In-stock alternatives that are ready to ship
Torx flathead screws make securing a wood floor to your trailer quick, easy and economical with a 1/4" diameter and type F points for heavy-gauge sheet metal, aluminum, cast iron and zinc.
Features:
Specs:
TFX150, Screw, Floor Torx Head 1/4" x 1 1/2" Self-Tap
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Male: Today in our enclosed trailer, well be installing the Redline rubber bumper in the 2-1/2 round, part number 385800. To mount the new Redline rubber bumpers, were going to be using the Redline inch-and-a-half long standard torx trailer floor and wall liner screw, part number TFX150. Were going to begin here by opening up the side door. We need to undo the chain that limits how far the door can open. This customer would like the door to open all the way up to allow him to load an ATV in through the side door.Now that we have the chain removed, were going to go ahead and open the door all the way up and line up where well need to mount our new rubber bumpers on the side of the trailer. The rubber bumpers will be mounted to keep the side door from opening all the way up and making contact with the outside of the trailer.
For the bottom one, well have to mark our location and then well have to drill a hole here because theres not an existing screw where wed like to mount the rubber bumper. Youll also notice that theres a little piece of trim here that were going to have to groove out the back side of the rubber bumper to allow it to fit flat against the side wall of the trailer. To do this, well simply use our rotary tool and trim out an area on the back side.Now that thats done, well go ahead and use our 7/32 drill bit to put a pilot hole in for the lower location. Now that weve got our hole drilled, well go ahead and take our rubber bumper and were going to add a couple washers here because theres a larger hole in the center of the rubber bumper from the screws that were actually using. Go ahead and put both washers on and then well put the new screw in place.
Well go ahead and tighten it down, and double check to make sure it does what we want it to. As you can see here, the door is not hitting the side of the trailer anymore.On the top location, well take out the existing screw thats in the side wall. We do have to run our 7/32 drill bit in at the top location to enlarge the hole just a little bit and, again, well add a couple washers in place and then well put our screw through the rubber bumper and install it in the top location. Now that weve got the top one tightened down, that will complete our installation. As you can see here, the door no longer hits the outside of the trailer, and thats it for our installation of the Redline rubber bumpers in the 2-1/2 round, part number 385800 on our enclosed trailer.
.
Average Customer Rating: 4.8 out of 5 stars (12 Customer Reviews)
Torx flathead screws make securing a wood floor to your trailer quick, easy and economical with a 1/4" diameter and type F points for heavy-gauge sheet metal, aluminum, cast iron and zinc.This is definitely the place you want to do business with. I ordered parts for our cargo carrier to haul our car. It was easy to figure out just what we needed (since we were novices). Received our order in 3 days. Great service!
Gloria - 03/29/2016All my trailer needs are filled through trailer. I have repaired my wiring with their videos and found the trailer screws quickly when they were nowhere to be found in my hometown.
Used screws to replace plywood on horse trailer ramp. Was very happy to find the correct size screw with quick and easy order process and delivery. Refurbished ramp is in great shape after first year replacement.
perfect replacement screws for replacement deck on my snowmobile trailer. fast service, quality product, thank you.
I was happy to be able to find the appropriate screws for my re-decking project on my snowmobile. I was very pleased with how well these screws work, and they were delivered quickly and at very low cost.
Just what I needed to attach new plywood to aluminum snowmobile trailer.
Excellent customer services and a delivery service that is top notch. I will definitely continue to order all my Trailer needs from etrailer.
Item was exactly as described. I was amazed at the fast shipping. The package was ready for shipping within hours of my order, maybe earlier. Great to do business with. Thanks everyone.
Product worked great! Love the service I get from e-trailer!
I got just what I wanted the price was great and shipping was fast.
Ok
Looking great! Easy to order and arrived quickly.
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.