Could Roller From Erickson Strap Work with 77314 Wheel Net

Updated 01/19/2026 | Published 08/14/2024

Products Featured in This Question

Erickson Adjustable Wheel Net with E-Track Fittings - 1,166 lbs

(149)

$39.64

Erickson E-Track Wheel Tie-Down Strap with Roller Idler and Ratchet - 2" x 12' - 1,100 lbs

(126)

$37.29

Question:

I currently use the e-track wheel tie down strap em58523 to tie down my Can-Am Spyder to my trailer. The front fender have extremely tight clearance and the rubber blocks are difficult to position. I am considering two wheel nets for the front tires, but have two questions. Due to the fender shape I have to use the roller idler to clear the fenders. What is the width of the strap can I use the rollers I already have and is the length of the free ratchet end long enough for me to use in the same way I use the em58523s. I added pics of my current setup to show what I need to do.

asked by: Mike B

Erickson Wheel Net with Can Am Spyder
(click to enlarge)

Expert Reply:

Hey Mike, so the Erickson wheel net for e-track part # 77314 that you referenced has a strap width that is the same 2 inch as what the Erickson wheel strap part # EM58523 you have now has so if you wanted to use the roller you certainly could.

This is actually a really clever solution to your fender clearance issue that I wouldn't have thought of.

expert reply by: Jameson C

Jameson C.

1/19/2026

Hey Mike, how did the Erickson wheel nets work out with your Can-Am Spyder and the roller setup? It sounds like a smart way to handle the tight fender clearance. Sharing how it performed could help others with similar trailers.