TowSmart Wire Loom, 3/8" Diameter, 10' Long

Video Transcript for Review of TowSmart Wiring - Wire Loom 10 Foot - TS49QR

Hi, everybody, Andy here with etrailer. Let's take a quick look at this TowSmart Wire Loom. Now, this wire loom is basically a protective sleeve for your trailer or vehicle wiring. With this, you're gonna get a 10-foot piece of split plastic tubing, and the diameter's gonna be 3/8 of an inch, and it's made to keep your wires safe, neat, and organized. And because it's split down the side, you're not gonna have to thread your wires through. You're just gonna open it up, wrap it around your wiring bundle, and then you're done.

So, this is gonna be great for keeping things tidy and for protecting wires from abrasion, dirt, water, heat, and road debris. You typically use something like this if you're installing or redoing trailer wiring for lights or brakes. This is going to help prevent wear from vibration or rubbing against metal parts, which can lead to electrical problems later. Plus, this gives your wiring a clean professional look instead of a jumble of exposed wires. So, if your wiring's already enclosed or run somewhere safe and protected, you might not need this.

But if your wires are exposed, especially under a trailer or vehicle, this loom is gonna be a simple, inexpensive way to make your setup last longer and look better. If you have any other questions, whether it's about this, or anything else that we carry, don't hesitate to reach out. We wanna make sure that you're getting exactly what you need. Well, again, my name is Andy. Thank you for joining me.

.