Frame Clip Size and Styles Available
Updated 02/03/2010 | Published 02/02/2010
Products Featured in This Question
Question:
I know of three different sizes of frame clips. What size, sizes do you offer.
asked by: Dave A
0
Expert Reply:
The height of the Wire Frame Clip, item # 464600, is 1-1/2 inches, width is 1/2 inch, width for wire capacity is 3/8 inch and the frame depth is 5/16 of an inch. Constructed of spring steel and has a black enamel finish.
Metal Looms are also available and we have the 1/2 inch, item # A0500, and the 1/4 inch, item # A0250, which are installed usually with self tapping screws.
expert reply by:
Robert G
0
Product Page this Question was Asked From
Continue Researching
- Article: Trailer Lighting Requirements
- Article: Trailer Wiring Diagrams
- Q&A: Difference Between SWC9041-1, SWC9042-1 and 464600 Trailer Frame Wire Clips
- Q&A: How to Install Ground Wire To Trailer Connector on Utility Trailer
- Q&A: Slipper Spring Hanger Positioning for 7,000 lb Tandem Axle
- Q&A: Clips and Clamps to Attach Wires and Wiring Harnesses to the Bottom of a Trailer Frame
- Q&A: Recommended Trailer Wiring To Charge Battery And Use Solar Panels
- Q&A: Will Curt Class V Hitch # C15810 Fit a Ford F-250/F-350 With a Full Size Spare Tire
- Q&A: Drop Measurement of Curt Class V Trailer Hitch # C15810
- Article: Best Vehicles to Flat Tow Behind an RV
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Routing the Power Wire for a Trailer Wiring Harness
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: How to Measure for Trailer Hitch Drop