Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
When you’re towing, knowing exactly when your towed car’s brakes are applied gives peace of mind and prevents costly mistakes. The Roadmaster Stop Light Switch Kit wires directly into the towed car’s fuse box to send a 12-volt signal to your RV’s monitoring system every time the brake pedal is pressed. Unlike systems that only detect when the air cylinder moves, this setup shows what’s really happening with the pedal itself, so you always know your brakes are working the way they should.
If a supplemental braking system is not positioned correctly, it can keep constant pressure on the pedal, wearing down tires or causing brake damage without you realizing it. This stop light switch kit helps prevent that by confirming each actual pedal press—no guessing, no relying on indirect feedback. You’ll know right away if something’s off, before small problems become expensive fixes.
Some vehicles don’t have an ignition setting that keeps the brake lights active during towing. This kit solves that problem by providing its own dedicated signal to the braking system and the RV monitor. That means your setup stays safe and fully functional even when your ignition is off, so you can tow confidently without worrying about losing your brake light signal.
Flat towing can be a much more convenient way to take your car RVing with you than using a trailer or a tow dolly. It'll save you storage space both at home and at the campsite, and it takes less time and hassle to hook up.
To flat tow your vehicle, there are 5 basic components you're going to need: a tow bar, a base plate kit, a safety cable set, tow bar wiring, and a flat tow braking system.
| For the RV | Between the RV and Towed Car | For the Towed Car |
|---|---|---|
| Hitch | Tow bar | Base plate |
| Wiring plug | Safety cables | Braking system |
| Wiring adapter cord | Wiring kit/diodes |
The custom-fit base plate installs on the frame of your toad so you can connect the car to your RV with a tow bar. Hook up safety cables between the vehicles to ensure that the toad does not separate from the motorhome if the tow bar becomes detached. Tow bar wiring syncs your vehicle's signal lights with your motorhome's tail lights, as required by law in most states. Finally, the flat tow braking system - also required in most states - activates the brakes in the toad when you hit the brakes in the RV, making for smoother, safer braking, and preventing wear on your motorhome.
Customer Satisfaction Score:
91% were satisfied with this product
9% of customers were not satisfied
Ratings & Reviews
Kate F.
4/23/2026
Thank you for the detailed review and for sticking with the install George. That is a tight space to work in, and we really appreciate you sharing both the challenges and your thought process along the way. You make some very valid points about the alignment sensitivity and adjustability of the switch. I agree, that kind of precision fit without an easy lateral adjustment can make the install more tedious than it should be. It does not make it right, and feedback like this is exactly what helps highlight areas for improvement. It is great to hear that it has been working reliably for you over a few thousand miles so far. Your habit of checking function during hookup is a solid practice and definitely the way to go with setups like this. I will be passing your feedback along to the manufacturer for review, especially your notes on the switch design and mounting adjustability. Also, thank you for including photos even with the tight space. They are very helpful for others tackling the same install.
Victoria H.
1/14/2025
That's quite impressive Fred, nice ride!
Fred
1/8/2026
Everything works just fine! Great product and support! Thanks E-t
Josh B.
1/8/2026
Alan
9/8/2026
Its been a year and to be honest, I never have to think about my tow setup. Its there, it works perfect like the day I got it. I cant recommend this any higher. Smooth towing without worrying about it.
Lazer S.
9/8/2026
Michael R.
1/18/2024
Still working great
Mark S.
11/3/2025
Its a good choice because its easy in easy out. I have two jeeps that can flat tow, so i was covered for braking in either one
Do you have a question about this Flat Tow Brake System?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Kate F.
12/17/2025
I wish you could mount it there Donald, but those stop-light-switch studs are only designed to hold the switch bracket. Adding the pulley bracket changes the spacing and alignment, which can make the brake lights stay on, not come on, or throw off the Invisibrake’s operation. The studs also aren’t meant to handle the side-load from the cable, so Roadmaster doesn’t recommend using them. For drilling stainless, the trick is a cobalt bit (M35 or M42), slow speed, steady pressure, and cutting oil so the metal doesn’t work-harden. Are you new to flat towing, or just getting a different vehicle set-up?