Thickness of Metal The Redline Wire Frame Clip Works With.
Updated 05/01/2020 | Published 04/30/2020
Question:
What is the range of metal thickness this clip P/N: 464600 work with?
asked by: J.P.
0
Expert Reply:
The Redline Wire Frame Clip part # 464600 works best metal thicknesses of 5/16" it can go as thin as 1/4" and up to 3/8" in thickness.
expert reply by:
Randy B
0
Product Page this Question was Asked From
Continue Researching
- Article: Trailer Lighting Requirements
- Article: Trailer Wiring Diagrams
- Q&A: Difference Between SWC9041-1, SWC9042-1 and 464600 Trailer Frame Wire Clips
- Q&A: How to Install Ground Wire To Trailer Connector on Utility Trailer
- Q&A: Wire Size Used to Install MaxxFan Deluxe Roof Vent w/12V Fan & Thermostat MA00-05100K
- Q&A: Brake Lines for Boat Trailer In Salt Water
- Q&A: Clips and Clamps to Attach Wires and Wiring Harnesses to the Bottom of a Trailer Frame
- Q&A: Slipper Spring Hanger Positioning for 7,000 lb Tandem Axle
- Q&A: Recommended Trailer Wiring To Charge Battery And Use Solar Panels
- Article: Routing the Power Wire for a Trailer Wiring Harness
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Best Vehicles to Flat Tow Behind an RV
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: How to Measure for Trailer Hitch Drop