Distance From Center of Hitch Pin Hole To Bumper on CURT Front Mount Trailer Hitch # 31322

Question

Question:

I want to know what the distance is from the hitch pin hole to the edge of the bumper and how much it varies from the hidden hitch on a 2011 chevy silverado 1500 FRONT HITCH. Please help!

asked by: Nicole R

0

Expert Reply:

I contacted our representative at CURT about the CURT Front Mount Trailer Hitch # 31322. He informed me that the distance from the center of the hitch pin hole, to the front edge of the bumper measures approximately 7 inches.

We do not have a Hidden Hitch front mount hitch available for the 2011 Silverado, but we do have a Draw-Tite model, part # 65052. The Draw-Tite hitch distance should be near the same distance as the CURT hitch as it will sit near the same location.

When using any hitch accessory, you will want to check the measurement on the product page for the distance from the hitch pin hole to the edge of the accessory. You will need to use accessories that have 7 inches or more of clearance, to clear your front bumper.

I have linked instructions for the Curt Front Mount Trailer Hitch # 31322. Also attached is a picture from CURT showing the hitch installed on a 2011 GM truck.

expert reply by: Reno H

0

click to enlarge

Answer 1

I reached out to a representative of Draw-Tite who explained that the front mount trailer hitch #65052 that fits your 2014 Chevy Suburban LTZ will require trimming "up to the bottom of the bumper fascia" and sent the accompanying photo…

view full answer...

Answer 2

The instructions for installing the Curt 2 Inch Front Hitch #31322, see link, on a 2011 Chevrolet Silverado 1500 do say that you will need to trim the fascia as needed. First, you will install the side plates of the hitch to the vehicles frame rails.…

view full answer...

Answer 3

Curt front mount trailer hitch #C31033 will fit your 2013 Jeep Grand Cherokee as long as the vehicle does not have factory tow hooks. There are no options if it does have factory tow hooks. Though we have heard of at least one customer who had a…

view full answer...

Answer 4

Currently, 2 front mount hitches fit your 2008 GMC 1500 4x4. They are the Curt #31322 and Draw-Tite #65052. Both have a 500 pound vertical pull and 9,000 pound line pull. The specifications on the Draw-Tite hitch #65052 from the top of the mounting…

view full answer...

Answer 5

Both the Curt Front Hitch part #31322 and the Draw Tite part #65052 are a fit for the 2011 GMC Sierra 1500. They have similar prices, similar capacities and will give you a hitch opening in about the same location. Biggest difference is they are made…

view full answer...

Answer 6

There are only two options for front mounted hitches for your 2011 Chevy Silverado 1500. They are the Curt Front Hitch item #31322 and the Draw-Tite item #65052. Both of these hitches stick out below the front bumper and can not be adapted to go…

view full answer...

Answer 7

The only front mount hitches that are available or your 2011 Chevy Silverado 1500 are ones that locate the hitch opening below the front bumper of the truck like the Curt Hitch part #31322 or the Draw Tite Hitch part #65052. Often times the lower…

view full answer...

Answer 8

We have 2 front mount receivers that will fit your 2011 GMC Sierra 1500. You can use either Curt hitch #31322 or Draw-Tite hitch #65052. I have linked instructions for both hitches and a video installation of the Curt hitch for you.

view full answer...

Answer 9

We do offer two front-mount 2-inch hitches for your 2013 Chevrolet Silverado 1500 including the Curt #31322 that you referenced. We have an installation video showing a 2007 Silverado that you can see by clicking on the included link. Also the…

view full answer...

Answer 10

We do have front hitches for your 2011 GMC Sierra 1500 but the etrailer item #e98849 is not one and it will not fit on both the front and rear of your truck. Instead you will want the Curt Front Mount Trailer Hitch Receiver item #31322. This front…

view full answer...

Answer 11

The Curt Front Mount Trailer Hitch Receiver #31322 and Draw-Tite Front Mount Trailer Hitch Receiver #65052 are the 2 options available for a front mounted receiver on your 2010 Chevrolet Silverado 1500. Both of these receivers will sit below the…

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Distance From Center of Hitch Pin Hole To Bumper on CURT Front Mount Trailer Hitch # 31322

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching