for your truck that won't require trimming. The air dam is made out of plastic and can be easily removed or trimmed to work with the hitch. The front air dam can very with model. I have also attached a video to help you with determining where the hitch sits on your truck and how to get it installed.
    view full answer...
  • How To Install The Curt 31322 Front Mount Hitch Receiver On 2007 GMC Sierra 1500 New Body
    The Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2" # 31322 is custom-made and is confirmed to fit your 2007 GMC Sierra new body style. This is not made to be installed upside-down or reversed in any manner. You may think the 4 bracket bolts could be removed and would allow the receiver to be flipped, and then reinstall the 4 bolts to the brackets. But this won't work as you would not have clearance for your bumper cover; and more importantly the rear bracket/tongue will not fit...
    view full answer...
  • Distance From Center of Hitch Pin Hole To Bumper on CURT Front Mount Trailer Hitch # 31322
    I contacted our representative at CURT about the CURT Front Mount Trailer Hitch # 31322. He informed me that the distance from the center of the hitch pin hole, to the front edge of the bumper measures approximately 7 inches. We do not have a Hidden Hitch front mount hitch available for the 2011 Silverado, but we do have a Draw-Tite model, part # 65052. The Draw-Tite hitch distance should be near the same distance as the CURT hitch as it will sit near the same location. When using any...
    view full answer...
    Image 1 for
  • Difference Between Curt Hitch # 31322 and Draw Tite Hitch # 65052
    Both the Curt Front Hitch part # 31322 and the Draw Tite part # 65052 are a fit for the 2011 GMC Sierra 1500. They have similar prices, similar capacities and will give you a hitch opening in about the same location. Biggest difference is they are made by different brands and use different parts of the vehicle to mount the side brackets. Since the Draw Tite is totally welded and does not have any sections that are bolted together it would be what I would go with.
    view full answer...
  • Front-Mount Trailer Hitch for 2013 Chevrolet Silverado 1500
    Yes, the front-mount trailer hitch receiver you referenced, Draw-Tite # 65052, is a confirmed fit for your 2013 Chevrolet Silverado 1500. We do in fact offer another comparably-rated front hitch for your truck, the Curt # 31322. Both hitches install using included hardware, both will require a bit of trimming of the front fascia, and neither one requires any drilling. For reference I have linked an installation video for the Curt hitch as well as written installation instructions and...
    view full answer...
  • Recommended Front Hitch for a 2008 GMC 1500 4x4 that Provides the Most Clearance
    Currently, 2 front mount hitches fit your 2008 GMC 1500 4x4. They are the Curt # 31322 and Draw-Tite # 65052. Both have a 500 pound vertical pull and 9,000 pound line pull. The specifications on the Draw-Tite hitch # 65052 from the top of the mounting brackets to the bottom of the receiver hitch is 7-3/4 inches. See diagram I included. You will need to measure down from the bottom of your frame 7-3/4 inches and from that point measure to the ground to obtain your clearance amount. Curt...
    view full answer...
    Image 1 for Image 2 for
  • Front Trailer Hitch Recommendation for 2012 GMC Sierra Denali 1500
    Yes, we can offer you two choices in a front-mount hitch receiver for your 2012 GMC Sierra Denali 1500. Both products, the Curt # 31322 and Draw-Tite # 65052, install without drilling and include all required mounting hardware. They also share identical capacities. It will be necessary to do some trimming of the front fascia to make room for the receiver tube on either hitch. A helpful installation video and article are linked for you.
    view full answer...
  • Front Mount Receiver Hitch for 2007 GMC Sierra
    We do indeed offer a front receiver for your truck. Perhaps the confusion comes in because 2007 was a split model year for the GM 1500 trucks. GMC had a 2007 Sierra Classic which was identical to the 2006 model as well as what was referred to as the 2007 GMC Sierra New Body which was an all new body style. If you had the 2007 Sierra Classic, I'd recommend the Draw-Tite # 65028 front mounted receiver. If you have the 2007 Sierra New Body, use the Curt # 31322 front mount receiver. I've...
    view full answer...
  • Front receiver hitch for 2007 Chevy Silverado 2500 HD
    We have Front Mount Trailer Hitch Receivers from Draw-Tite # 65050, and from Curt # 31109 that both have a max vertical weight limit of 500 lbs. This is max rating I have been able identify from our suppliers. I do not find a custom bolt on front mount with a limit in excess of 600 lbs.
    view full answer...
  • Front Trailer Hitch Receiver Options For 2010 Chevrolet Silverado 1500
    The Curt Front Mount Trailer Hitch Receiver # 31322 and Draw-Tite Front Mount Trailer Hitch Receiver # 65052 are the 2 options available for a front mounted receiver on your 2010 Chevrolet Silverado 1500. Both of these receivers will sit below the bumper and have identical load ratings of 500lbs tongue weight, 5,000lbs trailer capacity and 9,000lbs line pull. The main difference is in the construction of the 2 parts and where they mount to the frame. The Draw-Tite # 65052 is all welded...
    view full answer...
  • Weight Of Curt And Draw-Tite Front Mounted Hitches For 2013 Chevy Silverado 1500
    The Curt Front Mount Trailer Hitch Receiver # 31322 weighs approximately 38lbs. The Draw-Tite Front Mount Trailer Hitch Receiver # 65052 weighs approximately 40lbs.
    view full answer...
  • Will Curt Front Mount Hitch part 31109 Fit a 2009 Chevy Silverado
    This hitch will fit a 2009 GMC or Chevy 2500 or 3500 pickup. If you have a 1500, you would use part # 31322 or 65052.
    view full answer...
  • Front Mount Trailer Hitch for a 2012 Chevy Silverado 3500HD Diesel
    The Curt hitch # 31322 is for 1500 models and will not fit a 3500HD. For your 2012 Chevy Silverado 3500HD diesel take a look at # C31023. I have included a link to the installation instructions as well as a video that shows a typical installation for you.
    view full answer...
  • Bull Bar and Front Hitch Recommendation for a 2012 Chevy Silverado 1500
    Surprisingly the Bull Bar by Westin # 32-2275 would be compatible with the Front Hitch part # 31322 on your 2012 Chevy Silverado. The hitch installs under the front of the vehicle and attaches to the outside of the frame rails and the Bull Bar installs by inserting into the frame rail and goes through the front fascia of the truck so they would both fit together.
    view full answer...
    Image 1 for Image 2 for


< Previous
12



Do you have a question about this Front Receiver Hitch?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate front receiver hitch information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jeff D
Expert Research:
Jeff D
Employee Reno H
Expert Research:
Reno H
Employee Jameson C
Expert Research:
Jameson C
Employee John H
Expert Research:
John H
Employee Lindsey S
Written by:
Lindsey S
Employee Joshua S
Video Edited:
Joshua S
Employee Kathleen M
Video Edited:
Kathleen M
Employee Adele M
Updated by:
Adele M
Employee Wilson B
Updated by:
Wilson B
Employee Kristina F
Updated by:
Kristina F
Employee Isabelle B
Updated by:
Isabelle B
Employee Randy B
Test Fit:
Randy B
Employee Brent H
Test Fit:
Brent H

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924