Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to be taking a look at part number 464600 this is the wire frame clip. This clip is made of spring steel with a black enamel finish that's going to be used to secure one or more wires to the frame or panel surface of your trailer. You can see right here I have it on piece of angle iron. The piece of iron that I'm using today is going to be a little bit thinner than probably what your trailer frame's made of so it doesn't provide as tight of a fit. This is spring steel, so it's going to fit a variety of widths of trailer frames or panel surfaces and a very versatile clip. It's going to get the job done.
These are going to be designed to hold your wires up and out of the way making sure they don't dangle loose. It's going to help take out any slack in your wiring keeping them up and out of the way, safe and secure from any type of damage or harm. Very simple installation. The overall length is about one and five-eighths of an inch. The width from edge to edge is going to measure about a half inch and then the wire width capacity measuring from inside edge to inside edge is going to measure about three-eights of an inch. I have some 16 gauge bonded wire.
This is going to be wiring for a standard 4-way flat connector. Simply going to place it in there. The clip's going to feature a couple teeth on it. That's really going to help it dig into and hold its place on the trailer frame or panel surface. Once you have your wiring in there, simply just place the clip over the frame and you can see there it gives us plenty of room for our wiring to move.
Albeit it's still going to hold it in place so we don't have to worry about it dangling or very much slack in our wiring, it really cleans up our installation. That's going to do it for our review of part number 464600. This is the wire frame clip. .
Average Customer Rating: 4.8 out of 5 stars (138 Customer Reviews)
unbelievably quick shipping
Works as advertised.
good price
just what I ordered
works well
love these clips
These are big, they are for larger trailers.
outstanding service. one of the best shipping program i have experienced.
thank you
lou fetters
These work great to keep your trailer wiring out of harms way.
Simple, effective and looks good; and all at next to no cost........wow
The Items which I just received was what was listed, and the quility looks great. also the Delivery was very good and on time.
These are exactly what I was looking for, but couldn't find at automotive stores. Great price. Unbelievably fast shipping! I ordered them on Monday, they arrived on Tuesday!!
Just as advertised. Delievery prompt and accurate.
Exactly what i needed to hold wire loom to the frame of a Mercury 1/2 ton pick-up being restored. Yes, Mercury, circa 1949.
Great wire hanger for clipping the trailer wires up on the trailer frame.
Kind of difficult to to use with a harness type application. Would be great for just a few wires.
THE SERVICE WAS GREAT. SHIPPING FAST.AND THE E-MAILS LET ME KNOW EVERYTHING. THANK YOU ETRAILER.
As advertised. Fast shipment but sabotaged by the USPS when they sent my package to Hope Mills, NC rather than Fayetteville.The postal system may be punishing us for the eventual closing of the Fayetteville Postal SCF but eTrailer did a great job with their part of the sale.
I have used these before with great results. They can be used for brake tubing and electrical harnesses.
Can't beat the price!Living and having a hitch that is in and out of salt water you need this. Although I have not installed the products that I ordered they are upon inspection out of the box of high quality. I would like to say that this etrailer.com web site and their delivery process is phenomenal. It was delivered promptly and I was kept informed of the order and where it was in the process. Keep up the great job and I will return when looking for item you carry. Thank you.
It would be real nice if this information was put in the product description :
The height of this clip is 1-1/2 inches, width is 1/2 inch, width for wire capacity is 3/8 inch and the frame depth is 5/16 of an inch. Constructed of spring steel and has a black enamel finish.
These clips are useless for my boat trailer.
Easy to useThese work well to keep wiring in place along a trailer frame. I would recommend running the wires in wire loom first for extra protection. If you use wire loom you will need to bend the clamp open a little but this is easy to do.
The best pricing I ever found and shipping is very fast. Great Company to do business with. I plan to order more.
They are just what I needed. Tried twice with Amazon with no luck. Always best to go with the pros.
I did an online search for trailer supplies to rework my wiring harness on my trailer. Found etrailer and the online catalog was easy to navigate, the item descriptions were very specific and the prices were reasonable.
The user friendliness of the online catalog made it easy to order parts; no guesswork!!!
Do you have a question about this Electrical Tool?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Craig D.
8/7/2015
The clips are still attached to the trailer and the harness is still in place. No problems with the product!