Yates Keel Roller for Boat Trailers - Super-Heavy-Duty Rubber - 5-3/8" Long - 5/8" Shaft

See what our Experts say about this Yates Rubber Boat Trailer Parts

• Parts Needed to Add a 5-3/8" Keel Roller to a Boat Trailer
  Hey Dave, good to hear from you again! To replace your 5-3/8" wide keel roller, shaft, pal nuts, and bracket you'll need the following: - Yates Keel Roller # YR5244-105EC - Roller Shaft with Pal Nuts # CE10722A - CE Smith Adjustable Mounting Brackets # CE32004G The adjustable bracket can be used with any of the keel roller sizes since it's 2 individual brackets as opposed to a "boxed" style with a limited width. Mounting hardware isn't included (you'll need to pick it up at your local...
  view full answer...
• Will the Roller Shaft Part # CE10722A Fit the Yates Keel Roller Part # YR5244-105EC
  Yes, the Roller Shaft with Pal Nuts part # CE10722A is a fit for the Yates Keel Roller part # YR5244-105EC. If you are looking to replace the roller shaft on your existing Yates roller you would need to measure from the end of each white bushing. I have attached a list of all our roller shafts for you as well.
  view full answer...
• Do The 5" Yates Keel Rollers Have Bushings Or Sleeves?
  The Yates V Keel Roller # YR5213-5 does not have any bushings or sleeves. To get the bushings you would need the wider 5-3/8" Keel Roller # YR5244-105EC. We do have the PVC Keel Roller # CE29516 that is more durable than a rubber roller and will not mark up your keel. I recommend getting a new Roller Shaft with Pal Nuts # CE10722A if yours is showing signs of corrosion or wear.
  view full answer...
• Parts Needed To Add 12" Self Centering Keel Roller On Boat Trailer
  You could use the CE Smith Keel Roller for Boat Trailers - Self Centering - PVC - 12" - 5/8" Shaft - Amber but you would need to have new brackets welded on to your 2015 EZ loader boat trailer, or you could drill new holes so you can bolt on the CE Smith Universal-Fit Split Panel Brackets for Boat Trailers # CE10500G. This mounting slots on this bracket should only be roughly 11" apart so you will not be able to reuse your existing holes. You would also need a new, longer roller shaft #...
  view full answer...
• What Keel Roller Will Work For My Spring EZ Loader Boat Trailer
  The closest keel roller we have is # YR5244-105EC. It is 5 3/8 inch long with a 5/8 inch shaft. We currently do not have one that is exactly 5 1/2 inches.
  view full answer...
• Is there a 6 Inch Long Keel Roller for a 1971 Boat Trailer
  The best option is to use # YR5244-105EC which is 5-1/2 inches long so it will only be off by 1/4 inch on each side on a bracket with a 6 inch span. If you need a compatible shaft and pal nuts use # CE10722A. It has the 5/8 inch diameter shaft required for the roller.
  view full answer...
• Trailer Roller Bunks and Keel Roller Recommendations for a River Raft
  It sounds like you are looking for roller bunks such as # DL21741. These are 5 foot long sections (2 in a package) and are the longest we have available. Each section has 12 sets of rollers. They can be mounted directly to a wooden bunk or to the frame by using bracket kit # DL21742. If you are looking for a keel roller we have a 5-1/2 inch model # YR5244-105EC but no 6 inch. The next size up is 8 inches. With it you can use shaft # CE10722A with brackets # CE32004G or # CE10301G.
  view full answer...
• Keel Rollers for a 1991 Caulkins Boat Trailer that Will Not Corrode from the Inside
  A keel roller such as # YR5213-5 would work well for you since it does not have a metal sleeve inside. For the best corrosion resistance you would use stainless steel shafts to hold the rollers to their brackets. That can get expensive. We currently offer a zinc-plated steel shaft for this roller, # CE10722A, which is going to be in between regular steel and stainless as far as corrosion resistance. We also have roller # YR5244-105EC which uses nylon bushings instead of a steel sleeve....
  view full answer...
• Width of Inner Narrow Diameter On Yates Keel Roller for Boat Trailers # YR5244-105EC
  The inner portion of the Yates Keel Roller for Boat Trailers # YR5244-105EC is 2-3/4" wide. The Roller Shaft with Pal Nuts # CE10722A will be needed for mounting to your trailer.
  view full answer...

Do you have a question about this Boat Trailer Part?