Lippert Outriggers for Manual RV Steps Spec Review Video

We don't have an install video but what I can do is describe it. The portion of the #LC301704 with the round holes mounts to the bottom of the frame on your trailer with nuts and bolts or welding. They would need to be spaced at the width of your…

We have outriggers like the part #LC301704 which make installing pull out steps like the Lippert Steps part #LC432682 much easier. Your appear to be broken at the weld. The #LC301704 installs with included hardware.

From the picture you provided it appears you have the Lippert Kwikee 42 Series Double Tread Electric Step #LC372779. Unfortunately, we don't have replacement parts for the steps. Before purchasing make sure the mounting bolt pattern matches.…

Hello David. It sounds like you are referring to the quick release pin for the MORryde Safe-T-Rail part #MR54BR. This pin is 1/4" in diameter and has 2" of usable length. If you need one, we have them on our site as part #MR35DR.

The only step covers we currently offer are from Prest-O-Fit and would only wrap around just the step portion. These covers wrap around the step and tighten in place with springs for a custom fit for a variety of step depths and will allow the steps…

The correct replacement steps for your 2013 Coachmen Mirada is the Kwikee Electric RV Step Complete Assembly #LC372261. This comes with all new parts including the motor, control unit, switch kit, and light. Attached is a review video of this step…

I spoke with the manufacturer to ensure the measurements were correct and found that the chart on the page for #LC432690 is incorrect. It does require 27-1/2" of space for the mounting brackets. Both the #LC432690 and #LC432696 will be too big…

The difference is between just the MORryde Locking RV Storage Box #MR43RR and when you add the brackets at their widest setting. Just the box measures 25-3/4" but when you add the mounting brackets is when you'll see that 27-3/4" width…

We do offer RV step outrigger mounting brackets, the Lippert #LC301704. These bolt on using included hardware. Part #LC301704 also fits only multi-step assemblies.

Yes, that is absolutely normal and is actually mentioned in the installation instructions. To install the MORryde Safe-T-Rail Telescoping RV Hand Rail #MR54BR you're going to need to: -Remove the existing "Lend-A-Hand" rail. Once…

All of the triple steps we offer like the part #LC432687 that you referenced are 27 inches in width. If you need a triple step you would need to have the mounting brackets on your trailer moved to accommodate these steps. Any qualified fabricator in…

The Manual Pull Out Steps part #SMFP-2100 that you mentioned are going to fit your 2011 Palomino Puma 27KFQ only when you use the Lippert Outriggers for Manual RV Steps #LC301704. If you need a smaller step you can use #SMFP-2120 instead. The…