4-Way Flat Trailer Connector w/ 72" Harness, Circuit Tester and Wire Taps
Item # 18252
Our Price: $28.77
Confirmed to Fit
1988 Chevrolet Astro
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Orders above $99 qualify for Free Shipping
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (209)
- Q & A (0)
- Photos
1988 Chevrolet Astro - 4-Way Flat Trailer Connector w/ 72" Harness, Circuit Tester and Wire Taps
- Trailer Hitch Wiring
- 4 Flat
- No Converter
- Tekonsha
This universal, splice-in wiring kit includes a 4-way flat connector, circuit tester, 72" of bonded wire, and 4 wire tap connectors. Color-coded, bonded wires have functions printed on them to make installation easier.
Features:
- Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights
- Compatible with 5-pole, 6-pole, and 7-pole adapters (sold separately)
- Works with 2-wire electrical systems
- Splices into your vehicle's wiring with the included quick-splice connectors
- Bonded wires are color coded (see wiring configuration below) and labeled
- Included circuit tester helps ensure wiring is correct during installation
- Includes durable, molded-rubber, standard female output socket
Specs:
- Harness length: 72"
- Max amperage: 7.5 amps per circuit
- Wire gauge: 18
- Limited 1-year warranty
4-Way Trailer Connector Installation
Because the color/function of the wires on this connector may not match the color/function of those on your vehicle, be sure to use the included tester to double check the function of each wire on your vehicle's tail light wiring harness before installing this connector. Once you've figured out the functions of your vehicle's wiring, use the included quick-splice connectors to connect the corresponding wires on the trailer connector. Quick-splices, or "wire taps," offer a quick way to make connections without you having to strip and twist wires. Just place the wires in it and snap the cover down.
The number 1 reason trailer wiring comes up faulty is a bad ground, so make sure your ground wire has a solid and clean connection to metal. To make this connection, you'll need a self-tapping screw and a ring terminal (sold separately).
Wiring Configuration
| Wire Color | Wire Function |
|---|---|
| Green | Right turn and brake light |
| Brown | Tail lights and running lights |
| White | Ground |
| Yellow | Left turn and brake light |
Quick Tips:
We install a lot of wiring harness around here, so we thought we'd share a few tips we've picked up over the years:
- Butt connectors - especially heat-shrink ones - provide the most secure, longest-lasting connection, so we'd recommend you grab a few and swap them out for the quick-splices in this kit.
- Use a circuit tester on the plug terminals once the harness is installed to make sure everything's working. There's nothing worse than figuring out that you have a bad ground or a faulty connection right before you're about to hit the road.
- Be sure to put a little bit of dielectric grease on the 4-way plug to protect the terminals from dirt, grime, and corrosion.
18252 Tekonsha Chevrolet Astro Wiring Harness with Chevrolet Astro End 4-Pole Connector Kit and Circuit Tester - 6' Long
20252 Alternate
Installation Details
California residents: click here
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Product did not meet expectations
- Alternate product found
- Wrong item was ordered
Customer Reviews
4-Way Flat Trailer Connector w/ 72" Harness, Circuit Tester and Wire Taps - 18252
Average Customer Rating: 4.6 out of 5 stars (209 Customer Reviews)
This universal, splice-in wiring kit includes a 4-way flat connector, circuit tester, 72" of bonded wire, and 4 wire tap connectors. Color-coded, bonded wires have functions printed on them to make installation easier.by: Vincent05/30/2019
2014 Smart fortwo
Thanks to the video I did not have a problem installing the trailer wiring on my 2014 Smart Fortwo.
Thanks
by: Tim C10/26/2019
Awesome product never any issues use along easy install practically don’t need instructions
by: Eric 05/22/2023
Chevrolet Corvette
This harness worked great for my Corvet te.
by: Michael11/07/2022
Worked great for 6 mo. Ish. I’ve had the right side wire become loose/break so occasionally the right side will randomly choose to quit working but (at least for me) that’s not a huge deal with how little I use my trailer. solid purchase overall.
Katrina B.
11/18/2022
I have contacted the manufacturer and the have suggested that the wiring harness should be checked for a good connection, it sounds like the harness may not be connected correctly.
by: Brian03/14/2019
First thing I noticed were the online videos that can be saved to a file. nice! also noticed the instructions for assembly of the tow bar was small and difficult to read, (my mechanic was crying throughout the installation) There were no instructions on the wiring kit installation, even a photo of the wire to wire color placement would have helped, but my mechanic went on line and got the photo from an outside source - thus the 4 stars, not five. - other than that it worked out very well, the products are solid, well made, and superbly engineered. everything was inside! thanks !
Mike L.
3/15/2019
We have a link to the installation instructions as well as some install videos on the product description page.
by: Russell04/03/2017
2006 Ford Focus
The installation documentation, along with the video aid, was very helpful and easy to understand. It helped a lot, and made the installation fast and easy. I like it a lot, and I appreciate the support I got on a minor issue which was easily and quickly taken care of.
Russell
4/4/2018
The products I purchased work beautifully! I haven’t experienced a single issue with anything.You guys are terrific!
by: Timothy04/06/2023
Each trailer is the best. Very easy to order from. Also, Sherry was very helpful and friendly.
by: Tom08/23/2021
1990 Dodge Van
Took me almost a year to actually get to installing this on the van, but wanting to use the trailer was a strong motivator. Its just a basic wiring set with quick connect clips in a bag. The fact that I was installing this on an extended camper version of the van this was designed for complicated the install, but "fortunately" there were enough rust holes that I could drill where I need to drill. Wires were long enough for the job (exactly the length needed) and the clips came pre-filled with silicone grease. Nice. Came with no instructions, but the on-line installation video is *excellent* and guided me thru the entire process. Overall, it was a convenient way to buy and install a wiring harness on my older van. Only two minor complaints:
* Did NOT include a weather-proof cap for the plug, which hangs outside by the hitch. I took the one included with the wiring kit for my Suburu (from etrailer) since that plug is stored inside the vehicle.
* The 12v circuit tester did NOT work. Fortunately I had my own tester.
by: Johnny12/16/2018
2007 Ford Focus
This was a pain in the rear end. Wires were not labeled and the tester was useless. Had to go to online for some instructions (none included with kit). Took a long time to get it wired to the car.
Mike L.
12/17/2018
On the product page, we have a link to the instructions as well as a couple of install videos.
by: David06/01/2019
1984 Jeep CJ-7
I got a 4-wire harness to connect my jeep to a utility trailer. The harness worked perfectly.
The connectors were good--surprisingly, they were stuffed with noncorroding gel so that the jeep's wires are protected. There were no specific instructions for the hookup, but simply removing the taillight lenses showed which color wires to splice.
The supplied tester failed to function, but that wasn't a problem at all--I didn't really wish to poke additional holes into the wires anyway.
Took a half hour to complete.
by: Kyle03/23/2017
2001 GMC Sierra
Has held up great over a year so far. I recommend wrapping the wiring in electrical conduet to help make the set up last even longer like I have
Kyle
3/23/2018
Perfect!
by: Matt F03/09/2020
Product as described and very easy to install. In my case it didn't work, because the original wiring on my truck apparently is bad and I couldn't figure out what was faulty, so I ended up getting another harness that plugs into existing tail light harness, which worked great.
by: TJ06/27/2013
2006 Chevrolet Malibu
I watched the video online to install the wires and did it all by myself. Product arrived in good condition.
Tj
12/26/2014
No problems, whatsoever! Good product for the price. I especially loved the fact that one could watch the video online on how to install it. Thanks!
by: Jeff G.06/10/2017
2005 Ford Focus
I installed this wiring kit along with a hitch. This was pretty easy to install, and the directions were easy to follow. The hardest part was pulling up the the liner in the hatch back area to get to the wires.
by: Mike D.05/06/2020
I needed a hitch and wiring harness to pull a small trailer for hauling lumber. The harness was easy to install and has worked without any problems over the past year.
by: Stan05/24/2018
1998 Chevrolet Blazer
Only thing that needed to be changed was wire connectors. Type included with the plug are easy to install (no insulation stripping, just clamp) but are not reliable. Throw those away and use standard crimp butt splices. Plenty of wire included, so I cut to more convenient length, spliced, and taped 8 inches on both side of splice. Tester is a nice touch, save in your tool box after installation.
by: Timothy09/17/2022
1992 Dodge Van
Over all good experience
Missed the bolt package in my delivery but it was sent out right away... Friendly customer service... Hitch went on without a hitch. Great product..I will use this company again.. Thank you
by: John11/13/2021
The box of contents I received was partially damaged and the boxes inside not properly secured and wrapped and damaged inside.There was a hole in the box and am missing one elecrical connector. Everything else was O.K.
Jenny N.
11/16/2021
I will have our customer service team reach out to you.
by: Tony 05/30/2023
Their customer service is amazing and within a few day my order was here.
by: big chicken07/03/2015
2003 Ford Focus
Perfect & simple as one, two three then your done. Thanks etrailer
Super Fast delivery from etrailer 5 star*
Big C.
7/27/2016
Everything is still working great.100 satisfied with the hitch and all I purchased.
by: Stephen09/19/2018
Exactly what I was looking for. Great price and fast shipping.
Stephen A.
9/19/2019
Works great!
by: Mike K05/24/2018
2013 Ford Edge
Worked perfect. I used it to extend the pigtail on my tow dolly. etrailer has great shipping & service. Have bought from them many times.
by: Gene08/15/2014
Your product was easy to install and works fine. However, one thing that I think would be a good idea, would be to include a set of installation instructions with the product. I didn't know that the metal tabs on the connectors had to be pushed all the way down before snapping the plastic hinge over the top of the tab. A friend of mine informed me of that.
by: K Sally06/07/2017
Hummer H3
Everything was sent according to order and mailed extremely quickly. Product was easy to use on a Hummer H-3 for a trailer hitch.
25
209
Show More Reviews
See what our Experts say about this Tekonsha Custom Fit Vehicle Wiring
- Installing a 7-Way Connector and Brake Controller On a 1988 Ford Bronco II for TowingTo tow a trailer with trailer brakes you will need a 6-Way or 7-Way connector depending on which style of connector is on the trailer you will be purchasing. I would recommend going with the 7-Way connector, which can be used with an adapter, item # 47549, if the trailer has a 6-Way connector installed on it. You will need a 4-Pole Hardwire Kit Including Circuit Tester, item # 18252, and a Brake Controller 7 & 4 Way Installation Kit, item # ETBC7, for this installation. Even though your...
view full answer... - Recommended Trailer Hitch Receiver And Wiring For 2020 Forest River Heritage Glen 5th Wheel TrailerAs long as the frame of your 2020 Forest River Heritage Glen 5th Wheel Trailer is 18" - 51" wide I highly recommend the Curt Adjustable Trailer Hitch Receiver # C13701 which can be bolted or welded to the frame of your trailer and offers a 500lb maximum tongue weight and 5000lb maximum trailer weight. You will want to check the owner's manual of your trailer or contact the manufacturer to verify the maximum trailer weight your trailer can tow. Since you are planning to tow another trailer...
view full answer... - Replacement Hardware For Trailer Hitch On A 2004 Ford Explorer Sport TracThere are two options of trailer hitches that are confirmed for your 2004 Ford Explorer Sport Trac so first you will need to find out which one you currently have. There is the Draw-Tite Hitch # 75112 and the Curt Hitch # 13407. When you find out which one you have you will need to order the Replacement Hardware Kit # RHK. When you get to the hardware kit page you will see a box that asks for the hitch item number depending on which hitch you have you will have to type in the part number...
view full answer...
- Can Trailer Hitch Receiver Be Installed on 1997 Chevy Blazer LS With Swing Away Spare TireYes, the Curt Trailer Hitch Receiver # C13020 can be installed on your 1997 Chevy Blazer LS. The swing away spare tire will not interfere with the installation. If you plan on towing and need wiring, you will also want the 4-Pole Hardwire Kit with Circuit Tester # 18252. This will provide you with a 4-way to power your trailer's signal lights. For a ball mount, check out the Curt # D-4. You will also need # 19260 for a 1-7/8" ball or # 63845 for a 2" ball.
view full answer... - 4-Pole Trailer Wiring Harness for 1972 International Scout IIFor your 1972 International Scout II we offer a 4-pole pigtail wiring harness kit that includes a circuit tester to allow proper identification of the function carried on each vehicle wire (wire colors are not fully standardized so testing is the way to go). I have linked a representative installation video as well as a video on how to use the tester. This 4-pole can be used with mounting bracket # 18144 from TowReady.
view full answer... - Trailer Lights Do Not Work with 2005 Ford F-150 That Has No Power to FusesSome Ford trucks that do not have the factory tow package can still have dummy fuse locations for the trailering functions. These fuse receptacles may not be live on such trucks. You can check with your local Ford dealer using your VIN to see exactly what equipment Ford installed in the truck at the factory. You can also still install a 4-pole using kit # 18252. This will splice into your tail light wiring using the included fasteners and the included circuit tester allows you to identify...
view full answer... - Installing a 7-Way Connector on a 1999 GMC Yukon and Wire Functions on 1981 Coachmen Travel TrailerThe first thing you should know is there isn't exactly a standard for wire color/function. You pretty much have to ignore wire colors and instead wire by function in many cases. There are some constants though such as tow package wire bundles under the dash of certain Chevy and GMC vehicles, but not the 1999 Yukon. On your 1999 GMC Yukon the other ends of those blue and orange/red wires are very difficult to access so it is recommended to hardwire in a 7-Way trailer connector and a brake...
view full answer... - Solution for Adding Second 4-Way to 4-Way WiringBest option we have for that would be a 4-way kit like the part # 18252 which you can splice into your current 4-way wiring to give you a second one like you are looking for. There isn't a y-adapter available like you mentioned.
view full answer... - Recommended 7-way Connector For 2010 Ford F-150If your 2010 Ford F-150 came with a factory 7-way connector you will be able to use the Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 7-Way and 4-Pole Flat Connectors # C55774 you were looking at. If your F-150 did not come with a factory 7-way connector you will need to use the # ETBC7 if your truck has a 4-way connector already installed, or the 4 Pole # 18252 and # ETBC7 if your truck did not come with a factory trailer connector. The # ETBC7 will plug into your...
view full answer... - Installing Brake Controller 2005 Ford Explorer Sport TracThe Explorer Sport Trac models were not prewired for a brake controller from the factory. Does the vehicle already have a 4-pole trailer connector? If not, you can install one using part # 18252. To install your brake controller, we offer an installation kit, part # ETBC6 for a 6-way trailer connector, or part # ETBC7 for a 7-way connector. The install kit includes everything needed to complete the install, including an adapter to convert your 4-pole trailer connector to a 6 or 7-way....
view full answer... - Trailer Wiring Harness Available for 2022 Lexus RX350If your Lexus RX350 already has the tow package which provides the taillight converter that's plugged into the connector located behind the passenger side cargo area bulkhead as shown in the linked instructions, you'll just need the # 118252 which plugs into the connector located behind the rear bumper. If you don't have the tow package, you'll need the # C56217 which includes both the converter that plugs into the connector located in the cargo area but also the 4 pole connector that...
view full answer... - Does Replacing Trailer Wiring Connector Require Disconnecting BatteryWhen replacing a trailer wiring connector that carries a 12 volt accessory circuit like a 7-way like the part # PK12703 it would be wise to disconnect the battery as that circuit is hot all the time and it could cause a short. But if you were replacing a 4-way like # 18252 with the vehicle off none of the pins would have voltage at any time so you could do that without disconnecting battery.
view full answer... - Parts Needed to Tow a Trailer with Brakes with a 2015 F-550 Box TruckFor a 2" trailer hitch receiver on your 2015 Ford F-550 I recommend going with the Curt # C15445. This has a tongue weight rating of 2,550 lbs and a gross trailer weight rating of 17,000 lbs. If the weight capacity of your F-550 is lower than these ratings then you will be limited by the weight ratings of your F-550. Please note that if you have a box truck that sits further out at the rear you may have trouble using the receiver. If you don't already have a 4-Way Flat connector then you...
view full answer... - Trailer Hitch for the Back of a 2002 Wildcat 5th Wheel TrailerYou would have to check the literature that came with the trailer or check with the trailer manufacturer to determine if the bumper is rated for towing and has a high enough capacity. Usually bumper mounted hitches on a trailer are for accessories only; such as a bike rack. What I recommend is a frame mounted hitch such as # 13703 because it will be safer since it will be attached to the frame. This hitch is the most versatile since it fits frame widths of 22 to 72 inches, can be welded...
view full answer... - Brake Controller Wiring Harness Location In A 2016 Ford F-550 Cab And ChassisThe wiring adapter you will need to install a brake controller like the Tekonsha Prodigy P3 Brake Controller # 90195 on 2016 Ford F-550 Cab and Chassis is the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers # 3034-P. This adapter plugs into the connector behind your vehicle's dashboard. To reach the connector, first locate the notch in the access panel in the center of the dash, near the passenger side. Using a trim panel puller, like the # PT73HJ, carefully pry the panel...
view full answer...
- Troubleshooting Trailer Wiring That Blows Vehicle Fuse When Brakes are AppliedYou are overdrawing the brake light circuit with the load you are putting on it from your trailer wiring. This is either because your trailer has a short on it that needs to be fixed, or you are just overdrawing the circuit. Most likely it's just overdrawing, but you should still inspect the wiring of the trailer looking for any cut or exposed wire and fix as necessary. Now if the problem is just that you are overdrawing the circuit you have two options. You can convert your trailer lights...
view full answer... - Recommended Brake Controller and Custom Wiring for a 1997 26 Foot Ford E-350 Chassis Motor HomeThe brake controller I recommend is the Tekonsha Prodigy P3 # 90195 because its one of the most popular and highest rated brake controllers we currently offer. It has a LCD display and it will be very user friendly. If your 1997 E-350 motorhome has an existing 4-way connector, you will need the custom wiring adapter # 3035-P to install the brake controller and the 4-pole to 7-pole and 4-pole adapter # 37185 to complete your wiring. If there is a tow package present your E-350 will have...
view full answer... - Trailer Hitch and Wiring Recommendation for a 2001 Ford F-250 Stake Pocket TruckIf there is no trailer wiring at all at the rear of your 2001 Ford F-350 with a stake bed you are going to have to hardwire in a 4-way and then a 7-way adapter after. If there is a 4-way connector currently or you find the square connector that the part # 20031 attaches to you could go that route as well. For a hardwire 4-way you would need the part # 18252. Now if your trailer does not have brakes all you would need is the part # 37185 as an adapter to convert the 4-way to a 7-way. If...
view full answer... - Availability of a T-1 Harness for a 2008 Hummer H3As your H3 was not equipped with the tow package, the Hardwiring Kit you referenced, part # 18252 is what you would need. I have provided a link to an install video you can refer to for assistance. The video shows the 4-pole being installed on a different vehicle, but the procedure would be the same. You would use the tester to probe the wiring behind your tail light assemblies, to determine which circuit to tap each wire of the harness into. have a helper activate the right turn signal,...
view full answer... - Wire Harness Needed For A Short Bed 2008 Ford F-250 With A Long Bed Installed On ItI assume you're referring to a longer wire harness for a 7-way connector so that you can tow a trailer. If this is the case then you'd just use a standard 4-pole connector like # 18252 and splice it into the taillight wiring instead of running it up to the cab/engine bay. From there you can install a 7-way like the # ETBC7 to gain braking functions. It will come with a length of wire to run up to the battery for power and to the cab for a brake controller. If you're looking for something...
view full answer... - Adapter Recommendation for Converting Separate Trailer Brake Lights from Turn Signal to CombinedWe have a signal converter that is designed for converting your signal which is separate to combined for the stop and turn circuit. For that you'd want the part # RM-732 wired into your vehicle taillights and you'd be set.
view full answer... - Recommended Trailer Hitch and Wiring for a 1999 Mercury MystiqueFor your 1999 Mercury Mystique, I would recommend the Curt Class I Receiver, part # C11113. The installation hardware is included with the receiver. I will provide a link below to the installation instructions. You will also need a Draw Bar # C45016. You will need the appropriate trailer ball, if you do not already have one. The coupler on your trailer should have the necessary ball size stamped on it, which should be either 1-7/8 or 2 inch. For a 1-7/8 inch ball I would recommend part...
view full answer... - How to Transport a Tow Dolly when Towing an Enclosed TrailerIf you don't want to have a tow dolly in the enclosed trailer then the easiest way to transport it (empty) is to install a trailer hitch on the back of the enclosed trailer and actually tow the dolly behind the trailer. The only catch is that in some states it is illegal to tow a trailer, or in this case a dolly, behind another trailer. So you would just have to check the laws in the states you will be traveling in. The most versatile option and the most likely to fit is Curt hitch # 13703....
view full answer... - What Do I Need to Use Hitch C11109 with my 2004 Chevy CavalierThe hitch, # C11109, includes all the mounting hardware you need to install the hitch to your 2004 Chevy Cavalier. In order to tow a trailer, you also need to purchase a drawbar, and the ball itself that sits on the drawbar. The drawbar for this hitch is part # 3592. This bar includes a hitch pin and clip. Your drawbar requires a ball with a shank diameter of 3/4 inch. I have added a page link that will show you all the balls that would fit your drawbar. You need to select the ball diameter...
view full answer...
Do you have a question about this Custom Fit Vehicle Wiring?
Info for this part was:
Test Fit:
Joe V
Test Fit:
Nicholas E
Test Fit:
Rick A
Test Fit:
Shane T
Test Fit:
Jared G
Test Fit:
Robert C
Expert Research:
Mike L
Expert Research:
Sarah L
Expert Research:
Robert G
Expert Research:
Patrick B
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Reno H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Expert Research:
Jeffrey L
Video Edited:
Zack K
Video Edited:
Andrew K
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Mike H
Video Edited:
Sue W
Video Edited:
Chad S
Video Edited:
Chris R
Updated by:
Lindsey S
Updated by:
Laura H
Updated by:
Wilson B
Updated by:
Alexander C
Updated by:
Isabelle B
Updated by:
Sabrina W
Video by:
Alan C
Video by:
Jonathan Y
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Vincent S.
5/31/2020
Just fine.