Waterproof cameras let you keep an eye on your blind spots whether you're changing lanes on a busy highway or backing up into a tight campsite space. Motion sensors automatically power the monitor to alert you of prowling animals or trespassers.
Features:
Specs:
Note: Will not work on 2016 and newer Mercedes Benz Sprinter or GM trucks that have PWM wiring.
When you've hit some heavy traffic on the way to the campsite, the last thing you want to worry about is getting into a wreck. This wireless backup camera system with side marker light cameras helps minimize blind spots when someone is speeding past you on a busy road. The camera on the rear will also give you peace of mind that you'll be able to back up more safely, even at nighttime or in other low-light conditions.
Stressed about not knowing what is happening around your large Class A motorhome? Whether you're on the road or parked at the campground, this camera system includes 3 cameras so you can monitor everything going on around your RV. The DOT-approved side marker lights have detachable covers so it's easy to swap out the LED bulbs later on in the future.
The 2 side amber lights have a 65-degree viewing angle so you can keep an eye out on the sides of your RV, whereas the rear camera has a 120-degree viewing angle to help you navigate while backing up.
Or if you're set up at a campsite for the weekend, the motion sensors on the cameras will automatically power the monitor on if they sense movement in the form of a prowling animal or person.
Tired of yelling back and forth to your partner out the window as you're struggling to back in at a good angle? The built-in microphone on the rear camera and integrated speakers on the monitor allow a spotter to relay information or instructions to you from outside your vehicle. This makes it much easier and safer for you to back up in a crowded campground.
No more wondering if you're getting too close to another vehicle, tree, curb, or your kid's bike while backing up. The rear assist marker lines take out the guesswork to avoid collisions and safely maneuver your RV. The lines are displayed in 3 different colors (green, yellow, and red) to help gauge the proximity of objects within your view.
The rear camera has 8 infrared LEDs and the side cameras have 12 infrared LEDs, so you'll have a clear picture even in low-light conditions at dusk or in complete darkness at night. These LEDs provide ample illumination up to 16' for the rear camera and 39' for the side cameras should you arrive at the campsite after dark. And during the day, the integrated IR cut filter blocks out the infrared light during the day so you'll still be able to have crips, natural-looking images.
If it's raining out, or if you just simply need to wash your RV, the waterproof, IP65-rated camera will be protected against low-pressure water jet sprays. And if you're driving through rough country roads, the camera will resist dust and dirt from building up or getting inside.
This camera system includes 2 different mounting options for the monitor, depending on how you want to display it. You can either use the suction cup to stick it onto your dashboard or windshield. Or you can attach the tabletop mount so the monitor sits on your dashboard, and the 4 non-slip pads will help prevent it from shifting around. To power the monitor, simply plug it into a 12-volt light or cigarette lighter outlet.
Because this system is wireless, installation is much easier than it would be with a wired system, as you'll only need to do minimal drilling and wiring. The side marker lights will typically replace your existing clearance lights, and the rear camera will install onto the back. Both should be bolted down with the included mounting screws. You are, however, able to install the cameras in other areas on your RV. Just be sure that the cameras won't interfere with any slide outs or other moving components.
With both the side and rear cameras included, this system can be used for both observation and for backing up. Just wire the side marker cameras to the running lights and the rear camera to the reverse lights. A trigger wire is also included to wire the side cameras to your turn signals. So whenever you need to make a right-hand turn and activate the blinker, that camera view will immediately pop up on the monitor.
California residents: click here
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.