Difference Between Curt Hitch # 31322 and Draw Tite Hitch # 65052

Question

Question:

Whats the differences between #31322 and #65052? They have equal capacity ratings.

asked by: Dan R

0

Expert Reply:

Both the Curt Front Hitch part # 31322 and the Draw Tite part # 65052 are a fit for the 2011 GMC Sierra 1500. They have similar prices, similar capacities and will give you a hitch opening in about the same location.

Biggest difference is they are made by different brands and use different parts of the vehicle to mount the side brackets.

Since the Draw Tite is totally welded and does not have any sections that are bolted together it would be what I would go with.

expert reply by: Jameson C

0

Answer 1

We have 2 front mount receivers that will fit your 2011 GMC Sierra 1500. You can use either Curt hitch #31322 or Draw-Tite hitch #65052. I have linked instructions for both hitches and a video installation of the Curt hitch for you.

view full answer...

Answer 2

The only front mount hitches that are available or your 2011 Chevy Silverado 1500 are ones that locate the hitch opening below the front bumper of the truck like the Curt Hitch part #31322 or the Draw Tite Hitch part #65052. Often times the lower…

view full answer...

Answer 3

Currently, 2 front mount hitches fit your 2008 GMC 1500 4x4. They are the Curt #31322 and Draw-Tite #65052. Both have a 500 pound vertical pull and 9,000 pound line pull. The specifications on the Draw-Tite hitch #65052 from the top of the mounting…

view full answer...

Answer 4

Curt front mount trailer hitch #C31033 will fit your 2013 Jeep Grand Cherokee as long as the vehicle does not have factory tow hooks. There are no options if it does have factory tow hooks. Though we have heard of at least one customer who had a…

view full answer...

Answer 5

I contacted our representative at CURT about the CURT Front Mount Trailer Hitch #31322. He informed me that the distance from the center of the hitch pin hole, to the front edge of the bumper measures approximately 7 inches. We do not have a Hidden…

view full answer...

Answer 6

The instructions for installing the Curt 2 Inch Front Hitch #31322, see link, on a 2011 Chevrolet Silverado 1500 do say that you will need to trim the fascia as needed. First, you will install the side plates of the hitch to the vehicles frame rails.…

view full answer...

Answer 7

We do offer two front-mount 2-inch hitches for your 2013 Chevrolet Silverado 1500 including the Curt #31322 that you referenced. We have an installation video showing a 2007 Silverado that you can see by clicking on the included link. Also the…

view full answer...

Answer 8

There are only two options for front mounted hitches for your 2011 Chevy Silverado 1500. They are the Curt Front Hitch item #31322 and the Draw-Tite item #65052. Both of these hitches stick out below the front bumper and can not be adapted to go…

view full answer...

Answer 9

The Curt Front Mount Trailer Hitch Receiver #31322 and Draw-Tite Front Mount Trailer Hitch Receiver #65052 are the 2 options available for a front mounted receiver on your 2010 Chevrolet Silverado 1500. Both of these receivers will sit below the…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 12

Hey Dean, the Detail K2 Elite Snowplow part #K2AVAL8219ELT that you referenced comes with all of the electrical components it will need to install. It wires to the vehicle battery as well as comes with a wired switch that you would run to the cab of…

view full answer...

Difference Between Curt Hitch # 31322 and Draw Tite Hitch # 65052

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching