Lippert Outriggers for Manual RV Steps

See what our Experts say about this Lippert Accessories and Parts

• What Do the Lippert Outriggers part # LC301704 Do
  Yes, the Lippert Outriggers part # LC301704 are exactly what you described. These attach to the bottom of the trailer frame and provide brackets for the RV steps to attach to.
  view full answer...
• Are Outriggers Needed to Install RV Steps on Cargo Trailer
  It's going to be much easier to install RV steps to a cargo trailer with a set of outriggers like the part # LC301704 instead of trying to attach them directly without. I'd recommend going with a set of these and you'll be best served.
  view full answer...
• Bracket Recommendation for RV Pull Out Steps
  The brackets we offer which are designed for pull out RV steps are the Outriggers like part # LC301704. We don't have a recommended way to interface these with a lift of any type but these might be able to be used for your application.
  view full answer...
• Bracket Recommendation to Replace 20 inch Wide RV Steps with 24 inch Wide RV Steps
  Wider steps can be installed on RVs but what you'll have to do most likely is remove the old brackets that steps used and install new Outriggers like part # LC301704 to give the new steps something they can attach to.
  view full answer...
• Recommended Outriggers For Stromberg-Carlson Manual Pull-Out Steps for RVs
  We do carry Outriggers, part # LC301704 that may be what you are looking for. These L-brackets mount to the steps with the included carriage bolts and then can be used to mount to the trailer. The LC301704 can be used with all double, triple, and quad Stromberg Carlson, Lippert, or Hickory Springs manual pull-out steps.
  view full answer...
  
• Distance Between Mounting Holes for Lippert and Stromberg Carlson Manual Step Outriggers
  Lippert manual step outriggers # LC301704 and Stromberg Carlson outriggers SM-01 both have the same measurements and hole spacing. I have included a picture showing these measurements for you.
  view full answer...
  
• Replacement Bolt-On Trailer Step Outrigger Mounting Brackets
  We do offer RV step outrigger mounting brackets, the Lippert # LC301704. These bolt on using included hardware. Part # LC301704 also fits only multi-step assemblies.
  view full answer...
• How Does Outrigger SM-01 Install on Frame of Trailer
  We don't have an install picture but what I can do is describe it. The portion of the # LC301704 with the round holes mounts to the bottom of the frame on your trailer with nuts and bolts or welding. They would need to be spaced at the width of your steps. Then the square hole side of the outrigger is used to run the included hardware through to attach to the step.
  view full answer...
  
• Lippert Outriggers For Lippert, Stromberg Carlson Or Hickory Springs Manual Steel Pull-Out Steps
  I believe the mounting brackets you're looking for, is the Lippert Outriggers for Manual RV Steps # LC301704 which will help you install your manual or RV steps on your RV. This works with Lippert, Stromberg Carlson, or Hickory Springs manual steel pull-out steps, and Lippert Tread Lite manual steps.
  view full answer...
• Do Lippert Outriggers Come with a Left and Right Bracket to Mount Steps
  When you order the Lippert Outriggers # LC301704 from us you will get 2 brackets that are mirror images of each other so they won't be the exact same thing as it looks like you received from the place that you ordered yours from. Ours will fit on either side of your steps so you can get them installed on your RV. I have attached a photo of our kit that you can check out.
  view full answer...
  
• Could Manual Pull-Out Steps # LC432690 Fit 2010 Grey Wolf Super Lite
  The Manual Pull-Out Steps # LC432690 are designed to fit the standard mounting brackets found on RVs like your 2010 Grey Wolf Super Lite by Cherokee. That said, there are sometimes variances in the widths of the brackets typically based on the number of steps on the assembly. This setup is designed to fit mounting bracket dimensions that are 27-1/2 inches wide outside to outside. Most likely that's what you have but worst case scenario you could weld these directly to your frame, have the...
  view full answer...
• Can Manual Pull-Out Step be Installed on a Horse Trailer
  Technically you can add any Manual Pull-Out Step like # LC432678 to your trailer. You may need to also add outriggers # LC301704 to the frame in order to get the step in the right position and if you can't attach it reasonably to the desired location.
  view full answer...
• How to Tell if the Pull-Out Step for RVs # LC432698 Will Fit a 2014 Cedar Creek 38CK 5th Wheel
  Most aftermarket RV steps will replace the OEM steps without modification. The same is the case for the Alumi-Tread Manual Pull-Out Step for RVs # LC432698 that you referenced. These steps do have a weight capacity of 300 lbs so they are pretty sturdy. I am attaching some photos that give the different dimensions of this step. You can use these to compare them with your current steps and brackets for fitment. If they happen to not have the same mounting dimensions you can always have the...
  view full answer...
  
• Are New Mounting Brackets Required to Install Double Step on RV in Place of Single Step
  The single step RV steps do have smaller mounting dimensions so if you are wanting to go with a double step to replace what you have what you'd need is the Lippert Manual Pull-Out Steps # LC432682 which is a double step that has a foot plate that provides solid traction. Since the mounting brackets of your RV are going to be too small you'll need outriggers too to go with this as part # LC301704 and you'll be set.
  view full answer...
• How to Determine if Lippert Triple Pull-Out Steps Fit Trailer
  The Lippert Manual Pull-Out Step for RVs - Triple # LC432690 might work for your Keystone trailer, but we do not have a database of each part put on each year, make and model of trailer. To find out if these steps will work, you are going to need to measure where your bolt hole centers are and ensure you have enough room for the mounting bracket to fit. These steps have mounting bracket dimensions of 27-1/2" wide x 16" tall x 12" deep. Otherwise, you will need to use the Outriggers for...
  view full answer...
• 3 Step RV Step Replacement Solution for Brackets 25-1/2 inches in Width
  All of the triple steps we offer like the part # LC432687 that you referenced are 27 inches in width. If you need a triple step you would need to have the mounting brackets on your trailer moved to accommodate these steps. Any qualified fabricator in your area should have no problem moving the mounting brackets to allow the steps to install. Or for a new set of mounts you could use the Outriggers part # LC301704.
  view full answer...
• Determining if Lippert Alumi-Tread Manual Pull-Out Steps # LC432698 Will Fit Keystone Montana
  The Lippert Alumi-Tread Manual Pull-Out Steps # LC432698 referenced in your question may work well on your 2017 Keystone Montana High Country. In order to verify that they will install perfectly in place of your existing assembly you will just need to take a couple of measurements. Trailer manufacturers do not typically do a good job of maintaining detailed specs on items like these so I was unable to verify the type and size of the assembly that is currently installed on your Keystone...
  view full answer...
  
• Pull Out Step Recommendation for Horse Trailer That Has 26 inch Tall Height
  The best option would be a fold out step setup for your horse trailer where you need a height of 26 inches. The Lippert manual pull out step part # LC432690 would be a fantastic option. When it's out you have 25 inches from the mounting bracket to the bottom step. To mount these you'll also want the outriggers part # LC301704.
  view full answer...
  
• Brackets Needed to Install Lippert Alumi Tread Steps part # LC432698 on Camper
  The Lippert Alumi Tread Steps part # LC432698 were specifically designed for use on fifth wheel campers so this would be a great choice. Most RVs will have the needed brackets but if not you would need to have the Outriggers part # LC301704 installed on the frame of the RV as well.
  view full answer...
• Distance Between Top of Lippert Manual Steps and Top of Guide Rail for Mounting Clearance
  I went out to the warehouse and found that from the top of the mounting bracket to the top of the guide rail measured 5-3/8" for the Lippert # LC432682 steps. I have attached a photo to demonstrate this.
  view full answer...
  
• How to Determine if Alumi-Tread Manual Pull-Out Step Will Fit 2018 Montana Legacy
  You just need to verify that you have enough space for the mounting bracket dimensions of 28" wide x 16" tall x 12" deep under the doorway of your 2018 Montana Legacy for the Alumi-Tread Manual Pull-Out Step # LC432698. If you already have mounting brackets then you need to also ensure that the mounting hole spacing is 26-3/4" x 7" but if you don't have mounting brackets then you need the Outriggers # LC301704. I have attached a review video where these dimensions are shown for you to check out.
  view full answer...
  
• Triple Steps that Can Fit 2010 Forest River Georgetown
  The great thing about RV steps like the triple step part # LC432690 is that they are universal enough in how they install that they can basically be made to fit any RV including your 2010 Forest River Georgetown. At worst you might have to move the mounting hardware you have now or have these steps welded in place but they will fit your motorhome. If you wanted to install new mounting brackets you'd then need the part # LC301704.
  view full answer...
• Can 3-Step RV Step Replace 2-Step Version
  When you go from the 2-step versions of the Hickory Springs steps to the 3 step the mounting brackets do get a bit wider. The part # LC432687 which is the three step version is about 2 inches wider which means you'd need to move your current outriggers or install new ones with the part # LC301704.
  view full answer...
• Double Step for 2015 Jayco 23RB RV
  The great thing about the Lippert Component RV steps # LC432682 is that they are designed to fit the standard RV step brackets found on most RVs like your 2015 Jayco 23RB. If your current steps are double steps like this most likely the brackets are the correct dimension at 25-1/2 inch. Or you could use the outriggers # LC301704 if you needed a different dimension.
  view full answer...

Do you have a question about this Accessories and Part?