Washer Spindle Tongue

Part Number: 165863

In Stock

$12.42

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Redline 1 Inch I.D. Accessories and Parts - 165863

Show All (1) Product Images

Show Fewer Product Images

Customer Photos

Show All (1) Customer Images

Show Fewer Customer Images

Videos

Let’s Check Out the Washer Spindle Tongue

Show All (1) Videos

Show Fewer Videos

Need help with installation?

Locate installers near me

1-800-940-8924 to order Redline accessories and parts part number 165863 or order online at etrailer.com. Free expert support on all Redline products. Great prices and Fastest Shipping for Washer Spindle Tongue. Accessories and Parts reviews from real customers.

Redline Accessories and Parts - 165863

Trailer Spindle Washer for 1" Spindles

165863 Washer Spindle Tongue

California residents: click here

Video of Washer Spindle Tongue

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.

Video Demo Redline Trailer Spindles 165863

Let’s Check Out the Washer Spindle Tongue

Video Transcript for Let’s Check Out the Washer Spindle Tongue

4.8

35 reviews

5 Stars		(32)
4 Stars		(2)
3 Stars		(0)
2 Stars		(0)
1 Star		(1)

by: John T08/12/2015

Very nice part's and fit great.Will continue buying parts I need for trailers from you guys

Thanks
John T

Click to Enlarge

by: John 09/07/2024

It's what I ordered. Customer service was good.

by: Kyle C08/22/2024

Quick service/shipping. Part was as advertised. Thanks

by: Gary09/17/2020 One Year Later

The spindle washers, and the hub assembly, and the tires and rims have all been exactly as ordered. Thanks

by: Adam04/15/2016

Great Product. Exactly what I was looking for. Fits well and is exactly what was described. Fast shipping as well. My horse trailer is back on the road! I will definitely be using etrailer.com for the rest of my trailer parts. It works really well for me because I am 36 miles from the nearest parts house. Ships right to my house.

Thanks for the great service and products.

Adam

by: RjR05/29/2019

Most hardware and auto parts stores do not carry or know where to find this type of washer. etrailer.com made it easy to find and simple to order, with fast delivery.

Thank You etrailer

by: Jean C09/14/2017

Great quality products at excellent prices. Exactly what I needed to complete my project. It's always nice to have a couple of complete trailer hubs ready to go in case of an on the road failure. Now I do. Shipping was quick as well. I will buy my trailer parts from etrailer again in the future.

by: Steven 08/28/2023

I couldn’t find these washers at the local auto parts stores. etrailer came through for me again. Thanks

by: Mike C.09/11/2016 One Year Later

Great replacement when I had a trailer bearing go out and trash the old one.

by: Michael 12/20/2021

First time customer! Will be back! Very professional website design. Love the videos that go along with the parts. Customer service at its best! Thanks again and Merry Christmas!

by: Mike08/23/2019 One Year Later

This was a replacement for a customer..so far no come back.

by: David S.07/04/2017

Fast shipping. Needed these two washers for an old trailer. Hard to locate until I found etrailer. Thanks

David S. One Year Later

7/5/2018

Working fine. Trailer still being used.

by: Sweetland Trailer02/22/2017

Item is not common on newer trailers but you had in stock.

by: James H09/25/2017 One Year Later

Yes we was very happy with parts we ordered thank you!

by: Warren 09/18/2022

Great, couldn’t find it locally. Perfect fit ! Worked just fine

by: Ryan03/16/2018 One Year Later

Exactly what was needed

by: Mark11/24/2018 One Year Later

Perfect for my project.

by: Nick11/15/2018 One Year Later

Worked well

by: Lawrence 10/04/2022 One Year Later

Works as it should.

by: Steve09/19/2021 One Year Later

Perfection!

by: Jerry12/26/2018

The description was just what I needed and I got it fast

by: Ralph R05/29/2015

Great quality and quick delivery

by: john K10/19/2016

fast and exactly as pictured.

by: Mike C.06/03/2017

WasherS are perfect.

by: Dean 12/01/2020

Super fast shippers and product as adve rtised

Show More Reviews

See what our Experts say about this Redline Accessories and Parts

Do you have a question about this Accessories and Part?

What Is The Inner And Outer Diameter Of The Redline Washer Spindle Tongue # 165863
I went out in the warehouse and measured the Redline Washer Spindle Tongue # 165863. The overall diameter of the washer is 1-3/4 inches. The inner diameter is 1 inch.
view full answer...
Should There Be a Washer on Trailer Spindle Between Spindle Nut and Outer Bearing
There really should be a flat washer between the outer bearing of your hub and the nut that holds it on. The washer protects the back side of the bearing from the edges and points on the back side of the spindle nut. The Washer For 1 inch Spindle, # SW1000, is typically used on spindles that have a castle nut, like # 165686, and a cotter pin, # 165649. A D washer, # 5-23, would be used on a spindle that has a flat side and uses the same castle nut and cotter pin setup. A Tongue Washer,...
view full answer...
What is the Small Nub on Washer Spindle Tongue, # 165863, and What Does it Do
On the Spindle washer, # 1655863, that little nub on the inside is called the tongue. It is designed to prevent the washer from spinning and wearing out.
view full answer...
Spindle Washer Compatibility With 1 Inch Spindle Without D-Shape
Since you don't have the D-shaped spindle that will allow for a D washer, a regular washer for a 1 inch spindle like # SW1000 will work. This washer not having any type of tab will allow it to rotate and without proper grease could cause damage as with any other washer. Many axles come with this type of washer. Not having a washer and allowing the bearing to come in contact with the back of the castle nut would be a much bigger issue unless you have Dexter Axles which were made for use...
view full answer...
Should There Be a Washer on Trailer Spindle Between Spindle Nut and Outer Bearing
There really should be a flat washer between the outer bearing of your hub and the nut that holds it on. The washer protects the back side of the bearing from the edges and points on the back side of the spindle nut. The Washer For 1 inch Spindle, # SW1000, is typically used on spindles that have a castle nut, like # 165686, and a cotter pin, # 165649. A D washer, # 5-23, would be used on a spindle that has a flat side and uses the same castle nut and cotter pin setup. A Tongue Washer,...
view full answer...
Inner Wheel Bearing Recommendation for a Number 84 Spindle
The inner and outer bearing surfaces on a number 84 spindle are different diameters. The outer bearing will ride on a 1.00 inch diameter surface and the inner bearing will ride on a 1.378 inch surface. It sounds like you have the correct outer bearing and now are in need of the correct inner bearing. For that you would want the part # L68149 that you referenced. You will want to use a spindle washer. The washer protects the back side of the bearing from the edges and points on the back...
view full answer...
Correct Spindle Nut, Washer, and Cotter Pin for 7/8 Inch Diameter Spindle
Yes, the Washer Spindle Tongue part # 165863 will work with 7/8" diameter spindles. If you also need the castle nut and cotter pin as well we have these available as part # 165931 and part # 165649.
view full answer...
Replacement Spindle Washer For Dexter 2,000LB Trailer Axle
You should have a spindle washer between the outer bearing and the spindle nut. There are different washers depending on exactly what spindle you have. Washer For 1" Spindle # SW1000 D Washer for EZ Lube Spindles # 5-23 Washer Spindle Tongue # 165863
view full answer...
Trailer Spindle Washer with 1 Inch Inner Diameter
Dexter Tang Washer # 5-59 has an inner diameter of 1-3/4 inches. We do have several washer styles with 1 inch diameters though: # 5-101 # 5-57 # 5-23 # SW1000 # 165863
view full answer...
Is a Spindle Washer Needed Between the Spindle Nut and Outer Bearing on Dexter 5 on 4-1/2 Hubs
Yes, there should be a washer of some type between the spindle nut and the bearing on your trailer. The washer protects the back side of the bearing from the edges and points on the back side of the spindle nut. There are several types of spindle washers available depending on the spindle configuration on your trailer. The Washer For 1 inch Spindle, # SW1000, is typically used on spindles that have a castle nut, like # 165686, and a cotter pin, # 165649. A D washer, # 5-23, would be...
view full answer...
Availability of 1 Inch Keyed Spindle Washer
We have a few washers that would work for you. If you want the tang style that can be bent over the notch in the castle nut, go with # 5-101. If you're looking for the D washer used on EZ lube spindles, use part # 5-23. For a spindle with the grooved keyway in it, use part # 165863.
view full answer...
Tongue Washer Compatibility with Trailer Spindle and Tapered Bearings
The Tang Replacement Spindle Washer # 5-71 or the Washer Spindle Tongue # 165863 will fit into the groove of your spindle to keep the washer and nut from rotating. This gives you a similar outcome to the tang style washer that uses the cotter pin to hold it, but the idea is the stabilization of that washer that will keep slight pressure on the flat side of the tapered bearing to hold it in place. This is one style similar to a D style washer as well like Spindle Nut Kit for EZ Lube Axles...
view full answer...
Replacement Spindle Washers For An Old Trailer With 10k Axles
We carry a variety of different spindle washers so you'll want to measure your current washers and note the design to match it up to the correct design for your spindles: Replacement Spindle Washer - Tang Type for E-Z Lube # 5-101 Washer For 1" Spindle # SW1000 (most common) Tang Replacement Spindle Washer # 5-71 D Washer for EZ Lube Spindles # 5-23 Washer Spindle Tongue # 165863
view full answer...
What are the Dimensions of Spindle Tongue Washer 165863
The washer measures just under 1/8 inch thick and the OD is 1-3/4 inches and the ID is 1 inch. The tongue inside measures about 5/32 inch square.
view full answer...

Do you have a question about this Accessories and Part?

Info for this part was:

Expert Research:

Michael H

Expert Research:

Jeff D

Updated by:

Wilson B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.