Derale Radiator Adapter Fittings for Ford and Lincoln

See what our Experts say about this Derale Accessories and Parts

• Radiator Adapter Fittings for Installing a Transmission Cooler on a 1996 Ford F-250/350
  For your 1996 Ford truck there are threaded fittings in the radiator which are input and out put from/to the transmission cooler. The fittings allow you to replace the existing fittings with ones that have flared ends for the hose in a supplemental cooler so you do not have to cut and flare lines. Use kit # D13014 if the radiator uses 1/4 inch or 3/8 inch threaded fittings, or use kit # D13024 for 1/2-20 inverted flare fittings. You do not need both kits unless you are not sure of what...
  view full answer...
• Radiator Adapter Fitting Needed for a 1997 Ford Expedition
  Here at etrailer.com we have two different radiator adapter fittings for the 1997 Ford Expedition. The adapter that you need will depend on the size of the transmission line on your Expedition. For a vehicle with 1/2 inch-20 thread on the transmission line fitting, use kit # D13024 or for 5/8 inch-18 thread fitting, use kit # D13025.
  view full answer...
• How to Install the Derale Plate-Fin Engine Oil Cooler Inline with another Oil Cooler
  That depends on the size of the hose that is used to install your current oil cooler. If the line is the same as what comes with the # D15405 that you purchased all you would need is 2 sets of the # D13024 so that you could install the cooler inline with your current cooler. You would need to thread each set of the fittings together and tighten them down so that you would have two male end fittings. From there you would need to cut your current oil cooler hose and install the # D13024...
  view full answer...
• Transmission Cooler Recommendations for 2010 Ford F150 4.6L
  I'd agree with the fact that you want the best cooling performance. Traveling through the mountains, especially when towing can be hard on your transmission. This is why we routinely recommend getting the largest cooler that will fit in the space available. The most efficient place to install a transmission cooler is between the grille and the radiator or A/C condenser. The Derale # D13504 measures 11 inches wide by 12 inches tall by 7/8 inches thick, so if you have that amount of space...
  view full answer...
• Radiator Adapter Fittings Needed for a 2004 Ford Explorer XLT 4.0 L iter V6
  The correct Ford/Mercury radiator adapter for your 2004 Ford Explorer is the Derale Radiator Adapter Fittings for Ford, Lincoln and Mercury, item # D13025. This adapter is designed to fit 5/8 inch inverted flare fittings. The Derale Radiator Adapter Fittings for Ford and Lincoln, item # 13024, is designed to fit 1/2 inch -20 inch inverted flare fittings.
  view full answer...
• What Transmission Cooler Should I use on my 2017 Ford Expedition
  You can choose many of the different coolers for your 2017 Ford Expedition. The 8an and 6an fittings are for other models instead I recommend using the Derale Series 8000 Plate-Fin Transmission Cooler Kit w/Barb Inlets - Class IV part # D13504 and the Derale Radiator Adapter Fittings for Ford and Lincoln part # D13024. This will give you the components you need for a direct in line connection.
  view full answer...
• Transmission Cooler Recommendation for 2006 Ford F-150 5.4 V8
  The transmission cooler I recommend for your 2006 Ford F-150 with a 5.4 liter V8 is the Derale part # D13504 because due to the larger size of this cooler and it being a plate fin cooler it is very efficient. If your transmission lines have fittings that are 1/2"-20 thread you'd need the adapter part # D13024 or if they are 5/8"-18 you'd need the fitting adapter part # D13025.
  view full answer...
• Transmission Cooler Recommendation for 2004 Ford F-150 Towing in Mountains
  Do you mean 4 wheel low 1 or low 2 gearing for your truck? You should keep the truck in 2 wheel drive when towing if you are on dry pavement. Putting the vehicle into 4 wheel drive will cause damage if you are on dry pavement. It would be a really smart idea to install a transmission cooler on your truck if you haven't installed one already. For that I recommend the Derale part # D13503 which is larger and very efficient. You'll also want the fittings part # D13024 and # D13025 to make...
  view full answer...
• Does Transmission Cooler Install for 2004 Ford F-150 Require Hose Fittings
  You will want to use the hose fittings part # D13024 and # D13025 when installing the transmission cooler part # D12903 on your 2004 Ford F-150. They will make the process much easier and allow you to not have to cut and flare any hard lines.
  view full answer...
• Transmission Cooler Recommendation for 2004 Ford F-150 with 5.4 liter V8
  For your 2004 Ford F-150 with a 5.4 liter engine the Derale transmission cooler part # D13503 would be a great option. You'd also need the fittings part # D13024 and # D13025 and you'd be set in that regard as well.
  view full answer...
• Transmission Cooler Recommendation for 1999 Ford F-150 with 5.4 liter V8
  For towing a trailer like what you mentioned with a 1999 Ford F-150 a supplemental transmission cooler would be a great option that we would highly recommend. Most likely your truck came with a factory cooler but typically they do not do a very good job at all. Especially around the age of your truck. The newer vehicles have better coolers but the older ones are adequate at best for light duty applications. I'd recommend the part # D13503 as this is a very popular and efficient cooler...
  view full answer...
• Appropriate Replacement Transmission Cooler for 1987 Ford F-250 4X4 With C-6 Transmission
  Transmission and oil coolers are not vehicle-specific so you can use the largest one that will fit in the available space you have to mount it. You can start by measuring the available mounting space within the engine compartment and then select the largest cooler that will fit. An aftermarket cooler is a great way to provide supplementary cooling in addition to that provided by the OEM cooler in the radiator. The Derale # D13504 you referenced is a high-efficiency Class IV plate-fin type...
  view full answer...
• Transmission Cooler Recommendation for 2007 Ford F-150 with V6 Engine
  The Derale cooler part # D13503 is a fit for your 2007 Ford F-150. This cooler is very universal in what it can fit and your Ford truck would work well with it. For the quick install fittings the part # D13025 would be what you need if you have 5/8"-1/8 lines or part # D13024 for 1/2-20 fittings.
  view full answer...
• Installation of Transmission Cooler in 2010 Ford F-150
  The Derale Transmission Cooler # D13612 will install after the radiator of your 2010 Ford F-150. You'll need to find the return line which will be the cooler of the transmission lines when the engine is warmed up. If you have 5/8 inches-18 transmission line fittings you would use the Transmission Cooler Fitting, # D13025. If you have the 1/2 inches-20 transmission line fittings you would use Transmission Cooler Fitting, # D13024.
  view full answer...
• Do Transmission Coolers Install the Same Way on Every Vehicle
  Transmission cooler installations are not vehicle specific because transmission coolers themselves are not vehicle specific so they general way they install will be the same. What is different is where you may need to mount the cooler, whether or not you will have to cut and flare lines, and what you might need to move out of the way to install the cooler in the most efficient place. All of these things are different from vehicle to vehicle. The path of the transmission fluid should be...
  view full answer...
• Stacked Plate Transmission Cooler Recommendation for F150 Ford 2010
  The best transmission cooler will be the largest cooler you can fit in front of your radiator. Transmission coolers work best when mounted at the very front of compartment, (in front of the radiator)BEHIND THE GRILLE. You will want to measure this space to know how much room to have to install a cooler. The Derale 19-Row Stacked Plate Transmission Cooler Kit # D13403 you referenced measures 13 inches wide x 7-5/16 inches tall x 2 inches deep. As long as this cooler fits behind the grille...
  view full answer...
• Transmission Cooler Recommendation for 1996 Ford Bronco with 302
  For your 1996 Ford Bronco the Derale transmission cooler part # D13504 would be an excellent option. This larger cooler will do a great job keeping the transmission fluid much cooler. This cooler measures 11" Wide x 12" tall x 7/8" deep. To make the job easier you'd then want the fittings part number # D13014 and # D13024. These will allow you to install the cooler without having to cut or flare any line.
  view full answer...
• What Transmission Cooler Fitting Will Fit On 2002 Ford F150 With 4.2 Liter V6
  The transmission cooler fittings you have referenced, # D13018, are not the correct part for your 2002 Ford F150 with 4.2L V6. For the 2002 Ford F150 with 4.2 L V6, it depends on what size transmission line fittings you have. If you have 5/8 inches-18 transmission line fittings you would use the Transmission Cooler Fitting, # D13025. If you have the 1/2 inches-20 transmission line fittings you would use Transmission Cooler Fitting, # D13024.
  view full answer...
• Transmission Cooler Options for a 1996 Ford F-250 with 7.3 Liter Diesel Engine
  We currently have 6 transmission coolers that are recommended for your 1996 Ford F-250 with 7.3 liter diesel engine. I have included a link to them below. Even though the Derale Hyper-Cool Remote Transmission Cooler Kit with Fan, -6 AN Inlets - Class V, # D13960, is not on that list, transmission coolers are not technically vehicle specific, so you could install it on your truck with the proper sized fittings. The D13960 comes with -6 AN x 3/8 inch hose barb adapter and one of the recommended...
  view full answer...
• Transmission Cooler Recommendation For A 1989 Ford F-250 With 460 c.i. Engine And C6 Transmission
  Thanks for checking back with us for your towing needs. For your 1989 Ford F-250 with the 7.5L (460 c.i.) engine and towing a 7500 lbs trailer I would recommend using a Class IV transmission cooler. The Class IV rating will handle towing up to 12000 lbs. The Derale Series 8000 Transmission Cooler Kit, # D13504, that you have referenced is a plate-fin cooler and is one of the best Class IV coolers we carry. The Derale transmission cooler will fit inline with your factory transmission cooler. The...
  view full answer...
• Which Derale Radiator Adapter Fitting Kit for a 2000 Ford Taurus Wagon
  I spoke with my contact at Derale and the reason there are two different hose fitting recommendations is because there are two possible diameter hoses that are on the 2000 Ford Taurus Wagons. To determine the correct fitting you will need to know the threaded diameter of the transmission fluid line fitting in your vehicles radiator. If you need a 3/8 inch fitting you would need a Derale Radiator Adapter Fitting Kit, part # D13014. If you need a 1/2 inch fitting I would recommend a Derale...
  view full answer...
• Transmission Cooler Recommendation for 1988 Ford F-350 with 460 Cubic Inch Engine
  I'd recommend a larger transmission cooler for your 1988 Ford F-350 with a 460 cubic inch engine like the Derale part # D13504 which measures 11" Wide x 12" tall x 7/8" deep. This is a larger plate-fin style cooler which is going to be very efficient and provide the best cooling. To make the install easier you'll need the fittings # D13014 and # D13024 which make attaching the hoses to the radiator fittings much easier since they thread right on.
  view full answer...
• Radiator Adapter Fittings for Derale Series 8000 Transmission Cooler on 2010 Ford F-150
  There are two different options for your 2010 Ford F-150 for adapter fittings to use with the Derale Series 8000 Plate-Fin Transmission Cooler Kit # D13504. Using a different adapter size is not going to cause any issues, and you are going to need to know the size of your fittings, or measure to determine due to there being two potential options for your 2010 F-150: - 1/2"-20 Thread: Derale Radiator Adapter Fittings for Ford and Lincoln # D13024 - 5/8"-18 Thread: Derale Radiator Adapter...
  view full answer...
  
• Transmission Cooler Recommendation for 2003 Ford F-150 with 5.4 liter V8
  Yes we have transmission coolers that will work great installed on your 2003 Ford F-150 with a 5.4 liter V8 engine like the larger and very efficient Derale # D13504 that requires the adapters # D13024 and # D13025.
  view full answer...

Do you have a question about this Accessories and Part?